Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
21 Results Found For "COMP Cams Engine Break-In Oil 1590"
Showing In Stock Items. Show All 34 Items.
BluePrint Engines 302 C.I.D. Cruiser Base Crate Engines
BluePrint Engines 302 c.i.d. Cruiser base crate engines make an excellent choice for daily drivers and cruising. These crate engines make up to 16 inches of vacuum and are designed to work great with power brakes, stock torque converter, stock gearing, and run great on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * Cast iron crankshaft * 3.00 in. stroke * OEM 5.090 in. connecting rods * Hypereutectic pistons * 50oz external engine balance Cylinder heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial with 32-34 degrees total Also includes: * Valve covers * Oil pan * Timing cover * Dyno tested results shipped with engine
Not Yet Reviewed
$6,299.00
BluePrint Engines Ford 302 C.I.D. 361 HP Dressed Long Block Crate Engines
BluePrint Engines Ford 302 c.i.d. 361 HP dressed long block crate engines are ideal for daily drivers and cruising. Fully dressed, these engines makes up to 16 in. of vacuum and will work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression Ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * 3.000 in. stroke * OEM type 5.090 in connecting rods * Hypereutectic pistons * 50oz external balance Cylinder Heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial, 32-34 total Also includes (depending on part number): * Valve covers * Timing cover * Carburetor or Throttle Body * Spark plugs and wires * Distributor * Intake * Harmonic balancer * Dyno test results shipped with engine Note: Engine requires a V-belt standard rotation water pump and belt system. Timing cover is designed for standard rotation water pump only.
( 11 )
$6,899.00
—
$9,499.00
BluePrint Engines Ford 302 C.I.D. Bronco Edition 365 HP Long Block Crate Engines
BluePrint Engines Ford 302 c.i.d. Bronco Edition 365 hp long block crate engines are available with a carbureted or fuel injected system. The base dressed engines are loaded with impressive features: DESCRIPTION: * Horsepower and torque: 365 hp / 365 lbs.-ft. * Compression ratio: 9.5:1 * Aluminum heads * Hydraulic roller cam * Cast steel crank * Hypereutectic pistons BLOCK: * NEW BluePrint cast iron block * 4-bolt main * 4.000 in. bore * 1-piece rear main seal ROTATING ASSEMBLY: * Cast steel crankshaft * 3.000 in. stroke * OEM type 5.090 in. connecting rods * Hypereutectic pistons * 50 oz. external balance CYLINDER HEADS: * BluePrint aluminum cylinder heads - HP9009 * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners CAM SPECS: * Cam type: Roller * .533 Intake / .544 Exhaust * 215 Intake / 220 Exhaust duration * @ .050 - 114 degree lobe separation IGNITION TIMING: * 10-16 degrees initial, 32-34 total ALSO INCLUDES: * Bronco script valve covers * Harmonic balancer * Dual plane satin aluminum intake manifold * 600 cfm carburetor (model BP302MAXCTC) …. Or …. EFI system (model BP302MAXCTF) * Distributor * Painted oil pan NOTES: * Painted Ford Blue * Recommended break in oil for your BluePrint crate engine: BPP710 * Not for EGR * Engine timing cover is designed for standard rotation water pump ONLY * Valve cover breather not included. BluePrint Engines recommends PN B6AZ-6766-B * On EFI model: Holley Sniper EFI is NOT compatible with AOD trans. It does NOT have AOD kickdown lever.
Not Yet Reviewed
$7,799.00
—
$8,899.00
BluePrint Engines Ford 302 C.I.D. 365 HP Base Dressed Long Block Crate Engines
BluePrint Engines Ford 302 c.i.d. 365 hp base dressed long block crate engines are a fantastic swap option. Here are the specifications: -- 365 hp / 365 lbs.-ft. torque -- Compression ratio: 9.5:1 -- Aluminum heads -- Hydraulic roller cam -- Cast steel crank -- Hypereutectic pistons * BLOCK: New BluePrint cast iron block 4-bolt main 4.000 in. bore 1-piece rear main seal * ROTATING ASSEMBLY: Cast steel crankshaft 3.000 in. stroke OEM-type 5.090 in. connecting rods Hypereutectic pistons 50 oz. external balance * CYLINDER HEADS: BluePrint aluminum cylinder heads 60cc chamber 2.02 in. intake/1.60 in. exhaust valves 190cc intake/60cc exhaust runners * CAM SPECS: Cam Type: Roller .533 Intake / .544 Exhaust 215 Intake / 220 Exhaust duration @ .050 - 114-degree lobe separation * IGNITION TIMING: 10-16 degrees initial, 32-34 total * ALSO INCLUDES: Bronco Script valve covers Harmonic Balancer * NOTES: -- Painted Ford Blue -- Recommended break-in oil for your BluePrint crate engine: BPP710 -- Not for EGR -- Engine timing cover is designed for standard rotation water pump ONLY -- Valve cover breather not included. BluePrint Engines recommends PN B6AZ-6766-B or similar
Not Yet Reviewed
$7,199.00
ATK High Performance GM 350 345 HP Stage 1 Long Block Crate Engines
ATK High Performance GM 350 345 hp/400 lbs.-ft. Stage 1 long block crate engines are classics with great street manners, and vacuum to power all your accessories. These Stage 1 or base engines are designed for those that may have their own component parts already, and who also are interested in completing out the build themselves. Typically ATK GM 350 345 hp base long block engines consist of: * Seasoned OE short block with 4-bolt mains * OE cast crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic pistons * Moly piston rings * Hydraulic roller camshaft * 220/224 at .050 in. * .495 in./502 in. lift 110 LSA * ATK cast iron cylinder heads * 76cc combustion chambers * 165cc intake runners * 1.94 in./1.5 in. valves * Stamped steel 1.5 ratio rocker arms * Valve covers * Timing set and cover * Oil pan, high volume oil pump with pick-up tube
( 13 )
$3,198.99
ATK High Performance Ford 302 Stock Drop-In Long Block Crate Engines
Classic Ford 302 stock drop-in long block crate engines from ATK High Performance are shipped to you fully dressed. These are basic stock engines with moderate horsepower and torque based off the 80-86 Ford 302 engine. These engines typically make about 240 horsepower on the dynamometer. Additional specs: * Block: seasoned OE roller block * Bore/Stroke: up to 4.060 x 3.000 * Displacement: 302 c.i.d. * Crankshaft: OE Ford cast late model crankshaft (50 oz. imbalance) * OE steel connecting rods 5.4 in. stock bolts * Pistons: hypereutectic * Piston rings: moly rings * Compression Ratio: 8.5:1 * Camshaft: hydraulic flat tappet * Camshaft specifications: OE stock * Camshaft bearings installed and blocked to OEM position * Cylinder heads: OE cast iron * Freeze plugs: brass installed and sealed * Rocker arms: stamped steel 1.5 ratio * Oil galley plugs: installed and sealed * Oil pan: OE 5 qt. front sump * Weight: 430 lbs. * For engine break-in please follow the ATK break-in procedure that is included with the engine.
( 32 )
$3,998.99
ATK High Performance GM 350 345 HP Stage 2 Long Block Crate Engines
Give your old ride new life with these ATK High Performance GM 350 345 hp/400 lbs.-ft. Stage 2 long block crate engines. These engines are built to perform and look great without breaking your budget. Each engine is expertly assembled, balanced, blueprinted, and topped with quality components, making it a solid, reliable mill to power your muscle car, street rod, or pickup. ATK GM 350 345 hp Stage 2 long block crate engines include: * Handpicked, OE remanufactured block * ATK cast iron 75cc/165cc 1.94/1.50 cylinder heads * ATK dual plane intake manifold * OE crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic pistons * Moly rings * Hydraulic roller camshaft .495in/.502ex 110LSA * Stamped steel 1.5 ratio rocker arms * HEI distributor, plug wires and plugs * Valve covers * Timing cover and double roller timing set * 5 qt. oil pan, high volume oil pump with pickup tube * OE style long water pump * PowerBond 8 in. balancer and 168 tooth flexplate
( 2 )
$3,635.99
ATK High Performance GM 350 Vortec 290 HP Stage 3 Long Block Crate Engines
ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires
( 9 )
$3,625.99
ATK High Performance GM 540 660 HP Stage 3 Long Block Crate Engines
Smash the competition or terrorize the street with ATK High Performance GM 540 660 hp Stage 3 long block crate engines. They are built around a rock-solid bottom-end and a free-breathing top-end to create a beast that is capable of 660 hp and 690 ft.-lbs. of tire-shredding power. ATK hand-assembles each of these mills out of top-of-the-line components to make them strong enough for the track, but reliable enough for street use, so you get the best of both worlds. ATK GM 540 660 hp Stage 3 crate engines include: * Dart Big M block * High performance aluminum cylinder heads * Intake manifold * Carburetion * 4340 forged steel crankshaft and H-beam connecting rods * Forged pistons * Hydraulic roller camshaft * Cam lift- .640 int./.640 exh. * Cam duration @ 0.50- 243 int./249 exh. * 10.0:1 compression * Distributor, plug wires, plugs * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube * Water pump * Front damper and flexplate
Not Yet Reviewed
$14,998.99
ATK High Performance Pro Street 632 800 HP Dressed Crate Engines
ATK High Performance Pro Street 632 c.i.d. 800 hp completely dressed crate engines are sure to turn heads! Hand built; they are stuffed with name brand quality components you can trust to ensure performance. Engine specifications: * Block: Dart Big M 10.2 deck, 4-bolt main, 2-piece seal * Bore/stroke: 4.600 in. x 4.750 in. * Displacement: 632 * Crankshaft: Scat 4340 forged internal balance * Rods: Scat 4340 forged H-beam with ARP 8740 bolts * Pistons: Forged 10.3:1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: 267/277 at 50 .680 intake/.680 exhaust 110LSA * Timing chain: Double roller * Cylinder heads: Dart Pro 1 aluminum 121cc/345cc 2.300/1.880 * Rocker arms: Howards billet aluminum 1.7 roller rockers * Oil pan: Moroso 7 qt. street/strip pan with windage tray * Oil pump: Melling high volume * Balancer: Power Bond SFI 7.950 in. * Intake manifold: Edelbrock Super Victor * Distributor: Pro billet (iron gear) * Carburetor: Quick Fuel 1150 cfm mechanical secondary * Spark plugs: Autolite #3934 * Spark plug wires: 8mm
Not Yet Reviewed
$16,499.99
BluePrint Engines GM 327 C.I.D. 350 HP Deluxe Dressed Long Block Crate Engines
BluePrint Engines GM 327 c.i.d. 350 hp fully dressed long block crate engines are available with a Holley Sniper EFI system or a 670 cfm carburetor with electric choke. BASIC ENGINE SPECS: * HP and torque: 350 hp / 350 lbs.-ft. * Compression ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Forged crank * Hypereutectic pistons BLOCK: * NEW BluePrint cast iron block * 4-bolt main * 4.000 in. bore * 1-Piece rear main seal * Mech fuel pump provision: Yes * Passenger side dipstick * Drilled and tapped for clutch linkage ROTATING ASSEMBLY: * New BluePrint forged crankshaft * 3.250 in. stroke * Forged 5.700 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internal Front / External Rear CYLINDER HEADS: * BluePrint aluminum cylinder heads * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners CAM SPECS: * Cam Type: Roller * .495 Intake .502 Exhaust * 220 Intake / 224 Exhaust duration * At .050, 114 degree lobe separation angle IGNITION TIMING: * 32-34 degrees total at 3500 rpm ALSO INCLUDES: * Premium Vintage valve covers * Premium Vintage air cleaner * 6.75 in. harmonic balancer * Spark plugs * Under header spark plug wires (perfect for Rams Horn exhaust manifolds) * Oil pan * Timing cover * Aluminum Intake manifold * Small cap ready-to-run distributor equipped with Tach Drive and coil * Dyno tested and shipped with results * Warranty: 30 month / 50,000 mile NOTES: * Not for use in pollution-controlled vehicles.
Not Yet Reviewed
$8,499.00
ATK High Performance GM 350 330 HP Stage 1 Long Block Crate Engines
Give your ride new life with ATK High Performance GM 350 330 hp/380 lbs.-ft. Stage 1 long block crate engines. These engines are based on the tried-and-true small block Chevy and are built to perform right out of the box. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, worn down engine or just looking for a little more performance, ATK has you covered. Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * ATK cast iron cylinder heads * 76cc chambers * 165cc intake runners * 1.94 in./1.5 in. valves * Stamped steel 1.5 ratio rocker arms * OE crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic flat-top pistons * Moly rings * Hydraulic flat tappet camshaft * 465 int./.488 exh. cam lift * 224 int./234 exh. cam duration at 0.50 * 9.1:1 compression * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube
( 16 )
$3,099.99
ATK High Performance GM 350 Vortec 350 HP Stage 1 Long Block Crate Engines
Give your car or truck a little more punch with ATK High Performance GM 350 Vortec 350 hp Stage 1 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. ATK GM 350 Vortec 350 hp Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * Cast iron Vortec cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube
( 7 )
$3,334.99
ATK High Performance GM 350 Vortec 350 HP Stage 3 Long Block Crate Engines
Give your car or truck a little more punch with ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. Engine Specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 *Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
( 1 )
$4,624.99
Ford Performance Parts Megazilla Crate Engines
The Ford Performance Parts engine team has unleased the 7.3L Megazilla crate engine! The Megazilla features the Ford Performance 7.3L intake manifold, CNC-ported cylinder heads, forged pistons and connecting rods. The Megazilla crate engine cranks out 612 hp and 670 lbs.-ft. of torque in a streetable package running on premium pump gas. Megazilla crate engine features: * 7.3L displacement * 10.5:1 compression * (M-6049-SD73P/M-6050-SD73P) CNC-ported aluminum cylinder heads * (M-9424-73LP) low-profile intake manifold * (M-9926-M5292) 92mm throttle body * Mahle forged pistons * Callies H-beam forged connecting rods * (M-6303-SD73) production steel crankshaft * (M-6250-SD73A) hi-performance 7.3L camshaft w/ VCT delete * (M-6010-SD73) production cast iron block Peak power output (J607 standard): * 612 hp @ 5,580RPM * 670 lbs.-ft. of torque @ 3,920RPM * Over 500 lbs.-ft. of torque from 2,500 rpm to 6,000 rpm Assembly includes: * Coils/plug wires/spark plugs * Production oil pan * (M-6038-73) shipping/storage cradle * Production engine wiring harness Additional information: * Bellhousing bolt pattern same as the Ford 4.6/5.4 and Coyote 5.0L * For control packs, please refer to part number: M-6017-73M and M-6017-73A (sold separately) * Custom calibration required * For starter, please refer to part number: M-11000-SD73 (sold separately) * For FEAD, please refer to part number: M-8600-SD73 and M-8600-SD73AC (sold separately) This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways is likely to violate U.S. and Canadian laws and regulations relating to motor vehicle emissions.
Not Yet Reviewed
$23,397.99
BluePrint Engines Marine GM 383 C.I.D. 405 HP Base Stroker Long Block Engines with Cast Components
Do you need a replacement engine for your boat? Try one of these BluePrint Engines marine GM 383 c.i.d. 405 hp stoker long block crate engines to get the job done. They feature quality-built components designed for marine use. BluePrint engines are built for speed on the open water, performance, and reliability, all in one package. Block: * 4-bolt main block * Passenger side dipstick * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 in. straightness and roundness * Cylinders are sonic tested for thickness Rotating assembly: * SCAT cast iron crankshaft * Keith Black hypereutectic pistons * GM heavy beam connecting rods * Hastings moly rings * Balanced rotating assembly * Melling high-volume oil pump * COMP Cams roller lifter camshaft * Heavy-duty double roller timing set Cylinder heads: * Cast iron Vortec heads * Hardened retainers and springs * 2.02 in. swirl-polished intake valves * 1.60 in. swirl-polished exhaust valves * Hardened pushrods * Brezinski cast iron marine intake manifold * 9.5 to 1 compression * BluePrint Signature Series polished aluminum valve covers * Rubber coated steel oil pan * Chrome timing chain cover * Long slot rocker arms with positive locking nuts * Dyno-tested--and shipped with results
( 1 )
$7,499.00
ATK High Performance Ford 302 300 HP Stage 2 Long Block Crate Engines
Replace your old, tired mill with ATK High Performance Ford 302 300 hp Stage 2 long block crate engines to give your old ride new life. These engines are designed to be perfect replacements for your old 302, but with a bit more kick. The upgraded engines produce 300 hp and 336 ft.-lbs., while still maintaining a smooth idle and great driving manner. These mills are perfect for daily drivers or mild-mannered street rods. Ford 302 300 hp Stage 2 long block crate engines feature: * Handpicked, remanufactured blocks * OE cast iron cylinder heads * Intake manifold * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .498 int./.498 exh. * Cam duration @ 0.50- 219 int./219 exh. * 9.0:1 compression * Distributor * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube * Water pump * Front damper and flexplate
( 4 )
$4,210.99
Quicksilver Circle Track Crate Engines
Torque wins races. Reliability wins championships. Quicksilver Circle Track crate engines are designed to deliver on both counts. These small-block V8 engines are factory sealed for fair competition and will deliver season after season of reliable racing performance with minimal maintenance, while producing full power on pump gasoline. To comply with popular stock-class racing rules, Quicksilver Circle Track engines are shipped with factory seals on the intake, front cover, oil pan, and cylinder heads. Built with premium quality components, they feature a roller camshaft design and offer the best value for dirt and asphalt Circle Track racing. Order the engine needed for your build. Features: * Durable GM Gen+ remanufactured cast iron blocks -- Cost-effective and durable solution for this application -- Single-piece rear main seal -- 8-bolt 4-barrel aluminum intake manifold -- 6-quart oil pan * Roller camshaft * Hydraulic lifters * Stainless steel valves, hardened valve seats, head gaskets with stainless steel fire rings, and heavy-duty marine valve springs for extended life * 6 in. SFI-approved balancer * For off-road racing only * Shipped with a fresh fill of Quicksilver Performance Racing 25W-40 synthetic blend oil
Not Yet Reviewed
$7,079.99
—
$12,105.99
BluePrint Engines Chrysler 408 Stroker 375 HP Value Power Base Long Block Crate Engines
Budget minded hotrodders rejoice! BluePrint Engines Chrysler 408 Stroker 375 hp Value Power base long block crate engines are for you. BluePrint developed these engines for those wanting reliable stroker power without breaking the bank. Each mill is hand assembled and balanced to ensure it will run smooth and strong, just what you need in your muscle car. Includes: * Handpicked, seasoned and machined blocks * Performance Magnum cast iron cylinder heads * Cast iron crankshaft and heavy beam connecting rods * Forged pistons * Hydraulic flat tappet camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube
( 8 )
$8,399.00
BluePrint Builder Series 302W/370HP Standard Edition Crate Engine and 4R70W Transmission Combos
BluePrint Builder Series 302W/370HP Standard Edition crate engine and 4R70W transmission combos take away the hassle of properly pairing a carbureted Ford 302 Windsor mild performance engine and 4-speed automatic transmission for your build. These strong assemblies deliver 370 horsepower and 350 lbs.-ft. of torque with BluePrint aluminum cylinder heads and hydraulic roller camshaft to go with hypereutectic pistons, a steel crankshaft, and OEM-style connecting rods. The front accessory drive includes air conditioning and power steering provisions for the high strength cast iron block which features increased deck thickness and strength webbing. When you are looking for a new powertrain, go with the authority in crate engines and order your very own BluePrint Builder Series 302W/370HP Standard Edition crate engine and 4R70W transmission combo. More product features and details include: * Compression ratio of 9.5:1 * Camshaft offers 0.543 in. intake and 0.544 in. exhaust lift with 215 intake and 228 exhaust duration at 0.050 in. lift and a 112 LSA * Stroke is 3.000 in. with 5.090 in. long connecting rods * Block is a one-piece rear main seal, 4-bolt main setup with improved water jacket design * Ford rotating assembly is machined and balanced by BluePrint (50 oz. external balance) * BluePrint HP9009 cylinder heads provide a 60cc combustion chamber, 2.020 in. intake and 1.600 in. exhaust valves, plus 190cc intake/60cc exhaust runners * Ignition timing is 34 degrees total at 3,500 rpm * This combo also includes the 600 cfm carburetor, fuel pump, dual plane satin finished aluminum intake manifold, water pump, spark plugs/wires, valve covers, distributor (bronze gear not recommended), harmonic balancer, thermostat with housing, and a painted oil pan * Spark plug model BPP7938 NGK 7938 BKR5E (0.750 in. reach, 14mm thread, 5/8 in. hex, plug; gapped to 0.035 in.) * Harmonic balancer model BPP50 (50 oz., 6.4 in. diameter) Transmission features and details include: * Electronic transmission controller * Overdrive 4-speed with lockup built to 650 horsepower * Torque converter with 2,200-2,600 rpm advertised stall rating * Flexplate (50 oz. weighted) and starter * Gear ratios are 2.84:1 (first), 1.55:1 (second), 1.00:1 (third), 0.70:1 (overdrive), and 2.32:1 (reverse) * May require modifications/replacement of driveshaft, transmission mounts, exhaust routing, etc. * Throttle position sensor not included due to base setup being used for both carbureted and EFI versions Other notes: * Factory Five applications are a special order * Recommended fuel is 91 octane and recommended break-in oil is BPP710 * Initial timing is 10-16 degrees * Total timing is 32-34 degrees * Firing order is 1-3-7-2-6-5-4-8 * Painted Ford Blue * Not for EGR * Recommended headers include those made by Ultimate Headers, Hedman Husler race headers, and Sanderson headers
Not Yet Reviewed
$18,499.00
ATK High Performance Ford 302 300 HP Stage 1 Long Block Crate Engines
Replace your old, tired mill with ATK High Performance Ford 302 300 hp Stage 1 long block crate engines and give your old ride new life. These engines are designed to be perfect replacements for your old 302, but with a bit more kick. The upgraded engines produce 300 hp and 336 ft.-lbs., while still maintaining a smooth idle and great driving manner. These mills are perfect for daily drivers or mild-mannered street rods. Ford 302 300 hp Stage 1 long block crate engines feature: * Handpicked, remanufactured blocks * OE cast iron cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .498 int./.498 exh. * Cam duration @ 0.50- 219 int./219 exh. * 9.0:1 compression * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube
( 12 )
$3,639.99
