Engine Blocks & Parts | Summit Racing

Ford Performance Parts 5.2L Gen 3 Coyote Aluminum Engine Blocks

Ford Performance Parts 5.2L Gen 3 Coyote aluminum engine blocks are upgraded versions of the Gen 1 and Gen 2 blocks (M-6010-M52 and M-6010-M52A). They feature higher flow oil squirters to provide added piston cooling and improved crankcase windage. All features are finish-machined, including head deck and crank bore. Get revved up for the improved high performance casting of Ford Performance 5.2L Gen 3 Coyote aluminum engine blocks and their ability to support higher horsepower engine builds! Features, items, and specs: * 94.0mm bore * Rod bolt path is clearance-machined in crankcase of block * Utilizes longer (187mm) cylinder headbolts to provide greater clamping force (requires longer headbolt kit: M-6067-M501280 or M-6067-M52B head changing kit) * Water jacket below cylinder bore updated to add more material for strength * Intake side of bore at deck surface includes cast-in brace (improves strength of cylinder wall and head gasket sealing) * Block features plasma-transferred wire arc spray weld liner coating (improved durability and heat transfer, reduced friction, and weight savings compared to previous Mustang GT aluminum blocks) * Cylinder liner coating doesn't require unique piston rings or piston material * Cylinder bores finish-honed and ready to assemble * Cross-bolted nodular iron main bearing caps—uses 12mm cylinder head bolts * Block has provisions for piston oil squirters (included) * Plugs and dowels

5.0 out of 5 stars ( 1 )

$2,494.99

Chevrolet Performance 454 C.I.D. Bare Engine Blocks

Direct from Chevrolet Performance are these 454 c.i.d. bare engine blocks. These are special Gen. VI bare iron blocks with 4.25 in. cylinder bores with 4-bolt main bearing caps. They have machined fuel pump pads, a one-piece rear main seal design, and standard 454 deck height. The maximum cylinder bore on these blocks is 4.25 in. plus .060 in. O.S., and will require the "Gen V/GenVI" design one-piece oil pan.

4.89 out of 5 stars ( 9 )

$2,672.08

ARP High Performance Series Main Bolts

ARP High Performance Series main bolts are rated at 180,000 psi and a popular premium replacement for OEM fasteners. Designed to meet the exacting standards and demands of professional engine builders, ARP bolts are forged from 8740 chromoly steel and feature a reduced wrenching head, large underhead radius, and rolled threads for the utmost in reliability. The threads are rolled after heat-treating which gives them about 2,000 percent better fatigue strength than most main bolts that are threaded prior to heat-treating. Hardened parallel-ground washers are included with each kit.

4.87 out of 5 stars ( 181 )

$33.99

—

$414.99

Allstar Performance Small Block Rear Main Seal Adapters

Allstar Performance small block rear main seal adapters can be used to convert 1986 and later blocks with a one-piece rear main seal to accept an older-style, 2-piece seal crankshaft. These are essential when installing an early-style (1985 and earlier) crankshaft into 1986 and later blocks. These rear main seal adapters are available in different applications and can be used with a one-piece or 2-piece oil pan, depending on your application. They are made from billet aluminum and include hardware.

4.5 out of 5 stars ( 8 )

$132.99

—

$199.99

Chevrolet Performance Bellhousing Dowel Pins

Chevrolet Performance bellhousing dowel pins allow you to easily align your transmission into the block. Correct alignment provides clean clutch release, while maximizing pilot bearing and transmission life. Chevrolet Performance bellhousing dowel pins also help to reduce shifter problems.

Not Yet Reviewed

$7.99

Ford Performance Parts Main Stud and Bolt Kits

Do you need main cap fasteners for your Ford engine? Ford Performance Parts main stud and bolt kits are available for a variety of Ford V8s. Their kits contain all main bolts, studs, washers, and nuts for one block. Secure your main caps the right way with Ford Performance Parts main stud and bolt kits. Note: some bolts and studs are torque-to-yield and must be replaced after each use.

5.0 out of 5 stars ( 1 )

$45.99

Earl's Performance Oil Cooler Block-Off Plates

Earl's Performance oil cooler block-off plates are billet covers—built with an extra 1/8 in. NPT port that can be used for an oil pressure gauge or a turbo oil supply port. The 1/8 in. port is located on the top to provide extra header clearance. These oil cooler block-off plates are designed to fit most GM LS/LT oil pans. Earl's Performance oil cooler block-off plate feature: * Billet aluminum construction with black anodized finish * Includes block-off plate, O-ring seal (no gasket required), and mounting screws

4.5 out of 5 stars ( 10 )

$57.59

—

$64.75

Chevrolet Performance Oil Cooler Delete Plates

Chevrolet Performance oil cooler delete plates are designed to cover the oil cooler outlet. They're made from aluminum and are available for a variety of specific vehicle and/or engine applications.

4.55 out of 5 stars ( 11 )

$26.99

—

$46.99

Ford Performance Parts Expansion Plugs

When rebuilding your Ford engine, you'll want to use the proper expansion plugs for the job. Ford Performance Parts expansion plugs are designed as exact replacement for your factory and aftermarket blocks.

4.67 out of 5 stars ( 3 )

$19.99

Pioneer Performance Freeze Plugs

These Pioneer performance freeze plugs are designed by engine rebuilders, for engine rebuilders. Several types of freeze plugs are offered in a choice of materials and sizes for a large variety of applications.

4.75 out of 5 stars ( 59 )

$6.99

—

$220.99

ATK High Performance Chrysler Gen III Hemi Bare Blocks

ATK High Performance Chrysler Gen III Hemi remanufactured bare blocks are an economical option for your build! They're fully machined and ready to assemble. Here are product details: ATK 220A Engine Specs: * Block: Machined GEN III Hemi 5.7L (2004-2008) * Bore: 3.927 in. (Pistons size vary, final honing may be required) * Displacement: 345 cubic inch * Main journal type: Mopar GEN III Hemi * Engine block material: Cast iron * Engine block style: OEM * Engine block deck height: Standard deck * Main bolt style: 2-bolt * Main caps included: Yes * Main cap material: Powdered metal * Main cap fasteners included: Yes * Main bearings included: No * Camshaft bearings: Dura-Bond, installed and clocked to OEM position * Freeze plugs: Brass, installed and sealed * Oil galley plugs: Installed and sealed * Camshaft bearing line boring in Standard * Pos 1: 2.2921 in. – 2.2931 in. * Pos 2: 2.2765 in. – 2.2775 in. * Pos 3: 2.2607 in. – 2.2617 in. * Pos 4: 2.2449 in. – 2.2459 in. * Pos 5: 1.7187 in. – 1.7197 in. * Main, line honed: 2.7522 in. - 2.7525 in. * Cylinder honing I.D.: 3.9270 in. - 3.9278 in. * Minimum deck height: 7.880 in. - 7.870 in.

Not Yet Reviewed

$1,319.99

Chevrolet Performance Bowtie Big Block Chevy Cast Iron Engine Blocks

Chevrolet Performance Bowtie big block Chevy cast iron engine blocks are CNC-machined. The race-prepared blocks feature blind head and accessory mounting bolt holes, a deck configuration that enables the use of any big block Chevy cylinder head—and cylinder bores that may be safely bored to a 4.600 in. maximum diameter, while maintaining a .250 in. minimum cylinder wall thickness. These engine blocks differ from the production-machined Bowtie versions in certain areas; they start from raw castings and are not "conversions." They also use a rear seal adapter to convert the Gen V/VI one-piece rear main seal to a Mark IV type 2-piece seal that facilitates the use of a widely available Mark IV style crankshaft. The intermediate caps also feature 16 splayed outer bolts, which anchor the caps into the strongest section of the blocks and prevent bearing cap movement under high loads. The main oil gallery on these blocks is relocated and enlarged to a 9/16 in. diameter to allow increased oil flow through the block. These Bowtie blocks have inner head bolt bosses, which allow for better retention of the cylinder heads in high-horsepower applications when the cylinder heads "lift" from the blocks due to high cylinder pressures. Order the style and deck height preferred for your application.

4.83 out of 5 stars ( 6 )

$4,085.68

—

$4,291.31

Melling Performance Cylinder Sleeves

Melling uses top-grade materials to produce these performance cylinder sleeves. They provide longer life with less distortion and enhanced reliability. These proven sleeves have been used successfully for years in heavy-duty diesel and performance engines. Melling Performance cylinder sleeves are compatible with all ring materials and are designed for a variety of bore sizes.

5.0 out of 5 stars ( 2 )

$27.99

—

$102.99

Top Street Performance Trussed-Style Engine Valley Covers

Top Street Performance trussed-style engine valley covers will add some flair in an unlikely place under your hood. These billet aluminum valley pan covers are lightweight—and available in a choice of black or chrome finish. Hardware is included for an easy installation. Order the trussed-style engine valley cover that's designed to fit your year/make and engine application.

Not Yet Reviewed

$165.42

—

$204.94

Dura-Bond Engine Hardware Finishing Kits

The engine tear down and cleaning process can lead to broken, bent, distorted, or lost service parts. These items can be troubling to any engine re-builder, especially when they are difficult to obtain. That is why Dura-Bond offers many of the hard-to-find OEM service parts you need. All hardware is manufactured to precise OEM dimensions for exact fit.

4.55 out of 5 stars ( 75 )

$20.99

Summit Racing™ SPC Engine Blocks

Summit Racing™ SPC Engine Blocks are aftermarket V8 Engine Blocks made for "Street, Performance, or Competition." These new clean sheet designed aftermarket blocks are cast in a modern state-of-the-art German foundry on brand new molds and machined in USA on modern high-speed machining centers that can hold the tightest of tolerances. Why start your engine build with a dirty, old, worn-out production block that needs hundreds or thousands of dollars of machine work--when you can start with a new heavy-duty casting full of high-performance features. We ship these blocks mostly finished but leave the cylinder bore .005" undersize, your machine shop will have to hone them for proper size. You can rest assured that you have a great foundation for your engine build. Check out the features below! Additional details: • Available Versions Include: GM Small Block, GM LS, GM Big Block (coming Soon,) Ford Windsor 5.0 and 351W • Cast in Germany at a Tier 1 OEM foundry • Made with class 35 Iron Alloy, Higher tensile strength and harder than competitors' class 30 • Machine-finished in USA on precision hi-speed machining centers- All dimensions are very accurate! • Priority main oiling systems & Siamese Cylinder bores • Blind head bolt holes • 4-bolt main caps, 180,00 PSI main bolts included

5.0 out of 5 stars ( 13 )

$2,249.99

—

$3,399.99

Derale LS Engine Oil Cooler Adapter Kits

Derale LS engine oil cooler adapters are designed to give a non-thermostatic option to consumers with high performance LS engines. They feature -10 ORB inlet/outlet ports for maximum oil flow and are rated to flow up to 20 gpm. The adapters include two 1/8 in. NPT ports that can be used for additional accessories and or sensors.

4.0 out of 5 stars ( 3 )

$102.36

—

$204.74

On Sale

Moroso Fuel Pump Pushrods

Lightweight Moroso fuel pump pushrods feature hardened ends to reduce reciprocating mass, which prevents pump arm float and subsequent fuel starvation. They're ideal for use in drag, Oval Track, and street performance applications.

5.0 out of 5 stars ( 9 )

$36.99

$33.29

Summit Racing™ Extreme Duty Main Cap Bolts

Summit Racing™ Extreme Duty main cap bolts are engineered to withstand the stress and abuses that high-horsepower engines endure. These fastener kits come with all necessary bolts, washers, lubricant, and instructions to ensure maximum performance and reliability. Order the hardware recommended for your year/make and engine application. Extreme Duty fasteners feature: * 190,000 psi tensile strength minimum * High-strength chromoly steel utilized for all products * Precision manufacturing processes ensure consistent product performance * All studs are twice straightened to guarantee straightness * Threads are rolled after heat treatment for high strength * Tensile and yield strength tested after thread rolling * Uniformly applied black oxide surface finish * Anti-rust oil coating to protect fasteners from corrosion

Not Yet Reviewed

$40.99

—

$61.99

PRW Billet Steel Main Girdles

PRW billet steel main girdles help eliminate the block flex and cap walk that occurs as a result of stress while under extreme loads, or during nitrous oxide power bursts in high performance engines. PRW main stud girdles are manufactured from premium quality 1045 billet steel, and include high-quality PRW fasteners and hardware. Select the girdle designed for your vehicle's engine.

3.0 out of 5 stars ( 2 )

$174.59

—

$252.72

On Sale

Holley Block-Off Kit for T4 Wet Cooler Feed Ports

Holley Performance offers block-off kits for T4 wet cooler feed ports. They're ideal for LT4 engine applications, such as those found on Corvette and Camaro applications from 2015 and up. The engine water pump aluminum block-offs are red anodized for protection.

Not Yet Reviewed

$27.01

$17.56

PRW Billet Steel Main Caps

PRW billet steel main caps raise the bar in the high performance industry. The main caps are precision-machined from high strength steel, which offers both the proper balance of strength and flexibility to allow transfer of increased shock loads to the crank and bearings. These main caps stabilize the entire crankshaft rotating assembly in your high-performance engine by eliminating annoying cap walk, and reducing main bearing bore distortion. With a combination of top-quality performance components and reasonable pricing, we know that when you receive your new PRW billet steel main caps, you will have no trouble seeing what the excitement is all about!

2.33 out of 5 stars ( 3 )

$207.03

—

$341.77

Mahle Original Cylinder Head Dowel Pins

Mahle Original cylinder head dowel pins will keep gaskets in position and properly align cylinder heads to your engine block. Unfortunately, dowel pins are often overlooked when performing a rebuild or upgrading cylinder heads. Don't make that mistake—use Mahle cylinder head dowel pins for precise alignment and leak-free operation.

Not Yet Reviewed

$23.99

Dart Iron Eagle Mopar Gen III Cast Iron Bare Blocks

Designed from a clean slate approach, Dart now offers the Iron Eagle Mopar Gen III cast iron bare blocks that address the shortcomings of the Hemi Gen III platform, and are the ideal candidate for hot rodders, drag racers, circle track competitors, off-roaders, and high performance marine enthusiasts. By utilizing conventional style main caps with Gen III rotating assemblies and related components, Dart has addressed the windage and oil control problems, along with revising the cooling and oiling passages for improved flow. Non-VVT and VVT version offerings are available. Get everything you ever wanted out of your Gen III Hemi engine with the Iron Eagle Mopar Gen III cast iron bare blocks by Dart! Key features of Dart Iron Eagle Gen III Hemi cast iron engine blocks: * Manufactured from superior strength cast iron * Priority main oiling system with two lifter crossovers and restrictor provisions * Siamese cylinder bores with extra thick walls * Extra-thick decks ensure reliable head gasket seal * Blind head bolt holes available in 7/16 in. standard or 1/2 in. upgrade * Scalloped water jackets increase flow around cylinders for better cooling * Clearance for 4.050 in. stroke with steel rods * Billet steel 4-bolt main caps 1-5, center 3 main caps splayed * Main studs standard * Gen III Hemi style motor mounts * Provisions for OE stock roller lifters and cam * Uses stock timing covers * All OE bolt holes for starter, water pump, etc. * Block can be machined for VVT or non-VVT camshafts * Parts kit included (32000050 for non-VVT, or 32000051 for VVT); note parts kits do not include cam bearings

Not Yet Reviewed

$4,610.99