Availability
Whether you just want a proven and convenient solution for your project vehicle, or your racing class mandates one, shop at Summit Racing Equipment for crate engines!...
Whether you just want a proven and convenient solution for your project vehicle, or your racing class mandates one, shop at Summit Racing Equipment for crate engines!
Building a new engine (or restoring an older one) takes time, tools, and lots of tuning, so buying a crate engine can be a wise investment. You can also decide how much finishing and customizing you want to do:
A short block includes a balanced rotating assembly and little else.
A long block usually comes with cylinder heads, oil pan, camshaft, and valve covers, along with horsepower and torque ratings
A fully dressed engine includes everything except front...
Whether you just want a proven and convenient solution for your project vehicle, or your racing class mandates one, shop at Summit Racing Equipment for crate engines!
Building a new engine (or restoring an older one) takes time, tools, and lots of tuning, so buying a crate engine can be a wise investment. You can also decide how much finishing and customizing you want to do:
A short block includes a balanced rotating assembly and little else.
A long block usually comes with cylinder heads, oil pan, camshaft, and valve covers, along with horsepower and torque ratings
A fully dressed engine includes everything except front drive accessories (like alternators and power steering pumps), and even a warranty!
These terms aren’t that precise, and can mean different things to different manufacturers, so make sure the crate engine you buy comes with everything you need and nothing you don’t. For more detailed information about selecting a crate motor for your project, check out this article [https://www.onallcylinders.com/2016/01/26/video-how-to-choose-the-right-crate-engine/] on our official blog, which includes a helpful video.
One of the most popular engine swap projects today uses the versatile LS design. Summit also carries other popular crate engine designs, including the Chevy small block 350, the Ford 302 and Coyote, and, of course, the Hemi.
Since 1968, Summit Racing has been helping back yard tinkerers and professional builders find the right parts for their build. A crate engine can be a significant investment, so we only carry manufacturers we’d use for our own projects. Shop from brands including Chevrolet Performance, Ford Performance, Mopar Performance, BluePrint Engines, VEGE Remanufactured Engines, First Mate, ATK, and more.
By combining the large-displacement and heavy-duty elements of the L8T 6.6L engine and a unique camshaft based off the Corvette Stingray's high-revving LT2 V-8, Chevrolet Performance engineers have created the all-new L8P 400 c.i.d. Performance crate engine. Rated at 523 hp and 543 lbs.-ft. of torque, it offers your project a unique and naturally aspirated combination of big-displacement torque and high-rpm horsepower. The L8T 6.6L foundation is the same high-strength, big-displacement engine found in the Silverado HD from 2020 to present day, featuring a forged steel crankshaft and high-strength components. Additional features such as oil-spray cooling for the pistons and a cast iron, long-skirt cylinder block with 6-bolt, cross-bolted main caps contribute to the engine's strength and durability. The new L8P builds on that with a unique, upgraded valvetrain featuring performance-oriented valves and springs, along with a unique camshaft that is based off the Corvette Stingray's LT2 engine. It has a non-active fuel management profile and more duration than the L8t's camshaft. It's the best of both engines: the largest displacement in the LT family and the power-building attributes of the Corvette camshaft. Put it to work in your project. Fast Facts: * Displacement: 400 cu. in. (6.6L) * Bore x Stroke: 4.06 in. x 3.86 in. * Crankshaft: Forged steel * Pistons: Hypereutectic aluminum * Compression ratio: 10.8:1 * Cylinder heads: Rectangular port D/I with 59.02cc chambers * Camshaft type: Billet steel hydraulic roller * Camshaft duration: 218 degree intake/231 degree exhaust at .050 in. * Fuel delivery: Direct injection with high-pressure pump * Horsepower: 523 at 5,800 rpm * Torque (lbs.-ft.): 543 at 4,800 rpm * Engine type: Gen V small block V-8 direct injection spark ignition * Block: Cast iron with 6-bolt no Dula main bearing caps * Connecting rods: Forged powder-metal * Valve lift (in.): 0.549 intake / 0.549 exhaust * Rocker arms: Investment cast roller trunnion * Rocker arm ratio: 1.8:1 * Intake manifold: Composite * Throttle body: 87mm diameter (single-bore) * Fuel delivery: High-pressure direct injection (2,175 psi / 150 bar) * Recommended fuel: Premium pump * Ignition system: Coil-on-plug * Maximum recommended RPM: 6,000 rpm * Reluctor wheel: 58X * Balanced: Internal * Note: Use with the new engine control kit, P/N 19435524, which includes a programmed controller, wire harness, pedal, oxygen sensors and mounts, MAD, fuel line pressure sensor and fuel pump power module. Flexplate P/N 12685003 must be purchased for these engines to be compatible with the 10-speed supermatic transmission. 10-speed supermatic transmission uses six bolts to attach the torque converter.
Not Yet Reviewed
$8,948.80
Summit Bucks
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI base long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III HEMI Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- PS426CTF ALSO INCLUDES: Fuel injection Throttle body Harmonic balancer Fabricated intake manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Compression ratio: 10.48:1 Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel delivery type: Fuel injected -- Spark plug: NGK 97408/ LZTR6AP11EG -- Spark plug gap: .043 in. -- Harmonic balancer: Non-weighted -- Flexplate / Flywheel: Non-weighted -- Stall converter: 2500+ -- Intake manifold: Fabricated aluminum Gen III HEMI -- Fuel recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$13,799.00
—
$16,899.00
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. These engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$26,799.00
—
$26,899.00
Summit Bucks
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. The engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW OEM Hellcat engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Holley Terminator engine harness Fuel injection Throttle body Harmonic balancer Fabricated intake Manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Fuel Injected -- Spark Plug: NGK 97408/ LZTR6AP11EG -- Spark Plug Gap: .043 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Fabricated Aluminum Gen III HEMI -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$18,799.00
—
$18,899.00
BluePrint Engines Pro Series Mopar 426 c.i.d. Base dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Holley Terminator ECU controller kit and wiring harness --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$24,299.00
Our Summit Racing™ 1972-93 Dodge truck Mopar EFI engine swap Pro Packs deliver engineered swap systems that eliminate the guesswork and doubt, while saving you the time trying to match up universal parts. We've brought together Hooker, Lakewood, and BluePrint engines, creating a package of power and performance for your truck. Each Pro Pack contains Hooker BlackHeart engine mount brackets, transmission crossmember, polyurethane transmission mounts, and 304 stainless steel Gen III Hemi swap mid-length headers, along with Lakewood engine mounts. A BluePrint Chrysler Hemi-compatible 426 c.i.d. ProSeries fuel-injected engine, base dressed or deluxe dressed, completes the package. Select the Summit™ engine swap Pro Pack desired for your Dodge truck. Notes: * Base dressed ProSeries engine includes water pump * Deluxe dressed ProSeries engine includes spark plugs and front accessory drive with water pump, alternator, power steering pump, and A/C compressor available with black or polished pulleys Engine specs: * 610 hp/525 lb.-ft. torque * Compression ratio: 10.48:1 Block: * New "BGE" Hellcat engine block * 4-bolt main * 4.090 in. bore * One-piece rear main seal Rotating Assembly: * Forged steel crank * 4.050 in. stroke * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * Gen III Hemi Apache aluminum cylinder heads * 73cc chamber * 2.140 in. intake/1.650 in. exhaust valves Camshaft specs: * Hydraulic roller cam * .610 intake/.611 exhaust lift * .614 intake/.614 exhaust lift (base dressed) * 231 intake/255 exhaust duration at .050 in. * 113-degree LSA * 115-degree LSA (base dressed) Ignition timing: Controlled by ECU Also included with engine: * Fuel injection * Throttle body * Fabricated intake manifold * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Coil(s) * Timing cover (Car) * Valve covers * Holley Terminator ECU controller kit and wiring harness
Not Yet Reviewed
$17,504.09
—
$19,504.09
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
