Engine Assemblies Engines & Components - ls KEYWORD - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

BluePrint Engines Pro Series Chevy LS 376 C.I.D. 530 HP Long Block Crate Engines

BluePrint Engines provides a Dyno Promise with results and bragging rights. They make sure they hit their target horsepower and proper torque with every crate engine, utilizing an advanced computerized balancer to get rotating assemblies within 2 grams, ensuring silky smooth power over the entire rpm range. According to BluePrint, that's precisely why their engines sound and run better than the competitors. Accompanying your BluePrint Engines Pro Series Chevy LS 376 c.i.d. 530 hp long block crate engine will be a comprehensive, dyno-generated printout showing its critical specs. No more guessing what the real-world peak horsepower and torque ratings are. Any doubters in the crowd? Simply flash them your dyno results! BluePrint Engines Pro Series Chevy LS 376 c.i.d. crate engine: * Horsepower and torque: 530hp/495 lb.-ft. * Compression ratio: 10.7:1 * BluePrint Engines LS3 aluminum cylinder heads -- 69cc chamber -- 2.165 in. intake/1.590 in. exhaust valves -- 259cc intake/102cc exhaust runners * Hydraulic roller camshaft: -- .612 intake/.585 exhaust lift -- 225 intake/238 exhaust duration at .050 in. -- 113-degree lobe separation angle -- 3-bolt cam * Nodular iron crankshaft -- 3.622 in. stroke -- Forged 6.125 in. rods * Hypereutectic pistons * BluePrint Engines high-strength cast iron 6.2L block -- Increased deck thickness and strength webbing -- Extended cylinder skirt -- Priority main oiling -- 4.0662 in. bore -- 6-bolt main -- 1-piece rear main seal -- Improved water jacket design -- Utilizes OEM LS3 front and rear covers * LS valve cover * LS swap oil pan * Harmonic balancer Note: Controlled by customer provided ECU.

Not Yet Reviewed

$8,299.00

BluePrint Engines Pro Series Chevy LS 376 C.I.D. 530 HP EFI Base Dressed Long Block Crate Engines

BluePrint Engines provides a Dyno Promise with results and bragging rights. They make sure they hit their target horsepower and proper torque with every crate engine, utilizing an advanced computerized balancer to get rotating assemblies within 2 grams, ensuring silky smooth power over the entire rpm range. According to BluePrint, that's precisely why their engines sound and run better than the competitors. Accompanying your BluePrint Engines Pro Series Chevy LS 376 c.i.d. 530 hp EFI base dressed long block crate engine will be a comprehensive, dyno-generated printout showing its critical specs. No more guessing what the real-world peak horsepower and torque ratings are. Any doubters in the crowd? Simply flash them your dyno results! These long block engines are available with or without complete engine controller with ECU, harness, throttle pedal, and sensors. Select the one you want. BluePrint Engines Pro Series Chevy LS EFI base dressed engine: * Horsepower and torque: 530hp/495 lb.-ft. * Compression ratio: 10.7:1 * BluePrint Engines LS3 aluminum cylinder heads -- 69cc chamber -- 2.165 in. intake/1.590 in. exhaust valves -- 259cc intake/102cc exhaust runners * Hydraulic roller camshaft: -- .612 intake/.585 exhaust lift -- 225 intake/238 exhaust duration at .050 in. -- 113-degree lobe separation angle -- 3-bolt cam * Nodular iron crankshaft -- 3.622 in. stroke -- 6.125 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * BluePrint Engines high-strength cast iron 6.2L block -- Increased deck thickness and strength webbing -- Extended cylinder skirt -- Priority main oiling -- 4.0662 in. bore -- 6-bolt main -- 1-piece rear main seal -- Improved water jacket design -- Utilizes OEM LS3 front and rear covers * LS swap oil pan * Harmonic balancer (Short Corvette style) * DBW throttle body * Available with a GM plastic or fabricated intake manifold * Fuel injectors and rail * Coil packs * Spark plugs and wires * Water pump

4.0 out of 5 stars ( 4 )

$10,199.00

—

$14,099.00

BluePrint Engines Pro Series Chevy LS 427 C.I.D. 605 HP EFI Base Dressed Long Block Crate Engines

BluePrint Engines provides a Dyno Promise with results and bragging rights. They make sure they hit their target horsepower and proper torque with every crate engine, utilizing an advanced computerized balancer to get rotating assemblies within 2 grams, ensuring silky smooth power over the entire rpm range. According to BluePrint, that's precisely why their engines sound and run better than the competitors. Accompanying your BluePrint Engines Pro Series Chevy LS 427 c.i.d. 605 hp EFI base dressed long block crate engine will be a comprehensive, dyno-generated printout showing its critical specs. No more guessing what the real-world peak horsepower and torque ratings are. Any doubters in the crowd? Simply flash them your dyno results! These long block engines are available with or without LS engine controller package with wiring harness and gas pedal. Select the one you want. BluePrint Engines Pro Series Chevy LS EFI base dressed engine: * Horsepower and torque: 605 hp/565 lb.-ft. * Compression ratio: 11:1 * BluePrint Engines LS3 aluminum cylinder heads -- 69cc chamber -- 2.165 in. intake/1.590 in. exhaust valves -- 259cc intake/102cc exhaust runners * Hydraulic roller camshaft: -- .624 intake/.624 exhaust lift -- 239 intake/255 exhaust duration at .050 in. -- 114-degree lobe separation angle -- 3-bolt cam * Forged steel crankshaft -- 4.125 in. stroke -- 6.125 in. connecting rods * Forged pistons * BluePrint Engines high-strength cast iron 6.2L block -- Increased deck thickness and strength webbing -- Extended cylinder skirt -- Priority main oiling -- 4.0685 in. bore -- 6-bolt main -- 1-piece rear main seal -- Improved water jacket design -- Utilizes OEM LS3 front and rear covers * LS swap oil pan * Harmonic balancer * DBW throttle body * Available with a GM plastic or fabricated intake manifold * #42 fuel injectors and returnless fuel rail * Coil packs * Spark plugs and wires * Valve covers * Timing cover

Not Yet Reviewed

$15,599.00

—

$17,499.00

BluePrint Engines Pro Series Chevy LS 376 C.I.D. 510 HP EFI Deluxe Dressed Long Block Crate Engines

One of the most popular engine platforms for street cars and restomods is an LS-compatible design, and BluePrint's GM LS-compatible 376 c.i.d. Pro Series engines deliver 510 hp and 440 lb.-ft. of torque to provide proven power and versatility. These deluxe dressed crate engines feature LS3-style aluminum cylinder heads, a 10.7:1 compression ratio, hydraulic roller cam, hypereutectic pistons, and a nodular iron crankshaft housed in a BluePrint high-strength cast iron block. Available with a polished or black finished pulley kit, select the crate engine preferred to build some serious performance for your vehicle. Specs and features: * BluePrint Engines high-strength cast iron (LSX-style) block -- Increased deck thickness and strength webbing -- Utilizes OEM LS3 front and rear covers -- Improved water jacket design -- Extended cylinder skirt -- Priority main oiling -- One-piece rear main seal -- 6-bolt main -- 4.0662 in. bore * Rotating assembly: -- Nodular iron crankshaft -- 3.622 in. stroke -- 6.098 in. connecting rods with 150,000 psi bolts -- BluePrint hypereutectic pistons -- Internally balanced front and rear * BluePrint LS3 aluminum cylinder heads: -- 69cc chamber -- 2.165 in. intake/1.590 in. exhaust valves -- 259cc intake/102cc exhaust runners * BluePrint hydraulic roller camshaft: -- .612 intake/.585 exhaust lift -- 225 intake/238 exhaust duration at .050 -- 113-degree lobe separation * Additional components: -- Fuel injection ECU and wiring harness -- Drive-by-wire throttle body -- LS3 cast aluminum intake manifold -- LS swap oil pan -- Water pump -- Injectors and fuel rail kit -- Spark plugs and wires -- Harmonic balancer -- Timing cover -- Valve covers -- Coil packs * Polished or black front accessory drive: -- LT1-style water pump -- Type II power steering pump with remote reservoir -- LT1-style 140-amp alternator -- 7B10 peanut-style air conditioning compressor

Not Yet Reviewed

$13,799.00

ATK High Performance Chevy LS 408 Short Blocks

These ATK High Performance Chevy LS 408 short blocks are made to handle some serious power. The foundation of any high performance engine is a rock-solid short block, so ATK designed and developed these to be just that. They feature a fully forged, balanced, and blueprinted rotating assembly that is available in a variety of configurations to fit naturally aspirated, nitrous, and forced induction builds, as well as those with 24 and 58-tooth cranks. These ATK High Performance Chevy LS 408 short blocks include the following: * GM LS Iron blocks * Aligned and hone main bores * Manley 4340 forged crankshaft * 4.00 in. stroke * Manley 4340 H-beam connecting rods * Manley forged pistons

5.0 out of 5 stars ( 4 )

$5,143.99

BluePrint Engines Pro Series Chevy LS 376 C.I.D. 495 HP EFI Truck Long Block Crate Engines

BluePrint Engines Pro Series Chevy LS 376 c.i.d. 495 hp EFI truck long block crate engines are fully Dyno tested, passed vigorous inspections, and are prepared for those wanting maximum horsepower and durability. Features, specs, and contents: * 495 hp, 490 ft.-lb., compression ratio 10.7:1 * Cast Iron block with 6-bolt main * Nodular iron crankshaft * Connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internal balanced rotating assembly * BluePrint LS3 aluminum cylinder heads -- 69cc chamber -- 2.165 in. intake/1.59 in. exhaust valves -- 259cc intake/102cc exhaust runners * BluePrint hydraulic roller cam -- .553 intake/.553 exhaust lift -- 218 intake/224 exhaust duration at .050 -- 113-degree lobe separation, 110ICL * L92 truck intake manifold * Fuel injectors and rail * Truck water pump * Truck harmonic balancer * LS low-profile aluminum oil pan * GM-style smart coil packs * Spark plugs and wires * Valve covers * Oil pump * Dipstick

Not Yet Reviewed

$10,949.00

BluePrint Engines Pro Series Chevy LS 427 C.I.D. 625 HP EFI Drop-In Base Long Block Crate Engines

Swap out your powerplant with one of these BluePrint Engines Pro Series Chevy LS 427 c.i.d. EFI drop-in base long block crate engines. They put down an impressive 625 hp and 565 lbs.-ft. of torque! Featuring a 30-month/50,000-mile warranty, they're the perfect choice for drivable and reliable high-end performance. Additionally, BluePrint Pro Series Chevy 427 c.i.d. dressed long block crate engine assemblies are manufactured under strict tolerances and provide outstanding, consistent results. They include a 58X Gen IV reluctor wheel and sensors. Long block crate engine features include: * New GM LS engine block * 4340 forged 4.125 in. stroke crankshaft * 4340 forged 6.125 in. long connecting rods * Forged pistons * 11.0:1 compression * Hydraulic roller camshaft, .624 in. lift intake, .624 in. lift exhaust, 239 intake/255 exhaust duration @ .050 in. lift, with 114 degree lobe separation * Aluminum GM LS cylinder heads * Single roller timing chain * GM LS intake manifold * Full roller rocker arms * ECM Controlled (not included - customer must reprogram)

Not Yet Reviewed

$12,949.00

BluePrint Engines Pro Series Chevy LS 427 C.I.D. 625 HP Carbureted Retrofit Long Block Crate Engines

BluePrint Engines Pro Series Chevy LS 427 c.i.d. carbureted retrofit dressed long block crate engines put down a whopping 625 hp and 550 lbs.-ft. of torque! They feature a 30-month/50,000-mile warranty and are the perfect choice for drivable and reliable high-end performance. Additionally, these engines are manufactured under strict tolerances and provide outstanding, consistent results. All of the rotating assemblies are balanced to within 2 grams on a computerized balancer. BluePrint Pro Series long block crate engines are also dyno-tested and include the dyno sheets. Long block crate engine features include: * New GM LS engine block * 4340 forged 4.125 in. stroke crankshaft * 4340 forged 6.125 in. long connecting rods * Forged pistons * 11.0:1 compression * Hydraulic roller camshaft, .624 in. lift intake, .624 in. lift exhaust, 239/255 intake/exhaust duration at .050 in. lift with 114 degree lobe separation * Aluminum GM LS cylinder heads * Single roller timing chain * Aluminum single plane intake manifold * Full roller rocker arms * Carburetor * Ignition coil packs * Spark plug wires * Spark plugs * Harmonic balancer

3.0 out of 5 stars ( 2 )

$14,049.00

Chevrolet Performance LSX 454 Long Block Crate Engines

Chevrolet Performance LSX 454 long block crate engines are built with an all-forged, super-tough rotating assembly and feature a pair of new deep-breathing LSX 6-bolt cylinder heads. They also come dressed with great looking, all-new orange powdercoated valve covers with an engraved LSX 454 logo. With a carburetor and high-flow Chevrolet Performance intake manifold (sold separately), these engines are good for about 627 hp and 586 lbs.-ft. of torque. Due to the number of application variations, the LSX 454 crate engines do not include an oil pan, and the valve covers do not include provisions for mounting the ignition coil brackets. Other specifications include: * 4.185 in. bore * 4.125 in. stroke * Cast iron LSX Series block with cross-bolted 6-bolt main caps * Forged steel crankshaft * Forged steel connecting rods * Forged aluminum 11.0:1 compression pistons * Hydraulic roller camshaft * 0.635 in. lift intake/0.635 in. lift exhaust, 236 intake/246 exhaust duration at .050 in. lift * Aluminum LSX-LS7 cylinder heads with 70cc chambers * 1.8:1 aluminum roller rocker arms * 58-tooth reluctor wheel

4.0 out of 5 stars ( 1 )

$16,836.20

Chevrolet Performance LS3 6.2L 376 C.I.D 430 HP Fully Dressed Long Block Crate Engines

Chevrolet Performance LS3 6.2L 376 c.i.d. 430 hp long block crate engines use an impressive 10.7:1 compression ratio to put out 430 hp at 5,900 rpm and 425 lbs.-ft. of torque at 4,600 rpm. They feature a cast aluminum engine block with a nodular iron crankshaft, powdered metal connecting rods, and hypereutectic pistons. The steel hydraulic roller camshaft has a .551 in. intake and .522 in. exhaust valve lift with 204 degrees intake and 211 degrees exhaust valve duration at .050 in. cam lift. Long block crate engines also include: * Ignition coil packs * Spark plug wires * Spark plugs * Intake manifold * Fuel injectors * Throttle body * Front timing cover * Aluminum water pump * Harmonic balancer * Passenger side right hand dipstick and tube

Not Yet Reviewed

$10,317.33

BluePrint Builder Series LS376/530HP Standard Edition EFI Crate Engine and 4L65/70E Trans Combos

BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a black pulley kit and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plugs and wires * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * Champion 3015 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.

Not Yet Reviewed

$23,399.00

—

$23,499.00

BluePrint Builder Series LS427/625HP Standard Edition EFI Crate Engine and 4L65/70E Trans Combos

BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 625 horsepower, this standard edition builder series includes a polished pulley kit and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 565 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * OEM style (4.060 in. bored to 4.069 in.) * Main caps are 6-bolt * One-piece rear main seal Rotating Assembly: * New forged crankshaft * Stroke – 4.125 in. * Forged connecting rods (6.125 in.) * Forged pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.624 in. * Exhaust valve lift – 0.624 in. * Intake duration at 0.050 in. of lift – 239 * Exhaust duration at 0.050 in. of lift - 255 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * ECM supplied with calibration (initial and total timing are controlled by PCM) * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * All required (to make engine run) sensors and wiring harness (LS controller package only controls engine) * Unlocked ECU for local Dyno shop tuning refinement * LT4 87mm DBW (Drive-By-Wire) throttle body * Valve covers, retro-fit oil pan (fits most 1955-95 GM front engine, RWD, V8 cars), and timing cover * LS3 car intake manifold * Fuel injectors (42 lbs.) and return-less fuel rail * Coil packs * Spark plug wires * Gas/throttle pedal * Complete front accessory drive includes A/C, power steering, alternator, belts, and pulleys * ACDelco 41-985 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91-93 octane. Recommended oil is BPP710. Not designed for use with dry sump or pollution-controlled vehicles.

Not Yet Reviewed

$26,499.00

ATK Marine Rebuilt Long Block Engines

ATK Marine Engines offers premium-quality rebuilt long block engines specifically for boating applications. These engines are designed to deliver maximum performance and long-term durability for your boat. Order the model recommended for your marine application. ATK Marine rebuilt engines include: * Special marine pistons and rings * Special marine camshaft * Marine gaskets * New intake and exhaust valves * New main, rod, and cam bearings * New valve lifters, rocker nuts, and swivels * Heavy-duty double roller timing chains * Cam sprocket * Crank gear * Freeze plugs

4.4 out of 5 stars ( 45 )

$5,542.99

ATK High Performance GM 408 LQ4 Stroker 600 HP Stage 1 Long Block Crate Engines

ATK High Performance GM 408 LQ4 Stroker 600 hp Stage 1 long block crate engines offer streetable horsepower producing big mid- to upper-end power with a noticeable idle. ATK Stage 1 or base engines are designed for those that may have their own component parts already, and who also are interested in completing out the build themselves. Typically ATK GM 408 LQ4 Stroker 600 hp base engines consist of: * 6.0L iron LQ4 Gen III block * 4340 forged crankshaft * Forged H-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * Performance aluminum cylinder heads * OE rocker arms with trunnion upgrade * Timing set

Not Yet Reviewed

$8,997.99

BluePrint Builder Series LS376/530HP Standard Edition EFI Crate Engine and TKX Transmission Combos

BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a polished pulley kit and TKX manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 5-speed TKX Transmission Package: * McLeod Super Street Pro twin-disc clutch * Hydraulic throwout bearing * Bellhousing * Non-weighted billet flywheel * Starter * Gear ratios are 2.87:1 (first), 1.89:1 (second), 1.28:1 (third), 1.00:1 (fourth), and 0.68:1 (fifth) * Torque converter with 2,200–plus rpm stall Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plug wires * Champion 3015 spark plugs (0.040 in. gap) * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys. Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.

Not Yet Reviewed

$22,449.00

BluePrint Builder Series LS376/510HP Standard Edition EFI Crate Engine and TKX Transmission Combos

BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 510 horsepower, this standard edition builder series includes a polished pulley kit and T56 manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this engine assembly produces 440 lbs.-ft. of torque. When you need or want a new powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and TKX trans combos. Product description and specifications: Block: * High strength cast iron (LSX Style) block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0662 in. Bore * 6-bolt main Rotating Assembly: * Nodular iron crankshaft * 3.622 in. stroke * 6.098 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internally balanced front and rear Cylinder Heads: * BluePrint LS3 aluminum cylinder heads * 69cc chamber * 2.165 in. intake/1.590 in. exhaust valves * 259cc intake/102cc exhaust runners Cam Specs: * Hydraulic Roller Cam * 0.612 Intake/0.585 Exhaust Lift * 225 Intake/238 Exhaust duration * @.050-113 Degree Lobe Separation Ignition Timing: * Ignition Timing and Spark Advance are Controlled by BluePrint Engine Calibrated ECU * Transmission Controller Required if pairing to an automatic (ECU Does Not Offer Transmission Control) Other parts: * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS Swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and Fuel Rail Kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Notes: This engine requires a non-weighted flex plate such as (BPP12654640) / flywheel (BPPLS1611). Recommended fuel: 91 Octane. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The BluePrint Engines LS controller package contains a fully tested, calibrated, locked ECU, optimized for this specific engine. This package has undergone extensive testing for performance, reliability and the safety of you and your engine.

Not Yet Reviewed

$21,899.00

BluePrint Builder Series LS427/585HP Standard Edition EFI Crate Engine and T56 Transmission Combos

The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a polished (or black) pulley kit and T56 manual transmission. The BluePrint aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged steel crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 trans combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged steel crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.

Not Yet Reviewed

$26,499.00

Chevrolet Performance 7.0L 427 C.I.D. LS7 Long Block Crate Engines

Chevrolet Performance 7.0L 427 c.i.d. LS7 long block crate engines feature a unique big-bore cylinder block that is anchored with a forged crankshaft, lightweight titanium connecting rods, and hypereutectic pistons with coated skirts. Bolted on top of that is a pair of CNC-ported cylinder heads with 2.200 in. titanium intake valves and 1.610 in. sodium-filled exhaust valves. The Chevrolet Performance 7.0L 427 c.i.d. LS7 long block crate engines also include: * Dry sump Corvette oil pan * Front timing cover * Harmonic balancer

Not Yet Reviewed

$18,162.99

Chevrolet Performance Crate Engines

Looking for more power for your ride? Want to drop your quarter mile times substantially? Does OEM reliability and parts interchangeability interest you? Well my friend, you've come to the right place. Why bother rebuilding your existing engine with old, used, and worn-out parts when you can step up to brand-new with these affordable crate engines from Chevrolet Performance. You read it right, these engines feature all-new components built and manufactured by the pros at GM.

3.0 out of 5 stars ( 2 )

$7,285.07

Chevrolet Performance LSX376 Crate Engines

You're track-ready with extreme performance GM LSX376 crate engines. At home on the street and on the strip, these value-driven Chevrolet Performance crate engines offer lower-compression forged aluminum pistons, a tough bottom end, and high-flow heads. LSX376 engines make a perfect foundation for supercharging, turbocharging, and nitrous--all you need to do is supply the boost! Does your muscle deserve the LSX touch? Yes! Get the strength and power to build a winner with these features: * Race-bred LSX Bowtie block * High-flow LS3 cylinder heads * Blower-friendly 9.0:1 forged pistons * 14 in. automatic transmission flexplate * Unique LSX376 valve covers

Not Yet Reviewed

$13,568.04

Ford Performance Parts 5.0L Coyote Gen 4 Aluminator SC Crate Engines

Built for high performance applications, the Ford Performance 5.0L Coyote Gen 4 Aluminator SC crate engines are a powerhouse—ideal for custom race builds and 2024 GT Mustangs. While the Aluminator block, cylinder heads, oil pan, and intake manifold are factory pieces, Ford Performance replaces the hypereutectic pistons and sintered-steel rods with Mahle forged slugs, ARP 2000 rod bolts, and Manley forged H-beam rods, keeping the factory 12.0:1 compression ratio in naturally aspirated form and 9.5:1 on its boost-ready Aluminator crate. These flagship crates are quite popular with Ford diehards in the custom car and street rod world—because who really wants to put a Chevy LS in a deuce coupe? Crate engine features and specs: * Fits 2024+ Mustang GT * 5.0L (302 cubic inches) * 9.5:1 compression ratio (nominal) * Mahle hard anodized forged pistons with Grafal low friction coating * Manley H-beam connecting rods with ARP 2000 bolts * Forged steel crankshaft * Uses production 2024 Mustang GT aluminum block * 2024+ Production oil pan * Tuned composite Mustang GT intake manifold with production dual drive-by-wire 80mm throttle bodies with variable runner control * Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction. * Mustang GT production camshafts * Includes Ford Performance colder, heat range zero spark plugs (M-12405-M50A) * Includes Ford Performance oil filter (M-6731-FL820) * Includes billet steel gerotor oil pump gears (M-6600-M50A) * Vehicle harness and PCM not included * Does not include alternator (for alternator kit: refer to part numbers M-8600-M50BALT or M-8600-M50ALTA) * Engine mount bosses and bell housing mount pattern common to 4.6L modular engines * Does not include exhaust manifolds

Not Yet Reviewed

$15,262.99

Chevrolet Performance CPP LT1 6.2L Long Block Crate Engines

Chevrolet Performance CPP LT1 6.2L long block crate engines were introduced on the seventh-generation Corvette Stingray, and opened the next chapter in the long, historic legacy of small block engines. Architecturally similar to the LS family of engines, these LT1 engines feature a unique block casting, cylinder head design, oiling system and more. They're offered with a wet-sump or dry-sump oiling system. Chevrolet Performance CPP LT1 6.2L long block crate engine features and specs: * Engine type: Direct injection spark ignition Gen V small block V8 * Displacement: 376 c.i.d. * Bore x stroke: 4.065 x 3.622 (103.25 x 92mm) * Block: Cast aluminum with 6-bolt nodular iron main bearing caps * Crankshaft: Forged steel * Connecting rods: Forged powdered metal * Pistons: Hypereutectic aluminum * Camshaft type: Billet steel roller * Valve lift: .561 intake/.531 exhaust * Camshaft duration (@ 0.050 in.): 242 degrees intake/244 degrees exhaust * Cylinder heads: Aluminum, rectangular port * Valve size: 2.130 intake/1.590 exhaust * Compression ratio: 11.5:1 * Rocker arms: Investment-cast roller trunnion * Rocker arm ratio: 1.81:1 * Recommended fuel: Premium pump * Maximum recommended rpm: 6600 * Reluctor wheel: 58X * Balanced: Internal

Not Yet Reviewed

$10,641.52

ATK High Performance Chevy LQ4 6.0L 460 HP Long Block Crate Engines

ATK High Performance Chevy LQ4 6.0L 460 hp long block crate engines lay down impressive power that can be run with factory fuel injection or retrofitted with a carburetor. They're hand-built, balanced, and blueprinted using top-quality parts. Don't waste time trying to salvage a high-mileage short block when you can get a fresh mill that's ready for your choice of components to make it your own. ATK Chevy LQ4 6.0L 460 hp long block crate engines include: * Handpicked and seasoned 6-bolt main block * Aligned and honed main bores * OE steel crankshaft * 3.622 in. stroke * OE connecting rods * Hypereutectic dish top pistons * Aluminum cylinder heads * Hydraulic roller camshaft * Timing chain and gear set * 1.7:1 ratio rocker arms * 24-tooth reluctor

4.4 out of 5 stars ( 10 )

$5,049.99

—

$7,898.99

ATK High Performance GM LM7 5.3L with AFR Heads 500 HP Crate Engines with EFI

ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LM7 5.3L 500 hp long block crate engine is fitted with AFR heads and FiTech EFI. Engine specifications: * Horsepower: 500 * Torque: 440 * Block: OE LM7/5.3L iron * Bore/stroke: up to 3.903 in. x 3.622 in. * Displacement (cu.in): up to 347c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- AFR CNC ported aluminum -- 59cc/200cc -- 2.000 in. intake/1.570 in. exhaust * Rocker arms: OE 1.7 ratio * Oil pump: Melling M295 * EFI System: -- FiTech Ultra port injection LS1 750 hp with transmission control -- Wiring harness and ECM/TCM included * Fuel injectors: FiTech 55 lb. * Spark plugs: Autolite #104 * Spark plug wires: 8mm * Balancer: Stock internally balanced

Not Yet Reviewed

$8,899.99

29 Results Found For "ls"