Availability
Ford Performance Parts 5.0L Coyote Gen 4X crate engines are modern 5.0L 32-valve DOHC V8s that utilize advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow aluminum cylinder heads, and 12:1 compression to deliver 460 hp and 420 lb.-ft. of torque (with premium fuel). The all-aluminum cylinder block features plasma transferred arc spray-in liners, cross-bolted main bearing caps, and thick main bearing bulkheads for strength. Ford's Gen 4X 5.0L Coyote features a single 80mm throttle body for easier packaging in various applications. Features and specs: * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on the Boss 302 Mustang * Forged steel crankshaft * Single 80mm "drive-by-wire" throttle body * 9.5 qt. steel oil pan * Composite lightweight intake manifold * Mustang GT 409 stainless steel exhaust manifold—right side only * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * 10R80 flexplate included * Engine weight: 445 lbs. without front accessory drive components Note: Driver side exhaust flange utilizes 5.2L pattern
Not Yet Reviewed
$11,704.99
BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a black pulley kit and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plugs and wires * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * Champion 3015 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.
Not Yet Reviewed
$19,749.00
—
$22,799.00
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a pulley kit and 4L65/70E automatic transmission. The aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$25,499.00
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 73 )
$2,263.99
—
$7,913.99
Chevrolet Performance has released its latest factory-engineered LS high-performance engine: the 376/525 LS3 long block. It blends the racing-derived ASA camshaft with the LS3 6.2L production engine to create the most powerful production-based crate engine in Chevrolet Performance's portfolio, delivering 525 hp at 6,200 rpm and 486 lbs.-ft. torque at 5,200 rpm. (For installation in older vehicles, the engine controller kit part number 19354332 is calibrated specifically for this new engine.) Using the LS3 production engine—the same used in Corvettes and Camaros—as the foundation for the LS 376/525 helped keep the retail price lower; while the ASA camshaft is a proven, power-building component that's been successful in the high-RPM world of Circle Track racing. The ASA camshaft is a hydraulic roller with .525-inch lift on both the intake and exhaust sides, along with 226 degrees duration on the intake side and 236 degrees on the exhaust side. Coupled with a tight, 110-degree lobe separation angle, it helps the engine deliver excellent throttle response and breath exceptionally well at high RPM. The cam also gives the LS 376/525 the most aggressive personality among Chevrolet Performance's growing lineup of production-based high-performance crate engines, which also includes the LS 376/480 and the carbureted LS 376/515. Front-end accessories must be obtained separately, along with the engine controller kit. Chevrolet Performance offers several accessory drive kits to suit a variety of applications; and some installations for older vehicles will require the oil pan changed. Engine specifications: * Power: 525 hp at 6,200 rpm, 486 lbs.-ft. of torque at 5,200 rpm * Displacement: 376 C.I.D., 6.2L * Bore x Stroke: 4.060 in. x 3.620 in. * Compression Ratio: 10.7:1 * Recommended Fuel: 92 Octane * Block: Cast Aluminum with 6-bolt cross bolted main caps * Crankshaft: Nodular Iron * Connecting Rods: Powdered Metal Steel * Pistons: Hypereutectic Aluminum * Camshaft: Steel Hydraulic Roller Tappet * Cam Lift: .525 in. Intake / .525 in. Exhaust * Cam Duration at .050 in.: 226 deg. Intake / 236 deg. Exhaust * Lobe Separation: 110 Degree * Cylinder Heads: Aluminum L92 style ports * Combustion Chamber: 68cc * Valves: 2.165 in. Intake/ 1.590 in. Exhaust * Rocker Arms: Cast Roller Trunnion, 1.7:1 Ratio * Balance: Internal * Reluctor: 58X * Maximum GM Recommended RPM: 6,600 * GM Recommended Torque Converter Stall 3000-3400 Engine Includes: -- Fully GM assembled long block -- Oil pump, pick-up and Camaro oil pan (12628771) -- Corvette harmonic balancer -- Front timing cover with cam sensor -- Oil filter -- Passenger side RH oil dipstick and tube (not included) (Note: Does not include oil dipstick tube, oil dipstick, or steam crossover tube.)
( 2 )
$7,988.34
ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LQ4 6.0L 535 hp base long block crate engine is fitted with LS3 heads. Engine specifications: * Horsepower: 535 * Torque: 485 * Block: OE LQ4/LQ9 6.0L iron * Bore/stroke: up to 4.030 in. x 3.622 in. * Displacement (cu.in): up to 371c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- ATK LS3 rectangular port aluminum -- 69cc/255cc -- 2.160 in. intake/1.600 in. exhaust * Rocker arms: OE 1.7 ratio with trunnion upgrade * Oil pump: Melling M295
Not Yet Reviewed
$5,199.99
ATK High Performance Chevy LM7 5.3L Gen IV short blocks are assembled with OE flat top pistons and offer these engine specifications: * Seasoned 5.3L LM7 Gen IV block * 1999-2007 year range * Bore/stroke: 3.810 in. x 3.622 in. * Displacement: 330 cu.in * OEM GM 58-tooth reluctor wheel crankshaft * OEM GM forged powder metal rods * Stock hypereutectic flat top pistons with two valve reliefs * Compression ratios: 61cc = 9.8:1/64cc = 9.5:1/68cc = 9.1:1 -- Can vary due to deck height/gasket thickness * Plasma moly rings * Camshaft bearings: Installed and clocked to OEM position * Freeze plugs: Installed and sealed * Oil galley plugs: Installed and sealed
Not Yet Reviewed
$2,206.99
The BluePrint Builder Series LS376/510 hp Standard Edition EFI crate engine and ZF 8HP70 trans combo is a complete, modern LS-based engine and advanced 8-speed automatic transmission package, perfect for resto-mods. It offers 510 hp, quick shifting (200ms), and a turnkey solution with integrated Holley EFI, electronics, and accessories—designed for high performance and easy installation in classic cars. * Engine details (LS376/510 hp): -- Type: GM LS-vompatible376 cu, in. (6.2L) -- Power: 510 hp / 440 lbs.-ft. torque -- Block: High-strength cast iron LSX-style block -- Heads: BluePrint LS3 aluminum heads -- Internals: Hydraulic roller cam, hypereutectic pistons, nodular iron crankshaft -- Fueling: Holley Terminator X Max EFI system, LS3 cast intake, drive-by-wire throttle body, injectors * Transmission details (ZF 8HP70): -- Type: Sophisticated 8-speed automatic -- Performance: Lightning-fast appx. 200ms shift times, wide gear ratio for strong acceleration -- Control: Integrated controller pre-programmed for simple plug-and-play with the engine's ECU -- Benefit: Modern, dual-clutch-like feel with traditional automatic comfort and lightweight internals * Package features (Builder Series): -- Turnkey: Engine and transmission come assembled, saving time and complexity -- Accessories: Includes black pulley kit, water pump, alternator, etc. (some configurations) -- Electronics: Complete harness, ECU, and drive-by-wire pedal -- Ideal for: * Pro-Touring builds, Resto-mods, high performance street machines * Swaps needing modern power and efficiency without the hassle of sourcing individual components
Not Yet Reviewed
$19,999.00
BluePrint Engines Pro Series Chevy LS 376 c.i.d. 495 hp EFI truck long block crate engines are fully Dyno tested, passed vigorous inspections, and are prepared for those wanting maximum horsepower and durability. Features, specs, and contents: * 495 hp, 490 ft.-lb., compression ratio 10.7:1 * Cast Iron block with 6-bolt main * Nodular iron crankshaft * Connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internal balanced rotating assembly * BluePrint LS3 aluminum cylinder heads -- 69cc chamber -- 2.165 in. intake/1.59 in. exhaust valves -- 259cc intake/102cc exhaust runners * BluePrint hydraulic roller cam -- .553 intake/.553 exhaust lift -- 218 intake/224 exhaust duration at .050 -- 113-degree lobe separation, 110ICL * L92 truck intake manifold * Fuel injectors and rail * Truck water pump * Truck harmonic balancer * LS low-profile aluminum oil pan * GM-style smart coil packs * Spark plugs and wires * Valve covers * Oil pump * Dipstick
Not Yet Reviewed
$10,949.00
Clearance
ATK Marine Engines offers premium-quality rebuilt long block engines specifically for boating applications. These engines are designed to deliver maximum performance and long-term durability for your boat. Order the model recommended for your marine application. ATK Marine rebuilt engines include: * Special marine pistons and rings * Special marine camshaft * Marine gaskets * New intake and exhaust valves * New main, rod, and cam bearings * New valve lifters, rocker nuts, and swivels * Heavy-duty double roller timing chains * Cam sprocket * Crank gear * Freeze plugs
( 45 )
$5,184.99
—
$5,542.99
The BluePrint Builder Series LS427/800 hp Supercharged crate engine and 4L80E-HD trans combo is a complete, ready-to-install LS-based powertrain package. It features a powerful 427 cu. in. engine making 800 hp and 780 lbs.-ft. of torque—paired with a heavy-duty 4L80E automatic transmission, Holley EFI, and essential accessories, designed for muscle cars and hot rods needing serious modern performance in a plug-and-play format. This kit combines a forged rotating assembly, high-flow heads, and a Magnuson supercharger for extreme power, simplifying swaps with pre-matched components. Key features and components: * Engine: GM LS compatible 427 cu. in. (7.0L) small block with an LSX-style block * Power output: Appx. 800 hp and 780 lbs.-ft. torque * Supercharger: Magnuson 2650 supercharger for maximum boost * Internal components: Forged crankshaft, forged pistons, aluminum cylinder heads, hydraulic roller cam * Fueling: Holley Terminator X EFI system for precise control * Transmission: Heavy-duty 4L80E automatic * Accessories: Includes water pump, alternator, power steering, A/C, and belts (often with choice of black or polished pulleys) * Package deal: Combines engine, transmission, and accessories for easier installation * Each package is dyno-tested * Benefits of this combo: -- Convenience: Saves time and money by bundling major drivetrain components that are already matched and assembled -- High performance: Delivers massive power for street performance, track days, or custom builds -- Modern tech: EFI control, LS platform compatibility, and modern components -- Reliability: Built with strong internals and paired with a robust transmission and accessories -- It's a complete, powerful, and simplified modern LS powertrain solution for serious performance enthusiasts
Not Yet Reviewed
$34,649.00
BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 625 horsepower, this standard edition builder series includes a polished pulley kit and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 565 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * OEM style (4.060 in. bored to 4.069 in.) * Main caps are 6-bolt * One-piece rear main seal Rotating Assembly: * New forged crankshaft * Stroke – 4.125 in. * Forged connecting rods (6.125 in.) * Forged pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.624 in. * Exhaust valve lift – 0.624 in. * Intake duration at 0.050 in. of lift – 239 * Exhaust duration at 0.050 in. of lift - 255 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * ECM supplied with calibration (initial and total timing are controlled by PCM) * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * All required (to make engine run) sensors and wiring harness (LS controller package only controls engine) * Unlocked ECU for local Dyno shop tuning refinement * LT4 87mm DBW (Drive-By-Wire) throttle body * Valve covers, retro-fit oil pan (fits most 1955-95 GM front engine, RWD, V8 cars), and timing cover * LS3 car intake manifold * Fuel injectors (42 lbs.) and return-less fuel rail * Coil packs * Spark plug wires * Gas/throttle pedal * Complete front accessory drive includes A/C, power steering, alternator, belts, and pulleys * ACDelco 41-985 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91-93 octane. Recommended oil is BPP710. Not designed for use with dry sump or pollution-controlled vehicles.
Not Yet Reviewed
$23,299.00
—
$26,499.00
The BluePrint Builder Series LS427/605 hp Standard Edition EFI crate engine and 4L65/70E trans combo is a complete, ready-to-install engine and automatic transmission package for classic cars and hot rods. It features a powerful 427 cu. in. GM LS-style engine making around 605 hp with EFI—paired with a robust 4L65/70E automatic transmission, electronic controller, torque converter, and accessories for a simplified drivetrain swap. This kit takes the guesswork out of matching components, offering a high performance, dyno-tested solution with forged internals, aluminum heads, and modern fuel injection. * Engine details (LS427/605 hp): -- Displacement: 427 cu. in. (7.0L) -- Horsepower/Torque: Around 605 hp / 565 lbs.-ft. -- Block: BluePrint's high-strength cast iron LS-style block with enhanced strength -- Rotating assembly: Forged crankshaft, forged connecting rods, forged pistons for durability -- Cylinder heads: BluePrint aluminum heads with large intake/exhaust runners -- Camshaft: Hydraulic roller cam -- Fuel system: Complete electronic fuel injection (EFI) system, often with Holley's Terminator X -- Compression ratio: 11:1 * Transmission details (4L65/70E): -- Type: Heavy-duty automatic transmission (4L65E or 4L70E) -- Controller: Includes an electronic transmission controller for proper shifting -- Torque converter: Comes with a matching torque converter (around 2,200-2,400 rpm stall) -- Flexplate: Non-weighted flexplate installed * Package benefits: -- Complete drivetrain: Comes fully assembled and bolted together -- Simplified installation: Designed as a plug-and-play solution for swaps -- Dyno tested: Engine performance is verified on a dyno, with results provided -- Includes accessories: Often includes front accessories (alternator, power steering pump) and a swap-ready oil pan
Not Yet Reviewed
$24,049.00
—
$26,349.00
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a polished (or black) pulley kit and T56 manual transmission. The BluePrint aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged steel crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 trans combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged steel crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$25,599.00
—
$25,699.00
BluePrint Pro Series Chevy LS 427 ci.d. EFI supercharged deluxe long block crate engines deliver 800 hp and 780 lbs.-ft. of torque. They also include LS3 aluminum cylinder heads, forged pistons, hydraulic roller camshaft, forged crankshaft, a Holley Terminator X Max Gen IV complete ECU and harness for engine management, and a polished or black finish accessory drive system. Additional features and specs: -- Block: * BluePrint Engines high-strength cast iron block * Increased deck thickness and strength webbing * Extended cylinder skirt * Priority main oiling * 4.070 in. bore * 6-bolt main * One-piece rear main seal * Improved water jacket design * Utilizes OEM LS3 front and rear covers * Compression ratio: 11:1 -- Rotating Assembly: * New forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced -- Cylinder Heads: * BluePrint aluminum cylinder heads * 70cc chamber * 2.165 in. intake / 1.600 in. exhaust valves * 259cc intake / 102cc exhaust runners -- Cam Specs: * Hydraulic roller * .624 intake / .624 exhaust lift * 239 intake / 255 exhaust duration * At .050-114 degree lobe separation -- Ignition Timing: * ECM supplied with calibration -- Also Includes: * Holley Terminator X Max - Gen IV complete ECU/Harness EFI system * Magnuson TVS2650 supercharger * Coil packs * Valve covers * Oil pan * All sensors required for engine to run * Drive-by-wire throttle body * Timing cover * Spark plugs and wires * Harmonic balancer * Front accessory drive with power steering pump, water pump, alternator, and air compressor -- Notes: * Not for use in pollution-controlled vehicles. * BluePrint Engines recommends air intake kit BPPLS01013 to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU / tuning.
Not Yet Reviewed
$25,249.00
—
$25,349.00
BluePrint Pro Series Chevy LS 376 c.i.d. EFI supercharged deluxe long block crate engines deliver 700 hp and 640 lbs.-ft. of torque. They include LS3 aluminum cylinder heads, forged pistons, hydraulic roller camshaft, nodular iron crankshaft, a Holley Terminator X Max Gen IV complete ECU and harness for engine management, a polished or black finish accessory drive system, and more. Additional features and specs: -- Block: * BluePrint Engines high-strength cast iron 6.2L block * Increased deck thickness and strength webbing * Extended cylinder skirt * Priority main oiling * 4.070 in. bore * 6-bolt main * One-piece rear main seal * Improved water jacket design * Compression ratio: 9.5:1 -- Rotating Assembly: * Forged crankshaft * 3.622 in. stroke * 6.125 in. connecting rods with 150,000 psi bolts * Forged pistons * Internally balanced front and rear -- Cylinder heads: * BluePrint aluminum cylinder heads * 70cc chamber * 2.165 in. intake / 1.600 in. exhaust valves * 259cc Intake / 102cc exhaust runners -- Cam specs: * Cam type: Hydraulic Roller Cam * .612 intake / .585 exhaust lift * 225 intake / 238 exhaust duration * @.050-113 degree lobe separation -- Also includes: * Holley Terminator X Max - Gen IV complete ECU/Harness EFI system * Coil packs * Valve covers * Oil pan * All sensors required for engine to run * Drive-by-wire throttle body * Throttle pedal * Timing cover * Spark plugs and wires * Harmonic balancer * Front accessory drive with power steering pump, water pump, alternator, and air compressor -- Notes: * Not for use in pollution-controlled vehicles. * BluePrint Engines recommends air intake kit BPPLS01013 to ensure correct MAF calculations and Dyno calibration are maintained with the above ECU / tuning.
Not Yet Reviewed
$22,499.00
—
$22,599.00
The BluePrint Builder Series LS376/530 hp Truck Edition EFI crate engine and 4L65/70E trans combo is a pre-assembled, ready-to-install powertrain package. It features a powerful, fuel-injected 376 cu. in. GM LS-compatible engine making 530 hp, paired with a durable 4L65/70E automatic transmission. The kit is designed for hot rods and trucks, simplifying installation with included electronics (Holley EFI), accessories, and even a starter, all dyno-tested. Key components and features: * Engine: GM LS-compatible 376 cu. in. (6.2L) small block, aluminum heads, hypereutectic pistons, nodular iron crank, producing 530 hp and 495 lbs.-ft. torque * Transmission: 4L65/70E 4-speed automatic, pre-mated to the engine * Fuel injection: Holley Terminator X Max EFI System with ECU, harness, drive-by-wire pedal, and throttle body * Accessories: Comes with a front accessory drive (alternator, power steering, A/C, water pump, belts/pulleys) * Ready-to-go: Assembled, dyno-tested, includes starter, swap oil pan, coil packs, plugs/wires, and a base tune for 91+ octane fuel * Truck Edition: Often includes a lower-profile oil pan and potentially 4WD-ready features, optimized for truck builds * Combo benefits: -- Simplifies swaps: Combines the engine and transmission as one unit, eliminating alignment issues -- Complete solution: Offers a turn-key drivetrain with electronics and accessories, saving time and complexity -- Performance and reliability: Built with quality components and tested for specified power levels -- This is a powerful, complete, and hassle-free LS engine and transmission package for builders wanting a strong, modern powertrain for their classic truck or resto-mod project
Not Yet Reviewed
$19,949.00
—
$22,149.00
BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 510 horsepower, this standard edition builder series includes a polished pulley kit and T56 manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this engine assembly produces 440 lbs.-ft. of torque. When you need or want a new powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and TKX trans combos. Product description and specifications: Block: * High strength cast iron (LSX Style) block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0662 in. Bore * 6-bolt main Rotating Assembly: * Nodular iron crankshaft * 3.622 in. stroke * 6.098 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internally balanced front and rear Cylinder Heads: * BluePrint LS3 aluminum cylinder heads * 69cc chamber * 2.165 in. intake/1.590 in. exhaust valves * 259cc intake/102cc exhaust runners Cam Specs: * Hydraulic Roller Cam * 0.612 Intake/0.585 Exhaust Lift * 225 Intake/238 Exhaust duration * @.050-113 Degree Lobe Separation Ignition Timing: * Ignition Timing and Spark Advance are Controlled by BluePrint Engine Calibrated ECU * Transmission Controller Required if pairing to an automatic (ECU Does Not Offer Transmission Control) Other parts: * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS Swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and Fuel Rail Kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Notes: This engine requires a non-weighted flex plate such as (BPP12654640) / flywheel (BPPLS1611). Recommended fuel: 91 Octane. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The BluePrint Engines LS controller package contains a fully tested, calibrated, locked ECU, optimized for this specific engine. This package has undergone extensive testing for performance, reliability and the safety of you and your engine.
Not Yet Reviewed
$21,249.00
BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 625 horsepower, this standard edition builder series includes a choice of black or polished pulley kits and a T56 manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 565 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and T56 transmission combos. Other product features, items, and specifications include: Block: * OEM style (4.060 in. bored to 4.069 in.) * Main caps are 6-bolt * One-piece rear main seal Rotating Assembly: * New forged crankshaft * Stroke – 4.125 in. * Forged connecting rods (6.125 in.) * Forged pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.624 in. * Exhaust valve lift – 0.624 in. * Intake duration at 0.050 in. of lift – 239 * Exhaust duration at 0.050 in. of lift - 255 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * ECM supplied with calibration (initial and total timing are controlled by PCM) * Firing order is 1-8-7-2-6-5-4-3 Assembled 6-speed Transmission Package: * McLeod Super Street Pro twin-disc clutch * Steel bellhousing * Non-weighted billet flywheel * Starter * Gear ratios are 2.66:1 (first), 1.78:1 (second), 1.30:1 (third), 1.00:1 (fourth), 0.80:1 (fifth), and 0.63:1 (sixth) * Torque converter with 2,200–plus rpm stall Other Components: * All required (to make engine run) sensors and wiring harness (LS controller package only controls engine) * Unlocked ECU for local Dyno shop tuning refinement * LT4 87mm DBW (Drive-By-Wire) throttle body * Valve covers, retro-fit oil pan (fits most 1955-95 GM front engine, RWD, V8 cars), and timing cover * LS3 car intake manifold * Fuel injectors (42 lbs.) and return-less fuel rail * Coil packs * Spark plug wires * Gas/throttle pedal * Complete front accessory drive includes A/C, power steering, alternator, belts, and pulleys * ACDelco 41-985 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91-93 octane. Recommended oil is BPP710. Not designed for use with dry sump or pollution-controlled vehicles.
Not Yet Reviewed
$23,399.00
—
$26,709.00
BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a polished pulley kit and TKX manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 5-speed TKX Transmission Package: * McLeod Super Street Pro twin-disc clutch * Hydraulic throwout bearing * Bellhousing * Non-weighted billet flywheel * Starter * Gear ratios are 2.87:1 (first), 1.89:1 (second), 1.28:1 (third), 1.00:1 (fourth), and 0.68:1 (fifth) * Torque converter with 2,200–plus rpm stall Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plug wires * Champion 3015 spark plugs (0.040 in. gap) * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys. Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.
Not Yet Reviewed
$19,049.00
—
$22,449.00
ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LM7 5.3L 500 hp long block crate engine is fitted with AFR heads and FiTech EFI. Engine specifications: * Horsepower: 500 * Torque: 440 * Block: OE LM7/5.3L iron * Bore/stroke: up to 3.903 in. x 3.622 in. * Displacement (cu.in): up to 347c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- AFR CNC ported aluminum -- 59cc/200cc -- 2.000 in. intake/1.570 in. exhaust * Rocker arms: OE 1.7 ratio * Oil pump: Melling M295 * EFI System: -- FiTech Ultra port injection LS1 750 hp with transmission control -- Wiring harness and ECM/TCM included * Fuel injectors: FiTech 55 lb. * Spark plugs: Autolite #104 * Spark plug wires: 8mm * Balancer: Stock internally balanced
Not Yet Reviewed
$8,899.99
BluePrint Builder Series LS427/605HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 605 horsepower, this standard edition builder series includes a TKX manual transmission and pulley kit (pulley kit is an optional add-on, depending on the specific engine package you purchase). The aluminum BluePrint Engines cylinder heads help produce a nice 11.1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 565 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/605HP Standard Edition EFI crate engine and TKX transmission combos. Other product features, items, and specifications: * BluePrint Engines High Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0665 in. bore * 6-bolt main Rotating Assembly: * Forged crankshaft * Stroke – 4.125 in. * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced (front and rear) Cylinder Heads: * BluePrint cast aluminum PS8015 models * Chamber – 70cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft Specs: * Hydraulic roller * Intake valve lift – 0.624 in. * Exhaust valve lift – 0.624 in. * Intake duration at 0.050 in. of lift – 239 * Exhaust duration at 0.050 in. of lift – 255 * Lobe separation angle (LSA) – 114 degrees Ignition Timing: * ECM supplied calibration Assembled TKX Transmission Package: * McLeod Super Street Pro dual-disc clutch * Hydraulic throw-out bearing * Bell housing * Billet flywheel * Engine guard * Starter * Gear ratios are 2.87:1 (first), 1.89:1 (second), 1.28:1 (third), 1.00:1 (fourth), and 0.68:1 (fifth) Other Components: * MLL-BLS4273KBTKX and MLL-BLS4273KTKX engine/trans combo packages include: Front accessory drive with LT1 style 150-amp alternator, LT1 Style water pump, Type II power steering pump with baffled edges, and compact style A/C compressor * Holley Terminator X Max - Gen IV Complete ECU/Harness EFI System * LS Swap oil pan, windage tray, pickup screen * BluePrint Engines fuel injectors and rail * DBW throttle body * Throttle pedal, and sensors * GM plastic intake manifold * Spark plugs and wires * Harmonic balancer * Coil packs Important Notes: Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. BluePrint Engines recommends air intake kit BPPLS01013 to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning. Engine/Trans Package Ships assembled.
Not Yet Reviewed
$23,349.00
—
$25,649.00
BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and T56 trans combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a T56 manual transmission and pulley kit (pulley kit is an optional add-on, depending on the specific engine package you purchase). The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and T56 trans combos. Other product features, items, and specifications: Block: * BluePrint Engines High Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 6-bolt main Rotating Assembly: * Nodular Iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced (front and rear) Cylinder Heads: * BluePrint aluminum PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft Specs: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift – 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Assembled 6-speed T56 6-speed Transmission Package: * McLeod Super Street Pro dual-disc clutch * Steel Bell housing * Billet flywheel * Engine guard * Starter * Gear ratios are 2.66:1 (first), 1.78:1 (second), 1.30:1 (third), 1.00:1 (fourth), 0.80:1 (fifth), and 0.63:1 (sixth) Other Components: * MLL-BLS3763KBT56 and MLL-BLS3763KT56 include front accessory drive with LT1 style 150-amp alternator, LT1 Style water pump, Type II power steering pump with baffled edges, and compact style A/C compressor * Holley Terminator X Max - Gen IV Complete ECU/Harness EFI System * BluePrint Engines fuel injectors and rail * Low-profile swap oil pan * DBW throttle body * Loaded intake manifold * Spark plugs and wires * Harmonic balancer * Coil packs Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF and Dyno calibration are maintained with the above ECU / tuning. Engine/Trans Package Ships assembled.
Not Yet Reviewed
$20,599.00
—
$22,899.00
BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 510 horsepower, this standard edition builder series includes a polished pulley kit and T56 manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this engine assembly produces 440 lbs.-ft. of torque. When you need or want a new powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and T56 trans combos. Product description and specifications: Block: * High-strength cast iron (LSX style) * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0662 in. Bore * 6-bolt main Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced front and rear Cylinder Heads: * BluePrint LS3 aluminum cylinder heads * Chamber – 69cc * 2.165 in. Intake /1.590 in. Exhaust Valves * 259cc Intake / 102cc Exhaust Runners Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees Ignition Timing: * Ignition Timing and Spark Advance are Controlled by BluePrint Engine Calibrated ECU * Transmission Controller Required if pairing to an automatic (ECU Does Not Offer Transmission Control) Other Components: * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS Swap oil pan * Water Pump * Engine harness and ECU kit * Injectors and Fuel Rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Notes: This engine requires a non-weighted flex plate such as (BPP12654640) / flywheel (BPPLS1611) not included. Recommended fuel: 91 Octane. BluePrint Engines recommends a 2200+ rpm stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The BluePrint Engines LS controller package contains a fully tested, calibrated, locked ECU, optimized for this specific engine. This package has undergone extensive testing for performance, reliability and the safety of you and your engine.
Not Yet Reviewed
$22,049.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
