Engine Blocks & Parts | Summit Racing

Summit Racing™ Oil Cooler Block-Off Plates

Cover your oil cooler outlet with Summit Racing™ oil cooler block-off plates. Our covers are machined from billet aluminum and are clear anodized for added durability and looks. They are available with or without ports and include mounting hardware.

5.0 out of 5 stars ( 6 )

$24.99

—

$25.99

Derale LS Engine Oil Cooler Adapter Kits

Derale LS engine oil cooler adapters are designed to give a non-thermostatic option to consumers with high performance LS engines. They feature -10 ORB inlet/outlet ports for maximum oil flow and are rated to flow up to 20 gpm. The adapters include two 1/8 in. NPT ports that can be used for additional accessories and or sensors.

4.0 out of 5 stars ( 3 )

$102.36

—

$204.74

Earl's Performance Oil Cooler Block-Off Plates

Earl's Performance oil cooler block-off plates are billet covers—built with an extra 1/8 in. NPT port that can be used for an oil pressure gauge or a turbo oil supply port. The 1/8 in. port is located on the top to provide extra header clearance. These oil cooler block-off plates are designed to fit most GM LS/LT oil pans. Earl's Performance oil cooler block-off plate feature: * Billet aluminum construction with black anodized finish * Includes block-off plate, O-ring seal (no gasket required), and mounting screws

4.78 out of 5 stars ( 9 )

$57.59

—

$64.75

On Sale

Holley LS Valley Covers

Holley LS valley covers are the latest accessories offered for the GM LS engine platform. These covers install between the two banks of cylinder heads, depending on your usage of knock sensors, displacement on demand, and active fuel management. They're available in a cast aluminum finned design to match Holley's popular valve covers, as well as a billet aluminum trussed version for a race-inspired look. The valley pan covers are offered in a variety of finishes.

5.0 out of 5 stars ( 2 )

$306.95

$276.25

—

$293.95

Holley Block-Off Kit for T4 Wet Cooler Feed Ports

Holley Performance offers block-off kits for T4 wet cooler feed ports. They're ideal for LT4 engine applications, such as those found on Corvette and Camaro applications from 2015 and up. The engine water pump aluminum block-offs are red anodized for protection.

Not Yet Reviewed

$27.01

Derale LS Engine Oil Cooler Block-off Adapters

Derale LS engine oil cooler block-off adapters can replace your stock GM adapter in order to furnish more 1/8 in. NPT ports. The two extra ports can be used for additional accessories and/or sensors. These block-off adapters are designed with an ultra-low profile to clear most header applications, and can withstand up to 200 psi.

Not Yet Reviewed

$64.35

Philadelphia Racing Products AN Block Adapters

When using a remote-mounted water pump, you have to make the connection to the block. The easiest way to do that is with Philadelphia Racing Products AN block adapters. They're CNC-machined from 6061 billet aluminum and anodized for protection and appearance. Each adapter is O-ringed for a tight seal and includes stainless hardware.

Not Yet Reviewed

$58.99

—

$71.99

World Products Motown LS Water Return Kits

World Products Motown LS water return kits consist of quality components needed to plumb your Motown LS block for cool performance. They include a 6061 T-6 billet aluminum Moroso thermostat housing, and PBM Performance red/blue anodized aluminum fittings with either their Pro-Lok blue rubber or Pro-Flo stainless steel braided hose.

Not Yet Reviewed

$351.10

Improved Racing Oil Cooler Adapters

Improved Racing oil cooler adapters have a low-profile for more header clearance. The adapters are machined from a single piece of billet aluminum and black anodized. For additional clearance with reliable sealing, they come with aluminum gaskets fitted with Viton® seals, and the adapter mounting holes are counter-bored so the mounting bolts fit flush with the adapter surface. Select Improved Racing oil cooler adapters are also available with a built-in thermostat. Oil coolers help prevent the oil from getting too hot, but are also prone to lowering oil temperatures too much, especially in colder weather or during highway driving. The rebuildable thermostat speeds warm-up and helps reduce engine wear and horsepower losses by preventing oil temperatures from dropping below optimal levels. Features and benefits * 100 percent bolt-on solution; no fabrication, bending, or line modification is required * Viton® seals throughout for maximum reliability * Oil exiting the adapter is filtered oil * 6061 T-6 billet aluminum construction with black MIL-A-8625 Type II anodized finish * Standard female -8 AN O-ring boss threads for optional anodized adapter fittings in your choice of -8 AN, -10 AN, or -12AN lines * Depending on application, includes port(s) for oil sensors or turbo oil supply * Includes all necessary hardware * Limited lifetime warranty

4.2 out of 5 stars ( 10 )

$159.00

Philadelphia Racing Products Oil Cooler Block-Off Kits

Philadelphia Racing Products oil cooler block-off kits close off your factory oil cooler, and give you the availability of a pressure port for your gauges. Machined from 6061 billet aluminum, anodized black for corrosion protection, and fitted with an O-ring for secure sealing, PRP block-off plates are offered with or without a 1/8 in. NPT port.

Not Yet Reviewed

$22.99

Improved Racing Factory Oil Cooler Delete Kits

Improved Racing factory oil cooler delete kits remove the factory water-to-oil 'heater' so your vehicle can run with a more efficient air-to-oil cooling system. These kits come with everything needed to cap-off the radiator hose barb and water pump fittings from the factory setup. An oil cooler adapter (sold separately) is necessary to replace the factory water-to-oil cooler and allow for connecting an air-to-oil cooler. Please verify the fitment and order the Improved Racing factory oil cooler delete kit designed for your application.

Not Yet Reviewed

$14.90

Derale Oil Galley Bypass Plugs

From the leader in performance cooling, Derale oil galley bypass plugs for Gen III and IV LS engines helps improve flow, oil pressure, and completely block dirty engine oil from bypassing the filter with a triple O-ring design. A direct replacement for the plastic OEM barbell plug, they are made from 6061 T-6 billet aluminum and black anodized. Derale plugs have three preinstalled Viton® O-rings and threaded #6-32 holes for easy installation.

4.6 out of 5 stars ( 5 )

$21.49

Go Fast Bits DV Plus Diverter Valves with TMS Advantage

Go Fast Bits offers DV Plus Diverter Valves with TMS (Turbo Management System) Advantage for a wide range of vehicles, particularly imports. GFB's DV+ solution couldn't be simpler—keep what works and replace what doesn't. GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles. The solenoid coil itself from the factory-fitted valve is great (the ECU opens it faster than any pneumatic valve so why replace it?)—but the weak point is the valve mechanism itself. So GFB's DV+ solves this problem by replacing just the valve parts with an anodized billet aluminum housing fitted with a brass piston machined to exacting tolerances. The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Other manufacturers' products involve replacing the entire system with a traditional pneumatic valve, requiring long vacuum hose runs, additional parts for tapping into the intake manifold vacuum—plus either a different solenoid valve to actuate the pneumatic valve, or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install. GFB's DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn't cause compressor surge/turbo flutter. Order the model recommended for your vehicle. Additional notes: * Retains the factory solenoid coil for seamless integration * Replaces plastic valve parts with metal for reliability and strength on chipped engines * Exclusive "pilot-actuated" valve mechanism for rapid response at high boost

5.0 out of 5 stars ( 6 )

$173.70

ATI Block Plugs

ATI now offers PTFE anodized, 6061 billet aluminum water jacket and oil galley plugs. Trying to shed some weight off the nose of your race car? Don't put heavy, rusty, steel plugs in your new or freshly overhauled steel block; you can save almost 2 lbs. and look good while doing it with ATI block plugs!

1.0 out of 5 stars ( 1 )

$27.99