Crate Engines, Short Blocks, Engine & Transmission Combos

BluePrint Engines GM 350 C.I.D. 260 HP TBI Long Block Crate Engines

BluePrint Engines GM 350 C.I.D. 260 HP TBI Long Block Crate Engines have been tested in a factory-equipped 1987-95 OEM 5.7 truck with factory torque converter, fueling system, and ECU, while using 87 octane fuel. These increased horsepower, replacement long blocks are designed specifically to install in 1987-95 TBI trucks without any tuning or fuel system upgrades required. Recommended spark plugs are ACDelco CR43TS with .035 in. gap. Customers will re-use their existing intake manifold, ECU, and fuel system from '87-95 truck engine. This is an excellent upgrade for your truck, gaining roller cam, 4-bolt main, and horsepower; otherwise retaining stock components, such as torque converter and exhaust. * SPECIFICATIONS: HP and Torque: 260 hp / 342 lbs.-ft. Gain of up to 50 hp and 42 lbs.-ft. vs factory Compression Ratio: 9.1:1 1987-1995 GM Iron Heads Hydraulic Roller Cam Cast Steel Crankshaft Hypereutectic Pistons * BLOCK: NEW BluePrint Block 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Steel Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear * CYLINDER HEADS: 1987-1995 GM Iron Cylinder Heads 64cc chamber 1.94 in. intake/1.50 in. exhaust valves * CAM SPECS: Cam Type: Roller .447 Intake, .459 Exhaust 201 Intake / 208 Exhaust duration At .050 - 117 degree lobe separation * IGNITION TIMING: Controlled by OEM Computer * ALSO INCLUDES: New valve covers Oil pan Timing cover Harmonic Balancer Dyno test results shipped with engine * WARRANTY: 30 month / 50,000 mile * NOTES: Not for use in pollution-controlled vehicles

Not Yet Reviewed

$5,999.00

BluePrint Engines GM 383 C.I.D. 436 HP Base Stroker Long Block Crate Engines

BluePrint Engines GM 383 c.i.d. 436 hp base stroker long block crate engines will provide you a great foundation to return your vehicle to the performance level you desire. They feature a new one-piece rear main BluePrint engine block with 4-bolt mains and passenger side dipstick. Inside the block is a cast crankshaft and connecting rod rotating assembly, with 10.1:1 compression hypereutectic pistons hung on the end. The full roller camshaft provides .544 intake/555 exhaust lift with 230 intake/236 exhaust duration at .050 with a 110 degree lobe separation. The engines also include a new oil pan, a set of valve covers, and a timing cover to finish them off.

4.78 out of 5 stars ( 27 )

$6,199.00

—

$9,299.00

ATK High Performance GM 350 345 HP Stage 1 Long Block Crate Engines

ATK High Performance GM 350 345 hp/400 lbs.-ft. Stage 1 long block crate engines are classics with great street manners, and vacuum to power all your accessories. These Stage 1 or base engines are designed for those that may have their own component parts already, and who also are interested in completing out the build themselves. Typically ATK GM 350 345 hp base long block engines consist of: * Seasoned OE short block with 4-bolt mains * OE cast crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic pistons * Moly piston rings * Hydraulic roller camshaft * 220/224 at .050 in. * .495 in./502 in. lift 110 LSA * ATK cast iron cylinder heads * 76cc combustion chambers * 165cc intake runners * 1.94 in./1.5 in. valves * Stamped steel 1.5 ratio rocker arms * Valve covers * Timing set and cover * Oil pan, high volume oil pump with pick-up tube

3.77 out of 5 stars ( 13 )

$3,198.99

VEGE Chevrolet 350 C.I.D. Vortec Remanufactured Long Block Crate Engines

VEGE Chevrolet 350 C.I.D. Vortec remanufactured long block crate engines are reverse engineered to ensure that any original defects are removed, saving you time and money. Each crate engine can produce 290+ hp and 375+ ft.-lbs. of torque when it's equipped with a high-rise dual plane intake and 650 cfm carburetor. Start your budget-minded build with an excellent foundation--a VEGE Chevrolet 350 c.i.d. Vortec remanufactured long block crate engine. Engine specifications: * Block: Seasoned GM 350 c.i.d. block -- 2-bolt main -- One-piece rear seal * Bore/stroke: Up to 4.060 in. x 3.480 in. * Displacement (cu.in): 350 c.i.d. * Crankshaft: OE cast * Rods: OE reconditioned PM rods * Pistons: Hypereutectic 9.4:1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: -- 191/194 at 50 -- .414 intake/.428 exhaust -- 111 LSA * Cylinder heads: -- OE Vortec 64cc -- 1.94 intake/1.50 exhaust * Rocker arms: Stamped steel 1.5 ratio * Oil pan: Stock 5 qt. * Valve covers: Chrome center bolt * Timing cover: Chrome Note: Can work with factory Vortec system or used as a retrofit with Vortec dual plane intake and carburetor.

Not Yet Reviewed

$3,099.99

BluePrint High Torque GM 377 C.I.D. Base Stroker Long Block Crate Engines

BluePrint high torque GM 377 c.i.d. base stroker long block crate engines will provide you a great foundation to return your vehicle to the performance level you desire. They feature a new one-piece rear main BluePrint engine block with 4-bolt mains. Inside the block is a cast crankshaft and connecting rod rotating assembly, with 9.1:1 compression hypereutectic pistons. The full roller camshaft provides 0.481 intake/0.480 exhaust lift with 187 intake/193 exhaust duration at .050 with a 97 degree lobe separation. The engines also include a new oil pan, a set of valve covers, and a timing cover to finish them off. We purchased the last of these new-in-the-box engines from Blueprint. This means we cannot extend a warranty from the manufacturer; however, we do offer our standard 90-day handshake guarantee. This is a last chance opportunity, once they're gone we won't be able to order more--so grab one while you can! Engine specifications: * All new and dyno tested 377 c.i.d. small block Chevy compatible engine * Cast crankshaft with hypereutectic pistons * 4.000 in. bore and 3.750 in. stroke * Aluminum heads with 67cc chamber, 1.500 in. exhaust, and 1.940 in. intake valve * Accommodates 8- or 12-bolt intake manifolds * Requires electric fuel pump (not machined for mechanical fuel pumps) * Harmonic balancer included

4.0 out of 5 stars ( 2 )

$4,799.99

ATK High Performance Chevy 383 Stroker 470 HP Mid-Dress Long Block Crate Engines

Looking for an engine that puts out big power and sounds flat out NASTY!? You will find those features and more with ATK High Performance Chevy 383 Stroker 470 hp long block crate engines. Engine includes: * Intake manifold: Weiand Stealth dual plane * Harmonic balancer: PowerBond 8 in. internal balance * Distributor: MSD GM HEI distributor * Includes a GM long water pump Specifications: * Horsepower: 470 hp at 5,200 rpm * Torque: 490 lb.-ft. at 4,800 rpm * Block: Seasoned GM 4-bolt main with one-piece seal and passenger side dipstick * Crankshaft: Scat nodular iron * Connecting rods: Scat 4340 Forged I-beam with ARP 8740 bolts * Pistons: Forged * Piston rings: Moly rings * Compression ratio: 10:1 compression * Camshaft: Hydraulic roller * Camshaft specifications: 224/236 duration at .050 and .591in/.591ex lift with a 108 degree lobe separation * Cylinder heads: Dart SHP aluminum 72 cc chamber with 2.02 in. intake and 1.60 in. exhaust valves * Rocker arms: Billet 1.6 ratio aluminum roller rockers * Oil pan: Original-style 5-quart pan * Oil type: 10W30 * Recommended plug gap: 0.035 in. * Water pump: Designed to use a long water pump * Fuel type: Dyno testing was done using 91 octane fuel * A 2,500 rpm+ torque converter is recommended for best results * Engine will not produce enough vacuum for power brakes

Not Yet Reviewed

$5,898.99

BluePrint Engines GM 383 C.I.D. Stroker Short Block Plus Engines

BluePrint Engines GM 383 c.i.d. short block plus stroker engines are always balanced and ready for you to finish assemble. Whether you're building a kit car, race car, hot rod, or just a sweet old memory, BluePrint Engines are ready to add a lot of muscle to your fun! Block details: * 4-bolt main * Passenger side dipstick * Cylinder wall thickness "sonic-tested" * Cylinders computer-honed to tolerance of .0002 in. Rotating assembly details: * Crankshaft * Pistons * Connecting rods * Moly rings * High-volume oil pump * Heavy-duty single roller timing set * Harmonic balancer * Hydraulic roller camshaft and lifters * Oil pan * Brass freeze plugs

4.56 out of 5 stars ( 9 )

$5,999.00

ATK High Performance GM 350 390 HP Stage 1 Long Block Crate Engines

Awesome performance and awesome looks combine with these ATK High Performance GM 350 390 hp Stage 1 long block crate engines. They are topped with trick looking parts and they have the power to back them up. These engines are hand-assembled and balanced to help them put out 390 hp and 420 ft.-lbs. of torque that will tear up the street or strip. Whether you are looking to pack some more power in your street rod, muscle car, or truck, ATK has you covered. ATK GM 350 390 hp Stage 1 long block crate engines include: * Handpicked, remanufactured block * ATK High Performance aluminum cylinder heads with 2.020 in. /1.600 ex. valves * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

4.4 out of 5 stars ( 15 )

$3,798.99

ATK High Performance GM 350 345 HP Stage 2 Long Block Crate Engines

Give your old ride new life with these ATK High Performance GM 350 345 hp/400 lbs.-ft. Stage 2 long block crate engines. These engines are built to perform and look great without breaking your budget. Each engine is expertly assembled, balanced, blueprinted, and topped with quality components, making it a solid, reliable mill to power your muscle car, street rod, or pickup. ATK GM 350 345 hp Stage 2 long block crate engines include: * Handpicked, OE remanufactured block * ATK cast iron 75cc/165cc 1.94/1.50 cylinder heads * ATK dual plane intake manifold * OE crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic pistons * Moly rings * Hydraulic roller camshaft .495in/.502ex 110LSA * Stamped steel 1.5 ratio rocker arms * HEI distributor, plug wires and plugs * Valve covers * Timing cover and double roller timing set * 5 qt. oil pan, high volume oil pump with pickup tube * OE style long water pump * PowerBond 8 in. balancer and 168 tooth flexplate

5.0 out of 5 stars ( 2 )

$3,635.99

BluePrint Engines GM 383 C.I.D. 410 HP Stoker Dressed Long Blocks with Aluminum Heads

BluePrint Engines GM 383 c.i.d. 410 hp stoker dressed long blocks with aluminum heads are great choices for those who demand a drivable, reliable high performance engine. All small block Chevy 383 rotating assemblies are balanced within 2 grams on a state-of-the-art computerized balancer. In addition, each engine is dyno-tested and is then shipped with a documentation of the engine's high performance power curve. Key features and parts may include: * Handpicked seasoned block * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer controlled machine to within .0002 straightness and roundness * Cylinders are sonic tested for thickness * Passenger side dipstick * Drilled and tapped for clutch linkage * BluePrint cast steel crankshaft * OEM-type connecting rods with 150,000 psi bolts * Hypereutectic pistons * Aluminum cylinder heads * Hydraulic roller camshaft * Valve covers * Oil pan and timing cover * HEI distributor * Carburetor * Aluminum intake manifold * BluePrint Engines 30 month/50,000 mile warranty

4.8 out of 5 stars ( 5 )

$7,099.00

ATK High Performance Chevy 383 Stroker 460 HP Complete Long Block Crate Engines

Looking for an engine that puts out big power and sounds flat out NASTY!? You will find those features and more with ATK High Performance Chevy 383 Stroker 460 hp long block crate engines. Engine includes: * Carburetor: Quick Fuel 680 cfm vacuum secondary * Intake manifold: Weiand Stealth Dual Plane * Spark plugs: Autolite 3923 plugs * Harmonic balancer: PowerBond 8 in. internal balance * Fuel pump: Holley 110gph mechanical pump * Distributor: MSD GM HEI Distributor * Includes a GM long water pump Specifications: * Horsepower: 460 hp at 5,200 rpm * Torque: 490 lb.-ft. at 4,800 rpm * Block: Seasoned GM 4-bolt main with one-piece seal and passenger side dipstick * Crankshaft: Scat Nodular Iron * Connecting rods: Scat 4340 Forged I-beam with ARP 8740 bolts * Pistons: Forged * Piston rings: Moly rings * Compression ratio: 10:1 compression * Camshaft: Hydraulic roller * Camshaft specifications: 224/236 duration at .050 and .591in/.591ex lift with a 108 degree lobe separation * Cylinder heads: Dart SHP aluminum 72 cc chamber with 2.02 in. intake and 1.60 in. exhaust valves * Rocker arms: Billet 1.6 ratio aluminum roller rockers * Oil pan: Original-style 5-quart pan * Oil type: 10W30 * Recommended plug gap: 0.035 in. * Water pump: Designed to use a long water pump * Fuel type: Dyno testing was done using 91 octane fuel * A 2,500 rpm+ torque converter is recommended for best results * Engine will not produce enough vacuum for power brakes

4.67 out of 5 stars ( 3 )

$6,698.99

ATK High Performance GM 350 330 HP Stage 3 Long Block Crate Engines

Give new life to your ride with ATK High Performance GM 350 330 hp/380 lbs.-ft. Stage 3 long block crate engines. They are based on the tried-and-true small block Chevy and are built to perform right out of the box. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Stage 3 long block crate engines include: * Handpicked, OE remanufactured blocks * ATK cast iron cylinder heads * 76cc combustion chambers * 165cc intake runners * 1.94 in./1.5 in. valves * ATK dual plane Intake manifold * OE crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic flat-top pistons * Hydraulic flat tappet camshaft * .465 int./.488 exh. cam lift * 224 int./234 exh. cam duration at 0.50 * 9.1:1 compression * Distributor, spark plugs, and plug wires * Valve covers * Timing cover and double roller timing set * Oil pan, pump, and pickup tube * OE style long water pump * Balancer and 168 tooth flexplate

3.63 out of 5 stars ( 8 )

$4,754.99

BluePrint Engines GM 396 C.I.D. 530 HP Stroker Base Long Block Crate Engines

BluePrint Engines presents their all-forged small block Chevy-compatible engine, built for hard-hitting racing performance. Available carbureted or fuel injected, they are designed to handle extreme conditions and come packed with race-proven components. Select the best engine for your build. BluePrint Motorsports GM small block-compatible 396 cu. in. engines base-dressed crate engines will include either a Holley 950cfm double pumper carburetor with mechanical secondaries or a Holley Sniper 2 EFI self-tuning kit in chrome, along with the following: * BluePrint Engines aluminum intake manifold * BluePrint Engines valve covers * Moroso Street/Strip oil pan * HEI distributor * High-volume oil pump * Timing cover * Balancer Specifications and features for both carbureted and fuel injected engines: * 530 hp/480 lb.-ft. of torque * Compression ratio: 10.4:1 * Requires Race Fuel of 100+ octane * BluePrint Engines high-strength cast iron block -- Cylinders honed on computer-controlled machine to within .0002 straightness and roundness -- Cylinders are sonic tested for thickness -- Drilled and tapped for clutch linkage -- Align honed main bearing bore -- Mechanical fuel pump provision -- Passenger side dipstick -- One-piece rear main seal -- 4-bolt main -- 4.000 in. bore * Rotating assembly -- BluePrint forged crankshaft -- 3.875 in. stroke -- Forged I-beam 6.000 in. connecting rods -- BluePrint Engines forged 4032 pistons -- Internally balance front--externally balanced rear * BluePrint aluminum cylinder heads -- 64cc chamber -- 2.08 in. intake/1.60 in. exhaust valves -- 220cc intake/67cc exhaust runners * Hydraulic roller camshaft -- .638 intake/.622 exhaust lift -- 251 intake/259 exhaust duration at .050 in. -- 114-degree LSA * Ignition timing: 34 degrees total Note: BluePrint Motorsports engines are built for maximum performance and are intended for extreme duty applications. Because of the high-stress nature of their use, these engines are sold without any warranty, expressed, or implied.

Not Yet Reviewed

$8,299.00

ATK High Performance Chevy 383 Stroker 470 HP Base Long Block Crate Engines

Looking for an engine that puts out big power and sounds flat out NASTY!? You will find those features with ATK High Performance Chevy 383 Stroker 470 hp base long block crate engines. Engine specifications include: * Horsepower: 470 hp at 5,200 rpm * Torque: 490 lb.-ft. at 4,800 rpm * Block: Seasoned GM 4-bolt main with one-piece seal and passenger side dipstick * Crankshaft: Scat nodular iron * Connecting rods: Scat 4340 forged I-beam with ARP 8740 bolts * Pistons: Forged * Piston rings: Moly rings * Compression ratio: 10:1 compression * Camshaft: Hydraulic roller * Camshaft Specifications: 224/236 duration at .050 and .591in/.591ex lift with a 108 degree lobe separation * Cylinder heads: Dart SHP aluminum 72cc chamber with 2.02 in. intake and 1.60 in. exhaust valves * Rocker arms: Billet 1.6 ratio aluminum roller rockers * Oil pan: Original-style 5-quart pan * Engine will not produce enough vacuum for power brakes

Not Yet Reviewed

$5,198.99

ATK High Performance GM 383 TBI Stroker 320 HP Stage 1 Long Block Crate Engines

Experience the torque that only a stroker can give you with ATK High Performance GM 383 TBI Stroker 320 hp long block crate engines. These engines crank out 320 hp and 395 ft.-lbs. of torque, perfect for your pulling rig, RV, or muscle truck. They are hand-assembled and precisely balanced to create smooth-running, reliable engines for your ride. ATK GM 383 TBI Stroker Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * OE cast iron TBI cylinder heads * Nodular steel crankshaft and 4340 I-beam connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .435 int./.462 exh. * Cam duration at 0.50- 198 int./210 exh. * 9.5:1 compression * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

1.0 out of 5 stars ( 1 )

$3,998.99

BluePrint Engines GM 383 C.I.D. 436 HP Dressed Stroker Long Block Crate Engines

Bolt some serious power into your ride with a BluePrint GM 383 c.i.d. 436 hp dressed Stroker long block crate engine. They're built from the ground up to provide a reliable 436 hp and 443 lbs.-ft. of torque to power your street rod, musclecar, or any other project that needs serious power. Each engine is hand-assembled and precision-balanced to ensure it will run smooth and strong for years to come. Three models are available; compare options and order the engine that best fits your needs. Product features and specifications: * 4-bolt main block * New cast crankshaft * Hypereutectic pistons * Chevy heavy beam rods with 150,000 psi bolts * Moly rings * Balanced rotating assembly * Melling high-volume oil pump * Hydraulic roller lifter camshaft * .544 intake / .555 exhaust * 230 intake / 236 exhaust duration at .050 * 110 degree lobe separation * Heavy-duty double roller timing set * Aluminum cylinder heads * Hardened retainers and springs * Swirl polished intake and exhaust valves * Hardened pushrods * Dual plane satin finish intake manifold * Carburetion * Distributor, plug wires and plugs * New valve covers * Dyno tested—and shipped with results

4.79 out of 5 stars ( 62 )

$7,299.00

—

$8,399.00

BluePrint Engines 350 C.I.D. Cruiser Fully Dressed Crate Engines

BluePrint Engines 350 c.i.d. Cruiser fully dressed crate engines make an great choice for daily drivers and cruising. These fully dressed engines make up to 18 in. of vacuum and work excellent with power brakes, stock torque converter and stock gearing and they will run on 87 octane fuel. Details and specs: * 341 hp/371 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating Assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder Heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners Roller Cam specs: * .477 intake/.471 exhaust * 202 intake/212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Harmonic balancer * Spark plugs * Spark plug wires * Standard rotation long style water pump * Waterneck and thermostat * Fuel pump * Oil pan * Timing cover * Aluminum intake * HEI distributor * 600 cfm carburetor * Dyno test results shipped with engine

4.28 out of 5 stars ( 29 )

$6,199.00

—

$8,199.00

BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block Crate Engines

BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block crate engines are available with fuel injection—and base or deluxe carbureted models. SPECIFICATIONS FOR ALL MODELS INCLUDE: * HP and Torque: 390 hp / 410 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum Heads * Hydraulic Roller Cam * Cast Iron Crankshaft * Hypereutectic Pistons * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Aluminum intake HEI distributor Dyno test results shipped with engine 30 month / 50,000 warranty INCLUDED ONLY WITH FUEL INJECTION MODEL BP3505CTF: * EFI system INCLUDED ONLY WITH BASE CARBURETED MODEL BP3505CTC: * 670 cfm carburetor INCLUDED ONLY WITH DELUXE CARBURETED MODEL BP3505CTCD: * Harmonic balancer * Spark plugs * Spark plug wires * Standard Rotation Long Style Water Pump * Waterneck and Thermostat * Fuel Pump * 670 cfm carburetor

4.8 out of 5 stars ( 10 )

$5,899.00

—

$6,999.00

ATK High Performance GM 350 Vortec 290 HP Stage 3 Long Block Crate Engines

ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires

3.78 out of 5 stars ( 9 )

$3,625.99

BluePrint Engines GM 400 C.I.D. 500 HP Dressed Long Block Crate Engines

Dressed for high performance, BluePrint Engines GM 400 c.i.d. 500 hp long block crate engines are not your grandpa's 400! Built by skilled craftsmen, these blocks are assembled with ignition and carburetor, as well as valve covers, oil pan, and timing cover. The most complete crate engine available, they offer you fast, easy installation. And because they're dyno-tested, you can be sure all the components will work together perfectly! BluePrint's GM 400 c.i.d. 500 hp dressed engines feature: * Cast iron block with 4-bolt mains * Compression ratio: 10.3:1 * Forged crankshaft * 5.7 in. connecting rods * 150,000 psi rod bolts * Forged pistons * Hydraulic roller cam * BluePrint aluminum heads with 64cc chamber * Intake manifold dual plane, satin aluminum * Carburetor * Dyno test results shipped with engine * 30-month/50,000-mile warranty

4.25 out of 5 stars ( 12 )

$8,199.00

—

$10,699.00

BluePrint Engines GM 350 C.I.D. 390 HP Long Block Crate Engines

BluePrint Engines GM 350 C.I.D. 390 HP Long Block crate engines deliver 390 hp and 410 lbs.-ft. of torque. They feature aluminum heads, hydraulic roller cam, cast iron crankshaft, hypereutectic pistons, and a compression ratio of 9.2:1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty

4.08 out of 5 stars ( 12 )

$5,299.00

BluePrint Engines GM 327 C.I.D. 350 HP Deluxe Dressed Long Block Crate Engines

BluePrint Engines GM 327 c.i.d. 350 hp fully dressed long block crate engines are available with a Holley Sniper EFI system or a 670 cfm carburetor with electric choke. BASIC ENGINE SPECS: * HP and torque: 350 hp / 350 lbs.-ft. * Compression ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Forged crank * Hypereutectic pistons BLOCK: * NEW BluePrint cast iron block * 4-bolt main * 4.000 in. bore * 1-Piece rear main seal * Mech fuel pump provision: Yes * Passenger side dipstick * Drilled and tapped for clutch linkage ROTATING ASSEMBLY: * New BluePrint forged crankshaft * 3.250 in. stroke * Forged 5.700 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internal Front / External Rear CYLINDER HEADS: * BluePrint aluminum cylinder heads * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners CAM SPECS: * Cam Type: Roller * .495 Intake .502 Exhaust * 220 Intake / 224 Exhaust duration * At .050, 114 degree lobe separation angle IGNITION TIMING: * 32-34 degrees total at 3500 rpm ALSO INCLUDES: * Premium Vintage valve covers * Premium Vintage air cleaner * 6.75 in. harmonic balancer * Spark plugs * Under header spark plug wires (perfect for Rams Horn exhaust manifolds) * Oil pan * Timing cover * Aluminum Intake manifold * Small cap ready-to-run distributor equipped with Tach Drive and coil * Dyno tested and shipped with results * Warranty: 30 month / 50,000 mile NOTES: * Not for use in pollution-controlled vehicles.

Not Yet Reviewed

$8,499.00

BluePrint Engines 350 C.I.D. Cruiser Crate Engines

BluePrint Engines 350 c.i.d. Cruiser crate engines make an excellent choice for daily drivers and cruising. These crate engines make up to 18 inches of vacuum and are designed to work with power brakes, stock torque converter, stock gearing--and run great on 87 octane fuel. Get a new engine and bring your ride to life with BluePrint Engines Cruiser crate engines.! More features, products, and specifications include: * 341 hp / 371 lbs.-ft. torque * Compression ratio: 9.2:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.020 in. intake / 1.600 in. exhaust valves * 195cc intake / 75cc exhaust runners Roller cam specifications: * 0.477 intake / 0.471 exhaust * 202 intake / 212 exhaust duration @ 0.050 in. 115-degree LSA (Lobe Separation Angle) Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Oil pan * Timing cover * Dyno tested results shipped with engine

4.56 out of 5 stars ( 9 )

$5,099.00

BluePrint Engines Pro Series Chevy 427 C.I.D. 540 HP Dressed Long Block Crate Engines

Does your car need more power? Of course it does! Install 540 hp and be the envy of the block. BluePrint Engines Pro Series 427 c.i.d. dressed long block crate engines have the muscle you need to impress. These powerhouses feature a 30-month/50,000-mile warranty and they are the perfect choice for drivable and reliable high-end performance. Additionally, these assemblies are manufactured under strict tolerances and provide outstanding, consistent results. All of the rotating assemblies are balanced within 2 grams on a computerized balancer. BluePrint Pro Series crate engines are also dyno-tested and include the dyno sheets. For high-horsepower, big displacement engines, BluePrint Pro Series Chevy 427 c.i.d. dressed crate engines are the way to go! Features include: * BluePrint Engines cast iron block * 4340 forged crankshaft * 4340 forged connecting rods * Forged pistons * 9.5:1 compression * 4.125 in. x 4.000 in. bore/stroke * Hydraulic roller camshaft * Double roller timing chain * 64cc chamber aluminum cylinder heads * 1.6 ratio rocker arms * Carburetor * Billet distributor

5.0 out of 5 stars ( 5 )

$11,199.00