Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Crate Engines, Short Blocks, Engine & Transmission Combos
Showing In Stock Items. Show All 37 Items.
BluePrint Engines 350 C.I.D. Cruiser Fully Dressed Crate Engines
BluePrint Engines 350 c.i.d. Cruiser fully dressed crate engines make an great choice for daily drivers and cruising. These fully dressed engines make up to 18 in. of vacuum and work excellent with power brakes, stock torque converter and stock gearing and they will run on 87 octane fuel. Details and specs: * 341 hp/371 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating Assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder Heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners Roller Cam specs: * .477 intake/.471 exhaust * 202 intake/212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Harmonic balancer * Spark plugs * Spark plug wires * Standard rotation long style water pump * Waterneck and thermostat * Fuel pump * Oil pan * Timing cover * Aluminum intake * HEI distributor * 600 cfm carburetor * Dyno test results shipped with engine
( 29 )
$6,199.00
—
$8,199.00
BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block Crate Engines
BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block crate engines are available with fuel injection—and base or deluxe carbureted models. SPECIFICATIONS FOR ALL MODELS INCLUDE: * HP and Torque: 390 hp / 410 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum Heads * Hydraulic Roller Cam * Cast Iron Crankshaft * Hypereutectic Pistons * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Aluminum intake HEI distributor Dyno test results shipped with engine 30 month / 50,000 warranty INCLUDED ONLY WITH FUEL INJECTION MODEL BP3505CTF: * EFI system INCLUDED ONLY WITH BASE CARBURETED MODEL BP3505CTC: * 670 cfm carburetor INCLUDED ONLY WITH DELUXE CARBURETED MODEL BP3505CTCD: * Harmonic balancer * Spark plugs * Spark plug wires * Standard Rotation Long Style Water Pump * Waterneck and Thermostat * Fuel Pump * 670 cfm carburetor
( 11 )
$5,899.00
—
$6,999.00
BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block Crate Engines with Fuel Injection
BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block crate engines with fuel injection are offered in two models—one with new block casting, pulleys, and other extras. SPECIFICATIONS FOR BOTH MODELS INCLUDE: * HP and Torque: 390 hp / 410 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum Heads * Hydraulic Roller Cam * Cast Iron Crankshaft * Hypereutectic Pistons * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Harmonic Balancer Thermostat and Water neck Aluminum intake HEI distributor Spark plugs and wires EFI system Dyno test results shipped with engine INCLUDED ONLY ON MODEL BP3505CTFD: * Standard rotation long water pump INCLUDED ONLY ON NEW BLOCK CASTING MODEL BP3505CTFK: * Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump (does not fit Corvette)
( 1 )
$7,399.00
—
$9,399.00
BluePrint Builder Series 383/436HP Standard Edition EFI Crate Engine and 700R4 Transmission Combos
BluePrint Builder Series 383/436HP Standard Edition EFI crate engine and 700R4 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy small block-compatible 383 (c.i.d.) engine that produces 436 horsepower, this standard edition builder series includes a polished pulley kit and 700R4 automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and steel crankshaft. Altogether, this assembly produces 443 lbs.-ft. of torque. When you need or want a new powertrain for your GM ride, go with the authority in crate engines and their BluePrint Builder Series 383/436HP Standard Edition EFI crate engine and 700R4 transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Bore is 4.000 in. * Main caps are 4-bolt * One-piece rear main seal Rotating Assembly: * Cast steel crankshaft * Stroke – 3.750 in. * OEM-style 5.700 in. connecting rods * Hypereutectic pistons * Weighted 8 in. harmonic balancer (BPP400L) Cylinder Heads: * BluePrint H8002K performance models (0.500 in. raised port vs. OEM) * Chamber – 64cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 195cc intake and 75cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.544 in. * Exhaust valve lift – 0.555 in. * Intake duration at 0.050 in. of lift – 230 * Exhaust duration at 0.050 in. of lift - 236 * Lobe separation angle (LSA) – 110 degrees Ignition Timing * Initial is 10-16 degrees * Total is 32-34 degrees * Firing order is 1-8-4-3-6-5-7-2 Automatic Transmission Package: * Complete 700R4 package * Torque converter with 2,200 – 2,400 rpm stall * Weighted flexplate (one-piece, RMS) * Starter * Due to numerous tire/rear gear combinations, this transmission does not ship with a speedometer gear or sender housing Other Components: * Dual plane aluminum intake manifold with satin finish * Complete EFI system with pump kit * Spark plugs and wires (with separators) * Valve covers, oil pan, and timing cover * Oil filter * Front accessory drive with polished finish (includes A/C and power steering) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Factory 5 applications require a special order (please call). Recommended fuel is 91 octane. Recommended oil is BPP710. Not designed for EGR compatibility.
Not Yet Reviewed
$18,599.00
BluePrint Builder Series 632/815HP Standard Edition EFI Crate Engine and 4L80E Transmission Combos
BluePrint Builder Series 632/815HP Standard Edition EFI crate engine and 4L80E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy big block-compatible 632 (c.i.d.) engine that produces 815 horsepower, this standard edition builder Pro Series includes a polished pulley kit and 4L80E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 775 lbs.-ft. of torque. When you need or want a new powertrain for your GM ride, go with the authority in crate engines and their BluePrint Builder Series 632/815HP Standard Edition EFI crate engine and 4L80E transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Bore is 4.600 in. * Main caps are 4-bolt * One-piece rear main seal * Mechanical fuel pump provision * Tall deck (approximately 0.400 in. taller and wider than OEM block) Rotating Assembly: * New BluePrint forged crankshaft * Stroke – 4.750 in. * Forged H-beam 6.635 in. connecting rods * Forged pistons * Internal balance * Non-weighted harmonic balancer Aluminum Cylinder Heads: * BluePrint PS8012 performance models (0.300 in. raised exhaust port vs. OEM) * Chamber – 119cc * Valves are 2.300 in. intake and 1.880 in. exhaust * Exhaust runners are 358cc intake and 125cc exhaust * Builder must verify clearance of exhaust, shift linkage, steering components, etc. before ordering Camshaft: * Hydraulic roller * Intake valve lift – 0.698 in. * Exhaust valve lift – 0.698 in. * Intake duration at 0.050 in. of lift – 272 * Exhaust duration at 0.050 in. of lift - 282 * Lobe separation angle (LSA) – 110 degrees Ignition Timing * Initial is 10-16 degrees (16-20 degrees for Dominator-style carburetors) * Total is 32-34 degrees (by 2,500 rpm for Dominator-style carburetors) * Firing order is 1-8-4-3-6-5-7-2 Automatic Transmission Package: * Complete 4L80E package with electronic controller (lockup capability) * Torque converter with 3,800–4,200 rpm stall * Non-weighted flexplate * Starter * Gear ratios are 2.482:1 (first), 1.482:1 (second), 1.000:1 (third), 0.750:1 (fourth), 2.077:1 (reverse) Other Components: * Single plane aluminum intake manifold with satin finish * Complete EFI system with Aeromotive A1000 fuel pump * Valve covers, oil pan, and timing cover * Pro Billet distributor * Front accessory drive with polished finish (includes alternator, A/C, power steering, water pump, pulleys, and belts) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Recommended fuel is 91 octane. Recommended oil is BPP710. Not designed for EGR-compatibility.
Not Yet Reviewed
$30,999.00
BluePrint Builder Series 302W/365HP Bronco Edition Carbureted Crate Engine and 4R70W Trans Combos
BluePrint Builder Series 302W/365HP Bronco Edition carbureted crate engine and 4R70W transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Ford small block-compatible 302 (c.i.d.) engine that produces 365 horsepower, this Bronco edition builder series includes a black pulley kit and 4R70W automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and steel crankshaft. Altogether, this assembly produces 365 lbs.-ft. of torque. When you need or want a new powertrain for your Ford Bronco, go with the authority in crate engines and their BluePrint Builder Series 302W/365HP Bronco Edition carbureted crate engine and 4R70W transmission combos. Other product features, items, and specifications include: Block: * New BluePrint high-strength cast iron * Increased deck thickness and strength webbing * Priority main oiling * Main caps are 4-bolt * Improved water jacket design * One-piece rear main seal Rotating Assembly: * Cast steel crankshaft * Stroke – 3.000 in. (and forged 5.090 in. connecting rods) * Hypereutectic pistons * Externally balanced BPP50 harmonic balancer Cylinder Heads: * BluePrint HP9009 models * Chamber – 60cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 190cc intake and 60cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.533 in. * Exhaust valve lift – 0.544 in. * Intake duration at 0.050 in. of lift – 215 * Exhaust duration at 0.050 in. of lift - 220 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * Initial is 10-16 degrees * Will be 34 degrees total at 3,500 rpm * Total is 32-34 degrees * Firing order is 1-3-7-2-6-5-4-8 Complete 4WD-ready 4R70W Transmission (built to 650 horsepower): * Electronic transmission controller (TPS not included due to variable installations) * Torque converter with 2,200 – 2,600 rpm stall * Flexplate * Starter * This 4-speed overdrive transmission with lockup is specifically prepped for a 1966-76 Dana 20 transfer case (sold separately) * Gear ratios are 2.84:1 (first), 1.55:1 (second), 1.00:1 (third), 0.70:1 (overdrive), and 2.32:1 (reverse) Other Components: * Dual plane aluminum intake manifold with satin finish * Carburetor (600 cfm) * Distributor * Valve covers * Rear sump oil pan * Billet aluminum front accessory drive with black finish (includes A/C and power steering) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Recommended fuel is 91 octane. Recommended oil is non-synthetic 10W30. Not designed for EGR compatibility.
Not Yet Reviewed
$18,699.00
BluePrint Builder Series 427W/541HP Cobra Edition EFI Crate Engine and TKX Transmission Combos
BluePrint Cobra Edition Builder Series combos pair engine and transmission, eliminating guesswork, making it easier to gain the performance you desire. These combos match a fuel injected Ford small block-compatible 427 c.i.d. engine with a TKX manual transmission enabling the production of 541 hp and 519 lb.-ft. of torque with a compression ratio of 10:1. BluePrint high-strength cast iron engine block: * 4.125 in. bore * 4-bolt main * One-piece rear main seal * 9.500 deck height Rotating assembly: * Forged crankshaft * Stroke: 4.000 in. * Forged 6.250 in. connecting rods * Forged pistons * Internally balanced Aluminum cylinder heads: * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 205cc intake/70cc exhaust runners Hydraulic roller camshaft: * .608 in. intake/.608 in. exhaust valve lift * 248 intake/258 exhaust duration at .050 in. of lift * 114 degrees lobe separation angle (LSA) TKX transmission package: * Mcleod Super Street Pro single disc clutch * Hydraulic throwout bearing * Steel bellhousing * Billet flywheel * Starter -- First gear ratio: 2.87:1 -- Second gear ratio: 1.89:1 -- Third gear ratio: 1.28:1 -- Fourth gear ratio: 1.00:1 -- Fifth gear ratio: 0.81:1 Also included: * Ribbed Cobra-style aluminum valve covers * Holley Sniper 2 EFI system * Aluminum oval air cleaner with Cobra Script * Harmonic balancer * Thermostat and thermostat housing * EFI fuel pump kit * Timing cover * Oil filter * Powdercoated oil pan * Spark plugs and wires * Plug wire separators * Polished front accessory drive: -- Driver side standard rotation water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut air conditioning compressor
Not Yet Reviewed
$28,499.00
BluePrint Builder Series 302W/370HP Standard Edition Crate Engine and 4R70W Transmission Combos
BluePrint Builder Series 302W/370HP Standard Edition crate engine and 4R70W transmission combos take away the hassle of properly pairing a carbureted Ford 302 Windsor mild performance engine and 4-speed automatic transmission for your build. These strong assemblies deliver 370 horsepower and 350 lbs.-ft. of torque with BluePrint aluminum cylinder heads and hydraulic roller camshaft to go with hypereutectic pistons, a steel crankshaft, and OEM-style connecting rods. The front accessory drive includes air conditioning and power steering provisions for the high strength cast iron block which features increased deck thickness and strength webbing. When you are looking for a new powertrain, go with the authority in crate engines and order your very own BluePrint Builder Series 302W/370HP Standard Edition crate engine and 4R70W transmission combo. More product features and details include: * Compression ratio of 9.5:1 * Camshaft offers 0.543 in. intake and 0.544 in. exhaust lift with 215 intake and 228 exhaust duration at 0.050 in. lift and a 112 LSA * Stroke is 3.000 in. with 5.090 in. long connecting rods * Block is a one-piece rear main seal, 4-bolt main setup with improved water jacket design * Ford rotating assembly is machined and balanced by BluePrint (50 oz. external balance) * BluePrint HP9009 cylinder heads provide a 60cc combustion chamber, 2.020 in. intake and 1.600 in. exhaust valves, plus 190cc intake/60cc exhaust runners * Ignition timing is 34 degrees total at 3,500 rpm * This combo also includes the 600 cfm carburetor, fuel pump, dual plane satin finished aluminum intake manifold, water pump, spark plugs/wires, valve covers, distributor (bronze gear not recommended), harmonic balancer, thermostat with housing, and a painted oil pan * Spark plug model BPP7938 NGK 7938 BKR5E (0.750 in. reach, 14mm thread, 5/8 in. hex, plug; gapped to 0.035 in.) * Harmonic balancer model BPP50 (50 oz., 6.4 in. diameter) Transmission features and details include: * Electronic transmission controller * Overdrive 4-speed with lockup built to 650 horsepower * Torque converter with 2,200-2,600 rpm advertised stall rating * Flexplate (50 oz. weighted) and starter * Gear ratios are 2.84:1 (first), 1.55:1 (second), 1.00:1 (third), 0.70:1 (overdrive), and 2.32:1 (reverse) * May require modifications/replacement of driveshaft, transmission mounts, exhaust routing, etc. * Throttle position sensor not included due to base setup being used for both carbureted and EFI versions Other notes: * Factory Five applications are a special order * Recommended fuel is 91 octane and recommended break-in oil is BPP710 * Initial timing is 10-16 degrees * Total timing is 32-34 degrees * Firing order is 1-3-7-2-6-5-4-8 * Painted Ford Blue * Not for EGR * Recommended headers include those made by Ultimate Headers, Hedman Husler race headers, and Sanderson headers
Not Yet Reviewed
$18,499.00
BluePrint Builder Series 408/465HP Standard Edition Carbureted Crate Engine/A727 Transmission Combos
BluePrint's Standard Edition Builder Series combos pair engine and transmission, eliminating guesswork and making it easier to gain the performance you desire. These combos match a carbureted Chrysler small block-compatible 408 c.i.d. engine with a 727 automatic transmission enabling the production of 465 hp and 494 lb.-ft. of torque with a compression ratio of 10:1. They are offered with a polished or black pulley kit. Select the one you like best. Block: * Hand-picked seasoned Magnum block * Square and parallel decked * Align honed main bearing bore * Cylinders honed within .0002 straightness and roundness * Cylinders are sonic tested for thickness * Mechanical fuel pump provision * 4.040 in. bore * 2-bolt main * 2-piece rear main seal Rotating assembly: * Cast crankshaft * Stroke: 4.000 in. * Forged Magnum 6.123 in. connecting rods with 150,000 psi bolts * Forged pistons * Externally balanced front and rear Cylinder heads: * BluePrint Engines assembled and machined Edelbrock casting * Aluminum Magnum-pattern cylinder heads--58cc chamber * Aluminum roller rockers * 2.02 in. intake/1.60 in. exhaust valves * 176cc intake/75cc exhaust runners Camshaft: * Roller * .544 in. intake/.541 in. exhaust valve lift * 236 intake/242 exhaust duration at .050 in. of lift * 110 degrees lobe separation angle (LSA) Ignition timing: * 34degrees total at 4,000 rpm 727 transmission: * 10 in. torque converter * 2,200 to 2,600 stall Also included: * Holley 750cfm classic carburetor * Distributor * Thermostat and thermostat housing * Fuel pump and fuel lines * Spark plugs and wires * Harmonic balancer * Valve covers * Timing cover * Air cleaner * Starter * Oil pan * Polished or black front accessory drive: -- Water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut-style air conditioning compressor
Not Yet Reviewed
$16,599.00
BluePrint Builder Series 598/741HP Standard Edition Carbureted Crate Engine and 4L80E Trans Combos
BluePrint Standard Edition Builder Series combos pair engine and transmission, eliminating guesswork, making it easier to gain the performance you desire. These combos match a carbureted GM big block-compatible 598 c.i.d. engine with a 4L80E automatic transmission enabling the production of an awesome 741 hp and 703 lb.-ft. of torque with a compression ratio of 10.5:1. They are available with a polished or black pulley kit. Select the one preferred. BluePrint high-strength cast iron engine block: * 4.600 in. bore * 4-bolt main * One-piece rear main seal * Standard deck * Mechanical fuel pump provision Rotating assembly: * BluePrint forged crankshaft * Stroke: 4.500 in. * Forged 6.480 in. connecting rods * Forged pistons * Internally balanced front and rear BluePrint aluminum cylinder heads: * 119cc chamber * 2.30 in. intake/1.88 in. exhaust valves * 358cc intake/125cc exhaust runners * .300 in. raised exhaust port vs. an OEM casting * Verify header/exhaust clearance Hydraulic roller camshaft: * .647 in. intake/.647 in. exhaust valve lift * 258 intake/266 exhaust duration at .050 in. of lift * 112 degrees lobe separation angle (LSA) Ignition timing: * 38 degrees total timing 4L80E automatic transmission package: * Electronic transmission controller * Lockup capability * 3,800+ stall torque converter * Flexplate * Starter Also included: * Holley 1250cfm carburetor * Intake manifold * Pro Series Ready Run distributor * Electric fuel pump * Harmonic balancer * Thermostat and thermostat housing * Valve covers * Spark plugs and wires * Timing cover * Oil pan * Polished or black front pulley kit: -- Reverse rotation short water pump -- Type II power steering pump with remote reservoir -- 140-amp one-wire alternator
Not Yet Reviewed
$26,699.00
BluePrint Builder Series 347W/415HP Mustang Edition EFI Crate Engine and 4R70W Transmission Combos
BluePrint Builder Series 347W/415HP Mustang Edition EFI crate engine and 4R70W transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Ford small block-compatible 347 (c.i.d.) engine that produces 415 horsepower, this Mustang edition builder series includes a polished pulley kit and 4R70W automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and steel crankshaft. Altogether, this assembly produces 415 lbs.-ft. of torque. When you need or want a new powertrain for your Ford Mustang, go with the authority in crate engines and their BluePrint Builder Series 347W/415HP Mustang Edition EFI crate engine and 4R70W transmission combos. Other product features, items, and specifications include: Block: * New BluePrint high-strength cast iron * Increased deck thickness and strength webbing * Priority main oiling * Main caps are 4-bolt * Improved water jacket design * One-piece rear main seal Rotating Assembly: * Cast steel crankshaft * Stroke – 3.400 in. * Forged I-beam 5.400 in. connecting rods * Forged pistons * Externally balanced BPP28 harmonic balancer Cylinder Heads: * BluePrint HP9009 models * Chamber – 60cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 190cc intake and 65cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.543 in. * Exhaust valve lift – 0.554 in. * Intake duration at 0.050 in. of lift – 218 * Exhaust duration at 0.050 in. of lift - 226 * Lobe separation angle (LSA) – 112 degrees Ignition Timing * Initial is 10-16 degrees * Will be 34 degrees total at 3,500 rpm * Total is 32-34 degrees * Firing order is 1-3-7-2-6-5-4-8 Complete 4R70W Transmission (built to 650 horsepower): * Electronic transmission controller and TPS breakout harness for integration with controller and EFI * Torque converter with 2,200 – 2,600 rpm stall * Flexplate * Starter * This is a 4-speed overdrive transmission with lockup * Gear ratios are 2.84:1 (first), 1.55:1 (second), 1.00:1 (third), 0.70:1 (overdrive), and 2.32:1 (reverse) Other Components: * Dual plane aluminum intake manifold with satin finish * Complete fuel injection system * Pro Billet distributor * Mustang valve covers (scripted "Mustang" may not match images; based on availability) * Oil pan with 7-quart capacity * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Factory 5 applications are a special order (must call). Recommended fuel is 91 octane. Recommended oil is non-synthetic 10W30. Not designed for EGR compatibility.
Not Yet Reviewed
$21,899.00
