21 Results Found For "cap"

Showing In Stock Items. Show All 55 Items.

Individual Parts

Part Groups

Results 1 - 21 of 21

BluePrint Engines Low Profile GM 383 C.I.D. 436 HP Dressed EFI Long Block Crate Engines

BluePrint Engines low profile GM 383 c.i.d. 436 hp dressed EFI long block crate engines are fully Dyno tested, passed vigorous inspections, and are prepared to power up your project. These GM compatible engines are designed with a small diameter harmonic balancer, small cap distributor, and drop base air cleaner for vehicles with low firewall or hood clearance. They are a great choice to replace your tired old factory engine with fuel-injected performance. They are offered with or without front accessory drive kit. Features, specs, and contents: * Horsepower and torque: 436 hp/443 lb.-ft. * Cast iron block * 4-bolt main * 4.00 in. bore * Cast steel crankshaft * 3.750 in. stroke * OEM-type 5.700 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Aluminum cylinder heads--64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners * Hydraulic roller cam * .544 intake/.555 exhaust * 230 intake/236 exhaust duration at .050 * 110 degree lobe separation * Holley Sniper EFI, Premium vintage valve covers and air cleaner, aluminum intake manifold, oil pan, timing cover, spark plugs and under header spark plug wires, small cap ready-to-run distributor with tach drive and coil, harmonic balancer * 30 month/50,000 mile warranty

Not Yet Reviewed

$11,399.00

Summit Bucks

BluePrint Builder Series 302W/365HP Bronco Edition EFI Crate Engine and 4R70W Transmission Combos

BluePrint Builder Series 302W/365HP Bronco Edition EFI crate engine and 4R70W transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Ford small block-compatible 302 (c.i.d.) engine that produces 365 horsepower, this Bronco edition builder series includes a black pulley kit and 4R70W automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and steel crankshaft. Altogether, this assembly produces 365 lbs.-ft. of torque. When you need or want a new powertrain for your Ford Bronco, go with the authority in crate engines and their BluePrint Builder Series 302W/365HP Bronco Edition EFI crate engine and 4R70W transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Main caps are 4-bolt * Bore is 4.000 in. * One-piece rear main seal Rotating Assembly: * Cast steel crankshaft * Stroke – 3.000 in. (and OEM-style 5.090 in. connecting rods) * Hypereutectic pistons * Externally balanced BPP50 harmonic balancer Cylinder Heads: * BluePrint HP9009 models * Chamber – 60cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 190cc intake and 60cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.533 in. * Exhaust valve lift – 0.544 in. * Intake duration at 0.050 in. of lift – 215 * Exhaust duration at 0.050 in. of lift - 220 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * Initial is 10-16 degrees * Will be 34 degrees total at 3,500 rpm * Total is 32-34 degrees * Firing order is 1-3-7-2-6-5-4-8 Complete 4WD-ready 4R70W Transmission (built to 650 horsepower): * Sniper Electronic transmission controller and TPS breakout harness for integration with controller * Torque converter with 2,200 – 2,600 rpm stall * Flexplate * Starter * This 4-speed overdrive transmission with lockup is specifically prepped for a 1966-76 Dana 20 transfer case (sold separately) * Gear ratios are 2.84:1 (first), 1.55:1 (second), 1.00:1 (third), 0.70:1 (overdrive), and 2.32:1 (reverse) Other Components: * Dual plane aluminum intake manifold with satin finish * Complete fuel injection system * Distributor * Valve covers * Rear sump oil pan * Billet aluminum front accessory drive with black finish (includes A/C and power steering) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) Note: Not intended for use in controlled vehicles. Recommended fuel is 91 octane. Recommended oil is non-synthetic 10W30. Not designed for EGR compatibility.

Not Yet Reviewed

$20,899.00

Summit Bucks

BluePrint Builder Series 632/815HP Standard Edition EFI Crate Engine and 4L80E Transmission Combos

BluePrint Builder Series 632/815HP Standard Edition EFI crate engine and 4L80E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy big block-compatible 632 (c.i.d.) engine that produces 815 horsepower, this standard edition builder Pro Series includes a polished pulley kit and 4L80E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 775 lbs.-ft. of torque. When you need or want a new powertrain for your GM ride, go with the authority in crate engines and their BluePrint Builder Series 632/815HP Standard Edition EFI crate engine and 4L80E transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Bore is 4.600 in. * Main caps are 4-bolt * One-piece rear main seal * Mechanical fuel pump provision * Tall deck (approximately 0.400 in. taller and wider than OEM block) Rotating Assembly: * New BluePrint forged crankshaft * Stroke – 4.750 in. * Forged H-beam 6.635 in. connecting rods * Forged pistons * Internal balance * Non-weighted harmonic balancer Aluminum Cylinder Heads: * BluePrint PS8012 performance models (0.300 in. raised exhaust port vs. OEM) * Chamber – 119cc * Valves are 2.300 in. intake and 1.880 in. exhaust * Exhaust runners are 358cc intake and 125cc exhaust * Builder must verify clearance of exhaust, shift linkage, steering components, etc. before ordering Camshaft: * Hydraulic roller * Intake valve lift – 0.698 in. * Exhaust valve lift – 0.698 in. * Intake duration at 0.050 in. of lift – 272 * Exhaust duration at 0.050 in. of lift - 282 * Lobe separation angle (LSA) – 110 degrees Ignition Timing * Initial is 10-16 degrees (16-20 degrees for Dominator-style carburetors) * Total is 32-34 degrees (by 2,500 rpm for Dominator-style carburetors) * Firing order is 1-8-4-3-6-5-7-2 Automatic Transmission Package: * Complete 4L80E package with electronic controller (lockup capability) * Torque converter with 3,800–4,200 rpm stall * Non-weighted flexplate * Starter * Gear ratios are 2.482:1 (first), 1.482:1 (second), 1.000:1 (third), 0.750:1 (fourth), 2.077:1 (reverse) Other Components: * Single plane aluminum intake manifold with satin finish * Complete EFI system with Aeromotive A1000 fuel pump * Valve covers, oil pan, and timing cover * Pro Billet distributor * Front accessory drive with polished finish (includes alternator, A/C, power steering, water pump, pulleys, and belts) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Recommended fuel is 91 octane. Recommended oil is BPP710. Not designed for EGR-compatibility.

Not Yet Reviewed

$30,999.00

Chevrolet Performance CPP LT1 6.2L Long Block Crate Engines

Chevrolet Performance CPP LT1 6.2L long block crate engines were introduced on the seventh-generation Corvette Stingray, and opened the next chapter in the long, historic legacy of small block engines. Architecturally similar to the LS family of engines, these LT1 engines feature a unique block casting, cylinder head design, oiling system and more. They're offered with a wet-sump or dry-sump oiling system. Chevrolet Performance CPP LT1 6.2L long block crate engine features and specs: * Engine type: Direct injection spark ignition Gen V small block V8 * Displacement: 376 c.i.d. * Bore x stroke: 4.065 x 3.622 (103.25 x 92mm) * Block: Cast aluminum with 6-bolt nodular iron main bearing caps * Crankshaft: Forged steel * Connecting rods: Forged powdered metal * Pistons: Hypereutectic aluminum * Camshaft type: Billet steel roller * Valve lift: .561 intake/.531 exhaust * Camshaft duration (@ 0.050 in.): 242 degrees intake/244 degrees exhaust * Cylinder heads: Aluminum, rectangular port * Valve size: 2.130 intake/1.590 exhaust * Compression ratio: 11.5:1 * Rocker arms: Investment-cast roller trunnion * Rocker arm ratio: 1.81:1 * Recommended fuel: Premium pump * Maximum recommended rpm: 6600 * Reluctor wheel: 58X * Balanced: Internal

Not Yet Reviewed

$10,641.52

Chevrolet Performance LSX 454 Long Block Crate Engines

Chevrolet Performance LSX 454 long block crate engines are built with an all-forged, super-tough rotating assembly and feature a pair of new deep-breathing LSX 6-bolt cylinder heads. They also come dressed with great looking, all-new orange powdercoated valve covers with an engraved LSX 454 logo. With a carburetor and high-flow Chevrolet Performance intake manifold (sold separately), these engines are good for about 627 hp and 586 lbs.-ft. of torque. Due to the number of application variations, the LSX 454 crate engines do not include an oil pan, and the valve covers do not include provisions for mounting the ignition coil brackets. Other specifications include: * 4.185 in. bore * 4.125 in. stroke * Cast iron LSX Series block with cross-bolted 6-bolt main caps * Forged steel crankshaft * Forged steel connecting rods * Forged aluminum 11.0:1 compression pistons * Hydraulic roller camshaft * 0.635 in. lift intake/0.635 in. lift exhaust, 236 intake/246 exhaust duration at .050 in. lift * Aluminum LSX-LS7 cylinder heads with 70cc chambers * 1.8:1 aluminum roller rocker arms * 58-tooth reluctor wheel

4.0 out of 5 stars ( 1 )

$16,836.20

Ford Performance Parts 5.0L Coyote Gen 4X Crate Engines

Ford Performance Parts 5.0L Coyote Gen 4X crate engines are modern 5.0L 32-valve DOHC V8s that utilize advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow aluminum cylinder heads, and 12:1 compression to deliver 460 hp and 420 lb.-ft. of torque (with premium fuel). The all-aluminum cylinder block features plasma transferred arc spray-in liners, cross-bolted main bearing caps, and thick main bearing bulkheads for strength. Ford's Gen 4X 5.0L Coyote features a single 80mm throttle body for easier packaging in various applications. Features and specs: * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on the Boss 302 Mustang * Forged steel crankshaft * Single 80mm "drive-by-wire" throttle body * 9.5 qt. steel oil pan * Composite lightweight intake manifold * Mustang GT 409 stainless steel exhaust manifold—right side only * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * 10R80 flexplate included * Engine weight: 445 lbs. without front accessory drive components Note: Driver side exhaust flange utilizes 5.2L pattern

Not Yet Reviewed

$11,704.99

Chevrolet Performance ZZ427/480 HP Long Block Crate Engines

Chevrolet Performance has recreated the classic L88 Big Block combination in the ZZ427/480 long block crate engine. Rated at 480 hp, it features an iron block, forged steel crankshaft, and high-flow aluminum cylinder heads. An upgraded hydraulic roller camshaft improves drivability and rpm range, while lower 10.1:1 compression means you can enjoy the power on pump gas, too. The ZZ427 comes complete with: high-flow oval port heads, a high-lift camshaft, aluminum intake manifold, 770 cfm Holley carburetor, an HEI distributor, aluminum water pump, balancer, spark plug wires, and a 14 in. flexplate. If you're looking for a modern version of the classic L88, the Chevrolet Performance ZZ427/480 long block crate engine is the answer. Additional specs and features include: * 4.250 in. bore with 3.750 in stroke * Cast iron block with 4-bolt main caps * Forged steel crankshaft * Forged steel connecting rods * Forged aluminum pistons * Hydraulic roller camshaft: - Valve lift .527 in. intake/.544 in. exhaust - Duration (.050 in) 224 intake/ 234 exhaust * Aluminum oval port heads with 110cc chambers * 2.190 in. intake/1.880 in. exhaust valves * 10.1:1 compression ratio * Aluminum 1.7:1 ratio roller rocker arms * HEI distributor * 770 cfm carburetor * Aluminum short water pump * Ignition timing base 10 degrees BTDC, 36 degrees total * 6,400 maximum recommended rpm

3.6 out of 5 stars ( 5 )

$16,940.27

Ford Performance Parts 2024 Gen 4 5.0L 480 HP Coyote Long Block Crate Engines

Ford Performance Parts 2024 Gen 4 5.0L 480 hp Coyote engines are the latest all-aluminum crate engines from the 2024 Mustang GT. These modern 5.0L 32-valve DOHC V8s use advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow cylinder heads, dual throttle bodies, and a heightened compression ratio to deliver 480 hp and 415 lb.-ft. of torque (with premium fuel). These lightweight plasma-transferred wire-arc spray aluminum cylinder blocks feature cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, and an optimized oil drain back and windage control to improve high-rpm performance. Available with production flexplate (automatic) or dual mass flywheel (manual) and both include engine harness. Engine specs: * 480 hp at 7,150 rpm * 415 lb.-ft. of torque at 4,900 rpm * 12.0:1 compression ratio * Bore 93mm x stroke 92.7mm * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on BOSS 302 Mustang * Forged steel crankshaft * Aluminum block with plasma transferred wire arc spray weld liner coating * Longer, 12mm head bolts for higher clamp load * 9.5 qt capacity steel oil pan * Tuned composite intake manifold provides efficient air delivery and weight savings * Twin 80mm single bore drive-by-wire, electronic throttle bodies with variable runner control * High-flow aluminum cylinder heads, dual overhead camshaft (DOHC), four valves per cylinder, variable intake and exhaust camshaft timing * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * Mustang GT 409 stainless steel tubular exhaust manifold on the RIGHT SIDE ONLY

5.0 out of 5 stars ( 1 )

$11,051.99

—

$11,701.99

Ford Performance Parts 5.0L Gen 3 Aluminator Short Block Crate Engines

Ford Performance Parts 5.0L Gen 3 Aluminator short block crate engines are hand assembled using quality high-performance internal parts. Offered in two compression ratios, they serve as a strong foundation for the enthusiast that wants to spec and finish a Coyote build to his or her particular application and needs. Ford Performance engineers have taken care of the toughest part of building a new engine by designing a strong and durable short block that offers a wide range of power possibilities. Additional features and specifications: * 5.0L (302 cu. in.) * Precision internal balanced * Available in 12.0:1 or 9.5:1 compression ratio * Forged steel crankshaft * Mahle hard anodized forged pistons with Grafal low-friction coating * Manley H-beam connecting rods with ARP2000 bolts * 2018+ (Gen 3) production block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength * Accepts Gen 1, 2, 3 or GT350 cylinder heads with corresponding generation head gasket * Assembled and ready for Coyote heads, cams, timing set, and oil system

Not Yet Reviewed

$5,947.99

—

$7,149.99

Chevrolet Performance 5.7L 350 HO 333 HP Turnkey Long Block Crate Engines

The Chevrolet Performance 5.7L 350 HO 333 HP Turnkey long block crate engines are assembled with all-new parts and high-flow heads, giving you more power than just about any production-spec small block ever installed at the factory. Designed, engineered, and tested to stringent Chevrolet specifications, these cast-iron blocks with four-bolt main caps is the foundation for the 350 HO, which is topped with iron Vortec heads fitted with 1.94/1.50 in. valves. In addition, durable rotating assembly has aluminum pistons that deliver a 9.0:1 compression ratio. Chevrolet Performance pioneered their high-performance crate engine half a century ago—and they have never stopped working to offer enthusiasts new and more powerful solutions for their projects. You've got a dream in your garage. Chevrolet Performance wants to help you bring it to life. Tech Specs: * Engine Type: Chevy Small-Block V-8 * Displacement (cu. in.): 350 * Bore x Stroke (in.): 4.000 x 3.480 * Block: Cast-iron with four-bolt main caps * Crankshaft: Nodular iron * Connecting Rods: powdered-metal steel * Pistons: cast-aluminum * Camshaft Type: hydraulic flat tappet * Camshaft Lift (in.): .435 intake / .460 exhaust * Camshaft Duration (@.050 in.): 212° intake/222° exhaust * Cylinder Heads: Vortec iron; 64-cc chambers * Valve Size (in.): 1.940 intake/1.500 exhaust * Compression Ratio: 9.0:1 nominal * Rocker Arms: stamped steel * Rocker Arm Ratio: 1.5:1 * Water Pump: cast iron, long-style * Flexplate: 12.750 in. * Recommended Fuel: premium pump * Ignition Timing: 32° Total @ 4,000 rpm * Maximum Recommended RPM: 5100 * External balance

4.0 out of 5 stars ( 1 )

$8,634.77

Chevrolet Performance SP350/357 Base Chevrolet Crate Engines

If it's affordable performance you're looking for to power your project vehicle, Chevrolet Performance's SP350/357 Base Chevrolet crate engine delivers! With 357 hp and a deep reserve of low-rpm torque, it quickly reminds you why Chevrolet's original 350 small block has been the industry benchmark for decades. The SP350/357 leverages the strength of a strong rotating assembly secured in a brand-new block with 4-bolt mains, along with economical Vortec iron cylinder heads. A roller camshaft optimizes driveability and airflow capability. It all adds up to a 24 hp gain over CPP's 350 HO crate engine—and a great, affordable alternative to rebuilding. This base crate engine package includes an assembled long block, including the oil pan. You finish it off your way, with the ignition system, induction system and additional accessories. SPECIFICATIONS: Engine: SP350/357 Base Horsepower: 357 hp at 5500 rpm Torque: 407 lbs.-ft. at 4000 rpm Compression Ratio: 9.0:1 nominal Block: Cast iron with 4-bolt main caps, 4.000 in. bore Crankshaft: Cast Nodular Iron Heads: Cast Iron; 64cc Chambers Valves: 1.940 in./1.500 in. Camshaft Lift: 0.473 in./0.473 in. Hydraulic Roller Duration at 0.050 in.: 215 degree/223 degree INSTALLATION NOTES: * Use the Holley 670 cfm 4-barrel carburetor P/N 19170092 to achieve the listed horsepower and torque * Requires intake manifold, carburetor, distributor, spark plug wires, and water pump to complete assembly * Requires feed line from fuel pump to carburetor * Not intended for marine applications * Balancer and flexplate are NOT included

5.0 out of 5 stars ( 2 )

$6,215.21

Summit Bucks

BluePrint Builder Series LS376/530HP Standard Edition EFI Crate Engine and TKX Transmission Combos

BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a polished pulley kit and TKX manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 5-speed TKX Transmission Package: * McLeod Super Street Pro twin-disc clutch * Hydraulic throwout bearing * Bellhousing * Non-weighted billet flywheel * Starter * Gear ratios are 2.87:1 (first), 1.89:1 (second), 1.28:1 (third), 1.00:1 (fourth), and 0.68:1 (fifth) * Torque converter with 2,200–plus rpm stall Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plug wires * Champion 3015 spark plugs (0.040 in. gap) * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys. Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.

Not Yet Reviewed

$22,449.00

Summit Bucks

BluePrint Builder Series LS427/625HP Standard Edition EFI Crate Engine and 4L65/70E Trans Combos

BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 625 horsepower, this standard edition builder series includes a polished pulley kit and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 565 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * OEM style (4.060 in. bored to 4.069 in.) * Main caps are 6-bolt * One-piece rear main seal Rotating Assembly: * New forged crankshaft * Stroke – 4.125 in. * Forged connecting rods (6.125 in.) * Forged pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.624 in. * Exhaust valve lift – 0.624 in. * Intake duration at 0.050 in. of lift – 239 * Exhaust duration at 0.050 in. of lift - 255 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * ECM supplied with calibration (initial and total timing are controlled by PCM) * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * All required (to make engine run) sensors and wiring harness (LS controller package only controls engine) * Unlocked ECU for local Dyno shop tuning refinement * LT4 87mm DBW (Drive-By-Wire) throttle body * Valve covers, retro-fit oil pan (fits most 1955-95 GM front engine, RWD, V8 cars), and timing cover * LS3 car intake manifold * Fuel injectors (42 lbs.) and return-less fuel rail * Coil packs * Spark plug wires * Gas/throttle pedal * Complete front accessory drive includes A/C, power steering, alternator, belts, and pulleys * ACDelco 41-985 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91-93 octane. Recommended oil is BPP710. Not designed for use with dry sump or pollution-controlled vehicles.

Not Yet Reviewed

$26,499.00

Chevrolet Performance 5.7L 350 C.I.D Turnkey Long Block Crate Engines

This Chevrolet Performance 5.7L 350 c.i.d. HO turnkey long block crate engine is assembled with brand new components from General Motors. Starting with a new GM 4-bolt main block, it includes the cast iron high-flow Vortec heads, dual-plane aluminum intake manifold, 9.0:1 compression ratio, and a hydraulic flat tappet camshaft that provides you 333 hp and 381 lbs.-ft. of torque. It includes a GM HEI distributor, a 670 cfm Holley carburetor, and is shipped with a 153-tooth small diameter flexplate. Engine specs: * Block: Cast Iron, 4-bolt main caps, 1-piece rear seal * Compression Ratio: 9.1:1 * Crankshaft: Cast Nodular, 3.480 in. Stroke * Duration at 0.050 I/E: 212 / 222 * Camshaft Lift: 0.435 in. / 0.460 in. Hydraulic Flat Tappet * Heads, Chamber Size: Vortec iron, 64cc * Horsepower: 330 hp at 5,000 rpm * Intake Manifold: Aluminum Dual Plane * Torque: 380 lbs.-ft. at 3,800 rpm * Valves (I/E) (in.): 1.940 / 1.600 * Condition: New

Not Yet Reviewed

$7,311.30

Summit Bucks

BluePrint Builder Series LS376/530HP Standard Edition EFI Crate Engine and 4L65/70E Trans Combos

BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a black pulley kit and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plugs and wires * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * Champion 3015 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.

Not Yet Reviewed

$21,199.00

—

$23,399.00

Summit Bucks

BluePrint Builder Series 302W/365HP Bronco Edition Carbureted Crate Engine and 4R70W Trans Combos

BluePrint Builder Series 302W/365HP Bronco Edition carbureted crate engine and 4R70W transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Ford small block-compatible 302 (c.i.d.) engine that produces 365 horsepower, this Bronco edition builder series includes a black pulley kit and 4R70W automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and steel crankshaft. Altogether, this assembly produces 365 lbs.-ft. of torque. When you need or want a new powertrain for your Ford Bronco, go with the authority in crate engines and their BluePrint Builder Series 302W/365HP Bronco Edition carbureted crate engine and 4R70W transmission combos. Other product features, items, and specifications include: Block: * New BluePrint high-strength cast iron * Increased deck thickness and strength webbing * Priority main oiling * Main caps are 4-bolt * Improved water jacket design * One-piece rear main seal Rotating Assembly: * Cast steel crankshaft * Stroke – 3.000 in. (and forged 5.090 in. connecting rods) * Hypereutectic pistons * Externally balanced BPP50 harmonic balancer Cylinder Heads: * BluePrint HP9009 models * Chamber – 60cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 190cc intake and 60cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.533 in. * Exhaust valve lift – 0.544 in. * Intake duration at 0.050 in. of lift – 215 * Exhaust duration at 0.050 in. of lift - 220 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * Initial is 10-16 degrees * Will be 34 degrees total at 3,500 rpm * Total is 32-34 degrees * Firing order is 1-3-7-2-6-5-4-8 Complete 4WD-ready 4R70W Transmission (built to 650 horsepower): * Electronic transmission controller (TPS not included due to variable installations) * Torque converter with 2,200 – 2,600 rpm stall * Flexplate * Starter * This 4-speed overdrive transmission with lockup is specifically prepped for a 1966-76 Dana 20 transfer case (sold separately) * Gear ratios are 2.84:1 (first), 1.55:1 (second), 1.00:1 (third), 0.70:1 (overdrive), and 2.32:1 (reverse) Other Components: * Dual plane aluminum intake manifold with satin finish * Carburetor (600 cfm) * Distributor * Valve covers * Rear sump oil pan * Billet aluminum front accessory drive with black finish (includes A/C and power steering) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Recommended fuel is 91 octane. Recommended oil is non-synthetic 10W30. Not designed for EGR compatibility.

Not Yet Reviewed

$18,699.00

Chevrolet Performance SP383 C.I.D EFI Long Block Crate Engines

Chevrolet Performance's HT383E crate engine is an affordable and more powerful direct replacement for the tired 350 engine in your 1996-99 full-size GM truck or SUV. The larger displacement delivers up to 323 hp at 4,200 rpm and a whopping 444 lbs.-ft. of torque. It's extra power you won't get with a stock-type rebuild or reconditioned used engine. Like the standard HT383, this crate engine starts with a cast iron block with four-bolt main caps, a forged steel crankshaft, a smooth hydraulic roller camshaft, and a set of iron Vortec heads. Its 9.1:1 compression ratio is perfect for regular gasoline at all altitudes and engine loads. It also includes a new water pump. The HT383E is designed to replace the L31 5.7L engine in half-ton models of the Silverado, Suburban, Tahoe, Sierra and Yukon. Simply swap the intake manifold, throttle body, exhaust manifolds, and other accessories from the original 350. It's an emissions-legal stroker for trucks! TECH SPECS for the Chevrolet Performance SP383 c.i.d. EFI long block crate engine: * Engine type: Chevy small block V8 * Displacement: 383 cu. in. * Bore x Stroke (in.): 4.005 x 3.800 * Block: Cast iron with 4-bolt main caps * Crankshaft: 4340 forged steel * Connecting rods: Heavy-duty PM steel * Pistons: Hypereutectic aluminum * Camshaft type: Hydraulic roller * Camshaft lift (in.): .431 intake / .451 exhaust * Camshaft duration (@.050 in.): 196° intake / 206° exhaust * Cylinder heads: Vortec iron; 64cc chambers * Valve size (in.): 1.940 intake / 1.500 exhaust * Compression ratio: 9.1:1 * Rocker arms: Stamped steel * Rocker arm ratio: 1.5:1 * Water pump: Cast-iron * Recommended fuel: Regular pump * Maximum recommended rpm: 5,000 * Flexplate: 12.750 in. * Balanced: External

Not Yet Reviewed

$12,682.14

Summit Bucks

BluePrint Builder Series 347W/415HP Mustang Edition EFI Crate Engine and 4R70W Transmission Combos

BluePrint Builder Series 347W/415HP Mustang Edition EFI crate engine and 4R70W transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Ford small block-compatible 347 (c.i.d.) engine that produces 415 horsepower, this Mustang edition builder series includes a polished pulley kit and 4R70W automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and steel crankshaft. Altogether, this assembly produces 415 lbs.-ft. of torque. When you need or want a new powertrain for your Ford Mustang, go with the authority in crate engines and their BluePrint Builder Series 347W/415HP Mustang Edition EFI crate engine and 4R70W transmission combos. Other product features, items, and specifications include: Block: * New BluePrint high-strength cast iron * Increased deck thickness and strength webbing * Priority main oiling * Main caps are 4-bolt * Improved water jacket design * One-piece rear main seal Rotating Assembly: * Cast steel crankshaft * Stroke – 3.400 in. * Forged I-beam 5.400 in. connecting rods * Forged pistons * Externally balanced BPP28 harmonic balancer Cylinder Heads: * BluePrint HP9009 models * Chamber – 60cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 190cc intake and 65cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.543 in. * Exhaust valve lift – 0.554 in. * Intake duration at 0.050 in. of lift – 218 * Exhaust duration at 0.050 in. of lift - 226 * Lobe separation angle (LSA) – 112 degrees Ignition Timing * Initial is 10-16 degrees * Will be 34 degrees total at 3,500 rpm * Total is 32-34 degrees * Firing order is 1-3-7-2-6-5-4-8 Complete 4R70W Transmission (built to 650 horsepower): * Electronic transmission controller and TPS breakout harness for integration with controller and EFI * Torque converter with 2,200 – 2,600 rpm stall * Flexplate * Starter * This is a 4-speed overdrive transmission with lockup * Gear ratios are 2.84:1 (first), 1.55:1 (second), 1.00:1 (third), 0.70:1 (overdrive), and 2.32:1 (reverse) Other Components: * Dual plane aluminum intake manifold with satin finish * Complete fuel injection system * Pro Billet distributor * Mustang valve covers (scripted "Mustang" may not match images; based on availability) * Oil pan with 7-quart capacity * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Factory 5 applications are a special order (must call). Recommended fuel is 91 octane. Recommended oil is non-synthetic 10W30. Not designed for EGR compatibility.

Not Yet Reviewed

$21,899.00

BluePrint Builder Series 632/815HP Blackout Reaper EFI Crate Engine and 4L80E Transmission Combos

BluePrint Builder Series 632/815HP Blackout Reaper EFI crate engine and 4L80E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy big block-compatible 632 (c.i.d.) engine that produces 815 horsepower, this Reaper edition builder series includes a black pulley kit and 4L80E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 775 lbs.-ft. of torque. When you need or want a new powertrain for your GM ride, go with the authority in crate engines and their BluePrint Builder Series 632/815HP Blackout Reaper edition EFI crate engine and 4L80E transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Bore is 4.600 in. * Main caps are 4-bolt * One-piece rear main seal * Mechanical fuel pump provision * Tall deck (approximately 0.400 in. taller and wider than OEM block) Rotating Assembly: * New BluePrint forged crankshaft * Stroke – 4.750 in. * Forged H-beam 6.635 in. connecting rods * Forged pistons * Internal balance * Non-weighted harmonic balancer Aluminum Cylinder Heads: * BluePrint PS8012 performance models (0.300 in. raised exhaust port vs. OEM) * Chamber – 119cc * Valves are 2.300 in. intake and 1.880 in. exhaust * Exhaust runners are 358cc intake and 125cc exhaust * Builder must verify clearance of exhaust, shift linkage, steering components, etc. before ordering Camshaft: * Hydraulic roller * Intake valve lift – 0.698 in. * Exhaust valve lift – 0.698 in. * Intake duration at 0.050 in. of lift – 272 * Exhaust duration at 0.050 in. of lift - 282 * Lobe separation angle (LSA) – 110 degrees Ignition Timing * Initial is 10-16 degrees (16-20 degrees for Dominator-style carburetors) * Total is 32-34 degrees (by 2,500 rpm for Dominator-style carburetors) * Firing order is 1-8-4-3-6-5-7-2 Automatic Transmission Package: * Complete 4L80E package with electronic controller (lockup capability) * Torque converter with 3,800–4,200 rpm stall * Non-weighted flexplate * Starter * Gear ratios are 2.482:1 (first), 1.482:1 (second), 1.000:1 (third), 0.750:1 (fourth), 2.077:1 (reverse) Other Components: * Single plane aluminum intake manifold with satin finish * Complete EFI system (1,250 cfm) with Aeromotive A1000 fuel pump * Valve covers, oil pan, and timing cover * Billet front accessory drive with black finish (includes alternator, A/C, power steering, water pump, pulleys, and belts) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Recommended fuel is 91 octane. Recommended oil is BPP710. Not designed for EGR-compatibility.

Not Yet Reviewed

$32,299.00

BluePrint Engines GM 383 C.I.D. 436 HP Dressed Stroker Long Block Crate Engines

Bolt some serious power into your ride with a BluePrint GM 383 c.i.d. 436 hp dressed Stroker long block crate engine. They're built from the ground up to provide a reliable 436 hp and 443 lbs.-ft. of torque to power your street rod, musclecar, or any other project that needs serious power. Each engine is hand-assembled and precision-balanced to ensure it will run smooth and strong for years to come. Three models are available; compare options and order the engine that best fits your needs. Product features and specifications: * 4-bolt main block * New cast crankshaft * Hypereutectic pistons * Chevy heavy beam rods with 150,000 psi bolts * Moly rings * Balanced rotating assembly * Melling high-volume oil pump * Hydraulic roller lifter camshaft * .544 intake / .555 exhaust * 230 intake / 236 exhaust duration at .050 * 110 degree lobe separation * Heavy-duty double roller timing set * Aluminum cylinder heads * Hardened retainers and springs * Swirl polished intake and exhaust valves * Hardened pushrods * Dual plane satin finish intake manifold * Carburetion * Distributor, plug wires and plugs * New valve covers * Dyno tested—and shipped with results

4.79 out of 5 stars ( 62 )

$8,199.00

ATK Marine Rebuilt Long Block Engines

ATK Marine Engines offers premium-quality rebuilt long block engines specifically for boating applications. These engines are designed to deliver maximum performance and long-term durability for your boat. Order the model recommended for your marine application. ATK Marine rebuilt engines include: * Special marine pistons and rings * Special marine camshaft * Marine gaskets * New intake and exhaust valves * New main, rod, and cam bearings * New valve lifters, rocker nuts, and swivels * Heavy-duty double roller timing chains * Cam sprocket * Crank gear * Freeze plugs

4.4 out of 5 stars ( 45 )

$2,997.99

Page 1 of 1