Crate Engines, Short Blocks, Engine & Transmission Combos

BluePrint Engines GM 383 C.I.D. 436 HP Dressed Stroker Long Blocks with Fuel Injection

BluePrint Engines GM 383 c.i.d. 436 hp dressed stroker long block crate engines with fuel injection will provide you a great foundation to return your vehicle to the performance level you desire. They feature a new one-piece rear main BluePrint engine block with 4-bolt mains and passenger side dipstick. Inside the block is a cast crankshaft and connecting rod rotating assembly, with 10.1:1 compression hypereutectic pistons hung on the end. The full roller camshaft provides .544 intake/555 exhaust Lift with 230 intake/236 exhaust Duration at .050 with a 110 degree lobe separation. Up top is a dual-plane intake manifold with Holley Sniper fuel injection system The engines also include an oil pan, a set of valve covers, and a timing cover to finish them off.

4.9 out of 5 stars ( 10 )

$7,799.00

—

$10,399.00

BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block Crate Engines with Fuel Injection

BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block crate engines with fuel injection are offered in two models—one with new block casting, pulleys, and other extras. SPECIFICATIONS FOR BOTH MODELS INCLUDE: * HP and Torque: 390 hp / 410 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum Heads * Hydraulic Roller Cam * Cast Iron Crankshaft * Hypereutectic Pistons * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Harmonic Balancer Thermostat and Water neck Aluminum intake HEI distributor Spark plugs and wires EFI system Dyno test results shipped with engine INCLUDED ONLY ON MODEL BP3505CTFD: * Standard rotation long water pump INCLUDED ONLY ON NEW BLOCK CASTING MODEL BP3505CTFK: * Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump (does not fit Corvette)

5.0 out of 5 stars ( 1 )

$7,399.00

—

$9,399.00

BluePrint Engines 350 C.I.D. Cruiser Fully Dressed Crate Engines with Fuel Injection

Complete your perfect build with a BluePrint 350 c.i.d. Cruiser fully dressed crate engine with fuel injection. The engine makes up to 18 in. of vacuum and works with power brakes, stock torque converter, stock gearing--and runs great on 87 octane fuel, which makes it excellent for daily drivers and cruising! Three models are available; compare options and select the engine that best fits your needs. Details and specs: * 341 hp / 371 lbs.-ft. * Compression ratio: 9.0:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front / external rear engine balance Cylinder Heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake / 1.60 in. exhaust valves * 195cc intake / 75cc exhaust runners Cam specs: * .477 intake / .471 exhaust * 202 intake / 212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Oil pan * Timing cover * Aluminum intake * HEI distributor * EFI system * Dyno test results shipped with engine

5.0 out of 5 stars ( 4 )

$6,799.00

—

$9,299.00

BluePrint Engines GM 496 C.I.D. 600 HP Stroker Dressed Fuel Injected Long Block Crate Engines

Give your ride a new breath of life with BluePrint Engines GM 496 c.i.d. 600 hp stroker dressed fuel injected long block crate engines with aluminum heads. These engines crank out an incredible 600 hp and 568 ft.-lbs. of tire-shredding torque. Each engine is hand-built and balanced to provide you with a powerful mill that is sure to kick some fresh life into your project car or hot rod. Block: * Hand-picked seasoned Chevy 454 big block * Square and parallel decked * Align-honed main bearing bore * Cylinders honed to within .0002 straightness and roundness * Cylinders are sonic-tested for thickness Rotating assembly: * Forged steel crankshaft * OEM-type connecting rods with 150,000 psi rod bolts * Hypereutectic pistons * Hydraulic roller camshaft Additional features: * Aluminum cylinder heads * EFI system * Distributor * Valve covers, oil pan, and timing cover * 30-month/50,000-mile warranty

Not Yet Reviewed

$14,999.00

BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Dressed Long Block Crate Engines with Fuel Injection

BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Dressed Long Block crate engines with fuel injection are available in three models—two with complete front accessory drive systems. All engines deliver 460 hp and 479 lbs.-ft. of torque. They feature aluminum heads, hydraulic roller cam, forged crank, hypereutectic pistons, and a compression ratio of 9.85 to 1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block, 454 BBC Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Stroke, Bored .060 in. over 1-Piece Rear Main Seal Mech fuel pump provision: Yes Standard Deck * ROTATING ASSEMBLY: New BluePrint Forged Crankshaft 4.000 in. Stroke, 4.250 in. Bore OEM type 6.135 in. connecting rods with 150,000 psi bolts Hypereutectic pistons External * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 119cc chamber 2.30 in. intake/1.88 in. exhaust valves 316cc intake/124cc exhaust runners Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting Must verify header/exhaust clearance * CAM SPECS: Cam Type: Roller .501 Intake .510 Exhaust 216 Intake / 228 Exhaust duration @ .050 - 112 degree lobe separation * IGNITION TIMING: 10-16 degrees initial and total timing 32-36 degrees at 3,500 rpm * ALSO INCLUDES: Intake Manifold single plane, satin aluminum Holley Sniper 2 EFI System Pro Billet Distributor Harmonic balancer Valve covers, oil pan and timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty * NOTES: This engine is an excellent cruiser and daily driver engine. This engine makes up to 15 in. of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Features External 42.5 oz. imbalance. Recommend GM flywheel 14096987, or TCI flexplate 399973. -- INCLUDED ONLY ON MODEL BP454CTFKB: * Installed black complete front accessory drive system with A/C, P/S, WP, all belts and pulleys. -- INCLUDED ONLY ON MODEL BP454CTFK: * Installed polished complete front accessory drive system with A/C, P/S, WP, all belts and pulleys.

Not Yet Reviewed

$11,399.00

—

$13,399.00

BluePrint Builder Series LS376/530HP Standard Edition EFI Crate Engine and 4L65/70E Trans Combos

BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a black pulley kit and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plugs and wires * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * Champion 3015 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.

Not Yet Reviewed

$23,499.00

BluePrint Builder Series LS376/510HP Standard Edition EFI Crate Engine and TKX Transmission Combos

BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 510 horsepower, this standard edition builder series includes a polished pulley kit and T56 manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this engine assembly produces 440 lbs.-ft. of torque. When you need or want a new powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and TKX trans combos. Product description and specifications: Block: * High strength cast iron (LSX Style) block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0662 in. Bore * 6-bolt main Rotating Assembly: * Nodular iron crankshaft * 3.622 in. stroke * 6.098 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internally balanced front and rear Cylinder Heads: * BluePrint LS3 aluminum cylinder heads * 69cc chamber * 2.165 in. intake/1.590 in. exhaust valves * 259cc intake/102cc exhaust runners Cam Specs: * Hydraulic Roller Cam * 0.612 Intake/0.585 Exhaust Lift * 225 Intake/238 Exhaust duration * @.050-113 Degree Lobe Separation Ignition Timing: * Ignition Timing and Spark Advance are Controlled by BluePrint Engine Calibrated ECU * Transmission Controller Required if pairing to an automatic (ECU Does Not Offer Transmission Control) Other parts: * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS Swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and Fuel Rail Kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Notes: This engine requires a non-weighted flex plate such as (BPP12654640) / flywheel (BPPLS1611). Recommended fuel: 91 Octane. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The BluePrint Engines LS controller package contains a fully tested, calibrated, locked ECU, optimized for this specific engine. This package has undergone extensive testing for performance, reliability and the safety of you and your engine.

Not Yet Reviewed

$21,899.00

Summit Bucks

Ford Performance Parts 2024 Gen 4 5.0L 480 HP Coyote Long Block Crate Engines

Ford Performance Parts 2024 Gen 4 5.0L 480 hp Coyote engines are the latest all-aluminum crate engines from the 2024 Mustang GT. These modern 5.0L 32-valve DOHC V8s use advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow cylinder heads, dual throttle bodies, and a heightened compression ratio to deliver 480 hp and 415 lb.-ft. of torque (with premium fuel). These lightweight plasma-transferred wire-arc spray aluminum cylinder blocks feature cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, and an optimized oil drain back and windage control to improve high-rpm performance. Available with production flexplate (automatic) or dual mass flywheel (manual) and both include engine harness. Engine specs: * 480 hp at 7,150 rpm * 415 lb.-ft. of torque at 4,900 rpm * 12.0:1 compression ratio * Bore 93mm x stroke 92.7mm * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on BOSS 302 Mustang * Forged steel crankshaft * Aluminum block with plasma transferred wire arc spray weld liner coating * Longer, 12mm head bolts for higher clamp load * 9.5 qt capacity steel oil pan * Tuned composite intake manifold provides efficient air delivery and weight savings * Twin 80mm single bore drive-by-wire, electronic throttle bodies with variable runner control * High-flow aluminum cylinder heads, dual overhead camshaft (DOHC), four valves per cylinder, variable intake and exhaust camshaft timing * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * Mustang GT 409 stainless steel tubular exhaust manifold on the RIGHT SIDE ONLY

5.0 out of 5 stars ( 1 )

$11,051.99

—

$11,701.99

BluePrint Builder Series LS427/585HP Standard Edition EFI Crate Engine and T56 Transmission Combos

The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a polished (or black) pulley kit and T56 manual transmission. The BluePrint aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged steel crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 trans combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged steel crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.

Not Yet Reviewed

$26,499.00

Summit Bucks

Ford Performance Parts 5.0L Coyote Gen 4 Aluminator SC Crate Engines

Built for high performance applications, the Ford Performance 5.0L Coyote Gen 4 Aluminator SC crate engines are a powerhouse—ideal for custom race builds and 2024 GT Mustangs. While the Aluminator block, cylinder heads, oil pan, and intake manifold are factory pieces, Ford Performance replaces the hypereutectic pistons and sintered-steel rods with Mahle forged slugs, ARP 2000 rod bolts, and Manley forged H-beam rods, keeping the factory 12.0:1 compression ratio in naturally aspirated form and 9.5:1 on its boost-ready Aluminator crate. These flagship crates are quite popular with Ford diehards in the custom car and street rod world—because who really wants to put a Chevy LS in a deuce coupe? Crate engine features and specs: * Fits 2024+ Mustang GT * 5.0L (302 cubic inches) * 9.5:1 compression ratio (nominal) * Mahle hard anodized forged pistons with Grafal low friction coating * Manley H-beam connecting rods with ARP 2000 bolts * Forged steel crankshaft * Uses production 2024 Mustang GT aluminum block * 2024+ Production oil pan * Tuned composite Mustang GT intake manifold with production dual drive-by-wire 80mm throttle bodies with variable runner control * Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction. * Mustang GT production camshafts * Includes Ford Performance colder, heat range zero spark plugs (M-12405-M50A) * Includes Ford Performance oil filter (M-6731-FL820) * Includes billet steel gerotor oil pump gears (M-6600-M50A) * Vehicle harness and PCM not included * Does not include alternator (for alternator kit: refer to part numbers M-8600-M50BALT or M-8600-M50ALTA) * Engine mount bosses and bell housing mount pattern common to 4.6L modular engines * Does not include exhaust manifolds

Not Yet Reviewed

$14,414.99

BluePrint Builder Series 427W/541HP Cobra Edition EFI Crate Engine and TKX Transmission Combos

BluePrint Cobra Edition Builder Series combos pair engine and transmission, eliminating guesswork, making it easier to gain the performance you desire. These combos match a fuel injected Ford small block-compatible 427 c.i.d. engine with a TKX manual transmission enabling the production of 541 hp and 519 lb.-ft. of torque with a compression ratio of 10:1. BluePrint high-strength cast iron engine block: * 4.125 in. bore * 4-bolt main * One-piece rear main seal * 9.500 deck height Rotating assembly: * Forged crankshaft * Stroke: 4.000 in. * Forged 6.250 in. connecting rods * Forged pistons * Internally balanced Aluminum cylinder heads: * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 205cc intake/70cc exhaust runners Hydraulic roller camshaft: * .608 in. intake/.608 in. exhaust valve lift * 248 intake/258 exhaust duration at .050 in. of lift * 114 degrees lobe separation angle (LSA) TKX transmission package: * Mcleod Super Street Pro single disc clutch * Hydraulic throwout bearing * Steel bellhousing * Billet flywheel * Starter -- First gear ratio: 2.87:1 -- Second gear ratio: 1.89:1 -- Third gear ratio: 1.28:1 -- Fourth gear ratio: 1.00:1 -- Fifth gear ratio: 0.81:1 Also included: * Ribbed Cobra-style aluminum valve covers * Holley Sniper 2 EFI system * Aluminum oval air cleaner with Cobra Script * Harmonic balancer * Thermostat and thermostat housing * EFI fuel pump kit * Timing cover * Oil filter * Powdercoated oil pan * Spark plugs and wires * Plug wire separators * Polished front accessory drive: -- Driver side standard rotation water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut air conditioning compressor

Not Yet Reviewed

$28,499.00

BluePrint Engines GM 400 C.I.D. 500 HP Deluxe Dressed MPFI Long Block Crate Engines

BluePrint Engines 400 SBC-compatible performance crate engines are dyno tested with guaranteed power levels of 500 hp and 500 lb.-ft. of torque with a compression ratio of 10.3:1. These deluxe dressed, multi-port fuel injection systems, complete with ECU and full wiring harness, are specifically tuned and optimized engines that will perform well beyond most self-learn EFI systems available today. Designed for hassle-free start up and operation, they are available with or without a polished or black finish pulley kit. Select the 400 SBC-compatible performance crate engine desired for your build. Specs and features: * BluePrint Engines high-strength cast iron block -- Drilled and tapped for clutch linkage -- One-piece rear main seal -- 4-bolt main -- 4.125 in. bore * Rotating assembly: -- BluePrint forged crankshaft -- 3.750 in. stroke -- 5.700 in. connecting rods -- BluePrint forged pistons -- Internally balanced front, externally balanced rear * BluePrint Performance aluminum cylinder heads: -- 64cc chamber -- 2.08 in. intake/1.600 in. exhaust valves -- 220cc intake/65cc exhaust runners * BluePrint hydraulic roller camshaft: -- .553 intake/.576 exhaust lift -- 236 intake/242 exhaust duration at .050 -- 110-degree lobe separation * Ignition timing: -- Computer controlled by BluePrint ECU * Additional components: -- BluePrint multi-port fuel injection--self-learning electronic control unit -- Single plane machined aluminum intake manifold -- Polished chrome "BluePrint" engraved valve covers -- Polished chrome BluePrint air cleaner -- Satin aluminum water pump -- Spark plugs and wires -- Harmonic balancer -- Timing cover -- Distributor -- Oil pan * Polished or black front accessory drive (depending on kit selected): -- Reverse rotation short water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut-style air conditioning compressor

Not Yet Reviewed

$11,699.00

BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block Crate Engines

BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block crate engines are available with fuel injection—and base or deluxe carbureted models. SPECIFICATIONS FOR ALL MODELS INCLUDE: * HP and Torque: 390 hp / 410 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum Heads * Hydraulic Roller Cam * Cast Iron Crankshaft * Hypereutectic Pistons * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Aluminum intake HEI distributor Dyno test results shipped with engine 30 month / 50,000 warranty INCLUDED ONLY WITH FUEL INJECTION MODEL BP3505CTF: * EFI system INCLUDED ONLY WITH BASE CARBURETED MODEL BP3505CTC: * 670 cfm carburetor INCLUDED ONLY WITH DELUXE CARBURETED MODEL BP3505CTCD: * Harmonic balancer * Spark plugs * Spark plug wires * Standard Rotation Long Style Water Pump * Waterneck and Thermostat * Fuel Pump * 670 cfm carburetor

4.82 out of 5 stars ( 11 )

$5,899.00

—

$6,999.00

Summit Bucks

Ford Performance Parts Megazilla Crate Engines

The Ford Performance Parts engine team has unleased the 7.3L Megazilla crate engine! The Megazilla features the Ford Performance 7.3L intake manifold, CNC-ported cylinder heads, forged pistons and connecting rods. The Megazilla crate engine cranks out 612 hp and 670 lbs.-ft. of torque in a streetable package running on premium pump gas. Megazilla crate engine features: * 7.3L displacement * 10.5:1 compression * (M-6049-SD73P/M-6050-SD73P) CNC-ported aluminum cylinder heads * (M-9424-73LP) low-profile intake manifold * (M-9926-M5292) 92mm throttle body * Mahle forged pistons * Callies H-beam forged connecting rods * (M-6303-SD73) production steel crankshaft * (M-6250-SD73A) hi-performance 7.3L camshaft w/ VCT delete * (M-6010-SD73) production cast iron block Peak power output (J607 standard): * 612 hp @ 5,580RPM * 670 lbs.-ft. of torque @ 3,920RPM * Over 500 lbs.-ft. of torque from 2,500 rpm to 6,000 rpm Assembly includes: * Coils/plug wires/spark plugs * Production oil pan * (M-6038-73) shipping/storage cradle * Production engine wiring harness Additional information: * Bellhousing bolt pattern same as the Ford 4.6/5.4 and Coyote 5.0L * For control packs, please refer to part number: M-6017-73M and M-6017-73A (sold separately) * Custom calibration required * For starter, please refer to part number: M-11000-SD73 (sold separately) * For FEAD, please refer to part number: M-8600-SD73 and M-8600-SD73AC (sold separately) This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways is likely to violate U.S. and Canadian laws and regulations relating to motor vehicle emissions.

Not Yet Reviewed

$22,097.99

BluePrint Engines Ford 302 C.I.D. 370 HP Dressed Long Block Crate Engines

BluePrint Engines Ford 302 c.i.d. 370 hp dressed long block crate engines feature hand-picked seasoned blocks, align-honed main bearing bore, and cylinders honed on computer-controlled machines to within .0002 straightness/roundness—and sonic tested for thickness. Key features: * 2-bolt main * 1-piece rear main seal * Mechanical fuel pump provision * Upgraded 5.090 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * BluePrint aluminum cylinder heads with 60cc chambers * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners * Hydraulic roller camshaft: .543 intake/.554 exhaust lift, 218/226 duration at .050 with 112-degree lobe separation * Timing: 10-16 degrees initial, 32-34 total * 600cfm carburetor or Sniper EFI system * Dual plane, satin aluminum intake manifold * Distributor * Valve covers * Timing cover * 50 oz. 6.4 in. diameter harmonic balancer * Dyno test results shipped with engine * Painted Ford blue

Not Yet Reviewed

$8,451.43

BluePrint Engines 350 C.I.D. Cruiser Fully Dressed Crate Engines

BluePrint Engines 350 c.i.d. Cruiser fully dressed crate engines make an great choice for daily drivers and cruising. These fully dressed engines make up to 18 in. of vacuum and work excellent with power brakes, stock torque converter and stock gearing and they will run on 87 octane fuel. Details and specs: * 341 hp/371 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating Assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder Heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners Roller Cam specs: * .477 intake/.471 exhaust * 202 intake/212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Harmonic balancer * Spark plugs * Spark plug wires * Standard rotation long style water pump * Waterneck and thermostat * Fuel pump * Oil pan * Timing cover * Aluminum intake * HEI distributor * 600 cfm carburetor * Dyno test results shipped with engine

4.28 out of 5 stars ( 29 )

$6,199.00

—

$8,199.00

BluePrint Engines 350 C.I.D. Cruiser Crate Engines

BluePrint Engines 350 c.i.d. Cruiser crate engines make an excellent choice for daily drivers and cruising. These crate engines make up to 18 inches of vacuum and are designed to work with power brakes, stock torque converter, stock gearing--and run great on 87 octane fuel. Get a new engine and bring your ride to life with BluePrint Engines Cruiser crate engines.! More features, products, and specifications include: * 341 hp / 371 lbs.-ft. torque * Compression ratio: 9.2:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.020 in. intake / 1.600 in. exhaust valves * 195cc intake / 75cc exhaust runners Roller cam specifications: * 0.477 intake / 0.471 exhaust * 202 intake / 212 exhaust duration @ 0.050 in. 115-degree LSA (Lobe Separation Angle) Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Oil pan * Timing cover * Dyno tested results shipped with engine

4.56 out of 5 stars ( 9 )

$5,099.00

BluePrint Engines Ford 302 C.I.D. 361 HP Dressed Long Block Crate Engines

BluePrint Engines Ford 302 c.i.d. 361 HP dressed long block crate engines are ideal for daily drivers and cruising. Fully dressed, these engines makes up to 16 in. of vacuum and will work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression Ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * 3.000 in. stroke * OEM type 5.090 in connecting rods * Hypereutectic pistons * 50oz external balance Cylinder Heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial, 32-34 total Also includes (depending on part number): * Valve covers * Timing cover * Carburetor or Throttle Body * Spark plugs and wires * Distributor * Intake * Harmonic balancer * Dyno test results shipped with engine Note: Engine requires a V-belt standard rotation water pump and belt system. Timing cover is designed for standard rotation water pump only.

4.58 out of 5 stars ( 12 )

$6,899.00

—

$9,399.00

ATK High Performance GM 350 Vortec 290 HP Stage 3 Long Block Crate Engines

ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires

3.78 out of 5 stars ( 9 )

$3,625.99

BluePrint Engines Pro Series Chevy LS 376 C.I.D. 530 HP EFI Base Dressed Long Block Crate Engines

BluePrint Engines provides a Dyno Promise with results and bragging rights. They make sure they hit their target horsepower and proper torque with every crate engine, utilizing an advanced computerized balancer to get rotating assemblies within 2 grams, ensuring silky smooth power over the entire rpm range. According to BluePrint, that's precisely why their engines sound and run better than the competitors. Accompanying your BluePrint Engines Pro Series Chevy LS 376 c.i.d. 530 hp EFI base dressed long block crate engine will be a comprehensive, dyno-generated printout showing its critical specs. No more guessing what the real-world peak horsepower and torque ratings are. Any doubters in the crowd? Simply flash them your dyno results! These long block engines are available with or without complete engine controller with ECU, harness, throttle pedal, and sensors. Select the one you want. BluePrint Engines Pro Series Chevy LS EFI base dressed engine: * Horsepower and torque: 530hp/495 lb.-ft. * Compression ratio: 10.7:1 * BluePrint Engines LS3 aluminum cylinder heads -- 69cc chamber -- 2.165 in. intake/1.590 in. exhaust valves -- 259cc intake/102cc exhaust runners * Hydraulic roller camshaft: -- .612 intake/.585 exhaust lift -- 225 intake/238 exhaust duration at .050 in. -- 113-degree lobe separation angle -- 3-bolt cam * Nodular iron crankshaft -- 3.622 in. stroke -- 6.125 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * BluePrint Engines high-strength cast iron 6.2L block -- Increased deck thickness and strength webbing -- Extended cylinder skirt -- Priority main oiling -- 4.0662 in. bore -- 6-bolt main -- 1-piece rear main seal -- Improved water jacket design -- Utilizes OEM LS3 front and rear covers * LS swap oil pan * Harmonic balancer (Short Corvette style) * DBW throttle body * Available with a GM plastic or fabricated intake manifold * Fuel injectors and rail * Coil packs * Spark plugs and wires * Water pump

4.2 out of 5 stars ( 5 )

$10,199.00

—

$14,199.00

BluePrint Engines GM 350 C.I.D. 390 HP Long Block Crate Engines

BluePrint Engines GM 350 C.I.D. 390 HP Long Block crate engines deliver 390 hp and 410 lbs.-ft. of torque. They feature aluminum heads, hydraulic roller cam, cast iron crankshaft, hypereutectic pistons, and a compression ratio of 9.2:1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty

4.21 out of 5 stars ( 14 )

$5,299.00

BluePrint Engines Chrysler 408 C.I.D. 465 HP Long Block Crate Engines

BluePrint Engines Chrysler 408 c.i.d. 465 hp crate engines sound and run better. BluePrint Engines use an advanced computerized balancer to get their rotating assemblies within 2 grams, ensuring silky smooth power over the entire rpm range. They also include a comprehensive, dyno-generated printout showing the critical specs. No more guessing what your installed engine's real-world peak horsepower and torque ratings are. Any doubters in the crowd? Simply flash them your Blueprint Engines' 408 c.i.d. stroker crate engine dyno results! Features, items, and specs: * Available in 3 levels of dress: Long block base, fully dressed, and drop-in-ready * Long block base model includes oil pan, timing cover, and valve covers * Fully dressed model includes long block components, plus carburetor, intake manifold, distributor, and harmonic balancer installed * Drop-in-ready model includes fully dressed components, plus water pump, air cleaner, spark plugs, and spark plug wires * Aluminum cylinder heads: 58cc chamber; 2.02 in. intake/1.60 in. exhaust valves; 176cc intake/75cc exhaust runners * Roller cam: .544 intake; .541 exhaust; 236 intake/242 exhaust duration at .050--110 degree lobe separation * Cast steel crankshaft: 4.000 in stroke; OEM-type 6.123 in. connecting rods with 150,000 psi bolts; forged pistons; external balance * Hand-picked, seasoned block: Square and parallel decked with precision-machined and sonic-tested cylinders, 2-bolt main, 4.000 in bored and .040 in. over, 2-piece rear main seal, and mechanical pump provision * 34 degrees total at 4,000 rpm ignition timing * Brass freeze plugs * Recommended fuel: 91 octane

5.0 out of 5 stars ( 1 )

$8,899.00

—

$9,999.00

ATK High Performance GM 350 Vortec 350 HP Stage 2 Long Block Crate Engines

Give your car or truck a little more punch with one of these ATK High Performance GM 350 Vortec 350 hp Stage 2 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure they are great-running, reliable engines that will get you back on the road. Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 *Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump Recommended components: * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers

4.0 out of 5 stars ( 9 )

$3,688.99

ATK High Performance Chevy LQ4 6.0L 460 HP Long Block Crate Engines

ATK High Performance Chevy LQ4 6.0L 460 hp long block crate engines lay down impressive power that can be run with factory fuel injection or retrofitted with a carburetor. They're hand-built, balanced, and blueprinted using top-quality parts. Don't waste time trying to salvage a high-mileage short block when you can get a fresh mill that's ready for your choice of components to make it your own. ATK Chevy LQ4 6.0L 460 hp long block crate engines include: * Handpicked and seasoned 6-bolt main block * Aligned and honed main bores * OE steel crankshaft * 3.622 in. stroke * OE connecting rods * Hypereutectic dish top pistons * Aluminum cylinder heads * Hydraulic roller camshaft * Timing chain and gear set * 1.7:1 ratio rocker arms * 24-tooth reluctor

4.4 out of 5 stars ( 10 )

$5,049.99