JEEP Crate Engines

Showing In Stock Items. Show All 7 Items.

Individual Parts

Part Groups

Results 1 - 5 of 5

BluePrint Engines Chrysler 408 C.I.D. 465 HP Dressed Long Block Crate Engines

BluePrint Engines Chrysler 408 C.I.D. 465 hp dressed long block crate engines are fully Dyno tested, passed vigorous inspections, and ready to power up your project. These Mopar compatible crate engines are ready to replace your tired Charger, Dart, Roadrunner, or Barracuda powerplant. There's no replacement for displacement, and replacing a little 273, 318, or 360 with a Blueprint 408 stroker crate engine will have your back tires up in smoke in no time! They are offered with a polished or black finished serpentine 8-rib front pulley kit. Features, specs, and contents: * Horsepower and torque: 465 hp/494 lb.-ft. * Handpicked seasoned Magnum block * Cylinders honed to within .0002 straightness and roundness * 2-bolt main * 4.000 in. bored .040 in. over * Cast steel crankshaft * 4.000 in. stroke * Forged Magnum 6.123 in. connecting rods with 150,000 psi bolts * Forged pistons * Aluminum Magnum pattern cylinder heads--58cc chamber * Aluminum roller rockers * 2.02 in. intake/1.60 in. exhaust valves * 176cc intake/75cc exhaust runners * Roller cam * .580 intake/.577 exhaust * 235 intake/242 exhaust duration at .050 * 110 degree lobe separation * Valve covers, oil pan, timing cover, water pump, plugs, wires, distributor, water neck, thermostat, fuel pump and fuel line, harmonic balancer, air cleaner * Power steering pump: Type II with -6AN pressure, -10AN return, 1,400 psi * Air conditioning compressor: 7B10 Peanut-style * 30 month/50,000 mile warranty

Not Yet Reviewed

$11,599.00

—

$11,799.00

BluePrint Engines Pro Series Mopar 426 C.I.D. 872 HP EFI Deluxe Dressed Long Block Crate Engines

BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. These engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2

Not Yet Reviewed

$26,799.00

—

$26,899.00

BluePrint Engines Pro Series Mopar 426 C.I.D. 610 HP EFI Deluxe Dressed Long Block Crate Engines

BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. The engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW OEM Hellcat engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Holley Terminator engine harness Fuel injection Throttle body Harmonic balancer Fabricated intake Manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Fuel Injected -- Spark Plug: NGK 97408/ LZTR6AP11EG -- Spark Plug Gap: .043 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Fabricated Aluminum Gen III HEMI -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2

Not Yet Reviewed

$18,799.00

—

$18,899.00

BluePrint Motorsports Pro Series Mopar 426 C.I.D. 610 HP EFI Base Long Block Crate Engines

BluePrint Engines Pro Series Mopar 426 c.i.d. EFI base long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III HEMI Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- PS426CTF ALSO INCLUDES: Fuel injection Throttle body Harmonic balancer Fabricated intake manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Compression ratio: 10.48:1 Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel delivery type: Fuel injected -- Spark plug: NGK 97408/ LZTR6AP11EG -- Spark plug gap: .043 in. -- Harmonic balancer: Non-weighted -- Flexplate / Flywheel: Non-weighted -- Stall converter: 2500+ -- Intake manifold: Fabricated aluminum Gen III HEMI -- Fuel recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2

Not Yet Reviewed

$16,899.00

BluePrint Engines Pro Series Mopar 426 C.I.D. 872 HP Base Long Block Crate Engines

BluePrint Engines Pro Series Mopar 426 c.i.d. Base dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Holley Terminator ECU controller kit and wiring harness --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2

Not Yet Reviewed

$24,299.00

Page 1 of 1