Crate Engines, Short Blocks, Engine & Transmission Combos

Summit Bucks

Chevrolet Performance ZZ502 C.I.D. Deluxe Long Block Crate Engines

Here, at last, is the king of all big block crate engines from Chevrolet Performance. These 502 cu. in. engines are available unassembled or fully assembled. Each version makes extensive use of aluminum to keep weight down—including aluminum heads, intake, water pump, and valve covers. Additionally, ZZ502 c.i.d. deluxe long block crate engines are full of heavy-duty parts, such as: forged aluminum pistons, forged shot-peened steel connecting rods with 7/16 in. bolts, forged steel crankshaft, 14 in. automatic transmission flexplate, 4-bolt main blocks, stainless steel valves, 6 qt. oil pan, and windage trays. The complete Chevrolet Performance engine kits come with Gen 6 four-bolt main blocks with one-piece rear main seals. Hydraulic roller camshaft specs are: .527 in. intake lift, .544 in. exhaust lift; the duration at .050 in. for intake is 224, and 234 for exhaust with a 112-degree lobe centerline. Other features include a single roller timing chain, aluminum large oval port, and 110cc combustion chambered heads. Intake runner volume is 290cc; stainless steel valves are installed, with 2.25 in. intake side and 1.88 in. on the exhaust side. Valve springs are rated at 140 lbs. closed and 368 lbs. open, good for up to .680 in. lift. These heads have exhaust crossovers. Aluminum high-rise dual-plane square bore bolt pattern intake manifolds and an 870 cfm carburetor are also included.

4.0 out of 5 stars ( 4 )

$14,846.00

Summit Bucks

Chevrolet Performance ZZ632/1000 Deluxe Long Block Crate Engines

Chevrolet Performance's ZZ632/1000 deluxe long block crate engines are their biggest and baddest big blocks! They start with a tall deck Sportsman Bowtie block and an all-forged roller assembly, then add a hydraulic roller camshaft and high-flow spread-port CNC-machined cylinder heads derived from Pro Stock racing technology. The RS-X design cylinder heads feature symmetrical ports to produce similar power from all eight cylinders. ZZ632 crate engines have a crank-trigger ignition system with coil-near-plug ignition coils mounted on a unique valley plate. Included is a pre-programmed, self-learning control system for precise fuel control and amazing output on premium pump gas. These big block engines reach peak power at 6,600 rpm and rev to a recommended maximum of 7,000 rpm. Technical specs: * Bore and stroke: 4.600 in. by 4.750 in. * Power is 1,004 hp at 6,600 rpm * Torque is 876 lbs.-ft. at 5,600 rpm * Cast iron block with 4-bolt mains * Forged 4340 steel crankshaft * Forged steel H-beam connecting rods * Forged aluminum 2618 alloy pistons * Aluminum high-rise single-plane intake manifold * Dominator 4500-style throttle body * 86 lb.-hr. fuel injectors * Billet steel hydraulic roller camshaft * Valve lift of 0.780 in. intake and 0.782 in. exhaust * Camshaft duration at 0.050 in. is 270 intake and 287 exhaust * Aluminum RS-X symmetrical spread-port cylinder heads with 70cc chambers * Titanium 2.450 in. intake/1.800 in. exhaust valves with a 5/16 in. stem * 58X reluctor crank-triggered, coil-near-plug ignition * Compression ratio of 12.0:1 * Forged aluminum shaft-mount roller rocker arms with 1.8:1 ratio * Aluminum water pump * Steel 8-quart oil pan * Recommended fuel: 93 octane or higher

5.0 out of 5 stars ( 2 )

$32,935.35

Chevrolet Performance LS3 6.2L 376 C.I.D 525 HP Engine Assemblies

Chevrolet Performance LS3 6.2L 376 c.i.d. engine assemblies use an impressive 10.7:1 compression ratio to put out 525 hp at 6,200 rpm and 486 lbs.-ft. of torque at 5,200 rpm. They feature a cast aluminum block with a nodular iron crankshaft, powdered metal connecting rods, and hypereutectic pistons. The steel hydraulic roller camshaft has a .525 in. intake and .525 in. exhaust valve lift, with a 226 degree intake and 236 degree exhaust valve duration at .050 in. cam lift. Assemblies also include: * Ignition coil packs * Spark plug wires * Spark plugs * Intake manifold * Fuel injectors * Throttle body * Exhaust manifolds * 14 in. flexplate * Front timing cover * Aluminum water pump * Harmonic balancer * Passenger side right hand dipstick and tube

Not Yet Reviewed

$12,081.17

Summit Bucks

Ford Performance Parts 2024 Gen 4 5.0L 480 HP Coyote Long Block Crate Engines

Ford Performance Parts 2024 Gen 4 5.0L 480 hp Coyote engines are the latest all-aluminum crate engines from the 2024 Mustang GT. These modern 5.0L 32-valve DOHC V8s use advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow cylinder heads, dual throttle bodies, and a heightened compression ratio to deliver 480 hp and 415 lb.-ft. of torque (with premium fuel). These lightweight plasma-transferred wire-arc spray aluminum cylinder blocks feature cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, and an optimized oil drain back and windage control to improve high-rpm performance. Available with production flexplate (automatic) or dual mass flywheel (manual) and both include engine harness. Engine specs: * 480 hp at 7,150 rpm * 415 lb.-ft. of torque at 4,900 rpm * 12.0:1 compression ratio * Bore 93mm x stroke 92.7mm * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on BOSS 302 Mustang * Forged steel crankshaft * Aluminum block with plasma transferred wire arc spray weld liner coating * Longer, 12mm head bolts for higher clamp load * 9.5 qt capacity steel oil pan * Tuned composite intake manifold provides efficient air delivery and weight savings * Twin 80mm single bore drive-by-wire, electronic throttle bodies with variable runner control * High-flow aluminum cylinder heads, dual overhead camshaft (DOHC), four valves per cylinder, variable intake and exhaust camshaft timing * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * Mustang GT 409 stainless steel tubular exhaust manifold on the RIGHT SIDE ONLY

5.0 out of 5 stars ( 1 )

$11,366.99

—

$11,701.99

ATK High Performance Ford 302 375 HP Stage 2 Long Block Crate Engines

Bring your ride to life with ATK High Performance Ford 302 375 hp Stage 2 long block crate engines. These engines are based on the tried and true Ford 302 and are built to perform. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Mechanical fuel pump provision * Dual sump oil pan HP08C, Front sump oil pan HP78C * Melling high volume oil pump * Double roller timing set * Left Hand inlet reverse rotation water pump (HP08C) * Right Hand inlet standard rotation water pump (HP78C) * 50oz external balancer * TCI 529610 157 tooth flexplate with 50oz balance * Edelbrock Performer RPM dual plane intake 7121 * Pro Billet distributor with melonite gear Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 34-36 degrees total timing * 13726548 firing order * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires * 680 cfm carburetor * Mechanical 80 GPH Fuel pump * 2,400-2,800 Stall converter * 91 plus octane fuel

3.0 out of 5 stars ( 2 )

$5,866.99

ATK High Performance Chrysler 360 Magnum 350 HP Complete Long Block Crate Engines

ATK High Performance Chrysler 360 Magnum 350 HP complete long block crate engines incorporate Engine Quests upgraded casting with the following benefits: * Thicker deck for greater strength * Improved design resists cracking * Superior port finish for increased flow * Water flow redesigned for greater thermal conductivity * Hardened exhaust seats * CNC-machined guides and seats Engine specifications: * HP: 350 * TQ: 430 * Block: OE Magnum roller block 1993-2001 * Bore/stroke: 4.040 in. x 3.580 in. * Displacement: 360 cu. in. * Crankshaft: OE cast * Rods: OE 6.123 in. * Pistons: Hypereutectic 9.3:1 compression * Rings: Chromoly * Camshaft: Hydraulic roller * Cam specs: 207/217 at 50 .496/.496 112 LSA * Timing chain: Double roller * Cylinder heads: New upgraded Engine Quest cast iron 62cc/172cc 1.78/1.50 * Rocker arms: Steel 1.6 pedestal rockers * Oil pan: 5 qt. OE front sump * Oil pump: Melling STD volume * Balancer: Externally balanced * Intake manifold: Edelbrock performer RPM air gap dual plane * Distributor: Pro billet RTR (Iron Gear) * Water pump: OE early pump * Carburetor: Quick Fuel 680 cfm vacuum secondary's electric choke * Fuel pump: Holley mechanical 110 gph * Spark plugs: Autolite * Spark plug wires: 8mm

Not Yet Reviewed

$6,898.99

Summit Bucks

Ford Performance Parts 572 C.I.D 655 HP Long Block Crate Engines

Big blocks are back! Ford Performance Parts 572 c.i.d. 655 hp long block crate engines are, once again, ready to make impressive power with excellent drivability—while utilizing premium, unleaded pump gas. They're available with front or rear sump pan. Specs for the Ford 572 c.i.d. long block crate engines: * 655 hp at 5,500 rpm * 710 lbs.-ft. torque at 4,500 rpm * Engine type: 385 Series big block * Bore x stroke: 4.500 in. bore x 4.500 in. stroke * Ford Performance A460 big block * Forged steel crankshaft * Forged steel H-beam connecting rods and bolts * Pistons with floating wrist pins * Hydraulic roller camshaft - Lift: .649 in. - Duration: Intake--259 degrees at .050 in. lift/exhaust--263 degrees at .050 in. lift * Ford Performance aluminum cylinder heads - Dual valve springs with damper - Stainless steel 2.20 in. diameter intake valves - Stainless steel 1.76 in. diameter exhaust valves * Compression ratio: 10.0:1 (nominal) * Required fuel: Premium unleaded * Stainless steel roller rockers * Multi-index timing chain set * Heavy-duty, aluminum body oil pump * SFI-approved vibration damper * Front or rear sump oil pan * Intake manifold * 870 cfm carburetor * Distributor * High performance water pump * Ford Performance Blue 9mm spark plug wires * Note: Built with current available parts

Not Yet Reviewed

$16,835.99

—

$18,367.99

ATK High Performance Chrysler 360 Magnum 350 HP Base Long Block Crate Engines

ATK High Performance Chrysler 360 Magnum 350 HP base long block crate engines incorporate Engine Quests upgraded casting with the following benefits: * Thicker deck for greater strength * Improved design resists cracking * Superior port finish for increased flow * Water flow redesigned for greater thermal conductivity * Hardened exhaust seats * CNC-machined guides and seats Engine specifications: * HP: 350 * TQ: 430 * Block: OE Magnum roller block 1993-2001 * Bore/stroke: 4.040 in. x 3.580 in. * Displacement: 360 cu. in. * Crankshaft: OE cast * Rods: OE 6.123 in. * Pistons: Hypereutectic 9.3:1 compression * Rings: Chromoly * Camshaft: Hydraulic roller * Cam specs: 207/217 at 50 .496/.496 112 LSA * Timing chain: Double roller * Cylinder heads: New upgraded Engine Quest cast iron 62cc/172cc 1.78/1.50 * Rocker arms: Steel 1.6 pedestal rockers * Oil pan: 5 qt. OE front sump * Oil pump: Melling STD volume (does not come with an oil pump driveshaft)

Not Yet Reviewed

$4,098.99

ATK High Performance Chevy 383 Stroker 470 HP Mid-Dress Long Block Crate Engines

Looking for an engine that puts out big power and sounds flat out NASTY!? You will find those features and more with ATK High Performance Chevy 383 Stroker 470 hp long block crate engines. Engine includes: * Intake manifold: Weiand Stealth dual plane * Harmonic balancer: PowerBond 8 in. internal balance * Distributor: MSD GM HEI distributor * Includes a GM long water pump Specifications: * Horsepower: 470 hp at 5,200 rpm * Torque: 490 lb.-ft. at 4,800 rpm * Block: Seasoned GM 4-bolt main with one-piece seal and passenger side dipstick * Crankshaft: Scat nodular iron * Connecting rods: Scat 4340 Forged I-beam with ARP 8740 bolts * Pistons: Forged * Piston rings: Moly rings * Compression ratio: 10:1 compression * Camshaft: Hydraulic roller * Camshaft specifications: 224/236 duration at .050 and .591in/.591ex lift with a 108 degree lobe separation * Cylinder heads: Dart SHP aluminum 72 cc chamber with 2.02 in. intake and 1.60 in. exhaust valves * Rocker arms: Billet 1.6 ratio aluminum roller rockers * Oil pan: Original-style 5-quart pan * Oil type: 10W30 * Recommended plug gap: 0.035 in. * Water pump: Designed to use a long water pump * Fuel type: Dyno testing was done using 91 octane fuel * A 2,500 rpm+ torque converter is recommended for best results * Engine will not produce enough vacuum for power brakes

Not Yet Reviewed

$5,898.99

ATK High Performance Chevy LQ4 6.0L 505 HP Long Block Crate Engines

ATK High Performance Chevy LQ4 6.0L 505 hp long block crate engines are designed to be a performance upgrade for LS-based vehicles or perfect for a 2001-07 Chevy Truck LQ4 or LS swap in a hot rod. Expect big mid- to upper-end power, with a noticeable idle. (For optimal performance, you'll need headers, chassis dyno tune, and 36 lb. injectors. Engine specifications: * Horsepower: 505 * Torque: 480 * Block: OE LQ4/6.0L Iron * Bore/Stroke: Up to 4.040 in. x 3.622 in. * Displacement (cu.in.): Up to 371 * Crankshaft: OE GM 24-tooth reluctor wheel * Rods: OE powder metal or stock GM * Pistons: Hypereutectic 10:1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: OE cathedral port aluminum 71cc/210cc 2.00/1.55 * Rocker arms: 1.7 ratio * Oil pump: Melling STD volume * Engine info: -- Oil: Conventional / Non-Synthetic 10W30 -- Oil Filter: Wix or K&N -- Timing: Set to factory specifications via PCM module -- Spark Plug Gap: .040 in. -- Firing Order: 18726543 -- Octane: 91+ -- Stall Converter: 1800+ -- Exhaust: 1 5/8 + Headers (Per application – Larger diameter will make more power) * NOTES: This engine replaces the 2001-07 Chevy 6.0L LQ4 engine. ECM MUST BE TUNED; not doing so can damage the engine. A PCV valve must be run. You must also run an air-oil separator system such as the Moroso 85487 to capture the excess crankcase vapors LS engines are known for. If you are not running a MAP sensor, the MAP timing option in the timing control box must be zeroed out all the way across. Failure to do so will allow the controller to add timing which can lead to detonation. You must also run some sort of a steam line kit that dumps to your water pump, radiator or radiator hose; ATK recommends a 4-corner setup like the Trick Flow TFS-306SB601. This allows air pockets/hot spots to escape the heads and can also be used to purge out trapped air when filling the radiator for the first time.

3.0 out of 5 stars ( 2 )

$5,198.99

Ford Performance Parts 363 C.I.D. 500 HP Boss Long Block Crate Engines

Ford Performance Parts has taken their popular 302 based stroker engines and built them into these Ford Performance Parts 363 c.i.d. 500 hp Boss long block crate engines. They accomplished this by maxing out 347 stroker engine blocks with a 4.125 in. bore, giving you 363 cubic inches of Ford power! Ford engineers designed these Z363 engines to work both on the street and the strip with a strong torque curve that delivers over 390 lbs.-ft. of torque from 3,500 to the 6,500 rpm redline. Additional technical specifications: * 500 hp at 6,500 rpm * 450 ft.-lbs. at 5,300 rpm * Boss 302 block with 8.200 in. deck height * 4.125 in. bore x 3.400 in. stroke * Forged steel crankshaft * Forged steel I-beam connecting rods * 10.1:1 compression ratio * Forged pistons with floating wrist pins, * Hydraulic roller camshaft and lifters * Valve lift (in.): 0.580 intake/0.602 exhaust * Duration at .050 in. of lift: 232 intake/240 exhaust * Ford Performance Parts aluminum Z2 cylinder heads * Exhaust port raised 5/8 in.; may require custom headers * 2.05 in. intake and 1.60 in. exhaust valves * Roller rocker arms with 1.65 ratio * Ford Performance Parts cast aluminum valve covers; fit most non-EFI applications * SFI-approved harmonic balancer; may require spacer for pulley alignment * 7-quart high performance oil pan with windage tray and scraper * Available with front or rear sump oil pan and pickup * Aluminum high performance water pump * Internally balanced; use neutral balance flywheel (sold separately) * Ignition timing recommended, 32 degrees BTDC at 4,000 rpm * Maximum recommended rpm: 6,500 * Timing cover will work with most standard rotation water pumps * Fuel pump eccentric installed; allows use of mechanical fuel pump * Intake manifold not included * Includes intake gaskets and pilot bearing * Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W firing order) * Distributor sold separately * Steel distributor gear required * Shipping weight approximately 500 lbs. * Engine power rating based on long tube headers, Edelbrock intake manifold Super Victor with 750 Holley carburetor and 1 in. spacer * Built with currently available parts; photo and specifications may vary

5.0 out of 5 stars ( 1 )

$11,457.99

—

$12,973.99

ATK High Performance Chrysler 360 Magnum 320 HP Stage 3 Long Block Crate Engines

Street cruisers really can't ask for more than they'll find in ATK high performance Chrysler 360 320 hp Stage 3 long block crate engines. They're packed with the finest, well-matched components, so you can drop the engine into your project and fire it up. ATK has outfitted the blocks as completely as possible to save you time and headaches. These complete Stage 3 long blocks typically include carburetion, spark plug wires, and plugs. ATK Chrysler 360 engines include: * Seasoned OE Magnum block * OE-cast crankshaft * OE steel connecting rods * Hypereutectic pistons * Piston rings * Hydraulic roller camshaft * Magnum 65cc cylinder heads * Steel rocker arms 1.6 pedestal * Brass freeze plugs installed and sealed * Oil galley plugs installed and sealed

4.0 out of 5 stars ( 3 )

$5,798.99

ATK High Performance GM LM7 5.3L with AFR Heads 500 HP Base Long Block Crate Engines

ATK specializes in muscle with quality internal parts and dyno-proven combinations. These LM7-based GM 5.3L long block crate engines are fitted with AFR cylinder heads that help produce a stout 500 hp and 440 lbs.-ft. of torque. They are ready to go with your matching intake manifold, headers, and a tune. The motors are built around an OE iron block with internal balance and either the 24x or 58x reluctor setup (part number dependent). This proven street/strip foundation likes 91+ octane and a 2,200+ rpm stall rating for a torque converter on automatic transmission builds. Make every road a thunder road with the ATK High Performance GM LM7 5.3L with AFR heads 500 hp base long block crate engine best suited for your application! More product features, items, and specifications include: * Bore/stroke up to 3.903 in. x 3.622 in. * Displacement up to 347 c.i.d. * Crankshaft - GM 24-tooth reluctor wheel for the HP116; GM 58-tooth reluctor wheel for the HP116-G4 * Connecting rods – OE-style powder-metal * Pistons - hypereutectic style helps create a 10.1:1 compression ratio * Piston rings – moly-style * Camshaft - hydraulic roller with custom performance grind * Timing chain – OE-style single roller * Cylinder heads - AFR CNC-ported aluminum with 59cc chambers and 200cc intake runners * Valves - 2.000 in. intake/1.570 in. exhaust * Rocker arms – OE-style 1.7 ratio with trunnion upgrades * Oil pump - Melling M295

Not Yet Reviewed

$5,199.99

—

$5,556.99

Chevrolet Performance LS3 525 RLB 376/533 Racing Long Block Crate Engines

Chevrolet Performance's 525 RLB is based on the LS engine family and is like the 6.2L CT525 but sold as a sealed long block for universal racing sanctioning bodies. The high-revving 525 RLB crate engine is assembled with strong forged pistons and heavy-duty connecting rod bolts designed to support its performance capability and enhance its durability. With its deep-breathing LS3 rectangular-port cylinder heads, it is a combination rated at 533 horsepower at 6,600 rpm and a strong 477 lbs.-ft. of torque at 5,200 rpm, when used with a 4-barrel carburetor and intake manifold, per Chevrolet Performance testing. The engine assembly comes with coil-on-plug ignition and an SFI-certified balancer, along with a 6-quart racing oil pan and more. All that's needed to complete the assembly is an induction and ignition system—and those components are also available from Chevrolet Performance (*refer to installation information noted below). *Installation Notes: Requires addition of induction and ignition control system, starter, fuel system, exhaust system and front accessory drive system The 6-quart racing oil pan is designed to clear most GM rear-steer chassis with stock engine location. The long block is designed for universal racing sanctioning bodies. It is not intended for street use. The 525RLB does not included water pump, intake manifold or factory exhaust manifolds. Chevrolet Performance Racing Long Block engines include factory-installed anti-tampering seals. Technical Specifications: * Engine Type: LS-Series Gen IV Small-Block V-8 * Displacement (cu. in.): 376 (6.2L) * Bore x Stroke (in.): 4.065 x 3.62 (103.25 x 92mm) * Block: Cast aluminum with 6-bolt, cross-bolted main caps * Crankshaft: Nodular iron * Connecting Rods: Powder metal with ARP bolts * Piston: Forged aluminum * Camshaft Type: Hydraulic roller * Valve Lift (in): .525 intake / .525 exhaust * Camshaft Duration (@.050 in): 226° intake / 236° exhaust * Cylinder Heads: LS3 rectangular port; aluminum as-cast with 68cc chambers * Valve Size (in): 2.165 intake / 1.590 exhaust * Compression Ratio: 10.7:1 Nominal * Rocker Arms (P/N: 12696105 int.): Investment-cast, roller trunnion * Rocker Arms (P/N: 12681275 exhaust): Investment-cast, roller trunnion * Rocker Arm Ratio: 1.7:1 * Recommended Fuel: Premium pump * Maximum Recommended rpm: 6,700 * Reluctor Wheel: 58x * Balanced: Internal

Not Yet Reviewed

$11,756.51

Chevrolet Performance LT1 6.2L E-Rod Long Block Crate Engines

Chevrolet Performance LT1 6.2L E-Rod long block crate engines have it all. They're architecturally similar to the LS family of small block engines, but with a unique block casting, cylinder head design, oiling system, and more. LT1 engines also combine advanced technologies—including direct-injection and continuously variable valve timing to support an advanced combustion system. Offered with a wet-sump or dry-sump oiling system, the Chevy E-Rod engine systems include the specially designed engine controller for retro-fit applications and harness needed to get the engine running. Engine specs and features: * Cast aluminum with 6-bolt nodular iron main bearing caps * Direct-injection, spark-ignition Gen-V small block V8 * Horsepower: 455 at 6,000 rpm * Torque: 465 lbs.-ft. at 4,600 rpm * Crankshaft: Forged steel * Connecting rods: Forged powdered metal * Pistons: Eutectic * Camshaft type: Billet steel roller * Valve lift (in.): .561 intake/.531 exhaust * Camshaft duration (at 0.050 in.): 200 degrees intake/212 degrees exhaust * Cylinder heads: Aluminum, rectangular port D/I * Valve size (in.): 2.13 intake/1.59 exhaust * Compression ratio: 11.5:1 * Rocker arms: Investment-cast, roller trunnion * Rocker arm ratio: 1.81:1 * Recommended fuel: Premium pump * Maximum recommended rpm: 6,600 * Reluctor wheel: 58x * Balanced: Internal * Engine control module * Exhaust manifolds * Catalytic converters * Mass airflow sensor and sensor boss * Oxygen sensors and sensor bosses * Air filter * Accelerator pedal * Evaporative emissions canister * Instruction manual

Not Yet Reviewed

$12,803.20

—

$13,458.59

Chevrolet Performance HT502 Long Block Crate Engines

Chevrolet Performance HT502 long block crate engines offer tremendous value and performance. They're based on the Gen VI 4-bolt mains with one-piece rear main seal blocks. Features include: * Approximately 8.75:1 compression * 406 hp at 4,200 rpm * 541 lbs.-ft. of torque at 3,200 rpm * 4.000 in. stroke, forged steel, externally balanced crankshafts * Forged steel connecting rods * Forged aluminum pistons * Hydraulic roller camshafts with .480 in. intake lift, .483 in. exhaust lift, 204 intake and 209 exhaust duration at .050 in., and 112 degree lobe centerline * Cast iron cylinder heads with oval port 118cc combustion chambers * 275cc intake runner volume with 2.07 in. intake valves and 1.73 in. exhaust * Configured for 3/8 in. thread 7/16 in. shank rocker arm studs * Stamped steel, self-aligning, 1.7:1 ratio rocker arms * ACDelco spark plugs * Oil pans * Black powdercoated aluminum valve covers and timing covers * 8 in. harmonic balancers * 14 in. automatic flexplates

5.0 out of 5 stars ( 1 )

$9,141.38

Chevrolet Performance LS3 6.2L 376 C.I.D 495 HP Engine Assemblies

The hot new small block V8 in the GM lineup is the hyper-aggressive LS3 6.2L 376 c.i.d. 495 hp engine assembly from Chevrolet Performance. It offers a high-revving 376 c.i.d. combination that represents generations of small block V8 development and engineering. Not only is the LS3 an amazing engine in its stock configuration, but with those high-flowing rectangular port cylinder heads, the LS3 is loaded with potential. To tap into this, the engineers at GM Performance Parts offer you the LS376/480—an LS3 with an upgraded camshaft that boosts power by a whopping 50 hp! The LS376/480 comes with the same great features as the LS3 crate engine. The bottom-end includes a 6-bolt aluminum block, nodular crank, high performance rods, and 10.7:1 pistons. The heads are high-flowing rectangular-port L92 units that have been upgraded with high-revving, hollow-stem valves. The same EFI intake manifold feeds the hungry engine, while 1.7:1 roller rockers work with the upgraded camshaft. The GM Performance Parts engineers picked the LS Hot Cam (P/N 88958733) to take the LS3 to the next level. This cam specs out with .525 in. intake and exhaust valve lift. Duration (at .050 in.) is 219 degrees intake and 228 degrees exhaust, which allows for a dramatic increase in power. The engine will idle and cruise just like an LS3, but the power increase is there whenever you need it. A 14 in. automatic flexplate is included. Specifications: * Engine type: LS Series Gen IV small block V8 * 495 hp at 6,200 rpm, 473 lbs.-ft. torque at 5,000 rpm * Displacement: 376 cubic inch (6.2L) * Bore x Stroke (in.): 4.06 x 3.62 (103.25 x 92mm) * Block: Cast-aluminum with 6-bolt, cross-bolted main caps * Crankshaft: Nodular iron * Connecting rods: Powdered metal * Pistons: Hypereutectic aluminum * Camshaft type: Hydraulic roller * Valve lift: .525 in. intake / .525 in. exhaust * Camshaft duration (at .050 in): 219 degrees intake / 228 degrees exhaust * Cylinder heads: Aluminum L92 style port; as cast with 68cc chambers * Valve size: 2.165 int / 1.59 exhaust * Compression ratio: 10.7:1 * Rocker arms: Investment-cast, roller trunnion * Rocker arm ratio: 1.7:1 * Recommended fuel: 92 octane * Maximum recommended RPM: 6600 * Reluctor wheel: 58X * Balanced: Internal

Not Yet Reviewed

$11,012.44

Mopar Performance 6.2L Supercharged Hemi Crate Engines

Mopar Performance 6.2L Supercharged Hemi crate engines exert a monstrous 707 hp and 650 lbs.-ft. of torque. These complete Hellcrate engine assemblies includes water pump, flywheel and clutch, front sump oil pan, intake manifold with throttle body, fuel injectors and coil packs. You've asked for it and Mopar delivered. Features and specs include: * 376 cu. in. * 103.9mm bore * 90.9mm stroke * Cast iron block with 4-bolt powder metal main caps * Forged steel crank material * Connecting rods and floating pins with diamond-like coating * Forged piston material * Nodular iron camshaft * Valve/lift duration at 0.15mm: Intake--14.25(0.561)mm, 278 degrees, hollow stems Exhaust--14.0(0.551)mm, 304 degrees, sodium-filled stems * 356 aluminum, HEMIspherical chamber cylinder heads * 54.3mm intake valve size * 42mm exhaust valve size * 9.5:1 compression ratio * 6,200 max rpm

Not Yet Reviewed

$17,834.99

Chevrolet Performance LS3 6.2L 376 C.I.D 430 HP Fully Dressed Long Block Crate Engines

Chevrolet Performance LS3 6.2L 376 c.i.d. 430 hp long block crate engines use an impressive 10.7:1 compression ratio to put out 430 hp at 5,900 rpm and 425 lbs.-ft. of torque at 4,600 rpm. They feature a cast aluminum engine block with a nodular iron crankshaft, powdered metal connecting rods, and hypereutectic pistons. The steel hydraulic roller camshaft has a .551 in. intake and .522 in. exhaust valve lift with 204 degrees intake and 211 degrees exhaust valve duration at .050 in. cam lift. Long block crate engines also include: * Ignition coil packs * Spark plug wires * Spark plugs * Intake manifold * Fuel injectors * Throttle body * Front timing cover * Aluminum water pump * Harmonic balancer * Passenger side right hand dipstick and tube

Not Yet Reviewed

$10,504.48

Summit Bucks

Chevrolet Performance 5.7L 350 C.I.D Turnkey Long Block Crate Engines

This Chevrolet Performance 5.7L 350 c.i.d. HO turnkey long block crate engine is assembled with brand new components from General Motors. Starting with a new GM 4-bolt main block, it includes the cast iron high-flow Vortec heads, dual-plane aluminum intake manifold, 9.0:1 compression ratio, and a hydraulic flat tappet camshaft that provides you 333 hp and 381 lbs.-ft. of torque. It includes a GM HEI distributor, a 670 cfm Holley carburetor, and is shipped with a 153-tooth small diameter flexplate. Engine specs: * Block: Cast Iron, 4-bolt main caps, 1-piece rear seal * Compression Ratio: 9.1:1 * Crankshaft: Cast Nodular, 3.480 in. Stroke * Duration at 0.050 I/E: 212 / 222 * Camshaft Lift: 0.435 in. / 0.460 in. Hydraulic Flat Tappet * Heads, Chamber Size: Vortec iron, 64cc * Horsepower: 330 hp at 5,000 rpm * Intake Manifold: Aluminum Dual Plane * Torque: 380 lbs.-ft. at 3,800 rpm * Valves (I/E) (in.): 1.940 / 1.600 * Condition: New

Not Yet Reviewed

$7,311.30

Summit Bucks

Chevrolet Performance LSX 454 Long Block Crate Engines

Chevrolet Performance LSX 454 long block crate engines are built with an all-forged, super-tough rotating assembly and feature a pair of new deep-breathing LSX 6-bolt cylinder heads. They also come dressed with great looking, all-new orange powdercoated valve covers with an engraved LSX 454 logo. With a carburetor and high-flow Chevrolet Performance intake manifold (sold separately), these engines are good for about 627 hp and 586 lbs.-ft. of torque. Due to the number of application variations, the LSX 454 crate engines do not include an oil pan, and the valve covers do not include provisions for mounting the ignition coil brackets. Other specifications include: * 4.185 in. bore * 4.125 in. stroke * Cast iron LSX Series block with cross-bolted 6-bolt main caps * Forged steel crankshaft * Forged steel connecting rods * Forged aluminum 11.0:1 compression pistons * Hydraulic roller camshaft * 0.635 in. lift intake/0.635 in. lift exhaust, 236 intake/246 exhaust duration at .050 in. lift * Aluminum LSX-LS7 cylinder heads with 70cc chambers * 1.8:1 aluminum roller rocker arms * 58-tooth reluctor wheel

4.0 out of 5 stars ( 1 )

$16,836.20

Chevrolet Performance ZZ427/480 HP Long Block Crate Engines

Chevrolet Performance has recreated the classic L88 Big Block combination in the ZZ427/480 long block crate engine. Rated at 480 hp, it features an iron block, forged steel crankshaft, and high-flow aluminum cylinder heads. An upgraded hydraulic roller camshaft improves drivability and rpm range, while lower 10.1:1 compression means you can enjoy the power on pump gas, too. The ZZ427 comes complete with: high-flow oval port heads, a high-lift camshaft, aluminum intake manifold, 770 cfm Holley carburetor, an HEI distributor, aluminum water pump, balancer, spark plug wires, and a 14 in. flexplate. If you're looking for a modern version of the classic L88, the Chevrolet Performance ZZ427/480 long block crate engine is the answer. Additional specs and features include: * 4.250 in. bore with 3.750 in stroke * Cast iron block with 4-bolt main caps * Forged steel crankshaft * Forged steel connecting rods * Forged aluminum pistons * Hydraulic roller camshaft: - Valve lift .527 in. intake/.544 in. exhaust - Duration (.050 in) 224 intake/ 234 exhaust * Aluminum oval port heads with 110cc chambers * 2.190 in. intake/1.880 in. exhaust valves * 10.1:1 compression ratio * Aluminum 1.7:1 ratio roller rocker arms * HEI distributor * 770 cfm carburetor * Aluminum short water pump * Ignition timing base 10 degrees BTDC, 36 degrees total * 6,400 maximum recommended rpm

3.6 out of 5 stars ( 5 )

$16,940.27

Summit Bucks

Ford Performance Parts 5.0L Coyote Gen 4X Crate Engines

Ford Performance Parts 5.0L Coyote Gen 4X crate engines are modern 5.0L 32-valve DOHC V8s that utilize advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow aluminum cylinder heads, and 12:1 compression to deliver 460 hp and 420 lb.-ft. of torque (with premium fuel). The all-aluminum cylinder block features plasma transferred arc spray-in liners, cross-bolted main bearing caps, and thick main bearing bulkheads for strength. Ford's Gen 4X 5.0L Coyote features a single 80mm throttle body for easier packaging in various applications. Features and specs: * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on the Boss 302 Mustang * Forged steel crankshaft * Single 80mm "drive-by-wire" throttle body * 9.5 qt. steel oil pan * Composite lightweight intake manifold * Mustang GT 409 stainless steel exhaust manifold—right side only * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * 10R80 flexplate included * Engine weight: 445 lbs. without front accessory drive components Note: Driver side exhaust flange utilizes 5.2L pattern

Not Yet Reviewed

$11,704.99

Summit Bucks

Ford Performance Parts 2024 7.3L Super Duty Long Block Crate Engine

Ford Performance Parts 7.3L V8 Ford gasoline crate engine from the 2024 F250 Super Duty is loaded with great features for your build. Features: * 7.3L displacement * Bore 107.2mm x stroke 101.0mm * 430 hp at 5,500 rpm * 485 lb.-ft. of torque at 4,000 rpm * 10.5:1 compression * Cast iron block * Aluminum cylinder heads * Intake valve diameter 55.13mm * Exhaust valve diameter 42.53mm * Lift (intake/exhaust) 13.67mm/15.26mm * Cam-in-block OHV design with variable cam timing * Forged steel crankshaft * Cast aluminum pistons * Port fuel injection * Firing order: 1-5-4-8-6-3-7-2 Each engine assembly includes: * Composite intake manifold * 87mm throttle body * Left and right exhaust manifolds * 8-qt. aluminum oil pan/cooler * Ignition coils and wires * Production flexplate * Factory lift brackets * M-6038-73 shipping and storage cradle * Bellhousing bolt pattern same as 4.6/5.4 and 5.0 Coyote * Engine weight: 580 lbs.

Not Yet Reviewed

$8,797.99