Availability
Crate Engines, Short Blocks, Engine & Transmission Combos
Edelbrock Gen III 426 HEMI E-Force Supercharged Long Block Crate Engines
Edelbrock Gen III 426 HEMI E-Force Supercharged long block crate engines start with brand new iron Mopar 392 blocks. The engines are then assembled with high-quality components, including Edelbrock E-Force supercharger systems featuring Eaton TVS R2650 rotors—which provide unparalleled efficiency, whisper quiet operation, and OEM reliability. A 4.090 in. bore and 4.050 in. stroke help these HEMI engines produce incredible low-end torque, while the 9.9:1 compression ratio allows for safe and reliable supercharged performance on 91 octane pump gas. Edelbrock Gen III 426 HEMI E-Force Supercharged long block crate engines are available with or without electronics (ECU with tune and wiring harness). Engine Specifications: * Displacement: 426 c.i.d. * Horsepower: 808 hp * Torque: 762 lbs.-ft. * Compression: 9.9:1 * Block: New iron Mopar 392 * Crankshaft: Forged 4340 * Pistons: Forged aluminum—5cc * Rods: Forged H-beam * Camshafts: Comp Cams 226 degrees/234 degrees, .619/.612, 116 LSA * Rocker arms: Mopar OEM * Induction: E-Force R2650 Supercharger * Cylinder heads: Edelbrock Performer RPM * Finish: Black powdercoat * Warranty: 2-year/unlimited mileage The high twist, 4-lobe R2650 rotor design is 15 percent larger than the TVS 2300 and features several improvements to maximize efficiency and performance at upper rpms. Improvements and advantages of R2650 rotors over R2300 rotors: * 170 degree twist (versus 160) * Better sealing with optimized length-to-diameter ratio * Increased durability with larger bearings and timing gears * Pressure relief ports in bearing plate for reduced input power * 4 percent more efficient * 15 percent larger displacement * 18 percent less input power required * 25 percent more airflow at 18,000 rpm and 14 psi boost (2.0 pressure ratio)
Not Yet Reviewed
$28,418.99
—
$32,726.99
BluePrint Engines 383 C.I.D Stroker 1996-2000 GM Vortec Truck/SUV Crate Engines
Give your Chevy/GMC truck a new powerplant using one of these BluePrint Engines 383 C.I.D Stroker 1996-2000 GM Vortec Truck/SUV crate engines. They feature increased horsepower and torque over the factory engine and install in any 1996-2000 Chevy or GMC truck or SUV. The crate engines are designed to re-use the factory EFI and require no tuning. BluePrint Engines 383 C.I.D Stroker 1996-2000 GM Vortec Truck/SUV crate engines feature: * New BluePrint cast iron block, 4-bolt main, 1-piece rear main seal, mechanical fuel pump provision, passenger side dipstick, drilled and tapped for clutch linkage * New BluePrint steel crankshaft with 3.750 in. stroke * OEM type 5.700 in. connecting rods w/ 150,000 psi bolts * Hypereutectic pistons * Externally balanced front/externally balanced rear * BluePrint aluminum cylinder heads, 64cc chamber, 2.02 in. intake/1.60 in. exhaust valves, 195cc intake/75cc exhaust runners * Hydraulic roller camshaft, .477 Intake/.471 Exhaust, 202 Intake /212 Exhaust duration, @ .050, 115 degree lobe separation
( 1 )
$6,999.99
BluePrint Motorsports Pro Series Chevy 632 C.I.D. 815 HP Dressed Long Block Crate Engines
BluePrint Motorsports Pro Series Chevy 632 C.I.D. 815 HP dressed long block crate engines deliver a pavement-pounding 815 hp in your choice of carbureted or fuel-injected configurations, with classic or Blackout Reaper styling. Each engine is built with premium forged internals, precision machining, and a durable bottom end engineered to withstand massive torque, high rpm, and wide-open-throttle abuse. Fuel-injected models provide crisp throttle response, consistent performance, and modern drivability, while carbureted versions deliver the hard-hitting attitude and straightforward tuning traditional muscle enthusiasts demand. Base-dressed for a clean installation while allowing builders to select the fuel, ignition, and accessory combination that suits their project, these powerplants offer maximum displacement with Pro Series durability. Whether you prefer a traditional appearance or the sinister, stealth-inspired look of the Blackout Reaper Edition, BluePrint Motorsports Pro Series Chevy 632 C.I.D. 815 HP dressed long block crate engines are ready to help you dominate the street, strip, or show field! More product details, items, and notes include: * Horsepower/Torque - 815/775 ft. lbs. * Compression Ratio - 11.0:1 * BluePrint Engines aluminum cylinder heads (PS8012), hydraulic roller camshaft, forged crankshaft, forged pistons, high-strength cast iron block * Tall deck - cylinder deck is approximately 0.400 in. taller/wider than OEM block) * Mechanical fuel pump provision - yes * Rear main seal - 1-piece * Mains - 4-bolt * Bore - 4.600 in. * Stroke - 4.750 in. * Connecting rods - forged H-beam 6.635 in. * Internally balanced front and rear * Cylinder heads feature a 0.300 in. raised exhaust port compared to an OEM casting * Camshaft features 0.698 in. intake/0.698 in. exhaust lift, 272 intake/282 exhaust duration at 0.050 in. lift, 110-degree LSA (Lobe Separation Angle) EFI setups may include: * Thermostat and thermostat housing (application dependent) * Pro Billet distributor (BPP3503BK) * Holley Sniper 4500 EFI system * Harmonic balancer (BPP454I) * Spark plugs (BPP7938) and wires * Intake manifold * Timing cover * Valve covers * Oil pump (application dependent) * Oil pan Carbureted setups may include: * Pro Series Ready-to-Run distributor (BPP3503BK) * Holley GEN III Ultra Dominator carburetor * Thermostat and thermostat housing (application dependent) * Harmonic balancer (BPP454I) * Intake manifold * Fuel pump block-off plate (application dependent) * Spark plugs (BPP7938) and wires * BluePrint dipstick (application dependent) * Timing cover * Valve covers * Oil pump (application dependent) * Oil pan
( 11 )
$17,699.99
—
$20,899.99
Ford Performance Parts 5.0L Coyote Gen 4 Aluminator SC Crate Engines
Built for high performance applications, the Ford Performance 5.0L Coyote Gen 4 Aluminator SC crate engines are a powerhouse—ideal for custom race builds and 2024 GT Mustangs. While the Aluminator block, cylinder heads, oil pan, and intake manifold are factory pieces, Ford Performance replaces the hypereutectic pistons and sintered-steel rods with Mahle forged slugs, ARP 2000 rod bolts, and Manley forged H-beam rods, keeping the factory 12.0:1 compression ratio in naturally aspirated form and 9.5:1 on its boost-ready Aluminator crate. These flagship crates are quite popular with Ford diehards in the custom car and street rod world—because who really wants to put a Chevy LS in a deuce coupe? Crate engine features and specs: * Fits 2024+ Mustang GT * 5.0L (302 cubic inches) * 9.5:1 compression ratio (nominal) * Mahle hard anodized forged pistons with Grafal low friction coating * Manley H-beam connecting rods with ARP 2000 bolts * Forged steel crankshaft * Uses production 2024 Mustang GT aluminum block * 2024+ Production oil pan * Tuned composite Mustang GT intake manifold with production dual drive-by-wire 80mm throttle bodies with variable runner control * Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction. * Mustang GT production camshafts * Includes Ford Performance colder, heat range zero spark plugs (M-12405-M50A) * Includes Ford Performance oil filter (M-6731-FL820) * Includes billet steel gerotor oil pump gears (M-6600-M50A) * Vehicle harness and PCM not included * Does not include alternator (for alternator kit: refer to part numbers M-8600-M50BALT or M-8600-M50ALTA) * Engine mount bosses and bell housing mount pattern common to 4.6L modular engines * Does not include exhaust manifolds
Not Yet Reviewed
$15,261.99
BluePrint Builder Series LS427/585HP Standard Edition EFI Crate Engine and 4L65/70E Trans Combos
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a pulley kit and 4L65/70E automatic transmission. The aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$23,999.99
—
$26,399.99
BluePrint Builder Series LS376/530HP Standard Edition EFI Crate Engine and ZF 8HP70 Trans Combos
The BluePrint Builder Series LS376/530 hp Standard Edition EFI crate engine and ZF 8HP70 trans combo is a complete, modern, turnkey LS powertrain package for performance builds. It features a powerful 376 cu. in. (6.2L) LS engine making 530 hp, paired with a cutting-edge, lightning-fast ZF 8-speed automatic transmission. The kit is managed by a Holley EFI system for easy integration into restomods, pro-touring cars, and hot rods, offering high performance and reliability. Key component details: * BluePrint Builder Series: This is a line of complete engine/transmission packages designed to simplify swaps by taking the guesswork out of matching components, saving time and expense * LS376/530 hp: A 376 cu. in. (6.2L) LS-based engine (similar to GM's LS3) producing 530 hp and 495 lbs.-ft. of torque, built with BluePrint's aluminum heads, hydraulic roller cam, and hypereutectic pistons on a strong cast-iron block * Standard Edition EFI: Means it's fuel-injected, coming with a BluePrint-calibrated Holley Terminator X ECU, wiring harness, drive-by-wire pedal—and essential accessories like the intake manifold, throttle body, alternator, and water pump for a truly "swap-ready" experience * ZF 8HP70 Trans: A sophisticated 8-speed automatic transmission known for its quick 200ms shift times, wide gear ratio, and lightweight design, providing dual-clutch-like responsiveness with modern automatic refinement, complete with a torque converter installed * What this combo offers you: -- Performance: Modern shifting and strong power for thrilling acceleration -- Ease of installation: Comes assembled, tested, and tuned for a smoother swap -- Reliability: Built with quality parts and backed by the factory -- Modern drivetrain: Brings contemporary automatic transmission technology to classic cars
Not Yet Reviewed
$19,999.99
BluePrint Pro Series Chevy LS 427 C.I.D. 800 HP EFI Supercharged Deluxe Long Block Crate Engines
BluePrint Pro Series Chevy LS 427 ci.d. EFI supercharged deluxe long block crate engines deliver 800 hp and 780 lbs.-ft. of torque. They also include LS3 aluminum cylinder heads, forged pistons, hydraulic roller camshaft, forged crankshaft, a Holley Terminator X Max Gen IV complete ECU and harness for engine management, and a polished or black finish accessory drive system. Additional features and specs: -- Block: * BluePrint Engines high-strength cast iron block * Increased deck thickness and strength webbing * Extended cylinder skirt * Priority main oiling * 4.070 in. bore * 6-bolt main * One-piece rear main seal * Improved water jacket design * Utilizes OEM LS3 front and rear covers * Compression ratio: 11:1 -- Rotating Assembly: * New forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced -- Cylinder Heads: * BluePrint aluminum cylinder heads * 70cc chamber * 2.165 in. intake / 1.600 in. exhaust valves * 259cc intake / 102cc exhaust runners -- Cam Specs: * Hydraulic roller * .624 intake / .624 exhaust lift * 239 intake / 255 exhaust duration * At .050-114 degree lobe separation -- Ignition Timing: * ECM supplied with calibration -- Also Includes: * Holley Terminator X Max - Gen IV complete ECU/Harness EFI system * Magnuson TVS2650 supercharger * Coil packs * Valve covers * Oil pan * All sensors required for engine to run * Drive-by-wire throttle body * Timing cover * Spark plugs and wires * Harmonic balancer * Front accessory drive with power steering pump, water pump, alternator, and air compressor -- Notes: * Not for use in pollution-controlled vehicles. * BluePrint Engines recommends air intake kit BPPLS01013 to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU / tuning.
Not Yet Reviewed
$26,299.99
—
$26,399.99
BluePrint Motorsports GM 396 C.I.D. 530 HP Stroker Base Long Block Crate Engines
BluePrint Motorsports presents their all-forged small block Chevy-compatible engine, built for hard-hitting racing performance. Available carbureted or fuel injected, they are designed to handle extreme conditions and come packed with race-proven components. Select the best engine for your build. BluePrint Motorsports GM small block-compatible 396 cu. in. engines base-dressed crate engines will include either a Holley 950cfm double pumper carburetor with mechanical secondaries or a Holley Sniper 2 EFI self-tuning kit in chrome, along with the following: * BluePrint Engines aluminum intake manifold * BluePrint Engines valve covers * Moroso Street/Strip oil pan * HEI distributor * High-volume oil pump * Timing cover * Balancer Specifications and features for both carbureted and fuel injected engines: * 530 hp/480 lb.-ft. of torque * Compression ratio: 10.4:1 * Requires Race Fuel of 100+ octane * BluePrint Engines high-strength cast iron block -- Cylinders honed on computer-controlled machine to within .0002 straightness and roundness -- Cylinders are sonic tested for thickness -- Drilled and tapped for clutch linkage -- Align honed main bearing bore -- Mechanical fuel pump provision -- Passenger side dipstick -- One-piece rear main seal -- 4-bolt main -- 4.000 in. bore * Rotating assembly -- BluePrint forged crankshaft -- 3.875 in. stroke -- Forged I-beam 6.000 in. connecting rods -- BluePrint Engines forged 4032 pistons -- Internally balance front--externally balanced rear * BluePrint aluminum cylinder heads -- 64cc chamber -- 2.08 in. intake/1.60 in. exhaust valves -- 220cc intake/67cc exhaust runners * Hydraulic roller camshaft -- .638 intake/.622 exhaust lift -- 251 intake/259 exhaust duration at .050 in. -- 114-degree LSA * Ignition timing: 34 degrees total Note: BluePrint Motorsports engines are built for maximum performance and are intended for extreme duty applications. Because of the high-stress nature of their use, these engines are sold without any warranty, expressed, or implied. This engine features a true 4-inch bore, which mathematically yields 389 CID with a 3.875-inch stroke.
( 1 )
$8,299.99
—
$9,399.99
Chevrolet Performance HT383 C.I.D. 323 HP Crate Engines
Specially tuned for torque, the all-new HT383 delivers great power in a small block package for your truck or street rod. These Chevrolet Performance 383 c.i.d. 4-bolt main, cast iron engines, have approximately 9.1: 1 compression with 323 hp at 4,200 rpm, and 444 ft.-lbs. of torque at 3,000 rpm. Included with these engines are forged 4340 steel externally balanced crankshafts, 5.7 in. powdered metal connecting rods, hypereutectic dished top pistons with offset pins. Hydraulic billet steel roller camshafts are installed with .431 in. intake lift, .451 in. exhaust lift and duration at .050 in. for intake is 196 and 206 for exhaust with lobe centerline at 109 degrees. Stamped steel self aligning rocker arms with 1.5:1 ratios are installed on the Vortec cylinder heads. All aluminum dual plane dual flange intakes with external EGR provisions, cast iron long leg, standard "V" belt rotation water pumps with 1979-86 power steering pump boss. Valve measurements are 1.940 in. for intake and 1.50 in. for exhaust. Additional items installed with these crate engines are 8 in. harmonic balancers, 12 3/4 automatic flexplates, 4-qt. oil pans with windage trays, painted valve covers with oil cap, grommets, provisions for PCV and breathers. Composite front timing covers, brass freeze plugs, engine oil dipstick and tube for passenger side location. Spark plugs come installed along with fuel pump block-off plates and Engine lift tabs for easy installs. These HT383 are ideal replacements for any 1978 and older carbureted engines or off-road applications.
( 1 )
$8,060.99
Ford Performance Parts 2024 Gen 4 5.0L 480 HP Coyote Long Block Crate Engines
Ford Performance Parts 2024 Gen 4 5.0L 480 hp Coyote engines are the latest all-aluminum crate engines from the 2024 Mustang GT. These modern 5.0L 32-valve DOHC V8s use advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow cylinder heads, dual throttle bodies, and a heightened compression ratio to deliver 480 hp and 415 lb.-ft. of torque (with premium fuel). These lightweight plasma-transferred wire-arc spray aluminum cylinder blocks feature cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, and an optimized oil drain back and windage control to improve high-rpm performance. Available with production flexplate (automatic) or dual mass flywheel (manual) and both include engine harness. Engine specs: * 480 hp at 7,150 rpm * 415 lb.-ft. of torque at 4,900 rpm * 12.0:1 compression ratio * Bore 93mm x stroke 92.7mm * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on BOSS 302 Mustang * Forged steel crankshaft * Aluminum block with plasma transferred wire arc spray weld liner coating * Longer, 12mm head bolts for higher clamp load * 9.5 qt capacity steel oil pan * Tuned composite intake manifold provides efficient air delivery and weight savings * Twin 80mm single bore drive-by-wire, electronic throttle bodies with variable runner control * High-flow aluminum cylinder heads, dual overhead camshaft (DOHC), four valves per cylinder, variable intake and exhaust camshaft timing * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * Mustang GT 409 stainless steel tubular exhaust manifold on the RIGHT SIDE ONLY
Not Yet Reviewed
$11,701.99
BluePrint Builder Series LS427/585HP Standard Edition EFI Crate Engine and T56 Transmission Combos
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a polished (or black) pulley kit and T56 manual transmission. The BluePrint aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged steel crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 trans combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged steel crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$24,199.99
—
$26,499.99
Edelbrock Musi Carbureted 555 C.I.D. 676 HP Long Block Crate Engines
Edelbrock and Pat Musi are a powerful combination, and Edelbrock Musi carbureted 555 c.i.d. 676 hp long block crate engines are no less impressive. The big feature is the E-CNC cylinder heads that are strategically ported to achieve optimal airflow, gaining you maximum horsepower and torque in high performance street applications. Plus, their key advantage is the stock location of the exhaust port, allowing you to use readily available, off-the-shelf headers. Edelbrock Musi carbureted 555 C.I.D. 676 hp long block crate engines come ready to perform; just bolt on and fine tune to pack big block power in your ride. Additional features include: * Dart Big-M block * Scat forged steel crank * Forged H-beam rods * Forged pistons * Hydraulic roller camshaft * Roller rockers * Victor Jr. manifold * Thunder Series AVS 800 cfm carburetor
Not Yet Reviewed
$20,775.99
Chevrolet Performance ZZ6 EFI Turnkey Crate Engines
Chevrolet Performance ZZ6 EFI Turnkey crate engines build on more than 65 years of small block heritage and the legacy of the pioneering "ZZ" crate engine family to offer thoroughly modern performance balanced with traditional style. The engineers adapted a unique, electronically controlled port fuel injection system to the ZZ6 350, using an aluminum intake manifold that has the appearance of a carbureted intake. A fuel injection throttle body mounted in place of the carburetor allows a traditional air cleaner to be installed. The result is a great, traditional appearance and all the drivability advantage of EFI on the highway. A simple plug-and-play control system rounds out the package to get the engine running in your project without the need for third-party tuning. These Turnkey crate engine kits include the distributor and damper installed. The throttle body, air conditioning pump, alternator, single-belt front-end accessory drive kit, and more are also included. Installation notes: * Crate engine kit includes pre-programmed, self-learning control system * Comes with 12.750 in. externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission. * Not intended for marine applications. SPECIFICATIONS: Engine Type: Chevy Small Block V8 420 hp at 5800 rpm 408 lb.-ft. at 4500 rpm Displacement (cu. in.): 350 Bore x Stroke (in.): 4.000 x 3.480 Block: Cast iron with 4-bolt main caps Crankshaft: Forged steel, shot peened Connecting Rods: Forged powdered metal Pistons: Hypereutectic aluminum Camshaft Type: Steel hydraulic roller Valve Lift (in.): .474 intake / .510 exhaust Camshaft Duration (at .050 in.): 208 degree intake / 221 degree exhaust Cylinder Heads: Fast Burn aluminum; 62cc chambers Valve Size (in.): 2.000 intake / 1.550 exhaust Compression ratio: 9.72:1 nominal Rocker Arms: Aluminum; roller-style Rocker Arm Ratio: 1.5:1 Recommended Fuel: Premium pump Ignition Timing: 36 degree total at 4,000 rpm Maximum Recommended RPM: 5,800 Balanced: External Flexplate: 12.750 in.
Not Yet Reviewed
$14,406.99
Ford Performance Parts Aluminator 5.2 XS Long Block Crate Engines
Ford Performance Parts Aluminator 5.2 XS long block crate engines are the most powerful, naturally aspirated, modular engines ever built by Ford. Utilizing the technology and hardware originally developed for the Shelby GT350 Mustang, the Aluminator 5.2 XS engines have a rating of 580 hp—making them worthy successors of their previous rendition, the A50XS. They're hand-assembled with premium aftermarket components, along with unique components developed specifically for the Cobra Jet racing program. Ford Performance Parts has created a balanced combination of high-end horsepower and strong mid-range torque in the ultimate cross-plane crankshaft long blocks: the Aluminator 5.2 XS engines. Summary of Aluminator XS features and specs include: * Designed to work with 2015-17 Mustang GT electronics—custom calibration required * 580 hp * 445 lbs.-ft. torque * 5.2L 317 cu. in. * 12:1 compression ratio * Hard-anodized forged pistons with low-friction coating * Unique H-beam connecting rods with bolts * Unique Ford Performance forged steel cross-plane crankshaft * Ford Performance Shelby GT350 cylinder block * Ford Performance Shelby GT350 oil pan, featuring integrated windage and slosh baffles, as well as an integrated oil pickup * Ford Performance Cobra Jet tuned intake (will not clear production 2015-17 hood without modification) * Ford Performance dual 65mm bore throttle body * Four-valve-per-cylinder Shelby GT350 fully CNC-ported aluminum heads with roller-finger camshaft followers * Unique Ford Performance camshafts * Camshaft specifications: Intake—14mm lift/270 degrees duration, exhaust—14mm lift/270 degrees duration * Low-leak rate Variable Cam Timing (VCT) phasers * Robust primary timing chains, as used on Shelby GT350R * Ford Performance 47 lb. fuel injectors * Ford Performance M-12A227-CJ13 high-rpm pulse ring * Unique Ford Performance blue coil covers with added unique badging—only on the Aluminator 5.2XS * Ford Performance zero (0) heat-range spark plugs * Ford Performance oil filter * 200 amp alternator and Front Engine Accessory Drive (FEAD) kit, as used on the Cobra Jet race car
Not Yet Reviewed
$23,812.99
BluePrint Engines GM 400 C.I.D. 500 HP Deluxe Dressed MPFI Long Block Crate Engines
BluePrint Engines 400 SBC-compatible performance crate engines are dyno tested with guaranteed power levels of 500 hp and 500 lb.-ft. of torque with a compression ratio of 10.3:1. These deluxe dressed, multi-port fuel injection systems, complete with ECU and full wiring harness, are specifically tuned and optimized engines that will perform well beyond most self-learn EFI systems available today. Designed for hassle-free start up and operation, they are available with or without a polished or black finish pulley kit. Select the 400 SBC-compatible performance crate engine desired for your build. Specs and features: * BluePrint Engines high-strength cast iron block -- Drilled and tapped for clutch linkage -- One-piece rear main seal -- 4-bolt main -- 4.125 in. bore * Rotating assembly: -- BluePrint forged crankshaft -- 3.750 in. stroke -- 5.700 in. connecting rods -- BluePrint forged pistons -- Internally balanced front, externally balanced rear * BluePrint Performance aluminum cylinder heads: -- 64cc chamber -- 2.08 in. intake/1.600 in. exhaust valves -- 220cc intake/65cc exhaust runners * BluePrint hydraulic roller camshaft: -- .553 intake/.576 exhaust lift -- 236 intake/242 exhaust duration at .050 -- 110-degree lobe separation * Ignition timing: -- Computer controlled by BluePrint ECU * Additional components: -- BluePrint multi-port fuel injection--self-learning electronic control unit -- Single plane machined aluminum intake manifold -- Polished chrome "BluePrint" engraved valve covers -- Polished chrome BluePrint air cleaner -- Satin aluminum water pump -- Spark plugs and wires -- Harmonic balancer -- Timing cover -- Distributor -- Oil pan * Polished or black front accessory drive (depending on kit selected): -- Reverse rotation short water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut-style air conditioning compressor
( 4 )
$9,799.99
—
$11,899.99
Chevrolet Performance Connect and Cruise 376/480 HP LS3 Crate Engine with 6L80E Transmission Combos
The Chevrolet Performance Connect and Cruise 376/480 HP LS3 Crate Engine with 6L80E Transmission Combo is an all-in-one, factory-matched powertrain kit designed by General Motors for custom car builders and classic hot rod restorations. This specific plug-and-play system combines a high performance 6.2L LS3 V8 engine equipped with a racing-inspired camshaft, a modern 6-speed automatic transmission, and all the standalone electronics needed to make them function together seamlessly in a vintage vehicle without third-party tuning. Eliminate the guesswork of mismatched parts! What's included: * The Crate Engine: A fully assembled LS376/480 engine package complete with intake manifold, throttle body, fuel rails, ignition coils, and water pump * The Transmission: A robust 6L80-E 6-speed automatic transmission with an included torque converter * Electronics and Wiring: Standalone engine (ECM) and transmission control modules, a specialized drive-by-wire throttle pedal, oxygen sensors, and a mass airflow (MAF) sensor * Installation Hardware: An installation kit providing the necessary bolts and cross-component hardware to marry the engine and transmission together Key benefits of this combo: * The "Hot Cam" Advantage: By upgrading the factory base LS3 cam to the GM Hot Cam, this engine gains a rougher, muscle-car idle and pushes horsepower from the standard 430 hp up to 480+ hp * True Standalone Operation: The included computers are specially calibrated for retrofit vehicles. They do not require integration into modern anti-theft systems or production vehicle sub-modules. All it needs to run is power, ground, an electric cooling fan, and a high-pressure fuel pump * Modern Driving Dynamics: Pairing the engine with a 6-speed 6L80-E gives classic vehicles the aggressive launch of a low first gear alongside quiet, fuel-efficient highway cruising
Not Yet Reviewed
$20,662.99
S&S Cycle V-Series Long Block Engines
Why rebuild that old stock Evo engine? Just replace it with S&S Cycle V-Series long block engines. These engines will save you unwanted down time and money by using your existing fuel or aftermarket ignition system. Tuning your carburetor or EFI system will be required, but definitely worth the extra effort. S&S Cycle V-Series long block engines are built using genuine S&S components, so you know this motor is built to last.
Not Yet Reviewed
$7,099.99
—
$8,299.99
TH Marine G-Force Troll Perfect Trolling Motor Control Enhancers
Gain control of your trolling motor and enhance your fishing experience with TH Marine's G-Force Troll Perfect Trolling Motor Control Enhancers. Whether fishing in wind, waves, current, or just whenever you need the high-speed settings, the Troll Perfect will allow you to stop fighting the kickback, and side-to-side torque steer of your trolling motor. A small quarter-turn adjustment of the lower stainless steel clamp is enough to fine tune your trolling motor just the way you like it. Troll Perfect will also eliminate that "sloppy foot pedal" issue. With the Troll Perfect, anglers can now comfortably fish in any condition without having to fight the trolling motor, worry about keeping a straight course, or losing balance and falling off the boat while trying to steer. Having a Troll Perfect means less effort, less fatigue, and better fishing! Available colors: black, lime green, red, and purple. Please specify the color option that you'd prefer. Key features: * All Troll Perfect Systems include top and bottom pieces and two hose clamps for assembly * The patented Troll Perfect trolling motor adjustment easily clamps over the motor shaft swivel bearing, allowing you to easily adjust the tension on your cable steering so you can instantly adapt to any condition on the water * Installation is fast and simple, it takes only minutes, and without any modification to your trolling motor * Compatible with MotorGuide and Minn Kota trolling motors (but not with Minn Kota Ultrex or Terrova models)
Not Yet Reviewed
$38.99
—
$43.99
BluePrint Pro Series Chevy LS 376 C.I.D. 700 HP EFI Supercharged Deluxe Long Block Crate Engines
BluePrint Pro Series Chevy LS 376 c.i.d. EFI supercharged deluxe long block crate engines deliver 700 hp and 640 lbs.-ft. of torque. They include LS3 aluminum cylinder heads, forged pistons, hydraulic roller camshaft, nodular iron crankshaft, a Holley Terminator X Max Gen IV complete ECU and harness for engine management, a polished or black finish accessory drive system, and more. Additional features and specs: -- Block: * BluePrint Engines high-strength cast iron 6.2L block * Increased deck thickness and strength webbing * Extended cylinder skirt * Priority main oiling * 4.070 in. bore * 6-bolt main * One-piece rear main seal * Improved water jacket design * Compression ratio: 9.5:1 -- Rotating Assembly: * Forged crankshaft * 3.622 in. stroke * 6.125 in. connecting rods with 150,000 psi bolts * Forged pistons * Internally balanced front and rear -- Cylinder heads: * BluePrint aluminum cylinder heads * 70cc chamber * 2.165 in. intake / 1.600 in. exhaust valves * 259cc Intake / 102cc exhaust runners -- Cam specs: * Cam type: Hydraulic Roller Cam * .612 intake / .585 exhaust lift * 225 intake / 238 exhaust duration * @.050-113 degree lobe separation -- Also includes: * Holley Terminator X Max - Gen IV complete ECU/Harness EFI system * Coil packs * Valve covers * Oil pan * All sensors required for engine to run * Drive-by-wire throttle body * Throttle pedal * Timing cover * Spark plugs and wires * Harmonic balancer * Front accessory drive with power steering pump, water pump, alternator, and air compressor -- Notes: * Not for use in pollution-controlled vehicles. * BluePrint Engines recommends air intake kit BPPLS01013 to ensure correct MAF calculations and Dyno calibration are maintained with the above ECU / tuning.
Not Yet Reviewed
$23,199.99
—
$23,299.99
BluePrint Builder Series LS376/495HP Truck Edition EFI Crate Engine and 4L65/70E Trans Combos
The BluePrint Builder Series LS376/495 HP Truck Edition EFI crate engine and 4L65/70E trans combo is a complete, pre-assembled, GM LS-compatible engine and automatic transmission package, designed for easy installation in trucks or SUVs. It features a 376 cu. in. (6.2L) LS-style engine making 495 hp, paired with a durable 4L65/70E automatic transmission—all ready to drop in with installed accessories like a front drive, oil pan, and starter, eliminating complex assembly and setup. Key components: * Engine: A 376 cu. in. (6.2L) LS-compatible, fuel-injected V8 engine with a high-strength cast iron block, aluminum heads, and internals built for truck applications * Horsepower: Rated at 495 hp and 490 lbs.-ft. of torque, dyno-tested for reliability * Transmission: A robust 4L65/70E 4-speed automatic transmission, chosen for its strength in high-torque applications like trucks * Builder Series package: This means it's a complete, ready-to-run assembly, including the engine and transmission bolted together, with installed accessories (alternator, power steering, starter, etc.) and a pre-calibrated EFI system, saving installation time and hassle. * Truck Edition: Features like the truck intake manifold and specific tuning make it ideal for truck/SUV swaps. * The combo is a plug-and-play solution for LS swaps, offering significant power and reliability in a complete, factory-assembled package, perfect for builders wanting to avoid the complexities of sourcing and matching individual components.
Not Yet Reviewed
$22,999.99
BluePrint Engines Pro Series Chevy LS 427 C.I.D. 600 HP EFI Base Dressed Long Block Crate Engines
BluePrint Engines Pro Series Chevy LS 427 c.i.d. 600 hp Holley Terminator X EFI base dressed engines are a finely tuned symphony of power and precision, delivering a robust 600 hp and 530 lb.-ft. of torque, with a crisp 11:1 compression ratio. At its foundation lies BluePrint's high-strength cast iron LSX-style block, built to handle serious performance demands. Inside, forged pistons and a forged crank ensure durability and strength under high rpms, while the hydraulic roller cam and LS3 aluminum heads optimize airflow and valve timing for maximum efficiency. The LS3 fabricated intake manifold and fuel rail system provides a sleek, high-flow path for fuel delivery, complemented by a modern drive-by-wire throttle body for precise control. Managing it all is the Holley Terminator X Max, offering advanced tuning and seamless integration for street or track dominance. This setup isn't just built to run--it's built to roar. Block specs: * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. bore * 6-bolt main Rotating assembly specs: * BluePrint forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * BluePrint forged pistons * Internally balanced front and rear BluePrint aluminum cylinder heads specs: * 69cc chamber * 2.165 in. intake/1.590 in. exhaust valves * 259cc intake/102cc exhaust runners BluePrint hydraulic roller cam specs: * .624 in. intake/.624 in. exhaust lift * 239 degrees intake/255 degrees exhaust duration at .050 in. lift * 114 degree lobe separation Also includes: * LS3 fabricated intake manifold and fuel rail * Drive-by-Wire throttle body * Retro fit oil pan * Water pump * Spark plugs and wires * Harmonic balancer * Timing cover * Valve covers * Coil packs * Injectors Holley Terminator X Max features and benefits: * Real time fuel map learning simplifies tuning * On-board Bosch LSU 4.9 wideband control enables accurate AFR readings and closed loop tuning * Eight high-impedance injector drivers ideal for stock LS and Holley EFI injectors * Integrated 1-Bar MAP sensor for naturally aspirated or nitrous setups, with harness support for external higher bar sensors, if needed * Four configurable inputs (12 V, Ground, 5 V, Frequency) and two outputs (Ground, PWM) * Free PC Tuning Software via USB/CAN Interface for Full Laptop Control and Advance Setup * Integrated 3.5 in. touch screen handheld with Setup Wizard, internal data logging, and real time gauge displays * Terminator X Max ECU includes base timing map pre-configured for this engine
Not Yet Reviewed
$15,099.99
BluePrint Engines Pro Series Chevy LS 376 C.I.D. 525 HP EFI Deluxe Dressed Long Block Crate Engines
BluePrint Engines Pro Series Chevy LS 376 c.i.d. 525 hp Holley Terminator X EFI deluxe dressed engines are a masterclass in modern performance and reliability, delivering a robust 525 hp and 460 lb.-ft. of torque, with a 10.7:1 compression ratio that ensures streetable power and high-output efficiency. At the heart of this Pro Series engine are BluePrint's premium components, all working in concert with a nodular iron crankshaft, each chosen for strength and precision. Air and fuel management are handled by the Holley Terminator X Max system paired with a fabricated aluminum intake manifold, high-flow injectors, and a matching fuel rail kit. Tying it all together is a black or polished pulley kit delivering both form and function in a sleek, performance-ready package. Select the engine with the pulley finish preferred for your vehicle. Block specs: * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0622 in. bore * 6-bolt main Rotating assembly specs: * Nodular iron crankshaft * 3.622 in. stroke * 6.098 in. connecting rods with 150,000 psi bolts * BluePrint hypereutectic pistons * Internally balanced front and rear BluePrint LS3 aluminum cylinder heads specs: * 69cc chamber * 2.165 in. intake/1.590 in. exhaust valves * 259cc intake/102cc exhaust runners BluePrint hydraulic roller cam specs: * .612 in. intake/.585 in. exhaust lift * 225 degrees intake/238 degrees exhaust duration at .050 in. lift * 113 degree lobe separation Also includes: * LS3 fabricated aluminum intake manifold * Drive-by-Wire throttle body adds modern responsiveness * LS swap oil pan ensures seamless integration * Injectors and fuel rail kit * Spark plugs and wires * Harmonic balancer * Throttle pedal * Timing cover * Valve covers * Coil packs * Black or polished pulley kit: -- LS2-style water pump -- One-wire 140-amp alternator -- Peanut-style air conditioning compressor -- Type II power steering pump with remote reservoir Holley Terminator X Max features and benefits: * Real time fuel map learning simplifies tuning * On-board Bosch LSU 4.9 wideband control enables accurate AFR readings and closed loop tuning * Eight high-impedance injector drivers ideal for stock LS and Holley EFI injectors * Integrated 1-Bar MAP sensor for naturally aspirated or nitrous setups, with harness support for external higher bar sensors, if needed * Four configurable inputs (12 V, Ground, 5 V, Frequency) and two outputs (Ground, PWM) * Free PC Tuning Software via USB/CAN Interface for Full Laptop Control and Advance Setup * Integrated 3.5 in. touch screen handheld with Setup Wizard, internal data logging, and real time gauge displays * Terminator X Max ECU includes base timing map pre-configured for this engine
Not Yet Reviewed
$13,799.99
—
$13,899.99
BluePrint Engines Pro Series Chevy LS 427 C.I.D. 600 HP EFI Deluxe Dressed Long Block Crate Engines
BluePrint Engines Pro Series Chevy LS 427 c.i.d. 600 hp Holley Terminator X EFI deluxe dressed engines are a masterclass in modern muscle, pushing out a robust 600 hp and 530 lb.-ft. of torque, with a crisp 11:1 compression ratio. BluePrint's high-strength cast iron LSX-style block is fortified with forged pistons and a forged crank for uncompromising durability and high-rpm stability. The LS3 aluminum heads and hydraulic roller cam work in harmony to maximize airflow and valve timing. Fuel and air are fed through a sleek LS3 fabricated intake manifold and fuel rail system, with a drive-by-wire throttle body ensuring precise control. The Holley Terminator X Max system brings advanced engine management to the table, making tuning and diagnostics seamless. Tying it all together is a black or polished pulley kit delivering function and flair. Choose the engine with the pulley finish preferred for your build. Block specs: * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0685 in. bore * 6-bolt main Rotating assembly specs: * BluePrint forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * BluePrint forged pistons * Internally balanced front and rear BluePrint aluminum cylinder heads specs: * 69cc chamber * 2.165 in. intake/1.590 in. exhaust valves * 259cc intake/102cc exhaust runners BluePrint hydraulic roller cam specs: * .624 in. intake/.624 in. exhaust lift * 239 degrees intake/255 degrees exhaust duration at .050 in. lift * 114 degree lobe separation Also includes: * LS3 fabricated aluminum intake manifold * Drive-by-Wire throttle body adds modern responsiveness * LS swap oil pan ensures seamless integration * Injectors and fuel rail kit * Spark plugs and wires * Harmonic balancer * Throttle pedal * Timing cover * Valve covers * Coil packs * Black or polished pulley kit: -- LS2-style water pump -- One-wire 140-amp alternator -- Peanut-style air conditioning compressor -- Type II power steering pump with remote reservoir Holley Terminator X Max features and benefits: * Real time fuel map learning simplifies tuning * On-board Bosch LSU 4.9 wideband control enables accurate AFR readings and closed loop tuning * Eight high-impedance injector drivers ideal for stock LS and Holley EFI injectors * Integrated 1-Bar MAP sensor for naturally aspirated or nitrous setups, with harness support for external higher bar sensors, if needed * Four configurable inputs (12 V, Ground, 5 V, Frequency) and two outputs (Ground, PWM) * Free PC Tuning Software via USB/CAN Interface for Full Laptop Control and Advance Setup * Integrated 3.5 in. touch screen handheld with Setup Wizard, internal data logging, and real time gauge displays * Terminator X Max ECU includes base timing map pre-configured for this engine
Not Yet Reviewed
$17,099.99
—
$17,199.99
BluePrint Builder Series LS376/530HP Standard Edition EFI Crate Engine and TKX Trans Combos
BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX trans combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a TKX manual transmission and pulley kit (pulley kit is an optional add-on, depending on the specific engine package you purchase). The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX trans combos. Other product features, items, and specifications: Block: * BluePrint Engines High Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 6-bolt main Rotating Assembly: * Nodular Iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced (front and rear) Cylinder Heads: * BluePrint aluminum PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft Specs: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift – 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Assembled TKX 5-speed Transmission Package: * McLeod Super Street Pro twin-disc clutch * Hydraulic throw-out bearing * Bell housing * Billet flywheel * Starter * Gear ratios are 2.87:1 (first), 1.89:1 (second), 1.28:1 (third), 1.00:1 (fourth), and 0.68:1 (fifth) Other Components: * MLL-BLS3763KBTKX and MLL-BLS3763KTKX include front accessory drive with LT1 style 150-amp alternator, LT1 Style water pump, Type II power steering pump with baffled edges, and compact style A/C compressor * Holley Terminator X Max - Gen IV Complete ECU/Harness EFI System * BluePrint Engines fuel injectors and rail * Low-profile swap oil pan * DBW throttle body * Loaded intake manifold * Spark plugs and wires * Harmonic balancer * Coil packs Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF and Dyno calibration are maintained with the above ECU / tuning. Engine/Trans Package Ships assembled.
Not Yet Reviewed
$20,399.99
—
$22,799.99
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster