Availability
The hot new small block V8 in the GM lineup is the hyper-aggressive LS3 6.2L 376 c.i.d. 495 hp engine assembly from Chevrolet Performance. It offers a high-revving 376 c.i.d. combination that represents generations of small block V8 development and engineering. Not only is the LS3 an amazing engine in its stock configuration, but with those high-flowing rectangular port cylinder heads, the LS3 is loaded with potential. To tap into this, the engineers at GM Performance Parts offer you the LS376/480—an LS3 with an upgraded camshaft that boosts power by a whopping 50 hp! The LS376/480 comes with the same great features as the LS3 crate engine. The bottom-end includes a 6-bolt aluminum block, nodular crank, high performance rods, and 10.7:1 pistons. The heads are high-flowing rectangular-port L92 units that have been upgraded with high-revving, hollow-stem valves. The same EFI intake manifold feeds the hungry engine, while 1.7:1 roller rockers work with the upgraded camshaft. The GM Performance Parts engineers picked the LS Hot Cam (P/N 88958733) to take the LS3 to the next level. This cam specs out with .525 in. intake and exhaust valve lift. Duration (at .050 in.) is 219 degrees intake and 228 degrees exhaust, which allows for a dramatic increase in power. The engine will idle and cruise just like an LS3, but the power increase is there whenever you need it. A 14 in. automatic flexplate is included. Specifications: * Engine type: LS Series Gen IV small block V8 * 495 hp at 6,200 rpm, 473 lbs.-ft. torque at 5,000 rpm * Displacement: 376 cubic inch (6.2L) * Bore x Stroke (in.): 4.06 x 3.62 (103.25 x 92mm) * Block: Cast-aluminum with 6-bolt, cross-bolted main caps * Crankshaft: Nodular iron * Connecting rods: Powdered metal * Pistons: Hypereutectic aluminum * Camshaft type: Hydraulic roller * Valve lift: .525 in. intake / .525 in. exhaust * Camshaft duration (at .050 in): 219 degrees intake / 228 degrees exhaust * Cylinder heads: Aluminum L92 style port; as cast with 68cc chambers * Valve size: 2.165 int / 1.59 exhaust * Compression ratio: 10.7:1 * Rocker arms: Investment-cast, roller trunnion * Rocker arm ratio: 1.7:1 * Recommended fuel: 92 octane * Maximum recommended RPM: 6600 * Reluctor wheel: 58X * Balanced: Internal
( 2 )
$10,868.33
BluePrint Engines Ford 302 c.i.d. 361 HP dressed long block crate engines are ideal for daily drivers and cruising. Fully dressed, these engines makes up to 16 in. of vacuum and will work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression Ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * 3.000 in. stroke * OEM type 5.090 in connecting rods * Hypereutectic pistons * 50oz external balance Cylinder Heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial, 32-34 total Also includes (depending on part number): * Valve covers * Timing cover * Carburetor or Throttle Body * Spark plugs and wires * Distributor * Intake * Harmonic balancer * Dyno test results shipped with engine Note: Engine requires a V-belt standard rotation water pump and belt system. Timing cover is designed for standard rotation water pump only.
( 9 )
$6,649.00
—
$10,199.00
ATK High Performance GM 350 345 hp/400 lbs.-ft. Stage 1 long block crate engines are classics with great street manners, and vacuum to power all your accessories. These Stage 1 or base engines are designed for those that may have their own component parts already, and who also are interested in completing out the build themselves. Typically ATK GM 350 345 hp base long block engines consist of: * Seasoned OE short block with 4-bolt mains * OE cast crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic pistons * Moly piston rings * Hydraulic roller camshaft * 220/224 at .050 in. * .495 in./502 in. lift 110 LSA * ATK cast iron cylinder heads * 76cc combustion chambers * 165cc intake runners * 1.94 in./1.5 in. valves * Stamped steel 1.5 ratio rocker arms * Valve covers * Timing set and cover * Oil pan, high volume oil pump with pick-up tube
( 12 )
$3,198.99
BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Long Block crate engines deliver 460 hp and 479 lbs.-ft. of torque. They feature aluminum heads, hydraulic roller cam, cast crank, hypereutectic pistons, and a compression ratio of 9.85 to 1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block, 454 BBC Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Stroke, Bored .060 in. over 1-Piece Rear Main Seal Mech fuel pump provision: Yes Standard Deck * ROTATING ASSEMBLY: New BluePrint CastCrankshaft 4.000 in. Stroke, 4.250 in. Bore OEM type 6.135 in. connecting rods with 150,000 psi bolts Hypereutectic pistons External * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 119cc chamber 2.30 in. intake/1.88 in. exhaust valves 316cc intake/124cc exhaust runners Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting Must verify header/exhaust clearance * CAM SPECS: Cam Type: Roller .501 Intake .510 Exhaust 216 Intake / 228 Exhaust duration @ .050 - 112 degree lobe separation * IGNITION TIMING: 10-16 degrees and total timing 32-36 degrees at 3,500 rpm * ALSO INCLUDES: Valve covers, oil pan and timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty
( 1 )
$9,099.00
BluePrint Engines 302 c.i.d. Cruiser base crate engines make an excellent choice for daily drivers and cruising. These crate engines make up to 16 inches of vacuum and are designed to work great with power brakes, stock torque converter, stock gearing, and run great on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * Cast iron crankshaft * 3.00 in. stroke * OEM 5.090 in. connecting rods * Hypereutectic pistons * 50oz external engine balance Cylinder heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial with 32-34 degrees total Also includes: * Valve covers * Oil pan * Timing cover * Dyno tested results shipped with engine
Not Yet Reviewed
$6,049.00
Give your old ride new life with these ATK High Performance GM 350 345 hp/400 lbs.-ft. Stage 3 long block crate engines. These engines are built to perform and look great without breaking your budget. Each engine is expertly assembled, balanced, blueprinted, and topped with quality components, making it a solid, reliable mill to power your muscle car, street rod, or pickup. ATK GM 350 345 hp Stage 3 long block crate engines include: * Handpicked, OE remanufactured block * ATK cast iron 75cc/165cc 1.94/1.50 heads * ATK dual plane intake manifold * Quick Fuel 680 cfm vacuum secondary carburetor * OE crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic pistons * Hydraulic roller camshaft .495in/.502ex 110LSA * HEI Distributor, plug wires and plugs * Holley 110 GPH mechanical fuel pump * Valve covers * Timing cover and double roller timing set * 5 qt. oil pan, high volume oil pump with pickup tube * OE style long water pump * PowerBond 8 in. balancer and 168 tooth flexplate
( 1 )
$4,504.99
You're track-ready with extreme performance GM LSX376 crate engines. At home on the street and on the strip, these value-driven Chevrolet Performance crate engines offer lower-compression forged aluminum pistons, a tough bottom end, and high-flow heads. LSX376 engines make a perfect foundation for supercharging, turbocharging, and nitrous--all you need to do is supply the boost! Does your muscle deserve the LSX touch? Yes! Get the strength and power to build a winner with these features: * Race-bred LSX Bowtie block * High-flow LS3 cylinder heads * Blower-friendly 9.0:1 forged pistons * 14 in. automatic transmission flexplate * Unique LSX376 valve covers
Not Yet Reviewed
$13,568.04
Chevrolet Performance 5.7L 350 C.I.D L05 Gen I 210 HP truck crate engines deliver performance and value. These long blocks start with a precisely CNC-machined 4-bolt main block, graphite coated hypereutectic pistons, and a flat-tappet hydraulic camshaft. Then they're topped with cast iron cylinder heads designed to be extremely durable while still providing good airflow through the engine. All Chevrolet Performance 350 L05 crate engines comply with an 18-step quality process, then get torque-to-turn, compression, and oil pressure-tested at the end of the line. More product features, items, and specs include: * Roller camshaft ready * Mechanical fuel pump capable * Cylinders honed on a computer-controlled machine * Forged steel crankshaft * One-piece rear seal * Powdered metal connecting rods * Silent link-type timing chain * New valve covers, oil pan, timing cover, and harmonic balancer for fewer labor hours at your installer * 210 hp at 4,000 rpm * 300 lbs.-ft. torque at 2,800 rpm * 9.4 to 1 compression ratio * Camshaft with 165/174 duration at 0.050, 0.382 In./0.402 ex. lift * 1.94 in. intake/1.50 in. exhaust valves * Center bolt cylinder heads (65.3cc chambers)
( 1 )
$5,749.99
BluePrint Engines Fuel Injected Ford 408 c.i.d. Stroker engines are complete long block dressed engine assemblies with EFI. They deliver 450 hp and 470 lbs.-ft. of torque. The engines feature a compression ratio of 9.8:1, aluminum heads, hydraulic roller cam, cast steel crankshaft, and forged pistons. Here are additional specifications: BLOCK: * Hand-picked seasoned block * Square and parallel decked * Line honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 straightness and roundness * Cylinders are sonic tested for thickness * 2-Bolt Main * 4.000 in. Bored * One-Piece Rear Main Seal * Mech fuel pump provision: Not applicable on "CTF" models ROTATING ASSEMBLY: * New cast steel crankshaft * 4.000 in. stroke * Forged I-Beam 6.200 in. connecting rods * Forged pistons * External 28 oz. balance front and rear CYLINDER HEADS: * BluePrint Aluminum Cylinder Heads * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 90cc intake/65cc exhaust runners CAM SPECS: * Roller * .579 Intake / .579 Exhaust * 236 Intake / 248 Exhaust duration at .050 - 114 degree lobe separation IGNITION TIMING: * 34 degrees total at 3500 rpm ALSO INCLUDES: * Intake manifold * Distributor * EFI system * Oil pan, timing cover and valve covers * Dyno tested and shipped with results WARRANTY: * 30 month / 50,000 mile NOTES: * Not for use in pollution controlled vehicles. * Does not include fuel pump. * Holley Sniper EFI is NOT compatible with AOD trans. It does NOT have AOD kickdown lever.
Not Yet Reviewed
$9,499.00
By combining the large-displacement and heavy-duty elements of the L8T 6.6L engine and a unique camshaft based off the Corvette Stingray's high-revving LT2 V-8, Chevrolet Performance engineers have created the all-new L8P 400 c.i.d. Performance crate engine. Rated at 523 hp and 543 lbs.-ft. of torque, it offers your project a unique and naturally aspirated combination of big-displacement torque and high-rpm horsepower. The L8T 6.6L foundation is the same high-strength, big-displacement engine found in the Silverado HD from 2020 to present day, featuring a forged steel crankshaft and high-strength components. Additional features such as oil-spray cooling for the pistons and a cast iron, long-skirt cylinder block with 6-bolt, cross-bolted main caps contribute to the engine's strength and durability. The new L8P builds on that with a unique, upgraded valvetrain featuring performance-oriented valves and springs, along with a unique camshaft that is based off the Corvette Stingray's LT2 engine. It has a non-active fuel management profile and more duration than the L8t's camshaft. It's the best of both engines: the largest displacement in the LT family and the power-building attributes of the Corvette camshaft. Put it to work in your project. Fast Facts: * Displacement: 400 cu. in. (6.6L) * Bore x Stroke: 4.06 in. x 3.86 in. * Crankshaft: Forged steel * Pistons: Hypereutectic aluminum * Compression ratio: 10.8:1 * Cylinder heads: Rectangular port D/I with 59.02cc chambers * Camshaft type: Billet steel hydraulic roller * Camshaft duration: 218 degree intake/231 degree exhaust at .050 in. * Fuel delivery: Direct injection with high-pressure pump * Horsepower: 523 at 5,800 rpm * Torque (lbs.-ft.): 543 at 4,800 rpm * Engine type: Gen V small block V-8 direct injection spark ignition * Block: Cast iron with 6-bolt no Dula main bearing caps * Connecting rods: Forged powder-metal * Valve lift (in.): 0.549 intake / 0.549 exhaust * Rocker arms: Investment cast roller trunnion * Rocker arm ratio: 1.8:1 * Intake manifold: Composite * Throttle body: 87mm diameter (single-bore) * Fuel delivery: High-pressure direct injection (2,175 psi / 150 bar) * Recommended fuel: Premium pump * Ignition system: Coil-on-plug * Maximum recommended RPM: 6,000 rpm * Reluctor wheel: 58X * Balanced: Internal * Note: Use with the new engine control kit, P/N 19435524, which includes a programmed controller, wire harness, pedal, oxygen sensors and mounts, MAD, fuel line pressure sensor and fuel pump power module. Flexplate P/N 12685003 must be purchased for these engines to be compatible with the 10-speed supermatic transmission. 10-speed supermatic transmission uses six bolts to attach the torque converter.
Not Yet Reviewed
$8,948.80
ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LM7 5.3L 500 hp base long block crate engine is fitted with AFR heads. Engine specifications: * Horsepower: 500 * Torque: 440 * Block: OE LM7/5.3L iron * Bore/stroke: up to 3.903 in. x 3.622 in. * Displacement (cu.in): up to 347c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- AFR CNC ported aluminum -- 59cc/200cc -- 2.000 in. intake/1.570 in. exhaust * Rocker arms: OE 1.7 ratio with trunnion upgrade * Oil pump: Melling M295
Not Yet Reviewed
$5,199.99
—
$5,556.99
ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LM7 5.3L 500 hp long block crate engine is fitted with AFR heads and FiTech EFI. Engine specifications: * Horsepower: 500 * Torque: 440 * Block: OE LM7/5.3L iron * Bore/stroke: up to 3.903 in. x 3.622 in. * Displacement (cu.in): up to 347c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- AFR CNC ported aluminum -- 59cc/200cc -- 2.000 in. intake/1.570 in. exhaust * Rocker arms: OE 1.7 ratio * Oil pump: Melling M295 * EFI System: -- FiTech Ultra port injection LS1 750 hp with transmission control -- Wiring harness and ECM/TCM included * Fuel injectors: FiTech 55 lb. * Spark plugs: Autolite #104 * Spark plug wires: 8mm * Balancer: Stock internally balanced
Not Yet Reviewed
$8,899.99
LS Classic Series '57 Fuelie crate engines come with the complete line of LS Classic Series components pre-installed and ready to drop-in your classic ride. These crate engines start with a brand new, GM 495 hp "Hot Cam" LS3 right out of the box. They are then painted orange, or left natural, and are assembled with an LS Classic Series vintage inspired 1957 Fuelie style intake kit, billet aluminum valley pan, and small block style valve covers of your choice. These packages include a Holley Terminator engine management system and wiring harness with a GM electronic transmission controller. Once completely assembled, the Holley ECU is loaded with a start-up tune and the engines are run to check for leaks and oil pressure. Pricing varies depending on the engine's options. Specifications include: * Compression ratio of 10.7:1 * Recommended fuel is 92 octane * Cast aluminum block with 6-bolt cross-bolted main caps * Nodular iron crankshaft * Powdered metal connecting rods * Hypereutectic aluminum pistons * Steel hydraulic roller tappet camshaft * Valve lift of 0.525 in. for intake and exhaust * Duration at 0.050 in. is 219 degrees intake and 228 degrees exhaust * Lobe separation angle is 112 degrees * Combustion chamber volume is 68cc * Valve diameter is 2.165 in. for the intake and 1.590 in. for exhaust * Cast roller trunnion rocker arms with a 1.7:1 ratio * Internally balanced * 58x Gen IV reluctor wheel * Maximum recommended rpm is 6,600 * Recommended torque converter stall is 2,400-2,800 Engines include: * Fully assembled long block * Holley Terminator engine management system with O2 sensor and transmission control * LS Classic Series '57 Fuelie intake manifold system with GM throttle body and injectors * Oil pump, pick-up and Camaro style oil pan * Billet aluminum valley plate with oil fill tube and breather cap * Intake manifold, fuel injectors and throttle body * Harmonic balancer * Front timing cover * Oil filter and passenger side oil dipstick and tube * High-performance rear dump exhaust manifolds * 14.000 in. automatic transmission flexplate
Not Yet Reviewed
$27,055.95
—
$27,374.95
Chevrolet Performance LS3 6.2L 376 c.i.d. engine assemblies use an impressive 10.7:1 compression ratio to put out 525 hp at 6,200 rpm and 486 lbs.-ft. of torque at 5,200 rpm. They feature a cast aluminum block with a nodular iron crankshaft, powdered metal connecting rods, and hypereutectic pistons. The steel hydraulic roller camshaft has a .525 in. intake and .525 in. exhaust valve lift, with a 226 degree intake and 236 degree exhaust valve duration at .050 in. cam lift. Assemblies also include: * Ignition coil packs * Spark plug wires * Spark plugs * Intake manifold * Fuel injectors * Throttle body * Exhaust manifolds * 14 in. flexplate * Front timing cover * Aluminum water pump * Harmonic balancer * Passenger side right hand dipstick and tube
Not Yet Reviewed
$11,923.08
Chevrolet Performance LT1 6.2L E-Rod long block crate engines have it all. They're architecturally similar to the LS family of small block engines, but with a unique block casting, cylinder head design, oiling system, and more. LT1 engines also combine advanced technologies—including direct-injection and continuously variable valve timing to support an advanced combustion system. Offered with a wet-sump or dry-sump oiling system, the Chevy E-Rod engine systems include the specially designed engine controller for retro-fit applications and harness needed to get the engine running. Engine specs and features: * Cast aluminum with 6-bolt nodular iron main bearing caps * Direct-injection, spark-ignition Gen-V small block V8 * Horsepower: 455 at 6,000 rpm * Torque: 465 lbs.-ft. at 4,600 rpm * Crankshaft: Forged steel * Connecting rods: Forged powdered metal * Pistons: Eutectic * Camshaft type: Billet steel roller * Valve lift (in.): .561 intake/.531 exhaust * Camshaft duration (at 0.050 in.): 200 degrees intake/212 degrees exhaust * Cylinder heads: Aluminum, rectangular port D/I * Valve size (in.): 2.13 intake/1.59 exhaust * Compression ratio: 11.5:1 * Rocker arms: Investment-cast, roller trunnion * Rocker arm ratio: 1.81:1 * Recommended fuel: Premium pump * Maximum recommended rpm: 6,600 * Reluctor wheel: 58x * Balanced: Internal * Engine control module * Exhaust manifolds * Catalytic converters * Mass airflow sensor and sensor boss * Oxygen sensors and sensor bosses * Air filter * Accelerator pedal * Evaporative emissions canister * Instruction manual
Not Yet Reviewed
$12,803.20
—
$13,458.59
Give your old ride new life with these ATK High Performance GM 350 345 hp/400 lbs.-ft. Stage 2 long block crate engines. These engines are built to perform and look great without breaking your budget. Each engine is expertly assembled, balanced, blueprinted, and topped with quality components, making it a solid, reliable mill to power your muscle car, street rod, or pickup. ATK GM 350 345 hp Stage 2 long block crate engines include: * Handpicked, OE remanufactured block * ATK cast iron 75cc/165cc 1.94/1.50 cylinder heads * ATK dual plane intake manifold * OE crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic pistons * Moly rings * Hydraulic roller camshaft .495in/.502ex 110LSA * Stamped steel 1.5 ratio rocker arms * HEI distributor, plug wires and plugs * Valve covers * Timing cover and double roller timing set * 5 qt. oil pan, high volume oil pump with pickup tube * OE style long water pump * PowerBond 8 in. balancer and 168 tooth flexplate
( 2 )
$3,635.99
BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Dressed Long Block crate engines are available in three different models—two with complete front accessory drives. All models deliver 460 hp and 479 lbs.-ft of torque; and feature aluminum heads, hydraulic roller cam, forged crank, hypereutectic pistons, and a compression ratio of 9.85 to 1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block, 454 BBC Manufactured and Machined in the USA 4-Bolt Main 4.250 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Standard Deck * ROTATING ASSEMBLY: New BluePrint Forged Crankshaft 4.000 in. Stroke, 4.250 in. Bore 6.135 in. connecting rods with 150,000 psi bolts Hypereutectic pistons External * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 119cc chamber 2.30 in. intake/1.88 in. exhaust valves 316cc intake/124cc exhaust runners Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting Must verify header/exhaust clearance * CAM SPECS: Cam Type: Roller .501 Intake .510 Exhaust 216 Intake / 228 Exhaust duration @ .050 - 112 degree lobe separation * IGNITION TIMING: 10-16 degrees initial and total timing 32-36 degrees at 3,500 rpm * ALSO INCLUDES: Intake Manifold single plane, satin aluminum 750cfm Carburetor Valve covers, oil pan and timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty * NOTES: This engine is an excellent cruiser and daily driver engine. This engine makes up to 15 in. of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Features External 42.5 oz. imbalance. Recommend GM flywheel 14096987, or TCI flexplate 399973. INCLUDED ONLY WITH MODEL BP454CTCK: * Installed polished complete front accessory drive system with A/C, P/S, WP, all belts and pulleys. INCLUDED ONLY WITH MODEL BP454CTCKB: * Installed black complete front accessory drive system with A/C, P/S, WP, all belts and pulleys.
( 2 )
$9,949.00
—
$12,049.00
BluePrint Engines Ford 302 c.i.d. 361 HP EFI dressed long block crate engines are ideal for daily drivers and cruising. Fully dressed, these engines makes up to 16 in. of vacuum and will work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression Ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * 3.000 in. stroke * OEM type 5.090 in connecting rods * Hypereutectic pistons * 50oz external balance Cylinder Heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial, 32-34 total Also includes: * Front sump oil pan * Valve covers * Timing cover * EFI * Standard rotation water pump * Spark plugs and wires * Distributor * Intake * Harmonic balancer * Dyno test results shipped with engine
Not Yet Reviewed
$7,699.00
—
$10,199.00
BluePrint Engines Ford 302 c.i.d. 370 hp dressed long block crate engines feature hand-picked seasoned blocks, align-honed main bearing bore, and cylinders honed on computer-controlled machines to within .0002 straightness/roundness—and sonic tested for thickness. Key features: * 2-bolt main * 1-piece rear main seal * Mechanical fuel pump provision * Upgraded 5.090 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * BluePrint aluminum cylinder heads with 60cc chambers * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners * Hydraulic roller camshaft: .543 intake/.554 exhaust lift, 218/226 duration at .050 with 112-degree lobe separation * Timing: 10-16 degrees initial, 32-34 total * 600cfm carburetor or Sniper EFI system * Dual plane, satin aluminum intake manifold * Distributor * Valve covers * Timing cover * 50 oz. 6.4 in. diameter harmonic balancer * Dyno test results shipped with engine * Painted Ford blue
Not Yet Reviewed
$8,451.43
The most popular crate engine size just got better and easier with Ford Performance Parts X2347 Street Cruiser dressed long block crate engines. The proven 347 stroker combination has been optimized for street cruising with a perfectly matched cam/cylinder head/intake manifold/carburetor combination that runs on pump gas. Guesswork and installation issues are eliminated with a complete intake and distributor package that has been developed and tested by Ford Performance engineers. The X2347D engines are hand-assembled and dressed out with the best aftermarket performance parts translating into 360 hp and 400 lb.-ft. of torque at the crank! Ford Performance X2347 main features: * 4.030 in. bore and 3.400 in. stroke * Boss 302 8.2 in. deck height block * SCAT forged steel crankshaft * SCAT forged steel I-beam connecting rods * Forged Mahle pistons with floating wrist pins * Ford Performance aluminum, 64 cc chamber cylinder heads * 1.94 in. intake valves, 1.54 in. exhaust valves * 9.6:1 compression ratio * Edelbrock Performer RPM Air Gap manifold * Holley Street Avenger 570 cfm carburetor * 1.6:1 ratio roller rocker arms * Ford Racing black satin aluminum valve covers * MSD billet distributor * Ford Racing 9mm black spark plug wires * Hydraulic roller Comp Cams .533 in. lift intake and exhaust with 206 degree duration intake and exhaust at .050" lift * Double roller timing chain set * Ford Racing SFI-approved harmonic damper * High performance front or rear sump 7-quart capacity oil pan with windage tray and scraper * Maximum recommended rpm: 6,000 rpm * Internal balance; use neutral balance flywheel
Not Yet Reviewed
$12,555.00
—
$14,029.71
Chevrolet Performance LS3 6.2L 376 c.i.d. 430 hp long block crate engines use an impressive 10.7:1 compression ratio to put out 430 hp at 5,900 rpm and 425 lbs.-ft. of torque at 4,600 rpm. Based on the production LS3 engine, these engines use L92-style rectangular-port heads. They feature a cast aluminum engine block with a nodular iron crankshaft, powdered metal connecting rods, and hypereutectic pistons. The steel hydraulic roller camshaft has a .551 in. intake and .522 in. exhaust valve lift with 204 degrees intake and 211 degrees exhaust valve duration at .050 in. camshaft lift. Long block crate engines also include: * F-body style oil pan, pump and pickup * Harmonic balancer * Front timing cover * Oil Filter
( 5 )
$7,194.63
Chevrolet Performance LS3 6.2L 376 c.i.d. 430 hp long block crate engines use an impressive 10.7:1 compression ratio to put out 430 hp at 5,900 rpm and 425 lbs.-ft. of torque at 4,600 rpm. They feature a cast aluminum engine block with a nodular iron crankshaft, powdered metal connecting rods, and hypereutectic pistons. The steel hydraulic roller camshaft has a .551 in. intake and .522 in. exhaust valve lift with 204 degrees intake and 211 degrees exhaust valve duration at .050 in. cam lift. Long block crate engines also include: * Ignition coil packs * Spark plug wires * Spark plugs * Intake manifold * Fuel injectors * Throttle body * Front timing cover * Aluminum water pump * Harmonic balancer * Passenger side right hand dipstick and tube
Not Yet Reviewed
$10,317.33
Drop a Ford legend reborn into your project and experience the power of Ford Performance Parts 427 c.i.d. 535 hp long block crate engines. Built on Ford's Boss 351 blocks, these American-made engines are designed to provide you with big performance in a small block package, along with great drivability. The iconic 427 c.i.d. displacement, but on a Windsor platform—they offer all the powerplant you want at a price that you'll love! Technical information: * 535 hp at 5,600 rpm * 545 lbs.-ft. of torque at 4,500 rpm * Engine type: 351 based small block Ford * 4.125 in. bore x 4.00 in. stroke * 9.5 in. deck height Boss 351 block * SCAT forged steel crankshaft * SCAT forged steel H-beam connecting rods with ARP bolts * Mahle forged pistons with floating wrist pins * Hydraulic roller camshaft * Camshaft lift: .594 in. intake/.618 in. exhaust * Camshaft duration at .050 in: 242 degrees intake/248 degrees exhaust * Ford Performance aluminum "Z2" cylinder heads * 2.02 in. intake/1.60 in. exhaust valves * PAC 1219X ovate beehive valve springs * 10.5:1 compression ratio (nominal) * Roller rocker arms; 1.65:1 ratio * Ford Performance SFI-approved vibration damper; may require a spacer for pulley alignment * Cast aluminum, black wrinkle finish, Ford Racing script valve covers; fit most non-EFI applications * Steel oil pan with windage tray and scraper; 9-qt. capacity * Premium unleaded fuel recommended * Ignition timing: 32 degrees at 4,000 rpm * 5,600 maximum recommended rpm * Internally balanced; use neutral balance flywheel (not included) * Edelbrock Super Victor intake manifold recommended (not included) * Intake gaskets and pilot bearing included * Standard rotation water pump included * Timing cover will work with most standard rotation water pumps * Fuel pump eccentric installed, allows use of mechanical fuel pump * Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W firing order) * Distributor not included * MSD distributor recommended (modifications for intake clearance necessary) * Steel distributor gear required * Built with currently available parts * Photo and specifications may vary * Available in front or rear sump configurations
( 2 )
$12,159.09
LS Classic Series '63 Fuelie crate engines come with the complete line of LS Classic Series components pre-installed and ready to drop-in your classic ride. These crate engines start with a brand new, GM 495 hp "Hot Cam" LS3 right out of the box. They are then painted orange, or left natural, and are assembled with an LS Classic Series vintage inspired 1963 Fuelie style intake kit, billet aluminum valley pan, and small block style valve covers of your choice. These packages include a Holley Terminator engine management system and wiring harness with a GM electronic transmission controller. Once completely assembled, the Holley ECU is loaded with a start-up tune and the engines are run to check for leaks and oil pressure. Pricing varies depending on the engine's options. Specifications include: * Compression ratio of 10.7:1 * Recommended fuel is 92 octane * Cast aluminum block with 6-bolt cross-bolted main caps * Nodular iron crankshaft * Powdered metal connecting rods * Hypereutectic aluminum pistons * Steel hydraulic roller tappet camshaft * Valve lift of 0.525 in. for intake and exhaust * Duration at 0.050 in. is 219 degrees intake and 228 degrees exhaust * Lobe separation angle is 112 degrees * Combustion chamber volume is 68cc * Valve diameter is 2.165 in. for the intake and 1.590 in. for exhaust * Cast-roller trunnion rocker arms with a 1.7:1 ratio * Internally balanced * 58x Gen IV reluctor wheel * Maximum recommended rpm is 6,600 * Recommended torque converter stall is 2,400-2,800 Engines include: * Fully assembled long block * Holley Terminator engine management system with O2 sensor and transmission control * LS Classic Series '63 Fuelie intake manifold system with GM throttle body and injectors * Oil pump, pick-up and Camaro style oil pan * Billet aluminum valley plate with oil fill tube and breather cap * Intake manifold, fuel injectors and throttle body * Harmonic balancer * Front timing cover * Oil filter and passenger side oil dipstick and tube * High-performance rear dump exhaust manifolds * 14.000 in. automatic transmission flexplate
Not Yet Reviewed
$27,055.95
—
$27,374.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
