Availability
Chevrolet Performance LSX 454 long block crate engines are built with an all-forged, super-tough rotating assembly and feature a pair of new deep-breathing LSX 6-bolt cylinder heads. They also come dressed with great looking, all-new orange powdercoated valve covers with an engraved LSX 454 logo. With a carburetor and high-flow Chevrolet Performance intake manifold (sold separately), these engines are good for about 627 hp and 586 lbs.-ft. of torque. Due to the number of application variations, the LSX 454 crate engines do not include an oil pan, and the valve covers do not include provisions for mounting the ignition coil brackets. Other specifications include: * 4.185 in. bore * 4.125 in. stroke * Cast iron LSX Series block with cross-bolted 6-bolt main caps * Forged steel crankshaft * Forged steel connecting rods * Forged aluminum 11.0:1 compression pistons * Hydraulic roller camshaft * 0.635 in. lift intake/0.635 in. lift exhaust, 236 intake/246 exhaust duration at .050 in. lift * Aluminum LSX-LS7 cylinder heads with 70cc chambers * 1.8:1 aluminum roller rocker arms * 58-tooth reluctor wheel
( 1 )
$16,836.20
For those wanting maximum horsepower and durability that's pretty much ready to go, BluePrint Engines Pro Series Chevy 454 c.i.d. 563 hp dressed long block crate engines are right for you. In addition, every BluePrint engine is dyno-tested to make sure they hit their target horsepower and torque. Pro Series 454 dressed long blocks feature: * 563 hp, 545 ft.-lb., compression ratio 10.0:1 * BluePrint cast iron block with 4-bolt main --4.250 in. bore --1-piece rear main seal --Mechanical fuel pump provision --Passenger side dipstick --Drilled and tapped for clutch linkage * Forged crankshaft and connecting rods * Forged pistons with rings * Internal front/internal rear balanced rotating assembly * BluePrint aluminum cylinder heads --64cc chamber --2.08 in. intake/1.60 in. exhaust valves --220cc intake/67cc exhaust runners * Hydraulic roller cam --.638 intake/.622 exhaust lift --251 intake/259 exhaust duration @ .050 --114 degree lobe separation * Valve covers, oil pan, and timing cover * Harmonic balancer * MSD Pro billet distributor * 950 cfm carburetor * Aluminum intake manifold
( 1 )
$11,199.00
BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Dressed Long Block crate engines are available in three different models—two with complete front accessory drives. All models deliver 460 hp and 479 lbs.-ft of torque; and feature aluminum heads, hydraulic roller cam, forged crank, hypereutectic pistons, and a compression ratio of 9.85 to 1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block, 454 BBC Manufactured and Machined in the USA 4-Bolt Main 4.250 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Standard Deck * ROTATING ASSEMBLY: New BluePrint Forged Crankshaft 4.000 in. Stroke, 4.250 in. Bore 6.135 in. connecting rods with 150,000 psi bolts Hypereutectic pistons External * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 119cc chamber 2.30 in. intake/1.88 in. exhaust valves 316cc intake/124cc exhaust runners Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting Must verify header/exhaust clearance * CAM SPECS: Cam Type: Roller .501 Intake .510 Exhaust 216 Intake / 228 Exhaust duration @ .050 - 112 degree lobe separation * IGNITION TIMING: 10-16 degrees initial and total timing 32-36 degrees at 3,500 rpm * ALSO INCLUDES: Intake Manifold single plane, satin aluminum 750cfm Carburetor Valve covers, oil pan and timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty * NOTES: This engine is an excellent cruiser and daily driver engine. This engine makes up to 15 in. of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Features External 42.5 oz. imbalance. Recommend GM flywheel 14096987, or TCI flexplate 399973. INCLUDED ONLY WITH MODEL BP454CTCK: * Installed polished complete front accessory drive system with A/C, P/S, WP, all belts and pulleys. INCLUDED ONLY WITH MODEL BP454CTCKB: * Installed black complete front accessory drive system with A/C, P/S, WP, all belts and pulleys.
( 2 )
$9,949.00
—
$12,049.00
BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Long Block crate engines deliver 460 hp and 479 lbs.-ft. of torque. They feature aluminum heads, hydraulic roller cam, cast crank, hypereutectic pistons, and a compression ratio of 9.85 to 1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block, 454 BBC Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Stroke, Bored .060 in. over 1-Piece Rear Main Seal Mech fuel pump provision: Yes Standard Deck * ROTATING ASSEMBLY: New BluePrint CastCrankshaft 4.000 in. Stroke, 4.250 in. Bore OEM type 6.135 in. connecting rods with 150,000 psi bolts Hypereutectic pistons External * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 119cc chamber 2.30 in. intake/1.88 in. exhaust valves 316cc intake/124cc exhaust runners Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting Must verify header/exhaust clearance * CAM SPECS: Cam Type: Roller .501 Intake .510 Exhaust 216 Intake / 228 Exhaust duration @ .050 - 112 degree lobe separation * IGNITION TIMING: 10-16 degrees and total timing 32-36 degrees at 3,500 rpm * ALSO INCLUDES: Valve covers, oil pan and timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty
( 1 )
$9,099.00
For those wanting maximum horsepower and durability, BluePrint Engines Pro Series Chevy 454 c.i.d. 563 hp base long block crate engines are right for you. In addition, every BluePrint engine is dyno-tested to make sure they hit their target horsepower and torque. Pro Series 454 base long blocks feature: * 563 hp, 545 ft.-lb., compression ratio 10.0:1 * BluePrint cast iron block with 4-bolt main --4.250 in. bore --1-piece rear main seal --Mechanical fuel pump provision --Passenger side dipstick --Drilled and tapped for clutch linkage * Forged crankshaft and connecting rods * Forged pistons with rings * Internal front/internal rear balanced rotating assembly * BluePrint aluminum cylinder heads --64cc chamber --2.08 in. intake/1.60 in. exhaust valves --220cc intake/67cc exhaust runners * Hydraulic roller cam --.638 intake/.622 exhaust lift --251 intake/259 exhaust duration @ .050 --114 degree lobe separation * Valve covers, oil pan, and timing cover * Harmonic balancer
( 3 )
$10,049.00
BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Dressed Long Block crate engines with fuel injection are available in three models—two with complete front accessory drive systems. All engines deliver 460 hp and 479 lbs.-ft. of torque. They feature aluminum heads, hydraulic roller cam, forged crank, hypereutectic pistons, and a compression ratio of 9.85 to 1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block, 454 BBC Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Stroke, Bored .060 in. over 1-Piece Rear Main Seal Mech fuel pump provision: Yes Standard Deck * ROTATING ASSEMBLY: New BluePrint Forged Crankshaft 4.000 in. Stroke, 4.250 in. Bore OEM type 6.135 in. connecting rods with 150,000 psi bolts Hypereutectic pistons External * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 119cc chamber 2.30 in. intake/1.88 in. exhaust valves 316cc intake/124cc exhaust runners Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting Must verify header/exhaust clearance * CAM SPECS: Cam Type: Roller .501 Intake .510 Exhaust 216 Intake / 228 Exhaust duration @ .050 - 112 degree lobe separation * IGNITION TIMING: 10-16 degrees initial and total timing 32-36 degrees at 3,500 rpm * ALSO INCLUDES: Intake Manifold single plane, satin aluminum Holley Sniper 2 EFI System Pro Billet Distributor Harmonic balancer Valve covers, oil pan and timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty * NOTES: This engine is an excellent cruiser and daily driver engine. This engine makes up to 15 in. of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Features External 42.5 oz. imbalance. Recommend GM flywheel 14096987, or TCI flexplate 399973. -- INCLUDED ONLY ON MODEL BP454CTFKB: * Installed black complete front accessory drive system with A/C, P/S, WP, all belts and pulleys. -- INCLUDED ONLY ON MODEL BP454CTFK: * Installed polished complete front accessory drive system with A/C, P/S, WP, all belts and pulleys.
Not Yet Reviewed
$10,999.00
—
$13,049.00
BluePrint Standard Edition Builder Series combos pair engine and transmission, eliminating guesswork, making it easier to gain the performance you desire. These combos match a carbureted GM small block-compatible 454 c.i.d. engine with a 700R4 automatic transmission enabling the production of 563 hp and 545 lb.-ft. of torque with a compression ratio of 10.5:1. BluePrint high-strength cast iron engine block: * 4.250 in. bore * 4-bolt main * One-piece rear main seal * Drilled and tapped for clutch linkage * Mechanical fuel pump provision * Passenger side dipstick Rotating assembly: * BluePrint forged crankshaft * Stroke: 4.000 in. * Forged 6.00 in. connecting rods * Forged pistons * Internally balanced front and rear BluePrint aluminum cylinder heads: * 64cc chamber * 2.08 in. intake/1.60 in. exhaust valves * 220cc intake/67cc exhaust runners * .500 raised port vs. OEM Hydraulic roller camshaft: * .638 in. intake/.622 in. exhaust valve lift * 251 intake/259 exhaust duration at .050 in. of lift * 114 degrees lobe separation angle (LSA) Ignition timing: * Initial timing 10 to 16 degrees, total timing 32 to 34 degrees 700R4 automatic transmission package: * 2,200 to 2,400 stall torque converter * Flexplate * Starter Also included: * Holley 950cfm double pumper carburetor * Aluminum single plane intake manifold * Pro Series Ready Run distributor * Electric fuel pump * Thermostat and thermostat housing * Valve covers * Spark plugs and wires * Timing cover * Oil pan * Polished front accessory drive: -- Reverse rotation short water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut-style air conditioning compressor
Not Yet Reviewed
$19,299.00
BluePrint Standard Edition Builder Series combos pair engine and transmission, eliminating guesswork, making it easier to gain the performance you desire. These combos match a carbureted GM small block-compatible 454 c.i.d. engine with a TKX manual transmission enabling the production of 563 hp and 545 lb.-ft. of torque with a compression ratio of 10.5:1. BluePrint high-strength cast iron engine block: * 4.250 in. bore * 4-bolt main * One-piece rear main seal * Drilled and tapped for clutch linkage * Mechanical fuel pump provision * Passenger side dipstick Rotating assembly: * BluePrint forged crankshaft * Stroke: 4.000 in. * Forged 6.00 in. connecting rods * Forged pistons * Internally balanced front and rear BluePrint aluminum cylinder heads: * 64cc chamber * 2.08 in. intake/1.60 in. exhaust valves * 220cc intake/67cc exhaust runners * .500 raised port vs. OEM Hydraulic roller camshaft: * .638 in. intake/.622 in. exhaust valve lift * 251 intake/259 exhaust duration at .050 in. of lift * 114 degrees lobe separation angle (LSA) Ignition timing: * Initial timing 10 to 16 degrees, total timing 32 to 34 degrees TKX transmission package: * Mcleod Super Street Pro single disc clutch * Hydraulic throwout bearing * Bellhousing * Billet flywheel * Starter -- First gear ratio: 2.87:1 -- Second gear ratio: 1.89:1 -- Third gear ratio: 1.28:1 -- Fourth gear ratio: 1.00:1 -- Fifth gear ratio: 0.81:1 Also included: * Holley 950cfm double pumper carburetor * Aluminum single plane intake manifold * Pro Series Ready Run distributor * Electric fuel pump * Thermostat and thermostat housing * Valve covers * Spark plugs and wires * Timing cover * Oil pan * Polished front accessory drive: -- Reverse rotation short water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut-style air conditioning compressor
Not Yet Reviewed
$19,599.00
BluePrint Standard Edition Builder Series combos pair engine and transmission, eliminating guesswork, making it easier to gain the performance you desire. These combos match a fuel injected GM small block-compatible 454 c.i.d. engine with a TKX manual transmission enabling the production of 563 hp and 545 lb.-ft. of torque with a compression ratio of 10.5:1. BluePrint high-strength cast iron engine block: * 4.250 in. bore * 4-bolt main * One-piece rear main seal * Drilled and tapped for clutch linkage * Mechanical fuel pump provision * Passenger side dipstick Rotating assembly: * BluePrint forged crankshaft * Stroke: 4.000 in. * Forged 6.00 in. connecting rods * Forged pistons * Internally balanced front and rear BluePrint aluminum cylinder heads: * 64cc chamber * 2.08 in. intake/1.60 in. exhaust valves * 220cc intake/67cc exhaust runners * .500 raised port vs. OEM Hydraulic roller camshaft: * .638 in. intake/.622 in. exhaust valve lift * 251 intake/259 exhaust duration at .050 in. of lift * 114 degrees lobe separation angle (LSA) Ignition timing: * Initial timing 10 to 16 degrees, total timing 32 to 34 degrees TKX transmission package: * Mcleod Super Street Pro single disc clutch * Hydraulic throwout bearing * Bellhousing * Billet flywheel * Starter -- First gear ratio: 2.87:1 -- Second gear ratio: 1.89:1 -- Third gear ratio: 1.28:1 -- Fourth gear ratio: 1.00:1 -- Fifth gear ratio: 0.81:1 Also included: * Holley Sniper 2 EFI system * Aluminum single plane intake manifold * Pro Series Ready Run distributor * EFI fuel pump kit * Thermostat and thermostat housing * Valve covers * Spark plugs and wires * Timing cover * Oil pan * Polished front accessory drive: -- Reverse rotation short water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut-style air conditioning compressor
Not Yet Reviewed
$21,699.00
BluePrint Standard Edition Builder Series combos pair engine and transmission, eliminating guesswork, making it easier to gain the performance you desire. These combos match a fuel injected GM small block-compatible 454 c.i.d. engine with a 700R4 automatic transmission enabling the production of 563 hp and 545 lb.-ft. of torque with a compression ratio of 10.5:1. BluePrint high-strength cast iron engine block: * 4.250 in. bore * 4-bolt main * One-piece rear main seal * Drilled and tapped for clutch linkage * Mechanical fuel pump provision * Passenger side dipstick Rotating assembly: * BluePrint forged crankshaft * Stroke: 4.000 in. * Forged 6.00 in. connecting rods * Forged pistons * Internally balanced front and rear BluePrint aluminum cylinder heads: * 64cc chamber * 2.08 in. intake/1.60 in. exhaust valves * 220cc intake/67cc exhaust runners * .500 raised port vs. OEM Hydraulic roller camshaft: * .638 in. intake/.622 in. exhaust valve lift * 251 intake/259 exhaust duration at .050 in. of lift * 114 degrees lobe separation angle (LSA) Ignition timing: * Initial timing 10 to 16 degrees, total timing 32 to 34 degrees 700R4 automatic transmission package: * 2,200 to 2,400 stall torque converter * Flexplate * Starter Also included: * Holley Sniper 2 EFI system * Aluminum single plane intake manifold * Pro Series Ready Run distributor * EFI fuel pump kit * Thermostat and thermostat housing * Valve covers * Spark plugs and wires * Timing cover * Oil pan * Polished front accessory drive: -- Reverse rotation short water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut-style air conditioning compressor
Not Yet Reviewed
$21,399.00
Chevrolet Performance 7.4L 454 c.i.d. long block crate engines feature genuine Chevrolet internal parts. They are tested to ensure great performance under even the most demanding conditions. Assembly features include: * Cast iron block * Cast, externally balanced crankshaft * Cast steel connecting rods * Shot-peened and magnafluxed * Pistons * Hydraulic camshaft and lifters * Cast iron cylinder heads with oval ports * Timing cover
Not Yet Reviewed
$10,064.99
Give your ride a new breath of life with BluePrint Engines GM 496 c.i.d. 600 hp stroker dressed carbureted long block crate engines with aluminum heads. These engines crank out an incredible 600 hp and 568 ft.-lbs. of tire-shredding torque. Each engine is hand-built and balanced to provide you with a powerful mill that is sure to kick some fresh life into your project car or hot rod. Block: * Cast iron 454 big block * Cylinders honed to within .0002 straightness and roundness * Cylinders are sonic-tested for thickness * 4.250 in. stroke, bored .060 in. over * Standard deck Rotating assembly: * Forged steel crankshaft * OEM-type connecting rods with 150,000 psi rod bolts * Hypereutectic pistons, 10.1 to 1 Compression ratio * Hydraulic roller camshaft Additional features: * Aluminum cylinder heads * 850 cfm carburetor * Aluminum intake manifold * Valve covers, oil pan * 30-month/50,000-mile warranty * Dyno test results shipped with engine
( 3 )
$11,349.00
—
$13,449.00
BluePrint Engines GM BB compatible 496 c.i.d. Stroker long block base crate engines with forged components are built to accept power adders like turbochargers, superchargers, NOS, etc. They're built to deliver 561 hp and 512 lbs.-ft. of torque. The engines also include valve covers, an oil pan and timing cover. Compression ratio: 8.8:1 Engine specifications: --- BLOCK: * NEW BluePrint cast iron block * 4-bolt main * 4.500 in. bore * One-piece rear main seal * Mechanical fuel pump provision: Yes * Standard deck --- ROTATING ASSEMBLY: * New BluePrint forged crankshaft * 4.250 in. stroke * Forged H-beam 6.135 in. connecting rods * Forged pistons * Internal ---CYLINDER HEADS: * BluePrint aluminum cylinder heads * 119cc chamber * 2.30 in. intake / 1.88 in. exhaust valves * 316cc intake / 124cc exhaust runners * Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting * Must verify header/exhaust clearance ---CAM SPECS: * Cam type: Hydraulic roller * .540 Intake .560 exhaust * 242 intake / 248 exhaust duration * @ .050 - 114-degree lobe separation --- IGNITION TIMING: * 10-16 degrees and total timing 32-34 degrees ---NOTES: * Replaces BP49610CT * Built with dual keyway crankshaft for harmonic balancer * SFI harmonic balancer included on engine * Not for EGR * Must verify header/exhaust clearance
Not Yet Reviewed
$11,299.00
BluePrint Engines GM 496 c.i.d. 600 hp stroker dressed long block crate engines with aluminum heads provide reliable high-end performance. They are manufactured under strict tolerances and provide outstanding, consistent results. BluePrint Engines GM 496 c.i.d. stroker dressed crate engines are dyno-tested and the results are shipped with engine . Block: * Hand-picked seasoned Chevy 454 big block * Square and parallel decked * Align-honed main bearing bore * Cylinders honed to within .0002 straightness and roundness * Cylinders are sonic-tested for thickness Rotating assembly: * Forged steel crankshaft * OEM-type connecting rods with 150,000 psi rod bolts * Hypereutectic pistons * Hydraulic roller camshaft Additional features: * Aluminum cylinder heads * Valve covers, oil pan, and timing cover * Brass freeze plugs * 30-month/50,000-mile warranty
( 1 )
$9,899.00
Here, at last, is the king of all big block crate engines from Chevrolet Performance. These 502 cu. in. engines are available unassembled or fully assembled. Each version makes extensive use of aluminum to keep weight down—including aluminum heads, intake, water pump, and valve covers. Additionally, ZZ502 c.i.d. deluxe long block crate engines are full of heavy-duty parts, such as: forged aluminum pistons, forged shot-peened steel connecting rods with 7/16 in. bolts, forged steel crankshaft, 14 in. automatic transmission flexplate, 4-bolt main blocks, stainless steel valves, 6 qt. oil pan, and windage trays. The complete Chevrolet Performance engine kits come with Gen 6 four-bolt main blocks with one-piece rear main seals. Hydraulic roller camshaft specs are: .527 in. intake lift, .544 in. exhaust lift; the duration at .050 in. for intake is 224, and 234 for exhaust with a 112-degree lobe centerline. Other features include a single roller timing chain, aluminum large oval port, and 110cc combustion chambered heads. Intake runner volume is 290cc; stainless steel valves are installed, with 2.25 in. intake side and 1.88 in. on the exhaust side. Valve springs are rated at 140 lbs. closed and 368 lbs. open, good for up to .680 in. lift. These heads have exhaust crossovers. Aluminum high-rise dual-plane square bore bolt pattern intake manifolds and an 870 cfm carburetor are also included.
( 3 )
$14,846.00
Blueprint Pro Series is for those wanting maximum horsepower and durability. BluePrint Engines Pro Series Chevy 502 c.i.d. 627 hp dressed long block crate engines offer any custom builder, hot rodder, or kit car builder an engine that has been fully dyno tested, passed vigorous inspections, and is ready to power up your project. Blueprint's Pro Series 502 big block GM-style engines are dressed with carburetor, aluminum heads, forged pistons, forged crankshaft, and a hydraulic roller cam. Additional features: * Standard deck with 4-bolt main * Forged H-beam connecting rods * Cylinder head specs: -- 119cc chamber -- 2.30 in. intake / 1.88 in. exhaust valves -- 316cc intake / 124cc exhaust runners * Camshaft specs: -- .647 intake / .647 exhaust -- 248 intake / 254 exhaust duration -- at .050 - 112 degree lobe separation * Dyno test results shipped with engine
( 2 )
$11,949.00
—
$13,949.00
Give your ride a new breath of life with BluePrint Engines GM 496 c.i.d. 600 hp stroker dressed fuel injected long block crate engines with aluminum heads. These engines crank out an incredible 600 hp and 568 ft.-lbs. of tire-shredding torque. Each engine is hand-built and balanced to provide you with a powerful mill that is sure to kick some fresh life into your project car or hot rod. Block: * Hand-picked seasoned Chevy 454 big block * Square and parallel decked * Align-honed main bearing bore * Cylinders honed to within .0002 straightness and roundness * Cylinders are sonic-tested for thickness Rotating assembly: * Forged steel crankshaft * OEM-type connecting rods with 150,000 psi rod bolts * Hypereutectic pistons * Hydraulic roller camshaft Additional features: * Aluminum cylinder heads * EFI system * Distributor * Valve covers, oil pan, and timing cover * 30-month/50,000-mile warranty
Not Yet Reviewed
$12,399.00
—
$14,499.00
BluePrint Builder Series 632/815HP Blackout Reaper crate engine and 4L80E transmission combos take away the hassle of properly pairing a carbureted Chevy Gen VI big block 454 performance engine and 4-speed automatic transmission for your build. These powerful assemblies deliver 815 horsepower and 775 lbs.-ft. of torque with BluePrint aluminum cylinder heads and hydraulic roller camshaft to go with forged pistons, a forged crankshaft, and forged connecting rods. The front accessory drive includes the alternator, power steering pump, A/C compressor, and water pump for the cast iron block which features a tall deck. When you are looking for a new powertrain, go with the authority in crate engines and order your very own BluePrint Builder Series 632/815HP Blackout Reaper crate engine and 4L80E transmission combo. More product features and details include: * Compression ratio of 11.0:1 * Camshaft offers 0.698 in. intake/exhaust lift with 272 intake and 282 exhaust duration at 0.050 in. lift and a 110 LSA * Stroke is 4.750 in. with 6.635 in. long connecting rods * Block is a one-piece rear main seal, 4-bolt main setup with a 4.600 in. bore and mechanical fuel pump provision * Rotating assembly is internally balanced and features H-beam connecting rods * BluePrint PS8012 cylinder heads provide a 119cc combustion chamber, 2.300 in. intake and 1.880 in. exhaust valves, plus 358cc intake/125cc exhaust runners and a 0.300 in. raised exhaust port (compared to OEM casting) * This combo also includes the 1,250 cfm carburetor, electric fuel pump, single plane satin finished aluminum intake manifold, spark plugs/wires, valve covers, Pro Billet distributor, harmonic balancer, thermostat with housing, and an oil pan * Spark plug model BPP7938 NGK 7938 BKR5E (0.750 in. reach, 14mm thread, 5/8 in. hex, plug; gapped to 0.035 in.) * Harmonic balancer is non-weighted Transmission features and details include: * Electronic transmission controller * Lockup capable * Torque converter with 3,800-4,200 rpm advertised stall rating * Flexplate (non-weighted) and starter * Gear ratios are 2.482:1 (first), 1.482:1 (second), 1.000:1 (third), 0.750:1 (fourth), and 2.077:1 (reverse) * Builder's responsibility to verify clearances for exhaust routing, shift linkage, steering components, etc. * Low profile front accessory design may require fabrication for power steering hoses, alternator wiring, and any additional fittings Other notes: * Recommended fuel is 91 octane and recommended break-in oil is BPP710 * Initial timing is 10-16 degrees * Total timing is 32-34 degrees by 2,500 rpm * Firing order is 1-8-4-3-6-5-7-2 * Not for EGR * Recommended headers include those made by Ultimate Headers, Hedman Husler race headers, and Sanderson headers
Not Yet Reviewed
$29,999.00
Smash the competition or terrorize the street with ATK High Performance GM 540 660 hp Stage 3 long block crate engines. They are built around a rock-solid bottom-end and a free-breathing top-end to create a beast that is capable of 660 hp and 690 ft.-lbs. of tire-shredding power. ATK hand-assembles each of these mills out of top-of-the-line components to make them strong enough for the track, but reliable enough for street use, so you get the best of both worlds. ATK GM 540 660 hp Stage 3 crate engines include: * Dart Big M block * High performance aluminum cylinder heads * Intake manifold * Carburetion * 4340 forged steel crankshaft and H-beam connecting rods * Forged pistons * Hydraulic roller camshaft * Cam lift- .640 int./.640 exh. * Cam duration @ 0.50- 243 int./249 exh. * 10.0:1 compression * Distributor, plug wires, plugs * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube * Water pump * Front damper and flexplate
Not Yet Reviewed
$14,998.99
BluePrint Builder Series 632/815HP Standard Edition EFI crate engine and 4L80E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy big block-compatible 632 (c.i.d.) engine that produces 815 horsepower, this standard edition builder Pro Series includes a polished pulley kit and 4L80E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 775 lbs.-ft. of torque. When you need or want a new powertrain for your GM ride, go with the authority in crate engines and their BluePrint Builder Series 632/815HP Standard Edition EFI crate engine and 4L80E transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Bore is 4.600 in. * Main caps are 4-bolt * One-piece rear main seal * Mechanical fuel pump provision * Tall deck (approximately 0.400 in. taller and wider than OEM block) Rotating Assembly: * New BluePrint forged crankshaft * Stroke – 4.750 in. * Forged H-beam 6.635 in. connecting rods * Forged pistons * Internal balance * Non-weighted harmonic balancer Aluminum Cylinder Heads: * BluePrint PS8012 performance models (0.300 in. raised exhaust port vs. OEM) * Chamber – 119cc * Valves are 2.300 in. intake and 1.880 in. exhaust * Exhaust runners are 358cc intake and 125cc exhaust * Builder must verify clearance of exhaust, shift linkage, steering components, etc. before ordering Camshaft: * Hydraulic roller * Intake valve lift – 0.698 in. * Exhaust valve lift – 0.698 in. * Intake duration at 0.050 in. of lift – 272 * Exhaust duration at 0.050 in. of lift - 282 * Lobe separation angle (LSA) – 110 degrees Ignition Timing * Initial is 10-16 degrees (16-20 degrees for Dominator-style carburetors) * Total is 32-34 degrees (by 2,500 rpm for Dominator-style carburetors) * Firing order is 1-8-4-3-6-5-7-2 Automatic Transmission Package: * Complete 4L80E package with electronic controller (lockup capability) * Torque converter with 3,800–4,200 rpm stall * Non-weighted flexplate * Starter * Gear ratios are 2.482:1 (first), 1.482:1 (second), 1.000:1 (third), 0.750:1 (fourth), 2.077:1 (reverse) Other Components: * Single plane aluminum intake manifold with satin finish * Complete EFI system with Aeromotive A1000 fuel pump * Valve covers, oil pan, and timing cover * Pro Billet distributor * Front accessory drive with polished finish (includes alternator, A/C, power steering, water pump, pulleys, and belts) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Recommended fuel is 91 octane. Recommended oil is BPP710. Not designed for EGR-compatibility.
Not Yet Reviewed
$30,099.00
More power for your boat! BluePrint Engines Marine Pro Series GM 540 c.i.d. 670 hp dressed long block crate engines are manufactured under strict tolerances and provide outstanding, consistent results. BluePrint Pro Series Marine crate engines are also dyno-tested and include the dyno sheets. Marine Pro Series GM 540 c.i.d. long blocks feature: * BluePrint cast iron block - 4-bolt mains - One-piece rear main seal - Mechanical fuel pump provision - Standard deck * Forged crankshaft - 4.250 in. stroke * Forged H-beam 6.385 in. connecting rods * Forged pistons * Internal balanced rotating system * Aluminum cylinder heads - 119cc chamber - 2.30 in. intake/1.88 in. exhaust valves - 316cc intake/124cc exhaust runners * Hydraulic roller camshaft - Lift = 0.647 in./0.647 in. - Duration at 0.050 in. = 248/254 degrees - Lobe separation = 112 degrees * Carburetor * Aluminum intake manifold * Billet distributor * Valve covers, oil pan, and timing cover * Spark plug and wires * Harmonic balancer
( 1 )
$15,199.00
ATK High Performance GM 489 Stroker 565 hp Stage 3 long block crate engines are new versions based off the later model Gen V and require an electric fuel pump. ATK Stage 3 or complete dressed engines are designed for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 489 Stroker 565 hp complete dressed engines consist of: * Seasoned OE block with 4-bolt mains * Nodular iron crankshaft * 4340 forged I-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * Performance aluminum cylinder heads * Billet aluminum rocker arms * Valve covers * Timing set and cover * Oil pan, oil pump and pick-up tube * Performance intake manifold * Distributor * Long water pump * Front damper * Flexplate * 780cfm carburetor * Spark plugs and wires
Not Yet Reviewed
$10,298.99
ATK High Performance GM 489 Stroker 565 hp Stage 1 long block crate engines are new versions based off the later model Gen V and require an electric fuel pump. ATK Stage 1 or base engines are designed for those that may have their own component parts already, and who also are interested in completing out the build themselves. Typically ATK GM 489 Stroker 565 hp base engines consist of: * Seasoned OE block with 4-bolt mains * Nodular iron crankshaft * 4340 forged I-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * Performance aluminum cylinder heads * Billet aluminum rocker arms * Valve covers * Timing set and cover * Oil pan, oil pump and pick-up tube
Not Yet Reviewed
$8,998.99
ATK High Performance GM 496 Stroker 600 hp Stage 1 long block crate engines are designed for street/strip use, so expect big power with a rough idle. They require an electric fuel pump. ATK Stage 1 or base engines are designed for those that may have their own component parts already, and who also are interested in completing out the build themselves. Typically ATK GM 496 Stroker 600 hp base engines consist of: * Seasoned OE block with 4-bolt mains * 4340 forged crankshaft * 4340 forged H-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * Aluminum cylinder heads * Billet aluminum full roller rocker arms * Timing set and cover * Oil pan, oil pump and pick-up tube * Valve covers
Not Yet Reviewed
$9,398.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
