Crate Engines, Short Blocks, Engine & Transmission Combos

Individual Parts

Part Groups

Results 1 - 24 of 46

Clearance

ATK Marine Rebuilt Long Block Engines

ATK Marine Engines offers premium-quality rebuilt long block engines specifically for boating applications. These engines are designed to deliver maximum performance and long-term durability for your boat. Order the model recommended for your marine application. ATK Marine rebuilt engines include: * Special marine pistons and rings * Special marine camshaft * Marine gaskets * New intake and exhaust valves * New main, rod, and cam bearings * New valve lifters, rocker nuts, and swivels * Heavy-duty double roller timing chains * Cam sprocket * Crank gear * Freeze plugs

4.41 out of 5 stars ( 46 )

$2,997.99

—

$3,526.99

BluePrint Engines Pro Series Chevy LS 376 C.I.D. 530 HP EFI Base Dressed Long Block Crate Engines

BluePrint Engines provides a Dyno Promise with results and bragging rights. They make sure they hit their target horsepower and proper torque with every crate engine, utilizing an advanced computerized balancer to get rotating assemblies within 2 grams, ensuring silky smooth power over the entire rpm range. According to BluePrint, that's precisely why their engines sound and run better than the competitors. Accompanying your BluePrint Engines Pro Series Chevy LS 376 c.i.d. 530 hp EFI base dressed long block crate engine will be a comprehensive, dyno-generated printout showing its critical specs. No more guessing what the real-world peak horsepower and torque ratings are. Any doubters in the crowd? Simply flash them your dyno results! These long block engines are available with or without complete engine controller with ECU, harness, throttle pedal, and sensors. Select the one you want. BluePrint Engines Pro Series Chevy LS EFI base dressed engine: * Horsepower and torque: 530hp/495 lb.-ft. * Compression ratio: 10.7:1 * BluePrint Engines LS3 aluminum cylinder heads -- 69cc chamber -- 2.165 in. intake/1.590 in. exhaust valves -- 259cc intake/102cc exhaust runners * Hydraulic roller camshaft: -- .612 intake/.585 exhaust lift -- 225 intake/238 exhaust duration at .050 in. -- 113-degree lobe separation angle -- 3-bolt cam * Nodular iron crankshaft -- 3.622 in. stroke -- 6.125 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * BluePrint Engines high-strength cast iron 6.2L block -- Increased deck thickness and strength webbing -- Extended cylinder skirt -- Priority main oiling -- 4.0662 in. bore -- 6-bolt main -- 1-piece rear main seal -- Improved water jacket design -- Utilizes OEM LS3 front and rear covers * LS swap oil pan * Harmonic balancer (Short Corvette style) * DBW throttle body * Available with a GM plastic or fabricated intake manifold * Fuel injectors and rail * Coil packs * Spark plugs and wires * Water pump

4.2 out of 5 stars ( 5 )

$10,199.00

—

$14,199.00

BluePrint Builder Series LS376/530HP Standard Edition EFI Crate Engine and 4L65/70E Trans Combos

BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a black pulley kit and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plugs and wires * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * Champion 3015 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.

Not Yet Reviewed

$20,399.00

—

$23,499.00

BluePrint Pro Series Chevy LS 376 C.I.D. 700 HP EFI Supercharged Deluxe Long Block Crate Engines

BluePrint Pro Series Chevy LS 376 c.i.d. EFI supercharged deluxe long block crate engines deliver 700 hp and 640 lbs.-ft. of torque. They include LS3 aluminum cylinder heads, forged pistons, hydraulic roller camshaft, nodular iron crankshaft, a Holley Terminator X Max Gen IV complete ECU and harness for engine management, a polished or black finish accessory drive system, and more. Additional features and specs: -- Block: * BluePrint Engines high-strength cast iron 6.2L block * Increased deck thickness and strength webbing * Extended cylinder skirt * Priority main oiling * 4.070 in. bore * 6-bolt main * One-piece rear main seal * Improved water jacket design * Compression ratio: 9.5:1 -- Rotating Assembly: * Forged crankshaft * 3.622 in. stroke * 6.125 in. connecting rods with 150,000 psi bolts * Forged pistons * Internally balanced front and rear -- Cylinder heads: * BluePrint aluminum cylinder heads * 70cc chamber * 2.165 in. intake / 1.600 in. exhaust valves * 259cc Intake / 102cc exhaust runners -- Cam specs: * Cam type: Hydraulic Roller Cam * .612 intake / .585 exhaust lift * 225 intake / 238 exhaust duration * @.050-113 degree lobe separation -- Also includes: * Holley Terminator X Max - Gen IV complete ECU/Harness EFI system * Coil packs * Valve covers * Oil pan * All sensors required for engine to run * Drive-by-wire throttle body * Throttle pedal * Timing cover * Spark plugs and wires * Harmonic balancer * Front accessory drive with power steering pump, water pump, alternator, and air compressor -- Notes: * Not for use in pollution-controlled vehicles. * BluePrint Engines recommends air intake kit BPPLS01013 to ensure correct MAF calculations and Dyno calibration are maintained with the above ECU / tuning.

Not Yet Reviewed

$23,199.00

—

$23,299.00

Summit Bucks

Chevrolet Performance L8P 6.6L 400 C.I.D Engine Assemblies

By combining the large-displacement and heavy-duty elements of the L8T 6.6L engine and a unique camshaft based off the Corvette Stingray's high-revving LT2 V-8, Chevrolet Performance engineers have created the all-new L8P 400 c.i.d. Performance crate engine. Rated at 523 hp and 543 lbs.-ft. of torque, it offers your project a unique and naturally aspirated combination of big-displacement torque and high-rpm horsepower. The L8T 6.6L foundation is the same high-strength, big-displacement engine found in the Silverado HD from 2020 to present day, featuring a forged steel crankshaft and high-strength components. Additional features such as oil-spray cooling for the pistons and a cast iron, long-skirt cylinder block with 6-bolt, cross-bolted main caps contribute to the engine's strength and durability. The new L8P builds on that with a unique, upgraded valvetrain featuring performance-oriented valves and springs, along with a unique camshaft that is based off the Corvette Stingray's LT2 engine. It has a non-active fuel management profile and more duration than the L8t's camshaft. It's the best of both engines: the largest displacement in the LT family and the power-building attributes of the Corvette camshaft. Put it to work in your project. Fast Facts: * Displacement: 400 cu. in. (6.6L) * Bore x Stroke: 4.06 in. x 3.86 in. * Crankshaft: Forged steel * Pistons: Hypereutectic aluminum * Compression ratio: 10.8:1 * Cylinder heads: Rectangular port D/I with 59.02cc chambers * Camshaft type: Billet steel hydraulic roller * Camshaft duration: 218 degree intake/231 degree exhaust at .050 in. * Fuel delivery: Direct injection with high-pressure pump * Horsepower: 523 at 5,800 rpm * Torque (lbs.-ft.): 543 at 4,800 rpm * Engine type: Gen V small block V-8 direct injection spark ignition * Block: Cast iron with 6-bolt no Dula main bearing caps * Connecting rods: Forged powder-metal * Valve lift (in.): 0.549 intake / 0.549 exhaust * Rocker arms: Investment cast roller trunnion * Rocker arm ratio: 1.8:1 * Intake manifold: Composite * Throttle body: 87mm diameter (single-bore) * Fuel delivery: High-pressure direct injection (2,175 psi / 150 bar) * Recommended fuel: Premium pump * Ignition system: Coil-on-plug * Maximum recommended RPM: 6,000 rpm * Reluctor wheel: 58X * Balanced: Internal * Note: Use with the new engine control kit, P/N 19435524, which includes a programmed controller, wire harness, pedal, oxygen sensors and mounts, MAD, fuel line pressure sensor and fuel pump power module. Flexplate P/N 12685003 must be purchased for these engines to be compatible with the 10-speed supermatic transmission. 10-speed supermatic transmission uses six bolts to attach the torque converter.

Not Yet Reviewed

$8,948.80

BluePrint Engines Pro Series Chevy LS 427 C.I.D. 625 HP EFI Drop-In Base Long Block Crate Engines

Swap out your powerplant with one of these BluePrint Engines Pro Series Chevy LS 427 c.i.d. EFI drop-in base long block crate engines. They put down an impressive 625 hp and 565 lbs.-ft. of torque! Featuring a 30-month/50,000-mile warranty, they're the perfect choice for drivable and reliable high-end performance. Additionally, BluePrint Pro Series Chevy 427 c.i.d. dressed long block crate engine assemblies are manufactured under strict tolerances and provide outstanding, consistent results. They include a 58X Gen IV reluctor wheel and sensors. Long block crate engine features include: * New GM LS engine block * 4340 forged 4.125 in. stroke crankshaft * 4340 forged 6.125 in. long connecting rods * Forged pistons * 11.0:1 compression * Hydraulic roller camshaft, .624 in. lift intake, .624 in. lift exhaust, 239 intake/255 exhaust duration @ .050 in. lift, with 114 degree lobe separation * Aluminum GM LS cylinder heads * Single roller timing chain * GM LS intake manifold * Full roller rocker arms * ECM Controlled (not included - customer must reprogram)

Not Yet Reviewed

$12,949.00

BluePrint Motorsports Pro Series Mopar 426 C.I.D. 610 HP EFI Base Long Block Crate Engines

BluePrint Engines Pro Series Mopar 426 c.i.d. EFI base long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III HEMI Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- PS426CTF ALSO INCLUDES: Fuel injection Throttle body Harmonic balancer Fabricated intake manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Compression ratio: 10.48:1 Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel delivery type: Fuel injected -- Spark plug: NGK 97408/ LZTR6AP11EG -- Spark plug gap: .043 in. -- Harmonic balancer: Non-weighted -- Flexplate / Flywheel: Non-weighted -- Stall converter: 2500+ -- Intake manifold: Fabricated aluminum Gen III HEMI -- Fuel recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2

Not Yet Reviewed

$14,299.00

—

$17,499.00

BluePrint Engines Pro Series Mopar 426 C.I.D. 872 HP EFI Deluxe Dressed Long Block Crate Engines

BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. These engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2

Not Yet Reviewed

$27,699.00

—

$27,799.00

ATK High Performance Chevy LQ4 6.0L 505 HP Long Block Crate Engines

ATK High Performance Chevy LQ4 6.0L 505 hp long block crate engines are designed to be a performance upgrade for LS-based vehicles or perfect for a 2001-07 Chevy Truck LQ4 or LS swap in a hot rod. Expect big mid- to upper-end power, with a noticeable idle. (For optimal performance, you'll need headers, chassis dyno tune, and 36 lb. injectors. Engine specifications: * Horsepower: 505 * Torque: 480 * Block: OE LQ4/6.0L Iron * Bore/Stroke: Up to 4.040 in. x 3.622 in. * Displacement (cu.in.): Up to 371 * Crankshaft: OE GM 24-tooth reluctor wheel * Rods: OE powder metal or stock GM * Pistons: Hypereutectic 10:1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: OE cathedral port aluminum 71cc/210cc 2.00/1.55 * Rocker arms: 1.7 ratio * Oil pump: Melling STD volume * Engine info: -- Oil: Conventional / Non-Synthetic 10W30 -- Oil Filter: Wix or K&N -- Timing: Set to factory specifications via PCM module -- Spark Plug Gap: .040 in. -- Firing Order: 18726543 -- Octane: 91+ -- Stall Converter: 1800+ -- Exhaust: 1 5/8 + Headers (Per application – Larger diameter will make more power) * NOTES: This engine replaces the 2001-07 Chevy 6.0L LQ4 engine. ECM MUST BE TUNED; not doing so can damage the engine. A PCV valve must be run. You must also run an air-oil separator system such as the Moroso 85487 to capture the excess crankcase vapors LS engines are known for. If you are not running a MAP sensor, the MAP timing option in the timing control box must be zeroed out all the way across. Failure to do so will allow the controller to add timing which can lead to detonation. You must also run some sort of a steam line kit that dumps to your water pump, radiator or radiator hose; ATK recommends a 4-corner setup like the Trick Flow TFS-306SB601. This allows air pockets/hot spots to escape the heads and can also be used to purge out trapped air when filling the radiator for the first time.

3.0 out of 5 stars ( 2 )

$5,198.99

Chevrolet Performance LS 376/525 LS3 Long Block Crate Engines

Chevrolet Performance has released its latest factory-engineered LS high-performance engine: the 376/525 LS3 long block. It blends the racing-derived ASA camshaft with the LS3 6.2L production engine to create the most powerful production-based crate engine in Chevrolet Performance's portfolio, delivering 525 hp at 6,200 rpm and 486 lbs.-ft. torque at 5,200 rpm. (For installation in older vehicles, the engine controller kit part number 19354332 is calibrated specifically for this new engine.) Using the LS3 production engine—the same used in Corvettes and Camaros—as the foundation for the LS 376/525 helped keep the retail price lower; while the ASA camshaft is a proven, power-building component that's been successful in the high-RPM world of Circle Track racing. The ASA camshaft is a hydraulic roller with .525-inch lift on both the intake and exhaust sides, along with 226 degrees duration on the intake side and 236 degrees on the exhaust side. Coupled with a tight, 110-degree lobe separation angle, it helps the engine deliver excellent throttle response and breath exceptionally well at high RPM. The cam also gives the LS 376/525 the most aggressive personality among Chevrolet Performance's growing lineup of production-based high-performance crate engines, which also includes the LS 376/480 and the carbureted LS 376/515. Front-end accessories must be obtained separately, along with the engine controller kit. Chevrolet Performance offers several accessory drive kits to suit a variety of applications; and some installations for older vehicles will require the oil pan changed. Engine specifications: * Power: 525 hp at 6,200 rpm, 486 lbs.-ft. of torque at 5,200 rpm * Displacement: 376 C.I.D., 6.2L * Bore x Stroke: 4.060 in. x 3.620 in. * Compression Ratio: 10.7:1 * Recommended Fuel: 92 Octane * Block: Cast Aluminum with 6-bolt cross bolted main caps * Crankshaft: Nodular Iron * Connecting Rods: Powdered Metal Steel * Pistons: Hypereutectic Aluminum * Camshaft: Steel Hydraulic Roller Tappet * Cam Lift: .525 in. Intake / .525 in. Exhaust * Cam Duration at .050 in.: 226 deg. Intake / 236 deg. Exhaust * Lobe Separation: 110 Degree * Cylinder Heads: Aluminum L92 style ports * Combustion Chamber: 68cc * Valves: 2.165 in. Intake/ 1.590 in. Exhaust * Rocker Arms: Cast Roller Trunnion, 1.7:1 Ratio * Balance: Internal * Reluctor: 58X * Maximum GM Recommended RPM: 6,600 * GM Recommended Torque Converter Stall 3000-3400 Engine Includes: -- Fully GM assembled long block -- Oil pump, pick-up and Camaro oil pan (12628771) -- Corvette harmonic balancer -- Front timing cover with cam sensor -- Oil filter -- Passenger side RH oil dipstick and tube (not included) (Note: Does not include oil dipstick tube, oil dipstick, or steam crossover tube.)

5.0 out of 5 stars ( 3 )

$8,108.60

BluePrint Engines Pro Series Mopar 426 C.I.D. 610 HP EFI Deluxe Dressed Long Block Crate Engines

BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. The engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW OEM Hellcat engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Holley Terminator engine harness Fuel injection Throttle body Harmonic balancer Fabricated intake Manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Fuel Injected -- Spark Plug: NGK 97408/ LZTR6AP11EG -- Spark Plug Gap: .043 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Fabricated Aluminum Gen III HEMI -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2

Not Yet Reviewed

$19,399.00

—

$19,499.00

Summit Bucks

Chevrolet Performance 6.0L 366 C.I.D. L76 Remanufactured Crate Engines

Whether you're looking to build a reliable engine for towing and hauling or want the foundation for a high-performance build, the Chevrolet Performance 6.0L 366 C.I.D. L76 Remanufactured Crate Engines are a great starting point and at a more affordable cost. These crate engines boast a number of features and benefits. Each engine is tested to meet or exceed GM's original equipment specifications. Additionally, every component is inspected and replaced if necessary. As a result, these remanufactured crate engines provide excellent value and dependability. Specific information (instructions): The replacement crate engines are built with two different designed oil pans. Differences are the first design oil pan has threaded hole for oil level sensor; the second design oil pan is without hole for the oil level sensor. Transfer oil pan from original engine or procure new, if required. For C/K Trucks, G-van applications, the oil pan on the replacement engine has been upgraded with a new oil deflector (shield) installed over a new oil pressure relief valve. If transferring the original oil pan to the replacement engine transfer these new components to that oil pan. --Transfer crankshaft balancer, crankshaft sensor, camshaft sensor, sensor wiring harness and bracket from original engine or procure new. --Install new crankshaft balancer bolt that is included with engine assembly. --Refer to instruction sheet for general/detailed information and instructions on components that are required to be transferred from the original engine assembly or procured new. --Transfer crankshaft balancer, crankshaft sensor, camshaft sensor, sensor wiring harness and bracket from original engine or procure new. --Install new crankshaft balancer bolt that is included with engine assembly. The replacement engine is built with a first or second design oil pan. The first design pan has a threaded hole for applications equipped with an oil level sensor. The second design oil pan is for applications that do not use an oil level sensor; no threaded hole. Transfer oil pan from original engine or procure new, if required. The replacement engine is built with first or second design valve rocker arm covers. The first design valve covers do not use quick connect PCV tubes. The second design valve covers use quick connect PCV tubes. Transfer valve covers from original engine or procure new, if required. The replacement engine may use rivet-type plugs in place of the coolant air bleed covers located at the top rear of each cylinder head. In applications that contain the rivet-type plug, it is not necessary to install the coolant bleed covers. For LS4 Applications, transfer the A/T flywheel/flexplate locator that is pressed into the rear hub of the crankshaft from the original engine or procure new. For C/K Trucks, G-van applications, the oil pan on the replacement engine has been upgraded with a new oil deflector (shield) installed over a new oil pressure relief valve. If transferring the original oil pan to the replacement engine transfer these new components to that oil pan. For 2007 Cadillac Escalade and GMC Yukon Denali applications w/6.2L L92: Engines prior to April 2006 were built with AFM (Active Fuel Management) hardware components, but the AFM system is not enabled on the 2007 L92 engine. The replacement engine does not contain the AFM hardware; it includes a valley cover that is used in place of the VLOM (valve lifter oil manifold). Do not transfer AFM hardware to replacement engine. When performing an engine replacement on a L92 engine that was originally equipped with AFM hardware, the VLOM electrical connector must be removed from the wiring harness. Included Engine Content: * Engine Block * Pistons * Crankshaft * Connecting Rods * Cylinder Head * Camshaft * Front Cover * Housing, Cr/Shf Rear Oil Seal * Valve Cover/Cam Cover * Valve lifter Oil Manifold (VLOM) * Oil Pan

Not Yet Reviewed

$7,373.99

BluePrint Builder Series 302W/370HP Standard Edition Crate Engine and 4R70W Transmission Combos

BluePrint Builder Series 302W/370HP Standard Edition crate engine and 4R70W transmission combos take away the hassle of properly pairing a carbureted Ford 302 Windsor mild performance engine and 4-speed automatic transmission for your build. These strong assemblies deliver 370 horsepower and 350 lbs.-ft. of torque with BluePrint aluminum cylinder heads and hydraulic roller camshaft to go with hypereutectic pistons, a steel crankshaft, and OEM-style connecting rods. The front accessory drive includes air conditioning and power steering provisions for the high strength cast iron block which features increased deck thickness and strength webbing. When you are looking for a new powertrain, go with the authority in crate engines and order your very own BluePrint Builder Series 302W/370HP Standard Edition crate engine and 4R70W transmission combo. More product features and details include: * Compression ratio of 9.5:1 * Camshaft offers 0.543 in. intake and 0.544 in. exhaust lift with 215 intake and 228 exhaust duration at 0.050 in. lift and a 112 LSA * Stroke is 3.000 in. with 5.090 in. long connecting rods * Block is a one-piece rear main seal, 4-bolt main setup with improved water jacket design * Ford rotating assembly is machined and balanced by BluePrint (50 oz. external balance) * BluePrint HP9009 cylinder heads provide a 60cc combustion chamber, 2.020 in. intake and 1.600 in. exhaust valves, plus 190cc intake/60cc exhaust runners * Ignition timing is 34 degrees total at 3,500 rpm * This combo also includes the 600 cfm carburetor, fuel pump, dual plane satin finished aluminum intake manifold, water pump, spark plugs/wires, valve covers, distributor (bronze gear not recommended), harmonic balancer, thermostat with housing, and a painted oil pan * Spark plug model BPP7938 NGK 7938 BKR5E (0.750 in. reach, 14mm thread, 5/8 in. hex, plug; gapped to 0.035 in.) * Harmonic balancer model BPP50 (50 oz., 6.4 in. diameter) Transmission features and details include: * Electronic transmission controller * Overdrive 4-speed with lockup built to 650 horsepower * Torque converter with 2,200-2,600 rpm advertised stall rating * Flexplate (50 oz. weighted) and starter * Gear ratios are 2.84:1 (first), 1.55:1 (second), 1.00:1 (third), 0.70:1 (overdrive), and 2.32:1 (reverse) * May require modifications/replacement of driveshaft, transmission mounts, exhaust routing, etc. * Throttle position sensor not included due to base setup being used for both carbureted and EFI versions Other notes: * Factory Five applications are a special order * Recommended fuel is 91 octane and recommended break-in oil is BPP710 * Initial timing is 10-16 degrees * Total timing is 32-34 degrees * Firing order is 1-3-7-2-6-5-4-8 * Painted Ford Blue * Not for EGR * Recommended headers include those made by Ultimate Headers, Hedman Husler race headers, and Sanderson headers

Not Yet Reviewed

$18,499.00

Chevrolet Performance L8T 6.6L 401 C.I.D Engine Assemblies

Chevrolet Performance L8T 6.6L 401 c.i.d. engine assemblies feature 401 hp and 464 lbs.-ft. of torque—the largest displacement Gen V LT family engine in the company's lineup. Direct injection offers more precise fuel control than port injection, enabling a comparatively high compression ratio of 10.8:1 in the engine, which contributes to its high output. These crate engines are built with a forged steel crankshaft and other high-strength parts. Additional features such as oil spray cooling for the pistons and a cast iron, long-skirt cylinder block with 6-bolt, cross-bolted main caps contribute to the engines' strength and durability. Production style exhaust manifolds are included. The L8T crate engine package comes complete from the throttle body to the oil pan, including the PVC tube, evap tube, oil dipstick, and oil fill tube and cap. It does not include the controller, harness, oxygen sensors, or a front-end accessory drive system. Product notes: * Engine is shipped with high-pressure direct-injection fuel pump installed * Front-end accessory drive system must be ordered separately and includes hydraulic power steering, with center pulley. Pulley-mounted fan not recommended. * Use front-end accessory drive system P/N 19433745 for applications with air conditioning and front-end accessory drive system P/N 19433746 for applications without air conditioning. * Includes 8-bolt flexplate for automatic transmissions * Used with Engine Control Kit 19433736 (must use 6L80 transmission). Includes programmed controller, wire harness, pedal, oxygen sensors and mounts, MAF, fuel line pressure sensor, and fuel pump power module. Specifications: * Engine: Wet sump L8T Gen 5 6.6L * Horsepower: 401 hp at 5,200 rpm * Torque: 464 lbs.-ft. at 4,000 rpm * Compression ratio: 10.8:1 * New Block: L8T cast iron 6-bolt 4.060 in. bore * Crankshaft: Forged steel, 3.860 in. stroke * Heads: 12703610 cast aluminum, 59.02cc * Valves: 2.130 in. hollow intake / 1.590 in. Inconel exhaust * Camshaft lift: Hydraulic roller 0.500 in. / 0.492 in. * Duration at 0.050 in.: 193 degrees / 199 degrees * Rocker arm ratio: 1.8 * Max RPM: 5600 * Stroke (in.): 3.860 * Heads, chamber size: Aluminum Gen V LT, 59.02cc * Cylinder bore diameter: 4.060

Not Yet Reviewed

$8,948.80

BluePrint Engines Pro Series Chevy LS 376 C.I.D. 525 HP EFI Deluxe Dressed Long Block Crate Engines

BluePrint Engines Pro Series Chevy LS 376 c.i.d. 525 hp Holley Terminator X EFI deluxe dressed engines are a masterclass in modern performance and reliability, delivering a robust 525 hp and 460 lb.-ft. of torque, with a 10.7:1 compression ratio that ensures streetable power and high-output efficiency. At the heart of this Pro Series engine are BluePrint's premium components, all working in concert with a nodular iron crankshaft, each chosen for strength and precision. Air and fuel management are handled by the Holley Terminator X Max system paired with a fabricated aluminum intake manifold, high-flow injectors, and a matching fuel rail kit. Tying it all together is a black or polished pulley kit delivering both form and function in a sleek, performance-ready package. Select the engine with the pulley finish preferred for your vehicle. Block specs: * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0622 in. bore * 6-bolt main Rotating assembly specs: * Nodular iron crankshaft * 3.622 in. stroke * 6.098 in. connecting rods with 150,000 psi bolts * BluePrint hypereutectic pistons * Internally balanced front and rear BluePrint LS3 aluminum cylinder heads specs: * 69cc chamber * 2.165 in. intake/1.590 in. exhaust valves * 259cc intake/102cc exhaust runners BluePrint hydraulic roller cam specs: * .612 in. intake/.585 in. exhaust lift * 225 degrees intake/238 degrees exhaust duration at .050 in. lift * 113 degree lobe separation Also includes: * LS3 fabricated aluminum intake manifold * Drive-by-Wire throttle body adds modern responsiveness * LS swap oil pan ensures seamless integration * Injectors and fuel rail kit * Spark plugs and wires * Harmonic balancer * Throttle pedal * Timing cover * Valve covers * Coil packs * Black or polished pulley kit: -- LS2-style water pump -- One-wire 140-amp alternator -- Peanut-style air conditioning compressor -- Type II power steering pump with remote reservoir Holley Terminator X Max features and benefits: * Real time fuel map learning simplifies tuning * On-board Bosch LSU 4.9 wideband control enables accurate AFR readings and closed loop tuning * Eight high-impedance injector drivers ideal for stock LS and Holley EFI injectors * Integrated 1-Bar MAP sensor for naturally aspirated or nitrous setups, with harness support for external higher bar sensors, if needed * Four configurable inputs (12 V, Ground, 5 V, Frequency) and two outputs (Ground, PWM) * Free PC Tuning Software via USB/CAN Interface for Full Laptop Control and Advance Setup * Integrated 3.5 in. touch screen handheld with Setup Wizard, internal data logging, and real time gauge displays * Terminator X Max ECU includes base timing map pre-configured for this engine

Not Yet Reviewed

$13,799.00

—

$13,899.00

BluePrint Pro Series Chevy LS 376 C.I.D. 700 HP EFI Supercharged Base Long Block Crate Engines

BluePrint Pro Series Chevy LS 376 c.i.d. EFI supercharged base long block crate engines deliver 700 hp and 640 lbs-ft. of torque. They include LS3 aluminum cylinder heads, forged pistons, hydraulic roller camshaft, and much more. The engines are available with or without a Holley Terminator X Max Gen IV complete ECU and harness for engine management. Additional specs and features: -- Block: * BluePrint Engines high-strength cast iron 6.2L block * Increased deck thickness and strength webbing * Extended cylinder skirt * Priority main oiling * 4.070 in. bore * 6-bolt main * One-piece rear main seal * Improved water jacket design * Compression Ratio: 9.5:1 -- Rotating assembly: * Nodular iron crankshaft * 3.622 in. stroke * 6.125 in. connecting rods with 150,000 psi bolts * Internally balanced front and rear -- Cylinder heads: * BluePrint aluminum cylinder heads * 70cc chamber * 2.165 in. Intake / 1.600 in. exhaust valves * 259cc intake / 102cc exhaust runners -- Cam specs: * Cam type: Hydraulic roller cam * .612 intake / .585 exhaust lift * 225 intake / 238 exhaust duration * At .050-113 degree lobe separation -- Also includes: * Magnuson TVS2650 Super Charger * Coil packs * Valve covers * Oil pan * Water pump * Sensors included * Drive-by-wire throttle body * Timing cover * Spark plugs and wires * Harmonic balancer -- Notes: * Not for use in pollution-controlled vehicles.

Not Yet Reviewed

$20,899.00

Chevrolet Performance LT1 6.2L E-Rod Long Block Crate Engines

Chevrolet Performance LT1 6.2L E-Rod long block crate engines have it all. They're architecturally similar to the LS family of small block engines, but with a unique block casting, cylinder head design, oiling system, and more. LT1 engines also combine advanced technologies—including direct-injection and continuously variable valve timing to support an advanced combustion system. Offered with a wet-sump or dry-sump oiling system, the Chevy E-Rod engine systems include the specially designed engine controller for retro-fit applications and harness needed to get the engine running. Engine specs and features: * Cast aluminum with 6-bolt nodular iron main bearing caps * Direct-injection, spark-ignition Gen-V small block V8 * Horsepower: 455 at 6,000 rpm * Torque: 465 lbs.-ft. at 4,600 rpm * Crankshaft: Forged steel * Connecting rods: Forged powdered metal * Pistons: Eutectic * Camshaft type: Billet steel roller * Valve lift (in.): .561 intake/.531 exhaust * Camshaft duration (at 0.050 in.): 200 degrees intake/212 degrees exhaust * Cylinder heads: Aluminum, rectangular port D/I * Valve size (in.): 2.13 intake/1.59 exhaust * Compression ratio: 11.5:1 * Rocker arms: Investment-cast, roller trunnion * Rocker arm ratio: 1.81:1 * Recommended fuel: Premium pump * Maximum recommended rpm: 6,600 * Reluctor wheel: 58x * Balanced: Internal * Engine control module * Exhaust manifolds * Catalytic converters * Mass airflow sensor and sensor boss * Oxygen sensors and sensor bosses * Air filter * Accelerator pedal * Evaporative emissions canister * Instruction manual

Not Yet Reviewed

$12,803.20

—

$13,458.59

BluePrint Pro Series Chevy LS 427 C.I.D. 800 HP EFI Supercharged Deluxe Long Block Crate Engines

BluePrint Pro Series Chevy LS 427 ci.d. EFI supercharged deluxe long block crate engines deliver 800 hp and 780 lbs.-ft. of torque. They also include LS3 aluminum cylinder heads, forged pistons, hydraulic roller camshaft, forged crankshaft, a Holley Terminator X Max Gen IV complete ECU and harness for engine management, and a polished or black finish accessory drive system. Additional features and specs: -- Block: * BluePrint Engines high-strength cast iron block * Increased deck thickness and strength webbing * Extended cylinder skirt * Priority main oiling * 4.070 in. bore * 6-bolt main * One-piece rear main seal * Improved water jacket design * Utilizes OEM LS3 front and rear covers * Compression ratio: 11:1 -- Rotating Assembly: * New forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced -- Cylinder Heads: * BluePrint aluminum cylinder heads * 70cc chamber * 2.165 in. intake / 1.600 in. exhaust valves * 259cc intake / 102cc exhaust runners -- Cam Specs: * Hydraulic roller * .624 intake / .624 exhaust lift * 239 intake / 255 exhaust duration * At .050-114 degree lobe separation -- Ignition Timing: * ECM supplied with calibration -- Also Includes: * Holley Terminator X Max - Gen IV complete ECU/Harness EFI system * Magnuson TVS2650 supercharger * Coil packs * Valve covers * Oil pan * All sensors required for engine to run * Drive-by-wire throttle body * Timing cover * Spark plugs and wires * Harmonic balancer * Front accessory drive with power steering pump, water pump, alternator, and air compressor -- Notes: * Not for use in pollution-controlled vehicles. * BluePrint Engines recommends air intake kit BPPLS01013 to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU / tuning.

Not Yet Reviewed

$26,099.00

—

$26,199.00

Modern Classic Series '63 Fuelie Crate Engines

Modern Classic Series '63 Fuelie crate engines come with the complete line of Modern Classic Series components pre-installed and ready to drop-in your classic ride. These crate engines start with a brand new, GM 495 hp "Hot Cam" LS3 right out of the box. They are then painted orange, or left natural, and are assembled with an Modern Classic Series vintage inspired 1963 Fuelie style intake kit, billet aluminum valley pan, and small block style valve covers of your choice. These packages include a Holley Terminator engine management system and wiring harness with a GM electronic transmission controller. Once completely assembled, the Holley ECU is loaded with a start-up tune and the engines are run to check for leaks and oil pressure. Pricing varies depending on the engine's options. Specifications include: * Compression ratio of 10.7:1 * Recommended fuel is 92 octane * Cast aluminum block with 6-bolt cross-bolted main caps * Nodular iron crankshaft * Powdered metal connecting rods * Hypereutectic aluminum pistons * Steel hydraulic roller tappet camshaft * Valve lift of 0.525 in. for intake and exhaust * Duration at 0.050 in. is 219 degrees intake and 228 degrees exhaust * Lobe separation angle is 112 degrees * Combustion chamber volume is 68cc * Valve diameter is 2.165 in. for the intake and 1.590 in. for exhaust * Cast-roller trunnion rocker arms with a 1.7:1 ratio * Internally balanced * 58x Gen IV reluctor wheel * Maximum recommended rpm is 6,600 * Recommended torque converter stall is 2,400-2,800 Engines include: * Fully assembled long block * Holley Terminator engine management system with O2 sensor and transmission control * Modern Classic Series '63 Fuelie intake manifold system with GM throttle body and injectors * Oil pump, pick-up and Camaro style oil pan * Billet aluminum valley plate with oil fill tube and breather cap * Intake manifold, fuel injectors and throttle body * Harmonic balancer * Front timing cover * Oil filter and passenger side oil dipstick and tube * High-performance rear dump exhaust manifolds * 14.000 in. automatic transmission flexplate

Not Yet Reviewed

$27,055.95

—

$27,374.95

BluePrint Builder Series LS376/700HP Supercharged Crate Engine and T56 Trans Combos

The BluePrint Builder Series LS376/700 hp Supercharged crate engine and T56 trans combo is a complete, pre-assembled, high-performance drivetrain package delivering 700 hp and 640 lbs.-ft. of torque. It pairs a supercharged 6.2L (376 cu. in.) LS-style engine with a rugged Tremec T56 6-speed manual transmission, designed as a ready-to-install solution for performance builds. Key features and components: * Power and performance: The engine is dyno-tested to produce a substantial 700 hp and 640 lbs.-ft. of torque, running on 91+ octane fuel * Engine block: It utilizes a BluePrint Engines high-strength cast iron LSX-style block, featuring increased deck thickness and webbing for enhanced durability under boost, a 6-bolt main design, and priority main oiling. * Rotating assembly: Internals are built for strength, including a nodular iron crankshaft, forged connecting rods with 150,000 psi bolts, and forged pistons * Supercharger and EFI: A Magnuson TVS 2650 supercharger provides forced induction, managed by a complete Holley Terminator X Max Gen IV ECU and harness system for precise engine control and tuning * T56 transmission: The engine is mated to a Tremec T56 manual transmission and includes a McLeod Super Steel Pro dual disk clutch, steel bellhousing, and a billet flywheel—all pre-assembled and shipped as one unit * Complete package: The combo comes fully dressed with necessary components, including: -- Front accessory drive (water pump, alternator, power steering pump, and A/C compressor) -- All sensors, coil packs, spark plugs, and wires required for the engine to run -- Low-profile LS swap oil pan -- Drive-by-wire throttle body and pedal * This combination is designed to simplify complex engine and transmission swaps by providing a complete, pre-calibrated, and fully assembled drivetrain, saving significant build time and effort

Not Yet Reviewed

$30,099.00

—

$32,599.00

Modern Classic Series Tri-Power Crate Engines

Modern Classic Series Tri-Power crate engines come with the complete line of Modern Classic Series components pre-installed and ready to drop-in your classic ride. These crate engines start with a brand new, GM 495 hp "Hot Cam" LS3 right out of the box. They are then painted orange or left natural, and are assembled with an Modern Classic Series vintage inspired Tri-Power intake kit with dual throttle bodies, chrome air cleaner, billet aluminum valley pan, and big block Chevy-style valve covers of your choice. These packages include a Holley Dominator engine management system and wiring harness with a GM electronic transmission controller. Once completely assembled, the Holley ECU is loaded with a start-up tune and the engines are run to check for leaks and oil pressure. Pricing varies depending on the engine's options. Specifications include: * Compression ratio of 10.7:1 * Recommended fuel is 92 octane * Cast-aluminum block with 6-bolt cross-bolted main caps * Nodular iron crankshaft * Powdered metal connecting rods * Hypereutectic aluminum pistons * Steel hydraulic roller tappet camshaft * Valve lift of 0.525 in. for intake and exhaust * Duration at 0.050 in. is 219 degrees intake and 228 degrees exhaust * Lobe separation angle is 112 degrees * Combustion chamber volume is 68cc * Valve diameter is 2.165 in. for the intake and 1.590 in. for exhaust * Cast roller trunnion rocker arms with a 1.7:1 ratio * Internally balanced * 58x Gen IV reluctor wheel * Maximum recommended rpm is 6,600 * Recommended torque converter stall is 2,400-2,800 Engines include: * Fully assembled long block * Holley Dominator engine management system with O2 sensor and transmission control * Tri-Power intake system with chrome air cleaner, dual GM throttle bodies and injectors * Oil pump, pick-up and Camaro style oil pan * Billet aluminum valley plate with integral breather * Intake manifold, fuel injectors and throttle body * Harmonic balancer * Front timing cover * Oil filter and passenger side oil dipstick and tube * High-performance rear dump exhaust manifolds * 14.000 in. automatic transmission flexplate

Not Yet Reviewed

$31,856.95

—

$32,597.95

Modern Classic Series 14 in. Classic Crate Engines

Modern Classic Series 14 in. classic crate engines come with the complete line of Modern Classic Series components pre-installed and ready to drop-in your classic ride. These crate engines start with a brand new, GM 495 hp "Hot Cam" LS3 right out of the box. They are then painted orange, or left natural, and are assembled with an Modern Classic Series vintage inspired 14 in. Classic air cleaner kit with chrome air cleaner, billet aluminum valley pan, and small block, big block or 409 Chevy-style valve covers of your choice. Once completely assembled, the Holley ECU is loaded with a start-up tune, and the engines are run to check for leaks and oil pressure. Pricing varies depending on the engine options. Specifications include: * Compression ratio of 10.7:1 * Recommended fuel is 92 octane * Cast aluminum block with 6-bolt cross-bolted main caps * Nodular iron crankshaft * Powdered metal connecting rods * Hypereutectic aluminum pistons * Steel hydraulic roller tappet camshaft * Valve lift of 0.525 in. for intake and exhaust * Duration at 0.050 in. is 219 degrees intake and 228 degrees exhaust * Lobe separation angle is 112 degrees * Combustion chamber volume is 68cc * Valve diameter is 2.165 in. for the intake and 1.590 in. for exhaust * Cast roller trunnion rocker arms with a 1.7:1 ratio * Internally balanced * 58x Gen IV reluctor wheel * Maximum recommended rpm is 6,600 * Recommended torque converter stall is 2,400-2,800 Engines include: * Fully assembled long block * Holley Terminator engine management system with O2 sensor and transmission control * 14 in. Classic intake system with chrome air cleaner, GM throttle body and injectors * Oil pump, pick-up and Camaro style oil pan * Intake manifold, fuel injectors and throttle body * Harmonic balancer * Front timing cover * Billet aluminum valley plate with oil fill tube and breather cap * Oil filter and passenger side oil dipstick and tube * High-performance rear dump exhaust manifolds * 14.000 in. automatic transmission flexplate

Not Yet Reviewed

$23,621.95

—

$24,592.95

BluePrint Builder Series LS376/530HP Standard Edition EFI Crate Engine and TKX Transmission Combos

BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a polished pulley kit and TKX manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 5-speed TKX Transmission Package: * McLeod Super Street Pro twin-disc clutch * Hydraulic throwout bearing * Bellhousing * Non-weighted billet flywheel * Starter * Gear ratios are 2.87:1 (first), 1.89:1 (second), 1.28:1 (third), 1.00:1 (fourth), and 0.68:1 (fifth) * Torque converter with 2,200–plus rpm stall Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plug wires * Champion 3015 spark plugs (0.040 in. gap) * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys. Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.

Not Yet Reviewed

$19,699.00

—

$21,999.00

BluePrint Builder Series LS427/605HP Standard Edition EFI Crate Engine and TKX Transmission Combos

BluePrint Builder Series LS427/605HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 605 horsepower, this standard edition builder series includes a TKX manual transmission and pulley kit (pulley kit is an optional add-on, depending on the specific engine package you purchase). The aluminum BluePrint Engines cylinder heads help produce a nice 11.1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 565 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/605HP Standard Edition EFI crate engine and TKX transmission combos. Other product features, items, and specifications: * BluePrint Engines High Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0665 in. bore * 6-bolt main Rotating Assembly: * Forged crankshaft * Stroke – 4.125 in. * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced (front and rear) Cylinder Heads: * BluePrint cast aluminum PS8015 models * Chamber – 70cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft Specs: * Hydraulic roller * Intake valve lift – 0.624 in. * Exhaust valve lift – 0.624 in. * Intake duration at 0.050 in. of lift – 239 * Exhaust duration at 0.050 in. of lift – 255 * Lobe separation angle (LSA) – 114 degrees Ignition Timing: * ECM supplied calibration Assembled TKX Transmission Package: * McLeod Super Street Pro dual-disc clutch * Hydraulic throw-out bearing * Bell housing * Billet flywheel * Engine guard * Starter * Gear ratios are 2.87:1 (first), 1.89:1 (second), 1.28:1 (third), 1.00:1 (fourth), and 0.68:1 (fifth) Other Components: * MLL-BLS4273KBTKX and MLL-BLS4273KTKX engine/trans combo packages include: Front accessory drive with LT1 style 150-amp alternator, LT1 Style water pump, Type II power steering pump with baffled edges, and compact style A/C compressor * Holley Terminator X Max - Gen IV Complete ECU/Harness EFI System * LS Swap oil pan, windage tray, pickup screen * BluePrint Engines fuel injectors and rail * DBW throttle body * Throttle pedal, and sensors * GM plastic intake manifold * Spark plugs and wires * Harmonic balancer * Coil packs Important Notes: Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. BluePrint Engines recommends air intake kit BPPLS01013 to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning. Engine/Trans Package Ships assembled.

Not Yet Reviewed

$24,099.00

—

$26,499.00

Page 1 of 2
Next