Availability
Showing In Stock Items. Show All 20 Items.
Trick Flow® main stud girdles will strengthen Ford's factory 2-bolt main cap assemblies. Crafted from tool steel and finished with black oxide, these girdles come with main cap bolts and a provision for an oil pump pickup tube hold-down. Tie your Ford caps together for better performance with main cap girdles from Trick Flow®.
( 13 )
$258.99
Howards Cams extreme billet main caps are precision CNC-machined from superior-quality low-carbon 1020 billet material. They come available as stock replacements (straight bolt) or with splayed outer bolt holes. The splayed caps feature 10 degree angled outer holes to positively reinforce and tie the block together. Front, rear and center caps are all available. Use all the Howards Cams caps together for the ultimate in bottom-end stress and flex management. Howards Cams main caps feature side notches for easy removal and are proudly 100 percent manufactured in the USA. Line boring is required after installation.
( 14 )
$271.99
—
$285.99
Milodon aftermarket main bearing caps not only strengthen factory 2-bolt blocks, but they will also add a measurable degree of strength to 4-bolt blocks. They are made from precision-machined, high-strength steel, which has the proper balance of strength and flexibility to allow for the transfer of increased shock loads to the crank and bearings. The secret is in the side bolts. They are angled so that they pull from the side walls of the block and not from the flimsy main web area. They'll also load the cap against the register step, which will prevent dreaded "cap walk." They can be installed by anyone with a hand drill and a tap and they come with the necessary bolts, washers, and drill bushing to complete the installation. Milodon main cap kits are available in your choice of angled or straight bolts.
( 20 )
$349.95
—
$459.95
ARP main stud kits help eliminate main cap walk/fretting and protect the threads in your engine block. They include studs made from 8740 chromoly steel and heat-treated in-house to 190,000 psi tensile-strength rating. The precision J-form threads are rolled after heat-treat for much stronger threads than the competition. Kits come complete with hardened parallel-ground washers and high-quality nuts. Add confidence in the strength of your engine build with the ARP main stud kit designed for your application.
( 389 )
$253.99
—
$376.99
On Sale
Summit Racing™ Mockup Replica Blocks are light-weight and ship disassembled for ease of shipping and storage. The individual panels are easily assembled with tabs and slots for superior rigidity and accuracy compared to bolt-together types. Steel resists the heat from welding, so custom motor-mounts can be fabricated right on the block.
( 15 )
$288.99
—
$299.99
Gator Fasteners main stud kits are designed for stock to performance built engines. When building a high horsepower Cummins engine, the factory main bolts can only handle so much power. Factory bolts can stretch and unfortunately cause what's called main cap walk or loss of torque. Both these conditions can contribute to major engine issues. These heavy-duty main studs eliminate these issues and add strength to the bottom end of your engine. When it comes to reliable engine assembly, don't get caught with sub-par parts. Gator studs are what you need! Each stud has rolled threads and is constructed from 8740 steel with an added proprietary element for the ultimate in durability and high-tensile strength. Order the Gator stud kit designed for your application.
( 1 )
$259.99
—
$414.99
On Sale
Holley LS valley covers are the latest accessories offered for the GM LS engine platform. These covers install between the two banks of cylinder heads, depending on your usage of knock sensors, displacement on demand, and active fuel management. They're available in a cast aluminum finned design to match Holley's popular valve covers, as well as a billet aluminum trussed version for a race-inspired look. The valley pan covers are offered in a variety of finishes.
( 2 )
$299.95
$269.95
—
$286.95
PRW billet steel main caps raise the bar in the high performance industry. The main caps are precision-machined from high strength steel, which offers both the proper balance of strength and flexibility to allow transfer of increased shock loads to the crank and bearings. These main caps stabilize the entire crankshaft rotating assembly in your high-performance engine by eliminating annoying cap walk, and reducing main bearing bore distortion. With a combination of top-quality performance components and reasonable pricing, we know that when you receive your new PRW billet steel main caps, you will have no trouble seeing what the excitement is all about!
( 3 )
$288.43
—
$341.77
PRW main cap stud kits help eliminate main cap walk and also protect the threads in your engine block. The main cap studs work with the main caps to help strengthen the foundation for your next high horsepower build. These main cap fasteners come complete with hardened parallel-ground washers and quality hex-style nuts. Add confidence in the strength of your engine build when you use these PRW main cap stud kits.
( 6 )
$265.34
—
$384.75
Making the weak stronger--fit your Ford 2-bolt main caps with Trick Flow® main stud race-version girdles. What makes them different from their other Ford main stud girdles? These girdles feature 1/2 in. thick tool steel construction, a black oxide finish, and studs--not bolts--for easier installation, even clamping forces, and reduced chance of main cap "walking". If you're racing, tying together your Ford factory 2-bolt main caps with main stud race girdles from Trick Flow® is a move towards strong winning performance!
( 5 )
$256.99
Moroso main cap girdles for Ford are designed to fit 289-302 c.i.d. engines using a 2-bolt main block. They are manufactured from 1/2 in. thick steel and can fit over main caps without the need for additional spacers. The girdles include all necessary mounting hardware and will fit standard high-volume oil pumps.
( 10 )
$301.49
Back in the day, Ford engine block castings held up fine against 220 hp--but you couldn't go racing! Canton Racing has designed these main cap girdles to reinforce the alignment of the main caps and counter the limited webbing and weaknesses of those stock blocks. These main cap supports are laser-cut from 1/2 in. to 5/8 in. steel and feature CNC-machined mounting holes and rod notches for stroke clearance. Canton Racing main cap girdles tie directly to the caps, eliminating the need for bushings, spacers, or machining of the main caps for installation. These main cap girdles are black oxide finished for corrosion resistance and all hardware is included to get you racing.
( 18 )
$498.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
