Availability
Chevrolet Performance LSX Bowtie engine blocks are designed for the advanced competition engine builder. They feature Siamese cylinder bores and a semi-finished deck height. The blocks can accept a maximum stroke of 4.250 in., a maximum bore of 4.250 in., and can support displacements of 454 cu. in. or more. LSX Bowties feature cast iron construction with an orange powdercoat finish. They accept all Gen III and IV LS-style cylinder heads, crankshafts, camshafts, and other components. Order the model with deck height and other options needed for your application. Additional features and specs include: * Front oil feed lines that can be plugged or restricted for mechanical flat tappet or mechanical lifter applications * Can be safely machined to 9.200 in. deck height * 1054 billet steel 6-bolt main bearing caps * 6-bolt cylinder head bolt pattern * Cam bores that can be machined to accept 60mm roller bearings * Can be machined for larger diameter lifters * External oil pump feed at the rear * Added 7th transmission bolt hole to work with early-style GM transmissions * Can accept a front motor plate for racing use * Threaded freeze plugs that can be used for external heaters or coolers * Windowed main bulkhead
( 1 )
$4,550.15
—
$5,565.20
ARP High Performance Series main bolts are rated at 180,000 psi and a popular premium replacement for OEM fasteners. Designed to meet the exacting standards and demands of professional engine builders, ARP bolts are forged from 8740 chromoly steel and feature a reduced wrenching head, large underhead radius, and rolled threads for the utmost in reliability. The threads are rolled after heat-treating which gives them about 2,000 percent better fatigue strength than most main bolts that are threaded prior to heat-treating. Hardened parallel-ground washers are included with each kit.
( 175 )
$35.99
—
$414.99
ARP Pro Series main bolts are application-specific and rated at 190,000 psi. Designed for use in competition engines, as well as to meet the exacting standards and demands of professional engine builders, ARP bolts are forged from 8740 chromoly steel and feature a reduced wrenching head, large underhead radius, and rolled threads for the utmost in reliability. The threads are rolled after heat-treating which gives them about 2,000 percent better fatigue strength than most main bolts that are threaded prior to heat-treating. Hardened parallel-ground washers are included with each kit.
( 14 )
$47.99
—
$372.99
On Sale
The engineering team at World Products collaborated with leading Ford racers and professional engine builders and developed the Man O'War replacement blocks for the popular 351 small block. They are available in two deck heights, to ensure compatibility with all popular OEM and aftermarket cylinder head/intake manifold combinations. World Products' new Man O'War Ford blocks have been created utilizing contemporary CAD/CAM manufacturing technology, for more precisely-detailed blocks than were ever before possible through conventional foundry methods. And they're made to QS-9000 quality standards, the highest in the industry.
( 3 )
$4,571.32
$4,114.19
On Sale
The engineering team at World Products collaborated with leading Ford racers and professional engine builders to develop the Man O'War replacement blocks for the popular 302 small block. They are available in two deck heights to ensure compatibility with all popular OEM and aftermarket cylinder head/intake manifold combinations. World Products' new Man O'War Ford blocks have been created utilizing contemporary CAD/CAM manufacturing technology for more precisely detailed blocks than were ever before possible through conventional foundry methods. And, they're made to QS-9000 quality standards, the highest in the industry.
Not Yet Reviewed
$4,494.05
—
$4,571.32
$4,044.64
—
$4,114.19
Clearance
L.A. Sleeve cylinder sleeves continue to be the solution for many riders, racers, and engine builders everywhere as an inexpensive way to reinvigorate your engine without having to resort to new cylinder replacement. The sleeves are manufactured from centrifugally-spun moly 2000 iron alloy castings, which ensures an easier installation and trouble-free boring (inside diameter must be bored and honed after install). And, by re-sleeving your engine's worn or seized cylinders during a rebuild, you'll save serious money while also enjoying a more dependable and long-lasting engine. The sleeves are available in nearly a hundred bore sizes; order the model recommended for your powersports application.
Not Yet Reviewed
$113.99
$57.50
These Wiseco cylinder sleeves are designed to re-sleeve your worn or seized cylinders. They are an economical solution available for riders, racers, and engine builders everywhere. The centrifugal castings used in these sleeves are manufactured from the highest quality materials ensuring ease of installation, trouble-free boring, and a dependable, long-lasting engine. The CNC machining holds exacting tolerances and are precision ground diameters greatly reduce installation time.
Not Yet Reviewed
$75.99
—
$188.99
On Sale
World's Motown blocks are without a doubt the most feature-laden, engine builder friendly, cast iron blocks on the market. And because of their superior temperature control and rock-solid stability, experts claim they're worth up to 20 hp more than other blocks on the market! At first glance, one of the more noticeable differences between the World Motown and OEM Chevy blocks are the 'bulges' at each cylinder. That's because the Motowns have thicker cylinder walls, and the water jackets have been expanded to provide required cooling. Order the model and options preferred for your application. Important features are as follows: * Made from high-density cast iron * 9.025 in. deck height with .600 in. minimum thickness * Dry sump valley scavenge lines drilled * Clearanced for 4.000 in. stroker crankshafts (H-beam steel rods) * Integral mounts for spin-oil filter * Dry sump systems can feed from front or rear of block * Available with 4-bolt nodular or splayed billet caps * Can be bored to 4.200 inch maximum * Water jackets expanded for better cooling * Standard Chevy cam location and cam bearings * OEM starter, fuel pump, and engine mounts (dual) * Blind tapped head bolt holes for extra integrity * 100 percent compatible with OEM parts * Indexed lifter bores (can use standard-height lifters) * Main caps are located by dowels (not OEM outside register) * Weight: Approximately 190 lbs.
( 1 )
$4,549.46
—
$4,736.26
$4,094.51
—
$4,262.63
The engine tear down and cleaning process can lead to broken, bent, distorted, or lost service parts. These items can be troubling to any engine re-builder, especially when they are difficult to obtain. That is why Dura-Bond offers many of the hard-to-find OEM service parts you need. All hardware is manufactured to precise OEM dimensions for exact fit.
( 74 )
$10.99
—
$55.99
Save time and money with Engine Works engine finishing kits. During an engine tear down and the cleaning process can lead to broken, bent, distorted, or lost service parts. These items can be troubling to any engine re-builder, especially when they are difficult to obtain. That is why Engine Works offers many of the hard-to-find OEM service parts you need in each engine hardware finishing kit. Available for small and big block Chevrolet and small block Ford engines, all hardware in each engine finishing kit is manufactured to precise OEM dimensions to make engine assembly easy.
Not Yet Reviewed
$38.71
Edelbrock LS bare race blocks are designed to meet the needs of today's high performance engine builders and racing enthusiasts. They are available in standard and tall deck height combinations and are engineered for maximum clearance around a 4.600 in. stroke crankshaft. With their unique design, Edelbrock engineers were able to minimize windage in the rotating assembly, leading to superior engine lubrication at higher rpm. To make them friendly for existing race applications, these blocks contain both factory and motor plate race mounts for Gen I, II, III, and IV engines. Each LS bare race block receives a CT scan to ensure maximum performance and consistency. Standard features include: * Designed from aircraft-quality A357 T-6 aluminum * Siamese cast bore walls (4.125 in. or 4.165 in. diameter) with press-in cast iron sleeves * Machined with 55mm cam bearing journal * Available in standard (9.240 in.) and tall (9.750 in.) deck heights with beefy deck thicknesses (.500 in. standard/.750 in. tall deck); standard (5.87 in.) and tall (6.38 in.) deck cylinder sleeves are available * 6-head bolt design with full water jacket around cylinder walls; large windows in the valley allow access to an inboard 6th head bolt * Block design includes large front and rear -12AN side feeds for serious dry sump setups * Material for oversized lifters with lifter bosses are designed to clear tie bar-style lifters
Not Yet Reviewed
$6,904.95
With displacements up to 455 cubic inches, the Race Series small block Chevy aluminum bare blocks are an ideal starting point for any project that involves sprint cars, modifieds, late model stock, dragsters and unlimited competition classes. Incorporated features include: * Standard 9.025 in., tall deck 9.325 in. and 9.500 in. versions allow for greater versatility. * Raised camshaft .391 in. (4.912 in. camshaft to crankshaft centerlines) provides more clearance for stroker cranks and eliminates need for fragile small base circle cams. Option for .434 raised cam also available * Relocated oil pan rails are spread .400 in. per side (.800 in. wider than stock) to increase crank/rod clearance and reduce windage losses * Siamesed cylinders: Standard 4.000 in. or 4.125 in. cylinder can be safely bored to 4.185 in. (ductile iron sleeves and extr-thick walls prevent cracking and produce excellent ring seal * Oil pan bolt holes are relocated in line with main caps to eliminate interference with rotating assembly * Main bearing bores are available for 350 (2.45 in.) and 400 (2.65 in.) bearings allow engine builders to maximize crankshaft strength and minimize friction * 4 bolt billet steel main caps have splayed outer bolts minimize bearing bore distortion * Big block camshaft bearings allow use of cams with larger base circle diameter to improve strength and resist twisting with cam driven pumps * Dual starter mounts allow starter to be mounted on either side of block for chassis and oil pan clearance * Front and rear external oil inlets, crossover and restrictor provisions to simplify plumbing with external pump * Scalloped outer water jacket walls improve coolant flow around the cylinder barrels to equalize temperatures * Coated cam bearings, freeze plugs and dowels are included
Not Yet Reviewed
$6,999.99
—
$7,949.99
Rebuild your Ford block with Ford Performance Parts cylinder bore sleeves. These are direct-fit replacement sleeves for Ford Z351 aluminum cylinder blocks. Who better to help you service your block right than the builders--Ford Performance Parts?
Not Yet Reviewed
$1,166.99
—
$1,191.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
