Crate Engines, Short Blocks, Engine & Transmission Combos

Chevrolet Performance ZZ502 C.I.D. Deluxe Long Block Crate Engines

Here, at last, is the king of all big block crate engines from Chevrolet Performance. These 502 cu. in. engines are available unassembled or fully assembled. Each version makes extensive use of aluminum to keep weight down—including aluminum heads, intake, water pump, and valve covers. Additionally, ZZ502 c.i.d. deluxe long block crate engines are full of heavy-duty parts, such as: forged aluminum pistons, forged shot-peened steel connecting rods with 7/16 in. bolts, forged steel crankshaft, 14 in. automatic transmission flexplate, 4-bolt main blocks, stainless steel valves, 6 qt. oil pan, and windage trays. The complete Chevrolet Performance engine kits come with Gen 6 four-bolt main blocks with one-piece rear main seals. Hydraulic roller camshaft specs are: .527 in. intake lift, .544 in. exhaust lift; the duration at .050 in. for intake is 224, and 234 for exhaust with a 112-degree lobe centerline. Other features include a single roller timing chain, aluminum large oval port, and 110cc combustion chambered heads. Intake runner volume is 290cc; stainless steel valves are installed, with 2.25 in. intake side and 1.88 in. on the exhaust side. Valve springs are rated at 140 lbs. closed and 368 lbs. open, good for up to .680 in. lift. These heads have exhaust crossovers. Aluminum high-rise dual-plane square bore bolt pattern intake manifolds and an 870 cfm carburetor are also included.

4.0 out of 5 stars ( 4 )

$14,846.00

Chevrolet Performance ZZ632/1000 Deluxe Long Block Crate Engines

Chevrolet Performance's ZZ632/1000 deluxe long block crate engines are their biggest and baddest big blocks! They start with a tall deck Sportsman Bowtie block and an all-forged roller assembly, then add a hydraulic roller camshaft and high-flow spread-port CNC-machined cylinder heads derived from Pro Stock racing technology. The RS-X design cylinder heads feature symmetrical ports to produce similar power from all eight cylinders. ZZ632 crate engines have a crank-trigger ignition system with coil-near-plug ignition coils mounted on a unique valley plate. Included is a pre-programmed, self-learning control system for precise fuel control and amazing output on premium pump gas. These big block engines reach peak power at 6,600 rpm and rev to a recommended maximum of 7,000 rpm. Technical specs: * Bore and stroke: 4.600 in. by 4.750 in. * Power is 1,004 hp at 6,600 rpm * Torque is 876 lbs.-ft. at 5,600 rpm * Cast iron block with 4-bolt mains * Forged 4340 steel crankshaft * Forged steel H-beam connecting rods * Forged aluminum 2618 alloy pistons * Aluminum high-rise single-plane intake manifold * Dominator 4500-style throttle body * 86 lb.-hr. fuel injectors * Billet steel hydraulic roller camshaft * Valve lift of 0.780 in. intake and 0.782 in. exhaust * Camshaft duration at 0.050 in. is 270 intake and 287 exhaust * Aluminum RS-X symmetrical spread-port cylinder heads with 70cc chambers * Titanium 2.450 in. intake/1.800 in. exhaust valves with a 5/16 in. stem * 58X reluctor crank-triggered, coil-near-plug ignition * Compression ratio of 12.0:1 * Forged aluminum shaft-mount roller rocker arms with 1.8:1 ratio * Aluminum water pump * Steel 8-quart oil pan * Recommended fuel: 93 octane or higher

5.0 out of 5 stars ( 2 )

$32,935.35

Ford Performance Parts 2024 Gen 4 5.0L 480 HP Coyote Long Block Crate Engines

Ford Performance Parts 2024 Gen 4 5.0L 480 hp Coyote engines are the latest all-aluminum crate engines from the 2024 Mustang GT. These modern 5.0L 32-valve DOHC V8s use advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow cylinder heads, dual throttle bodies, and a heightened compression ratio to deliver 480 hp and 415 lb.-ft. of torque (with premium fuel). These lightweight plasma-transferred wire-arc spray aluminum cylinder blocks feature cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, and an optimized oil drain back and windage control to improve high-rpm performance. Available with production flexplate (automatic) or dual mass flywheel (manual) and both include engine harness. Engine specs: * 480 hp at 7,150 rpm * 415 lb.-ft. of torque at 4,900 rpm * 12.0:1 compression ratio * Bore 93mm x stroke 92.7mm * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on BOSS 302 Mustang * Forged steel crankshaft * Aluminum block with plasma transferred wire arc spray weld liner coating * Longer, 12mm head bolts for higher clamp load * 9.5 qt capacity steel oil pan * Tuned composite intake manifold provides efficient air delivery and weight savings * Twin 80mm single bore drive-by-wire, electronic throttle bodies with variable runner control * High-flow aluminum cylinder heads, dual overhead camshaft (DOHC), four valves per cylinder, variable intake and exhaust camshaft timing * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * Mustang GT 409 stainless steel tubular exhaust manifold on the RIGHT SIDE ONLY

5.0 out of 5 stars ( 1 )

$11,051.99

—

$11,701.99

ATK High Performance Chrysler 360 Magnum 350 HP Complete Long Block Crate Engines

ATK High Performance Chrysler 360 Magnum 350 HP complete long block crate engines incorporate Engine Quests upgraded casting with the following benefits: * Thicker deck for greater strength * Improved design resists cracking * Superior port finish for increased flow * Water flow redesigned for greater thermal conductivity * Hardened exhaust seats * CNC-machined guides and seats Engine specifications: * HP: 350 * TQ: 430 * Block: OE Magnum roller block 1993-2001 * Bore/stroke: 4.040 in. x 3.580 in. * Displacement: 360 cu. in. * Crankshaft: OE cast * Rods: OE 6.123 in. * Pistons: Hypereutectic 9.3:1 compression * Rings: Chromoly * Camshaft: Hydraulic roller * Cam specs: 207/217 at 50 .496/.496 112 LSA * Timing chain: Double roller * Cylinder heads: New upgraded Engine Quest cast iron 62cc/172cc 1.78/1.50 * Rocker arms: Steel 1.6 pedestal rockers * Oil pan: 5 qt. OE front sump * Oil pump: Melling STD volume * Balancer: Externally balanced * Intake manifold: Edelbrock performer RPM air gap dual plane * Distributor: Pro billet RTR (Iron Gear) * Water pump: OE early pump * Carburetor: Quick Fuel 680 cfm vacuum secondary's electric choke * Fuel pump: Holley mechanical 110 gph * Spark plugs: Autolite * Spark plug wires: 8mm

Not Yet Reviewed

$6,898.99

ATK High Performance Chrysler 360 Magnum 350 HP Base Long Block Crate Engines

ATK High Performance Chrysler 360 Magnum 350 HP base long block crate engines incorporate Engine Quests upgraded casting with the following benefits: * Thicker deck for greater strength * Improved design resists cracking * Superior port finish for increased flow * Water flow redesigned for greater thermal conductivity * Hardened exhaust seats * CNC-machined guides and seats Engine specifications: * HP: 350 * TQ: 430 * Block: OE Magnum roller block 1993-2001 * Bore/stroke: 4.040 in. x 3.580 in. * Displacement: 360 cu. in. * Crankshaft: OE cast * Rods: OE 6.123 in. * Pistons: Hypereutectic 9.3:1 compression * Rings: Chromoly * Camshaft: Hydraulic roller * Cam specs: 207/217 at 50 .496/.496 112 LSA * Timing chain: Double roller * Cylinder heads: New upgraded Engine Quest cast iron 62cc/172cc 1.78/1.50 * Rocker arms: Steel 1.6 pedestal rockers * Oil pan: 5 qt. OE front sump * Oil pump: Melling STD volume (does not come with an oil pump driveshaft)

Not Yet Reviewed

$4,098.99

ATK High Performance Chevy LQ4 6.0L 505 HP Long Block Crate Engines

ATK High Performance Chevy LQ4 6.0L 505 hp long block crate engines are designed to be a performance upgrade for LS-based vehicles or perfect for a 2001-07 Chevy Truck LQ4 or LS swap in a hot rod. Expect big mid- to upper-end power, with a noticeable idle. (For optimal performance, you'll need headers, chassis dyno tune, and 36 lb. injectors. Engine specifications: * Horsepower: 505 * Torque: 480 * Block: OE LQ4/6.0L Iron * Bore/Stroke: Up to 4.040 in. x 3.622 in. * Displacement (cu.in.): Up to 371 * Crankshaft: OE GM 24-tooth reluctor wheel * Rods: OE powder metal or stock GM * Pistons: Hypereutectic 10:1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: OE cathedral port aluminum 71cc/210cc 2.00/1.55 * Rocker arms: 1.7 ratio * Oil pump: Melling STD volume * Engine info: -- Oil: Conventional / Non-Synthetic 10W30 -- Oil Filter: Wix or K&N -- Timing: Set to factory specifications via PCM module -- Spark Plug Gap: .040 in. -- Firing Order: 18726543 -- Octane: 91+ -- Stall Converter: 1800+ -- Exhaust: 1 5/8 + Headers (Per application – Larger diameter will make more power) * NOTES: This engine replaces the 2001-07 Chevy 6.0L LQ4 engine. ECM MUST BE TUNED; not doing so can damage the engine. A PCV valve must be run. You must also run an air-oil separator system such as the Moroso 85487 to capture the excess crankcase vapors LS engines are known for. If you are not running a MAP sensor, the MAP timing option in the timing control box must be zeroed out all the way across. Failure to do so will allow the controller to add timing which can lead to detonation. You must also run some sort of a steam line kit that dumps to your water pump, radiator or radiator hose; ATK recommends a 4-corner setup like the Trick Flow TFS-306SB601. This allows air pockets/hot spots to escape the heads and can also be used to purge out trapped air when filling the radiator for the first time.

3.0 out of 5 stars ( 2 )

$5,198.99

ATK High Performance Chrysler 360 Magnum 320 HP Stage 3 Long Block Crate Engines

Street cruisers really can't ask for more than they'll find in ATK high performance Chrysler 360 320 hp Stage 3 long block crate engines. They're packed with the finest, well-matched components, so you can drop the engine into your project and fire it up. ATK has outfitted the blocks as completely as possible to save you time and headaches. These complete Stage 3 long blocks typically include carburetion, spark plug wires, and plugs. ATK Chrysler 360 engines include: * Seasoned OE Magnum block * OE-cast crankshaft * OE steel connecting rods * Hypereutectic pistons * Piston rings * Hydraulic roller camshaft * Magnum 65cc cylinder heads * Steel rocker arms 1.6 pedestal * Brass freeze plugs installed and sealed * Oil galley plugs installed and sealed

4.0 out of 5 stars ( 3 )

$5,798.99

Ford Performance Parts 572 C.I.D 655 HP Long Block Crate Engines

Big blocks are back! Ford Performance Parts 572 c.i.d. 655 hp long block crate engines are, once again, ready to make impressive power with excellent drivability—while utilizing premium, unleaded pump gas. They're available with front or rear sump pan. Specs for the Ford 572 c.i.d. long block crate engines: * 655 hp at 5,500 rpm * 710 lbs.-ft. torque at 4,500 rpm * Engine type: 385 Series big block * Bore x stroke: 4.500 in. bore x 4.500 in. stroke * Ford Performance A460 big block * Forged steel crankshaft * Forged steel H-beam connecting rods and bolts * Pistons with floating wrist pins * Hydraulic roller camshaft - Lift: .649 in. - Duration: Intake--259 degrees at .050 in. lift/exhaust--263 degrees at .050 in. lift * Ford Performance aluminum cylinder heads - Dual valve springs with damper - Stainless steel 2.20 in. diameter intake valves - Stainless steel 1.76 in. diameter exhaust valves * Compression ratio: 10.0:1 (nominal) * Required fuel: Premium unleaded * Stainless steel roller rockers * Multi-index timing chain set * Heavy-duty, aluminum body oil pump * SFI-approved vibration damper * Front or rear sump oil pan * Intake manifold * 870 cfm carburetor * Distributor * High performance water pump * Ford Performance Blue 9mm spark plug wires * Note: Built with current available parts

Not Yet Reviewed

$18,367.99

Chevrolet Performance LSX 454 Long Block Crate Engines

Chevrolet Performance LSX 454 long block crate engines are built with an all-forged, super-tough rotating assembly and feature a pair of new deep-breathing LSX 6-bolt cylinder heads. They also come dressed with great looking, all-new orange powdercoated valve covers with an engraved LSX 454 logo. With a carburetor and high-flow Chevrolet Performance intake manifold (sold separately), these engines are good for about 627 hp and 586 lbs.-ft. of torque. Due to the number of application variations, the LSX 454 crate engines do not include an oil pan, and the valve covers do not include provisions for mounting the ignition coil brackets. Other specifications include: * 4.185 in. bore * 4.125 in. stroke * Cast iron LSX Series block with cross-bolted 6-bolt main caps * Forged steel crankshaft * Forged steel connecting rods * Forged aluminum 11.0:1 compression pistons * Hydraulic roller camshaft * 0.635 in. lift intake/0.635 in. lift exhaust, 236 intake/246 exhaust duration at .050 in. lift * Aluminum LSX-LS7 cylinder heads with 70cc chambers * 1.8:1 aluminum roller rocker arms * 58-tooth reluctor wheel

4.0 out of 5 stars ( 1 )

$16,836.20

Ford Performance Parts 5.0L Coyote Gen 4X Crate Engines

Ford Performance Parts 5.0L Coyote Gen 4X crate engines are modern 5.0L 32-valve DOHC V8s that utilize advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow aluminum cylinder heads, and 12:1 compression to deliver 460 hp and 420 lb.-ft. of torque (with premium fuel). The all-aluminum cylinder block features plasma transferred arc spray-in liners, cross-bolted main bearing caps, and thick main bearing bulkheads for strength. Ford's Gen 4X 5.0L Coyote features a single 80mm throttle body for easier packaging in various applications. Features and specs: * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on the Boss 302 Mustang * Forged steel crankshaft * Single 80mm "drive-by-wire" throttle body * 9.5 qt. steel oil pan * Composite lightweight intake manifold * Mustang GT 409 stainless steel exhaust manifold—right side only * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * 10R80 flexplate included * Engine weight: 445 lbs. without front accessory drive components Note: Driver side exhaust flange utilizes 5.2L pattern

Not Yet Reviewed

$11,704.99

Chevrolet Performance ZZ427/480 HP Long Block Crate Engines

Chevrolet Performance has recreated the classic L88 Big Block combination in the ZZ427/480 long block crate engine. Rated at 480 hp, it features an iron block, forged steel crankshaft, and high-flow aluminum cylinder heads. An upgraded hydraulic roller camshaft improves drivability and rpm range, while lower 10.1:1 compression means you can enjoy the power on pump gas, too. The ZZ427 comes complete with: high-flow oval port heads, a high-lift camshaft, aluminum intake manifold, 770 cfm Holley carburetor, an HEI distributor, aluminum water pump, balancer, spark plug wires, and a 14 in. flexplate. If you're looking for a modern version of the classic L88, the Chevrolet Performance ZZ427/480 long block crate engine is the answer. Additional specs and features include: * 4.250 in. bore with 3.750 in stroke * Cast iron block with 4-bolt main caps * Forged steel crankshaft * Forged steel connecting rods * Forged aluminum pistons * Hydraulic roller camshaft: - Valve lift .527 in. intake/.544 in. exhaust - Duration (.050 in) 224 intake/ 234 exhaust * Aluminum oval port heads with 110cc chambers * 2.190 in. intake/1.880 in. exhaust valves * 10.1:1 compression ratio * Aluminum 1.7:1 ratio roller rocker arms * HEI distributor * 770 cfm carburetor * Aluminum short water pump * Ignition timing base 10 degrees BTDC, 36 degrees total * 6,400 maximum recommended rpm

3.6 out of 5 stars ( 5 )

$16,940.27

Ford Performance Parts 2024 7.3L Super Duty Long Block Crate Engine

Ford Performance Parts 7.3L V8 Ford gasoline crate engine from the 2024 F250 Super Duty is loaded with great features for your build. Features: * 7.3L displacement * Bore 107.2mm x stroke 101.0mm * 430 hp at 5,500 rpm * 485 lb.-ft. of torque at 4,000 rpm * 10.5:1 compression * Cast iron block * Aluminum cylinder heads * Intake valve diameter 55.13mm * Exhaust valve diameter 42.53mm * Lift (intake/exhaust) 13.67mm/15.26mm * Cam-in-block OHV design with variable cam timing * Forged steel crankshaft * Cast aluminum pistons * Port fuel injection * Firing order: 1-5-4-8-6-3-7-2 Each engine assembly includes: * Composite intake manifold * 87mm throttle body * Left and right exhaust manifolds * 8-qt. aluminum oil pan/cooler * Ignition coils and wires * Production flexplate * Factory lift brackets * M-6038-73 shipping and storage cradle * Bellhousing bolt pattern same as 4.6/5.4 and 5.0 Coyote * Engine weight: 580 lbs.

Not Yet Reviewed

$8,749.99

BluePrint Engines Ford 347 C.I.D. 415 HP Dressed Stroker Long Block Crate Engines

Satisfy your craving for horsepower with BluePrint 347 c.i.d. 415 hp dressed stroker long block crate engines are meticulously-built Blue Oval engines from a solid, reputable company that does the job right and stands behind their work. BluePrint custom-built crate and stroker performance engines are always balanced and dyno-tested to add a lot of muscle to your fun! Plus, they're shipped with the dyno results so you can see the BluePrint difference! So, where will you get your horsepower from? Block: * New BluePrint cast iron block * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 in. straightness and roundness * Cylinders are sonic tested for thickness Rotating assembly: * New cast steel crankshaft * New rods with 150,000 psi bolts * Forged pistons * Moly rings * Balanced rotating assembly * High-volume oil pump * Hydraulic roller camshaft * Heavy-duty, double-roller timing set Cylinder heads: * Aluminum heads * Swirl-polished intake and exhaust valves * Hardened pushrods Plus: * Dual plane, satin aluminum intake manifold * Carburetor * Distributor * Valve covers * Painted oil pan

4.5 out of 5 stars ( 8 )

$8,199.00

—

$10,799.00

ATK Marine Rebuilt Long Block Engines

ATK Marine Engines offers premium-quality rebuilt long block engines specifically for boating applications. These engines are designed to deliver maximum performance and long-term durability for your boat. Order the model recommended for your marine application. ATK Marine rebuilt engines include: * Special marine pistons and rings * Special marine camshaft * Marine gaskets * New intake and exhaust valves * New main, rod, and cam bearings * New valve lifters, rocker nuts, and swivels * Heavy-duty double roller timing chains * Cam sprocket * Crank gear * Freeze plugs

4.4 out of 5 stars ( 45 )

$1,872.50

—

$5,542.99

Ford Performance Parts 302 C.I.D. 340 HP Boss Long Block Crate Engines

Ford Performance Parts 302 c.i.d. 340 hp Boss long block crate engines feature Ford's X2 cylinder heads packaged with the legendary "E" camshaft for use with automatic or manual transmissions. Utilizing forged internals, the X2302E long blocks deliver excellent value and are solid foundations for any performance combination, including forced induction. These crate engines feature race-quality components at competitive pricing. Features and specs for these Ford Boss long block crate engines include: * 302 cu. in. * 340 hp * 9.0:1 compression ratio (nominal) * Forged pistons * Forged steel connecting rods * BOSS 4-bolt main block * Hydraulic roller camshaft, .498 in. lift intake and exhaust, duration at .050 in. is 220 degrees intake and exhaust * Double roller timing chain set * Forged steel crankshaft * Can be used in kit cars, street rods, Mustangs, Fox-bodied cars, and trucks (rear sump pan fits most Fox body cars) * Ford Performance aluminum X2 cylinder heads * Roller rocker arms * Rear sump oil pan and pickup, standard rotation timing cover, reverse rotation water pump, and non-EFI valve covers * Fuel pump eccentric installed * Built with all new parts

2.0 out of 5 stars ( 1 )

$9,907.99

ATK High Performance Chrysler 408 Stroker Magnum 465 HP Stage 3 Long Block Crate Engines

ATK High Performance Chrysler 408 Magnum 465 hp Stage 3 long block crate engines are a great way to upgrade your old Mopar-equipped vehicle. These Magnum-based 408 c.i.d strokers have a lopey idle and great low/mid-range power, just perfect for a muscle car or truck. The technical specs for ATK Chrysler 408 Magnum Stage 3 crate engines are: * Horsepower: 465 hp * Torque: 535 ft.-lbs. * Block: seasoned OE 1993-2001 Magnum block * Bore/stroke: 4.040 x 4.000 * Displacement: 408 c.i.d. * Crankshaft: nodular iron 4.000 in. stroke internally balanced * Connecting Rods: 4340 forged I-beam with ARP 8740 Bolts * Pistons: forged * Piston rings: moly rings * Compression ratio: 10.1:1 compression * Camshaft: Hydraulic roller * Camshaft specifications: 229/233 @.050 in., .520 intake/.515 exhaust * Camshaft bearings: installed and clocked to OEM position * Cylinder heads: Edelbrock Performer RPM aluminum 58cc/176cc 2.02/1.60 * Freeze plugs: brass installed and sealed * Rocker arms: billet aluminum 1.6 full roller * Oil galley plugs: installed and sealed * Oil pan: OE 5 qt. center sump * Weight: 430 lbs.

5.0 out of 5 stars ( 2 )

$9,882.99

BluePrint Engines Pro Series Chevy 427 C.I.D. 540 HP Base Long Block Crate Engines

BluePrint Pro Series 427 c.i.d. base long block crate engines have the muscle that you need to impress. These powerhouses feature a 30-month/50,000-mile warranty and are the perfect choice for drivable and reliable high-end performance. Additionally, the BluePrint Pro Series Chevy 427 c.i.d. base crate engine assemblies are dyno-tested and include the dyno sheets. Pro Series 427 base long blocks feature: * 540 hp, 535 ft.-lb., compression ratio 10.0:1 * BluePrint cast iron block with 4-bolt main --4.125 in. bore --Mechanical fuel pump provision --Passenger side dipstick --Drilled and tapped for clutch linkage * Forged crankshaft and connecting rods * Forged pistons with rings * Internal front/internal rear balanced rotating assembly * BluePrint aluminum cylinder heads --64cc chamber --2.08 in. intake/1.60 in. exhaust valves --220cc intake/67cc exhaust runners * Hydraulic roller cam --.577 intake/.577 exhaust lift --240 intake/248 exhaust duration @ .050 --112 degree lobe separation * Ignition timing --- Initial timing 10 to16 degrees and total timing 32 to 34 degrees * Valve covers, oil pan, and timing cover * Harmonic balancer

Not Yet Reviewed

$9,999.00

Summit Bucks

BluePrint Engines GM 400 C.I.D. 500 HP EFI Stroker Fully Dressed Long Block Crate Engines

BluePrint Engines GM 400 c.i.d. 500 hp EFI stroker fully dressed long block crate engines put down a whopping 500 hp and 473 lbs.-ft. of torque! They feature a 30-month/50,000-mile warranty and are the perfect choice for drivable and reliable high-end performance. Additionally, These assemblies are manufactured under strict tolerances and provide outstanding, consistent results. BluePrint Engines GM 400 c.i.d. 500 hp EFI stroker base fully dressed long blocks crate engines are also dyno-tested and include the dyno sheets. Features include: * BluePrint cast iron block * Cast steel 3.750 in. stroke crankshaft * 5.700 in. long connecting rods * Forged pistons * 10.3:1 compression * Hydraulic roller camshaft, .555 in. lift intake, .576 in. lift exhaust, 236/242 intake/exhaust duration at 0.050 in. lift with 110 degree lobe separation * BluePrint aluminum cylinder heads * Premium single true roller timing set * Dual plane intake manifold

5.0 out of 5 stars ( 1 )

$9,299.00

ATK High Performance GM 350 Vortec 350 HP Stage 2 Long Block Crate Engines

Give your car or truck a little more punch with one of these ATK High Performance GM 350 Vortec 350 hp Stage 2 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure they are great-running, reliable engines that will get you back on the road. Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 *Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump Recommended components: * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers

4.0 out of 5 stars ( 9 )

$3,688.99

Ford Performance Parts 460 C.I.D. 575 HP Small Block Ford Long Block Crate Engines

Ford Performance Parts 460 c.i.d. 575 hp small block Ford long block crate engines put down big-time horsepower and torque from the biggest small block Windsor engine ever. They start off with a Ford Performance Parts Boss 351 block with a 9.500 in. deck height that features a forged steel crankshaft with forged steel H-beam connecting rods attached to forged pistons with floating wrist pins. At the heart of the engines are high port/high-flow Ford Performance Z-heads. Other features include: * 575 hp at 5,500 rpm * 575 lbs.-ft. of torque at 4,700 rpm * Engine type: 351 based small block Ford * 4.150 in. bore x 4.250 in. stroke * Boss 351 9.5 in deck, cast iron block * SCAT forged steel crankshaft * SCAT forged steel H-beam 6.125-inch length connecting rods * Mahle forged pistons with floating wrist pins * Hydraulic roller camshaft * .594 in. intake/.618 in. exhaust lift * 242 degrees intake/248 degrees exhaust duration at .050 in. lift * Ford Performance M-6049-Z304DA aluminum "Z" cylinder heads * 2.02 in. intake/1.60 in. exhaust valves * 10.0:1 compression ratio (nominal) * Ford Performance M-6564-F351 roller rocker arms * 1.65:1 rocker arm ratio * Exhaust port raised 5/8 in.; may require custom headers * Ford Performance M-6316-D302 SFI-approved vibration damper; may require spacer for pulley alignment * Cast aluminum, non-EFI valve covers with silver painted finish * Steel oil pan with deep front (9-qt.) or rear sump (7-qt.) pan with louvered windage tray and crankshaft scraper * Ford Performance M-8501-G351 long type, standard rotation water pump * Ford Performance M-9439-A50 intake manifold gaskets included * Distributor not included; steel distributor gear required * Premium unleaded fuel required * Recommended ignition timing: 32 degrees at 4,000 rpm * Maximum recommended rpm: 5,600 rpm * Internally balanced; use neutral balance flywheel (not included) * Edelbrock Super Victor intake manifold recommended (not included) * Engine power ratings achieved with Edelbrock Super Victor intake, Holley 850 cfm carburetor, and long tube headers * Standard rotation timing cover will work with most standard rotation water pumps * Fuel pump eccentric installed, allows use of mechanical fuel pump * Pilot bearing included * Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W firing order) * 570 lbs. approximate shipping weight * Built with currently available parts * Photo and specifications may vary

3.67 out of 5 stars ( 3 )

$11,593.99

Briggs & Stratton Animal Crate Engines

Performance by design, Animal crate engines by Briggs & Stratton are one of their most popular racing engines--a hidden asset for your next snowcross or kart race. Each Animal racing engine is assembled by master small engine technicians and tested in their skunk-works in Milwaukee, WI. Briggs & Stratton Animal crate engines feature: * Primary use: karting * Dual ball bearing, racing-reinforced cylinder * Squeeze-cast, T-7 treated racing rod * Ground cam with compression release * High-silicon valve springs * PVL digital ignition system * Racing-only intake port * Walbro round (slide carburetor) * Dana Fire-Ring head gasket * Racing crankshaft with induction-hardened crankpin * Federal Mogul cam ground, barrel-faced piston * Chrome-faced, racing-only ring package * Nitrited dished exhaust valve * Automotive 3-piece valve retainer system * Beefy rocker arm stud nuts

5.0 out of 5 stars ( 2 )

$759.00

Chevrolet Performance SP350 385 HP Turn-Key Long Block Crate Engines

You can now get modern street performance in a classic small block package by installing a Chevrolet Performance SP350 385 HP turn-key crate engine. They put out 385 HP and 405 lbs.-ft. of torque for a thrilling feeling of immediate performance. The long block crate engines feature new lightweight aluminum cylinder heads based on the proven Fast Burn design—with large intake runners, and 2 in. diameter intake and 1.55 in. exhaust valves. New beehive-style valve springs enable greater high-rpm performance and durability—as the egg-shaped springs have less reciprocating mass in motion, require less spring pressure for greater valve control, and handle valvetrain stresses more efficiently. Additional features and specs of the Chevrolet Performance SP350 turn-key crate engine: * Forged steel crankshaft * Powdered metal connecting rods * Hypereutectic pistons (9.6:1 compression ratio) * Hydraulic roller camshaft: .474 intake/.510 exhaust lift, 208 intake/221 exhaust duration at 0.050 in. * 1.5 ratio stamped steel rocker arms * Externally balanced * 36 degree total timing at 4,000 RPM * Aluminum intake manifold * Chevrolet Performance valve covers * HEI distributor * Spark plugs * Water pump * Harmonic balancer * Timing cover * Oil pan * Flexplate: 153-tooth, 12.750 in. diameter * Starter * Fuel pump * Air conditioning pump * Alternator * Front-end accessory drive kit (not installed)

Not Yet Reviewed

$12,667.94

Chevrolet Performance ZZ572 C.I.D. 620 HP Deluxe Long Block Crate Engines

Chevrolet Performance's largest, most powerful street engine is here. The ZZ572 c.i.d. 620 hp deluxe long block crate engines are built around an all-new generation VI one-piece main seal tall deck—572 c.i.d. with approximately 9.6:1 compression, 620 hp at 5,500 rpm, and 650 lbs.-ft. of torque at 4,500 rpm, with a recommended max rpm of 6,000. These all-new race blocks have a 4.560 in. bore and are filled with forged 4340 steel cranks with 4.375 in. stroke, shot-peened forged 4340 H-beam rods, and forged aluminum pistons with full floating wrist pins. They include re-designed rectangular port aluminum cylinder heads with 118cc combustion chambers, and stainless steel valves at 2.25 in. intake side and 1.88 in. exhaust side. Experience massive torque and horsepower—from Chevrolet Performance! Additional engine specs: * Hydraulic roller camshafts * Valve lift: .632 in. intake and .632 in. exhaust side * Duration at .050 in. for intake is 254 degrees and 264 degrees exhaust side * Hardened chromoly retainers * Dual valve springs 1.50 in. coil diameter, 1.800 in. installed height with 197 lbs. seat pressure * Aluminum roller rockers with 1.7:1 ratios * High performance one-piece push rods * Tall deck single-plane intake manifold and 850 cfm carburetor * GM distributor handles ignition * Spark plugs and wire are included, along with screened and louvered windage trays * High-RPM torsional dampers * Pump gas friendly

Not Yet Reviewed

$23,080.74

BluePrint Engines Marine GM 383 C.I.D. 405 HP Base Stroker Long Block Engines with Cast Components

Do you need a replacement engine for your boat? Try one of these BluePrint Engines marine GM 383 c.i.d. 405 hp stoker long block crate engines to get the job done. They feature quality-built components designed for marine use. BluePrint engines are built for speed on the open water, performance, and reliability, all in one package. Block: * 4-bolt main block * Passenger side dipstick * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 in. straightness and roundness * Cylinders are sonic tested for thickness Rotating assembly: * SCAT cast iron crankshaft * Keith Black hypereutectic pistons * GM heavy beam connecting rods * Hastings moly rings * Balanced rotating assembly * Melling high-volume oil pump * COMP Cams roller lifter camshaft * Heavy-duty double roller timing set Cylinder heads: * Cast iron Vortec heads * Hardened retainers and springs * 2.02 in. swirl-polished intake valves * 1.60 in. swirl-polished exhaust valves * Hardened pushrods * Brezinski cast iron marine intake manifold * 9.5 to 1 compression * BluePrint Signature Series polished aluminum valve covers * Rubber coated steel oil pan * Chrome timing chain cover * Long slot rocker arms with positive locking nuts * Dyno-tested--and shipped with results

1.0 out of 5 stars ( 1 )

$7,499.00