Crate Engines / Motors

Whether you just want a proven and convenient solution for your project vehicle, or your racing class mandates one, shop at Summit Racing Equipment for crate engines!...

Whether you just want a proven and convenient solution for your project vehicle, or your racing class mandates one, shop at Summit Racing Equipment for crate engines!

Building a new engine (or restoring an older one) takes time, tools, and lots of tuning, so buying a crate engine can be a wise investment. You can also decide how much finishing and customizing you want to do:

A short block includes a balanced rotating assembly and little else.
A long block usually comes with cylinder heads, oil pan, camshaft, and valve covers, along with horsepower and torque ratings
A fully dressed engine includes everything except front...

Whether you just want a proven and convenient solution for your project vehicle, or your racing class mandates one, shop at Summit Racing Equipment for crate engines!

A short block includes a balanced rotating assembly and little else.
A long block usually comes with cylinder heads, oil pan, camshaft, and valve covers, along with horsepower and torque ratings
A fully dressed engine includes everything except front drive accessories (like alternators and power steering pumps), and even a warranty!

These terms aren’t that precise, and can mean different things to different manufacturers, so make sure the crate engine you buy comes with everything you need and nothing you don’t. For more detailed information about selecting a crate motor for your project, check out this article on our official blog, which includes a helpful video.

Popular Engines

One of the most popular engine swap projects today uses the versatile LS design. Summit also carries other popular crate engine designs, including the Chevy small block 350, the Ford 302 and Coyote, and, of course, the Hemi.

Top Brands

Since 1968, Summit Racing has been helping back yard tinkerers and professional builders find the right parts for their build. A crate engine can be a significant investment, so we only carry manufacturers we’d use for our own projects. Shop from brands including Chevrolet Performance, Ford Performance, Mopar Performance, BluePrint Engines, VEGE Remanufactured Engines, First Mate, ATK, and more.

Showing In Stock Items. Show All 11 Items.

Individual Parts

Part Groups

Results 1 - 7 of 7

Summit Bucks

Chevrolet Performance LSX 454 Long Block Crate Engines

Chevrolet Performance LSX 454 long block crate engines are built with an all-forged, super-tough rotating assembly and feature a pair of new deep-breathing LSX 6-bolt cylinder heads. They also come dressed with great looking, all-new orange powdercoated valve covers with an engraved LSX 454 logo. With a carburetor and high-flow Chevrolet Performance intake manifold (sold separately), these engines are good for about 627 hp and 586 lbs.-ft. of torque. Due to the number of application variations, the LSX 454 crate engines do not include an oil pan, and the valve covers do not include provisions for mounting the ignition coil brackets. Other specifications include: * 4.185 in. bore * 4.125 in. stroke * Cast iron LSX Series block with cross-bolted 6-bolt main caps * Forged steel crankshaft * Forged steel connecting rods * Forged aluminum 11.0:1 compression pistons * Hydraulic roller camshaft * 0.635 in. lift intake/0.635 in. lift exhaust, 236 intake/246 exhaust duration at .050 in. lift * Aluminum LSX-LS7 cylinder heads with 70cc chambers * 1.8:1 aluminum roller rocker arms * 58-tooth reluctor wheel

4.0 out of 5 stars ( 1 )

$16,836.20

Summit Bucks

Ford Performance Parts 2024 7.3L Super Duty Long Block Crate Engine

Ford Performance Parts 7.3L V8 Ford gasoline crate engine from the 2024 F250 Super Duty is loaded with great features for your build. Features: * 7.3L displacement * Bore 107.2mm x stroke 101.0mm * 430 hp at 5,500 rpm * 485 lb.-ft. of torque at 4,000 rpm * 10.5:1 compression * Cast iron block * Aluminum cylinder heads * Intake valve diameter 55.13mm * Exhaust valve diameter 42.53mm * Lift (intake/exhaust) 13.67mm/15.26mm * Cam-in-block OHV design with variable cam timing * Forged steel crankshaft * Cast aluminum pistons * Port fuel injection * Firing order: 1-5-4-8-6-3-7-2 Each engine assembly includes: * Composite intake manifold * 87mm throttle body * Left and right exhaust manifolds * 8-qt. aluminum oil pan/cooler * Ignition coils and wires * Production flexplate * Factory lift brackets * M-6038-73 shipping and storage cradle * Bellhousing bolt pattern same as 4.6/5.4 and 5.0 Coyote * Engine weight: 580 lbs.

Not Yet Reviewed

$8,797.99

Summit Bucks

Chevrolet Performance 6.0L 366 C.I.D. L76 Remanufactured Crate Engines

Whether you're looking to build a reliable engine for towing and hauling or want the foundation for a high-performance build, the Chevrolet Performance 6.0L 366 C.I.D. L76 Remanufactured Crate Engines are a great starting point and at a more affordable cost. These crate engines boast a number of features and benefits. Each engine is tested to meet or exceed GM's original equipment specifications. Additionally, every component is inspected and replaced if necessary. As a result, these remanufactured crate engines provide excellent value and dependability. Specific information (instructions): The replacement crate engines are built with two different designed oil pans. Differences are the first design oil pan has threaded hole for oil level sensor; the second design oil pan is without hole for the oil level sensor. Transfer oil pan from original engine or procure new, if required. For C/K Trucks, G-van applications, the oil pan on the replacement engine has been upgraded with a new oil deflector (shield) installed over a new oil pressure relief valve. If transferring the original oil pan to the replacement engine transfer these new components to that oil pan. --Transfer crankshaft balancer, crankshaft sensor, camshaft sensor, sensor wiring harness and bracket from original engine or procure new. --Install new crankshaft balancer bolt that is included with engine assembly. --Refer to instruction sheet for general/detailed information and instructions on components that are required to be transferred from the original engine assembly or procured new. --Transfer crankshaft balancer, crankshaft sensor, camshaft sensor, sensor wiring harness and bracket from original engine or procure new. --Install new crankshaft balancer bolt that is included with engine assembly. The replacement engine is built with a first or second design oil pan. The first design pan has a threaded hole for applications equipped with an oil level sensor. The second design oil pan is for applications that do not use an oil level sensor; no threaded hole. Transfer oil pan from original engine or procure new, if required. The replacement engine is built with first or second design valve rocker arm covers. The first design valve covers do not use quick connect PCV tubes. The second design valve covers use quick connect PCV tubes. Transfer valve covers from original engine or procure new, if required. The replacement engine may use rivet-type plugs in place of the coolant air bleed covers located at the top rear of each cylinder head. In applications that contain the rivet-type plug, it is not necessary to install the coolant bleed covers. For LS4 Applications, transfer the A/T flywheel/flexplate locator that is pressed into the rear hub of the crankshaft from the original engine or procure new. For C/K Trucks, G-van applications, the oil pan on the replacement engine has been upgraded with a new oil deflector (shield) installed over a new oil pressure relief valve. If transferring the original oil pan to the replacement engine transfer these new components to that oil pan. For 2007 Cadillac Escalade and GMC Yukon Denali applications w/6.2L L92: Engines prior to April 2006 were built with AFM (Active Fuel Management) hardware components, but the AFM system is not enabled on the 2007 L92 engine. The replacement engine does not contain the AFM hardware; it includes a valley cover that is used in place of the VLOM (valve lifter oil manifold). Do not transfer AFM hardware to replacement engine. When performing an engine replacement on a L92 engine that was originally equipped with AFM hardware, the VLOM electrical connector must be removed from the wiring harness. Included Engine Content: * Engine Block * Pistons * Crankshaft * Connecting Rods * Cylinder Head * Camshaft * Front Cover * Housing, Cr/Shf Rear Oil Seal * Valve Cover/Cam Cover * Valve lifter Oil Manifold (VLOM) * Oil Pan

Not Yet Reviewed

$7,373.99

Summit Racing™ 1973-76 Mopar A-Body 426 C.I.D. 610 HP EFI Engine Swap Pro Packs

Our Summit Racing™ 1973-76 Mopar A-Body EFI engine swap Pro Packs deliver engineered swap systems that eliminate the guesswork and doubt, while saving you the time you would have spent trying to match up universal parts. We've brought together Hooker components and BluePrint engines, creating a package of power and performance for your vehicle. Each Pro Pack contains Hooker BlackHeart engine mount brackets, transmission crossmember, polyurethane transmission mounts, and 304 stainless steel Mopar A-Body Gen III Hemi swap headers. A Chrysler Hemi-compatible 426 c.i.d. ProSeries fuel-injected engine, base dressed or deluxe dressed, completes the package. Select the Summit™ engine swap Pro Pack desired for your A-Body. Notes: * Base dressed ProSeries engine includes water pump * Deluxe dressed ProSeries engine includes spark plugs and front accessory drive with water pump, alternator, power steering pump, and A/C compressor with either black or polished pulleys Engine specs: * 610 hp/525 lb.-ft. torque * Compression ratio: 10.48:1 Block: * New "BGE" Hellcat engine block * 4-bolt main * 4.090 in. bore * One-piece rear main seal Rotating Assembly: * Forged steel crank * 4.050 in. stroke * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * Gen III Hemi Apache aluminum cylinder heads * 73cc chamber * 2.140 in. intake/1.650 in. exhaust valves Cam specs: * Hydraulic roller cam * .610 intake/.611 exhaust lift * .614 intake/.614 exhaust lift (base dressed) * 231 intake/255 exhaust duration at .050 in. * 113-degree LSA * 115-degree LSA (base dressed) Ignition timing: Controlled by ECU Also included with engine: * Fuel injection * Throttle body * Fabricated intake manifold * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Coil(s) * Timing cover (Car) * Valve covers * Holley Terminator ECU controller kit and wiring harness

Not Yet Reviewed

$18,875.14

ATK High Performance Ford 302 Stock Drop-In Long Block Crate Engines

Classic Ford 302 stock drop-in long block crate engines from ATK High Performance are shipped to you fully dressed. These are basic stock engines with moderate horsepower and torque based off the 80-86 Ford 302 engine. These engines typically make about 240 horsepower on the dynamometer. Additional specs: * Block: seasoned OE roller block * Bore/Stroke: up to 4.060 x 3.000 * Displacement: 302 c.i.d. * Crankshaft: OE Ford cast late model crankshaft (50 oz. imbalance) * OE steel connecting rods 5.4 in. stock bolts * Pistons: hypereutectic * Piston rings: moly rings * Compression Ratio: 8.5:1 * Camshaft: hydraulic flat tappet * Camshaft specifications: OE stock * Camshaft bearings installed and blocked to OEM position * Cylinder heads: OE cast iron * Freeze plugs: brass installed and sealed * Rocker arms: stamped steel 1.5 ratio * Oil galley plugs: installed and sealed * Oil pan: OE 5 qt. front sump * Weight: 430 lbs. * For engine break-in please follow the ATK break-in procedure that is included with the engine.

3.94 out of 5 stars ( 32 )

$3,998.99

BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block Crate Engines with Fuel Injection

BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block crate engines with fuel injection are offered in two models—one with new block casting, pulleys, and other extras. SPECIFICATIONS FOR BOTH MODELS INCLUDE: * HP and Torque: 390 hp / 410 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum Heads * Hydraulic Roller Cam * Cast Iron Crankshaft * Hypereutectic Pistons * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Harmonic Balancer Thermostat and Water neck Aluminum intake HEI distributor Spark plugs and wires EFI system Dyno test results shipped with engine INCLUDED ONLY ON MODEL BP3505CTFD: * Standard rotation long water pump INCLUDED ONLY ON NEW BLOCK CASTING MODEL BP3505CTFK: * Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump (does not fit Corvette)

5.0 out of 5 stars ( 1 )

$7,399.00

VEGE Remanufactured Long Block Crate Engines

VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.

3.72 out of 5 stars ( 79 )

$3,768.99

—

$4,005.99

Page 1 of 1