Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Engine Blocks & Parts
Showing In Stock Items. Show All 55 Items.
Derale LS Engine Oil Cooler Adapter Kits
Derale LS engine oil cooler adapters are designed to give a non-thermostatic option to consumers with high performance LS engines. They feature -10 ORB inlet/outlet ports for maximum oil flow and are rated to flow up to 20 gpm. The adapters include two 1/8 in. NPT ports that can be used for additional accessories and or sensors.
( 3 )
$102.36
—
$204.74
Earl's Performance Oil Cooler Block-Off Plates
Earl's Performance oil cooler block-off plates are billet covers—built with an extra 1/8 in. NPT port that can be used for an oil pressure gauge or a turbo oil supply port. The 1/8 in. port is located on the top to provide extra header clearance. These oil cooler block-off plates are designed to fit most GM LS/LT oil pans. Earl's Performance oil cooler block-off plate feature: * Billet aluminum construction with black anodized finish * Includes block-off plate, O-ring seal (no gasket required), and mounting screws
( 10 )
$57.59
—
$64.75
ARP Rear Motor Cover Fasteners
ARP rear motor cover fasteners are designed to attach the rear motor cover on your Chevrolet LS series engines. They are available in your choice of steel or stainless steel, and with either hex or 12-point fastener head styles.
( 4 )
$23.99
—
$24.99
Canton Racing Main Cap Girdles
Back in the day, Ford engine block castings held up fine against 220 hp--but you couldn't go racing! Canton Racing has designed these main cap girdles to reinforce the alignment of the main caps and counter the limited webbing and weaknesses of those stock blocks. These main cap supports are laser-cut from 1/2 in. to 5/8 in. steel and feature CNC-machined mounting holes and rod notches for stroke clearance. Canton Racing main cap girdles tie directly to the caps, eliminating the need for bushings, spacers, or machining of the main caps for installation. These main cap girdles are black oxide finished for corrosion resistance and all hardware is included to get you racing.
( 18 )
$369.00
—
$498.00
On Sale
Holley LS Valley Covers
Holley LS valley covers are the latest accessories offered for the GM LS engine platform. These covers install between the two banks of cylinder heads, depending on your usage of knock sensors, displacement on demand, and active fuel management. They're available in a cast aluminum finned design to match Holley's popular valve covers, as well as a billet aluminum trussed version for a race-inspired look. The valley pan covers are offered in a variety of finishes.
( 2 )
$306.95
$276.25
—
$293.95
Summit Racing™ LS Finned Aluminum Valley Covers
The final detail to enhance the appeal of your LS engine--Summit Racing™ LS finned aluminum valley covers. Fabricated from aluminum, they are available with a natural or polished finish, or black powdercoated with machined fin tops for great contrast and looks. The material, finishes, and classic fin design of our Summit® LS intake valley plates offer the ideal touch to dress up your engine area.
( 1 )
$60.99
—
$65.99
Ford Performance Parts Cam Cover Ball Stud Kits
Ford Performance Parts cam cover ball stud kits allow for a coil cover attachment on all 2011-17 5.0 4 V F-150 Coyote engines. These steel hex head/ball stud-style fasteners are OEM quality and consist of six ball studs per kit. One kit is required per engine. Washers are not included (sold separately).
( 2 )
$19.99
PRW Billet Steel Main Girdles
PRW billet steel main girdles help eliminate the block flex and cap walk that occurs as a result of stress while under extreme loads, or during nitrous oxide power bursts in high performance engines. PRW main stud girdles are manufactured from premium quality 1045 billet steel, and include high-quality PRW fasteners and hardware. Select the girdle designed for your vehicle's engine.
( 2 )
$230.13
—
$252.72
Top Street Performance Finned Aluminum Engine Valley Covers
If you've dressed up your engine but there's just something missing, add some style in an unlikely place with a finned cast aluminum valley pan cover from Top Street Performance. The lightweight covers are available in a choice of black and polished finishes. Order the model for your application. Notes: Will fit LS1 and LS6 engines. No knock sensor or displacement on demand provisions.
Not Yet Reviewed
$74.06
—
$86.42
On Sale
Moroso Deck Plug Kits
Moroso deck plug kits are designed to reduce upper cylinder wall distortion. They install into the water passage holes in the deck of the block. The plugs will require the tapping of the water holes, and engine blocks will need to be decked after installation is complete.
( 1 )
$24.99
$22.49
ARP Main Stud Kits
ARP main stud kits help eliminate main cap walk/fretting and protect the threads in your engine block. They include studs made from 8740 chromoly steel and heat-treated in-house to 190,000 psi tensile-strength rating. The precision J-form threads are rolled after heat-treat for much stronger threads than the competition. Kits come complete with hardened parallel-ground washers and high-quality nuts. Add confidence in the strength of your engine build with the ARP main stud kit designed for your application.
( 395 )
$363.99
ACDelco GM Genuine Parts Engine Oil Fill Caps
ACDelco GM Genuine Parts engine oil fill caps provide the perfect OE replacements without breaking your budget. They are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Choose the cap style designed for fitment on your particular engine block.
( 12 )
$22.99
PRW Main Cap Girdles
PRW main cap girdles are engineered to help eliminate the block flex and cap walk that occurs as a result of stress while under extreme loads, or during nitrous oxide power bursts in high performance engines. PRW main cap girdles are manufactured from premium-quality 1045 billet steel. These kits include high-quality PRW fasteners and hardware.
( 3 )
$230.13
ARP Powersports Main Cap Studs
Why use ARP main cap studs for your motorcycle or UTV? They're machined from 8740 chromoly steel, heat-treated to 190,000 psi tensile strength, and precision J-form thread-rolled to create fasteners with the strongest threads available. The studs eliminate main cap walk and fretting—and offer the ability to obtain more accurate torque readings, easier engine assembly, and the proper alignment of caps. Order the set recommended for your powersports machine!
Not Yet Reviewed
$183.99
Derale LS Engine Oil Cooler Block-off Adapters
Derale LS engine oil cooler block-off adapters can replace your stock GM adapter in order to furnish more 1/8 in. NPT ports. The two extra ports can be used for additional accessories and/or sensors. These block-off adapters are designed with an ultra-low profile to clear most header applications, and can withstand up to 200 psi.
Not Yet Reviewed
$64.35
Improved Racing Oil Cooler Adapters
Improved Racing oil cooler adapters have a low-profile for more header clearance. The adapters are machined from a single piece of billet aluminum and black anodized. For additional clearance with reliable sealing, they come with aluminum gaskets fitted with Viton® seals, and the adapter mounting holes are counter-bored so the mounting bolts fit flush with the adapter surface. Select Improved Racing oil cooler adapters are also available with a built-in thermostat. Oil coolers help prevent the oil from getting too hot, but are also prone to lowering oil temperatures too much, especially in colder weather or during highway driving. The rebuildable thermostat speeds warm-up and helps reduce engine wear and horsepower losses by preventing oil temperatures from dropping below optimal levels. Features and benefits * 100 percent bolt-on solution; no fabrication, bending, or line modification is required * Viton® seals throughout for maximum reliability * Oil exiting the adapter is filtered oil * 6061 T-6 billet aluminum construction with black MIL-A-8625 Type II anodized finish * Standard female -8 AN O-ring boss threads for optional anodized adapter fittings in your choice of -8 AN, -10 AN, or -12AN lines * Depending on application, includes port(s) for oil sensors or turbo oil supply * Includes all necessary hardware * Limited lifetime warranty
( 10 )
$159.00
Summit Racing™ Rear Main Seal Housings
These Summit Racing™ rear main seal housings are the correct aluminum housing for Chevrolet 1-piece rear main seals. Whether you're replacing a damaged housing or building a project from scratch, these high quality housings will assure an easy installation.
Not Yet Reviewed
$298.99
Philadelphia Racing Products AN Block Adapters
When using a remote-mounted water pump, you have to make the connection to the block. The easiest way to do that is with Philadelphia Racing Products AN block adapters. They're CNC-machined from 6061 billet aluminum and anodized for protection and appearance. Each adapter is O-ringed for a tight seal and includes stainless hardware.
Not Yet Reviewed
$58.99
—
$63.99
Top Street Performance Trussed-Style Engine Valley Covers
Top Street Performance trussed-style engine valley covers will add some flair in an unlikely place under your hood. These billet aluminum valley pan covers are lightweight—and available in a choice of black or chrome finish. Hardware is included for an easy installation. Order the trussed-style engine valley cover that's designed to fit your year/make and engine application.
Not Yet Reviewed
$165.42
—
$204.94
S&S Cycle 97 in. Big Bore Kits
S&S Cycle 97 in. big bore kits will increase the displacement of 88 in. engines to 97 in., are easy to install, and require no machining or re-balancing. Using an 11-fin design, these pre-finished cylinders closely resemble the OEM shape and are ready to install. Order an S&S Cycle 97 in. big bore kit—and take your stock engine case as big as it'll go! Features of the S&S Cycle 97 in. big bore kits: * The 97 in. big bore kits for 88 in. motors yield excellent results with stock cylinder heads * Feature the same silver or black wrinkle powder-coat as stock, so they match the stock finish of the engine * Specifications: 3.927 in. bore, 4 in. stroke, 97 in. displacement, and 9.7:1 compression ratio with stock heads (9.3:1 compression ratio with S&S 89cc heads or 10.7:1 with S&S 79cc heads) * Feature the largest bore (3.927 in.) that can safely be used in a cylinder with stock spigot diameter * Included S&S cylinders feature a much stronger cast iron liner to stand up to the added power * Easy installation: no need to bore or split existing cases, just swap the cylinders *Kit includes cylinders, pistons, rings and gaskets (head, base and exhaust) * For best performance, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning is required
Not Yet Reviewed
$1,287.95
Clearance
Mopar Replacement Expansion Plugs
Mopar Replacement expansion plugs help restore original performance with the proper fit, form, and function. They feature high-quality materials and strict design requirements that meet or exceed OE specifications—critical to ensuring an easy installation and dependable service. Choose the Mopar Replacement expansion plugs designed for your application and help guard your engine against freeze damage.
Not Yet Reviewed
$33.99
$15.50
S&S Cycle 110 in. Power Packages
S&S Cycle 110 in. Power Packages are the ideal combination of performance and savings to transform your Twin Cam HD without breaking the bank. Bump the early Twin Cam from late 96ci or 103ci to 110ci, as well as add matched cams/cam plate/oil pump and everything else a high performance cam chest needs to reliably make big power. Features: * 4 in. bore bolt on cylinder and piston kit * 10.5:1 compression * Wrinkle black finish * S&S 585 Easy Start cams in either gear or chain version * TC3 oil pump * TC3 cam plate * S&S cam chain tensioners or outer cam drive gears * Quickee adjustable pushrods with tubes * S&S precision tappets * Low-friction ductile cast iron liner * Bolts in with no machining, balancing, or splitting the crankcases * Cylinders fit to pistons--no machining required * All parts required to upgrade to gear drive cam or hydraulic tensioners in one easy to order part number
Not Yet Reviewed
$3,396.95
Twin Power Cylinders
Twin Power offers OEM replacement cylinders for your motorcycle. Each Twin Power cylinder is designed to meet or exceed OEM specifications. These cylinders are available in a black or natural finish. Cylinder material and liner material vary depending on the application. Twin Power cylinders are the quality replacement your motorcycle deserves to keep it running like new.
Not Yet Reviewed
$453.99
World Products Motown LS Water Return Kits
World Products Motown LS water return kits consist of quality components needed to plumb your Motown LS block for cool performance. They include a 6061 T-6 billet aluminum Moroso thermostat housing, and PBM Performance red/blue anodized aluminum fittings with either their Pro-Lok blue rubber or Pro-Flo stainless steel braided hose.
Not Yet Reviewed
$351.10
