Availability
Showing In Stock Items. Show All 30 Items.
Improved Racing factory oil cooler delete kits remove the factory water-to-oil 'heater' so your vehicle can run with a more efficient air-to-oil cooling system. These kits come with everything needed to cap-off the radiator hose barb and water pump fittings from the factory setup. An oil cooler adapter (sold separately) is necessary to replace the factory water-to-oil cooler and allow for connecting an air-to-oil cooler. Please verify the fitment and order the Improved Racing factory oil cooler delete kit designed for your application.
Not Yet Reviewed
$14.90
Rebuilding your GM LS engine? Replace those old main cap bolts with our Summit Racing™ LS main cap bolt kits for peace of mind. Our kit includes all 30 bolts to get the job done. They meet the same high-quality and specifications as your factory bolts.
( 15 )
$41.99
—
$149.99
Dart SHP Special High Performance LS Next Pro cast iron bare blocks continue the evolution of their LS Next platform with superior strength. With full skirt designs, priority oiling systems, and other excellent features, these SHP LS Next Pro blocks are the perfect upgrades for your factory LS blocks, as well as ideal starting points for drag racers, circle track competitors, off-roaders, and high performance marine enthusiasts. Dart SHP LS Next Pro cast iron bare blocks feature: * Superior strength 220 BHN cast iron * Steel 4-bolt main caps with upgraded ARP main studs * Lifter oil crossover with restrictor provision * 6-bolt per cylinder capability * 4.000 in. up to 4.185 in. bore * Factory oil filter provision * 8-counterweight machining * Full skirt design * Priority main oiling * Siamese cylinder bores * Thick decks ensure reliable head gasket seal
( 1 )
$4,699.99
Seal up your engine while looking good with one of these ICT Billet LS lifter valley covers. They are designed to fit (Non-DoD) engines and are milled from a solid block of aerospace-quality billet aluminum. The covers offer outstanding block rigidity, while the precision-machined underside provides an excellent seal using the existing factory O-ring. Their wide chamfered edges ensure adequate intake manifold runner clearance and they include the necessary flush mount, Allen head stainless steel mounting hardware.
( 71 )
$109.99
The perfect foundation for your Boss engine--Ford Performance Parts Boss 302 engine blocks! They're built stronger than the originals to make your high performance build a success. Designed as replacements for the legendary Boss 302 and Boss 351 blocks, they use the latest technology and manufacturing techniques. Cast from diesel-grade iron with siamesed bores, thick cylinder walls and decks, Boss block strength is far superior to any Ford production block. Boss 302 blocks are available in standard and Big Bore versions that support engine sizes up to 363 c.i.d. Proven around the world, both on the track and on the street; all Ford Performance Boss 302 blocks are cast and machined to the highest industry standards in the USA. Features include: * Big Bore version features 4.125 in. bore capacity, finished at 4.115 in. rough bore * Standard bore version is finished at 3.990 to 3.995 in. rough bore with 4.125 in. bore capacity * 8.2 in. deck height, finished at 8.200 in. plus .010 to .015 in. * Optimized cylinder wall length for stroker applications up to 3.5 in. with no grinding or clearancing (depends on crank/rod manufacturer) * Splayed 4-bolt mains on 2, 3, 4, main caps * 2-bolt main on first and fifth main caps * Main bearing bores finished to low limit * Finished lifter bores * Machined to accept factory roller lifter guides and lifter guide retainer * Fits factory 1979-95 Mustang oil pan with custom oil pickup tube, part number: M-6622-BOSS302 * NASCAR inspired front oil feed on both lifter galleys * Revised cooling system passageways * Increased bulkhead material * Threaded core and galley plugs (straight thread port plugs with O-ring) * Require special length 1/2 in. head bolts M-6065-BOSS or head studs M-6014-BOSS recommended with M-6049-X306/307/Z304DA heads * Designed for M-6049-X306//X307/C3/D3/Z304DA cylinder heads * Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Uses common O.D. cam bearings M-6261-J351/R351 * Unique cam plug M-6026-S351 included * M-6051-S331 or M-6051-CP331 head gasket recommended * Uses stock-type timing cover (M-6059-D351 recommended; includes fuel pump provision) * Retains clutch cross shaft pivot hole * Original-style oil filter location * Original motor mount boss locations * Original bell housing pattern * Approximate weights: Big Bore 163 lbs.; standard bore 175 lbs.
( 3 )
$2,265.99
Making the weak stronger--fit your Ford 2-bolt main caps with Trick Flow® main stud race-version girdles. What makes them different from their other Ford main stud girdles? These girdles feature 1/2 in. thick tool steel construction, a black oxide finish, and studs--not bolts--for easier installation, even clamping forces, and reduced chance of main cap "walking". If you're racing, tying together your Ford factory 2-bolt main caps with main stud race girdles from Trick Flow® is a move towards strong winning performance!
( 5 )
$256.99
Trick Flow® main stud girdles will strengthen Ford's factory 2-bolt main cap assemblies. Crafted from tool steel and finished with black oxide, these girdles come with main cap bolts and a provision for an oil pump pickup tube hold-down. Tie your Ford caps together for better performance with main cap girdles from Trick Flow®.
( 13 )
$214.99
—
$258.99
ICT Billet bellhousing dowel pins are steel alignment pins offered in two lengths—factory and longer than factory. Made from mild steel, ICT pins fit between engine and transmission.
( 6 )
$22.99
Billet Specialties LS valley covers are engineered to fit LS2, LS3, LS7, and LSX blocks when using a carbureted intake manifold. They feature a ribbed design and are precision-machined from 6061 T6 aluminum and polished to a mirror finish to match other ribbed accessories. The covers include high-quality ARP 12-point hardware for the perfect finishing detail. The valley covers feature a provision machined into the back for the factory breather box and two 1/8 in. NPT ports for use with external breathers, oil separators, or catch cans. Designed for use with an OEM factory gasket (not included).
Not Yet Reviewed
$218.95
Milodon aftermarket main bearing caps not only strengthen factory 2-bolt blocks, but they will also add a measurable degree of strength to 4-bolt blocks. They are made from precision-machined, high-strength steel, which has the proper balance of strength and flexibility to allow for the transfer of increased shock loads to the crank and bearings. The secret is in the side bolts. They are angled so that they pull from the side walls of the block and not from the flimsy main web area. They'll also load the cap against the register step, which will prevent dreaded "cap walk." They can be installed by anyone with a hand drill and a tap and they come with the necessary bolts, washers, and drill bushing to complete the installation. Milodon main cap kits are available in your choice of angled or straight bolts.
( 20 )
$119.95
—
$459.95
ICT Billet oil cooler block-off plates are the perfect solution for removing the factory oil cooler from the side of the oil pan, giving you improved frame rail clearance. They allow you to retain the original pan without the need for the factory oil cooler, making them ideal for custom builds or tight engine bays. Made from high-quality, aerospace-grade billet aluminum for strength and longevity, the block-off plates are designed with integrated seals to provide a secure, leak-free fit without the hassle of additional sealants. The innovative two-piece design ensures oil continues to circulate properly, maintaining optimal engine performance. These block-off plates are easy to install and come with all the necessary components for installation, including the plate, seals, and hardware.
Not Yet Reviewed
$179.99
Go Fast Bits offers DV Plus Diverter Valves with TMS (Turbo Management System) Advantage for a wide range of vehicles, particularly imports. GFB's DV+ solution couldn't be simpler—keep what works and replace what doesn't. GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles. The solenoid coil itself from the factory-fitted valve is great (the ECU opens it faster than any pneumatic valve so why replace it?)—but the weak point is the valve mechanism itself. So GFB's DV+ solves this problem by replacing just the valve parts with an anodized billet aluminum housing fitted with a brass piston machined to exacting tolerances. The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Other manufacturers' products involve replacing the entire system with a traditional pneumatic valve, requiring long vacuum hose runs, additional parts for tapping into the intake manifold vacuum—plus either a different solenoid valve to actuate the pneumatic valve, or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install. GFB's DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn't cause compressor surge/turbo flutter. Order the model recommended for your vehicle. Additional notes: * Retains the factory solenoid coil for seamless integration * Replaces plastic valve parts with metal for reliability and strength on chipped engines * Exclusive "pilot-actuated" valve mechanism for rapid response at high boost
( 6 )
$166.50
When rebuilding your Ford engine, you'll want to use the proper expansion plugs for the job. Ford Performance Parts expansion plugs are designed as exact replacement for your factory and aftermarket blocks.
( 3 )
$14.99
Philadelphia Racing Products oil cooler block-off kits close off your factory oil cooler, and give you the availability of a pressure port for your gauges. Machined from 6061 billet aluminum, anodized black for corrosion protection, and fitted with an O-ring for secure sealing, PRP block-off plates are offered with or without a 1/8 in. NPT port.
Not Yet Reviewed
$26.79
Chevrolet Performance dowel pins are OEM replacement pins for your GM block. These GM-recommended parts offer the same durability, quality, and reliability of the original factory component. Order with the confidence of knowing that Chevrolet Performance dowel pins will provide the fit and performance of OE specifications.
( 3 )
$2.99
Gator Fasteners main stud kits are designed for stock to performance built engines. When building a high horsepower Cummins engine, the factory main bolts can only handle so much power. Factory bolts can stretch and unfortunately cause what's called main cap walk or loss of torque. Both these conditions can contribute to major engine issues. These heavy-duty main studs eliminate these issues and add strength to the bottom end of your engine. When it comes to reliable engine assembly, don't get caught with sub-par parts. Gator studs are what you need! Each stud has rolled threads and is constructed from 8740 steel with an added proprietary element for the ultimate in durability and high-tensile strength. Order the Gator stud kit designed for your application.
( 1 )
$224.99
—
$414.99
Clearance
Cummins by Mopar offers expansion plugs for hundreds of Dodge and Ram diesel engine applications from 1989 and up. They're manufactured from premium materials in different styles for an OE fit and factory performance. The freeze plugs help to prevent leaks. Order the model recommended for your vehicle.
Not Yet Reviewed
$11.99
$3.50
Crown Automotive engine block coolant plugs are manufactured from heavy-duty steel that meets OEM standards for proper stock replacement. These plugs install simply in the vehicle's factory location. Whether you're doing a quick flush or need a replacement fastener, Crown engine block coolant plugs will do trick!
Not Yet Reviewed
$1.99
—
$9.99
On Sale
World Products Motown blocks are a great starting point for your performance engine. They feature many improvements over factory castings, including thicker cylinder walls, nodular iron main caps, and special bosses for front-feed oil systems. They will clear strokes up to 4.00 in. without clearancing and are available in different main and bore sizes to suit your needs.
( 1 )
$3,781.95
Summit Bucks
ACDelco GM Genuine Parts replacement bolts are available for a variety of applications, including transmission torque converter housings. Installing factory-recommended hardware helps to ensure the same performance, durability, and service life you expect from General Motors.
( 15 )
$3.99
Cylinder Works cylinders are your powersports alternative to OEM or re-plating. These standard bore cylinders are brand new—not remanufactured or replaced—and are nickel silicon carbide-plated cast aluminum to provide long life. They're precision-honed to the exact size to make your piston installation easier. Cylinder Works offers dirt bike and ATV enthusiasts quick and affordable access to direct fit replacement cylinders. Order the bore size recommended for your application.
Not Yet Reviewed
$575.66
ARP main stud kits help eliminate main cap walk/fretting and protect the threads in your engine block. They include studs made from 8740 chromoly steel and heat-treated in-house to 190,000 psi tensile-strength rating. The precision J-form threads are rolled after heat-treat for much stronger threads than the competition. Kits come complete with hardened parallel-ground washers and high-quality nuts. Add confidence in the strength of your engine build with the ARP main stud kit designed for your application.
( 390 )
$242.99
Milodon main stud kits are required where maximum gasket loading and minimal wear and tear are exerted on the block threads. These engine studs are premium-grade, race-quality studs that are created from aircraft-quality 8740 chromoly steel right in Milodon's own plant. They are ground and thread-rolled after heat treatment to ensure the exacting tolerances that Milodon requires for all of their fasteners. This ensures strength and consistent torque readings. The tensile strength of these premium fasteners is 190,000 psi, which is more than adequate for the most demanding applications. All kits come complete with 4130 heat-treated, parallel-ground washers and high-strength nuts.
( 20 )
$74.95
—
$154.95
Howards Cams extreme billet main caps are precision CNC-machined from superior-quality low-carbon 1020 billet material. They come available as stock replacements (straight bolt) or with splayed outer bolt holes. The splayed caps feature 10 degree angled outer holes to positively reinforce and tie the block together. Front, rear and center caps are all available. Use all the Howards Cams caps together for the ultimate in bottom-end stress and flex management. Howards Cams main caps feature side notches for easy removal and are proudly 100 percent manufactured in the USA. Line boring is required after installation.
( 14 )
$125.99
—
$271.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
