Cylinder Heads, Valve Seats, Head Bolts, Top End Kits & More

Ford Performance Parts 289/302/351W X2 Street Cruiser Aluminum Assembled Cylinder Heads

Ford Performance Parts 289/302/351W X2 Street Cruiser aluminum assembled cylinder heads provide an easy way to bolt-on significant horsepower to your Street Cruiser package! Manufactured using all-new Ford tooling, and constructed using 356-T6 aluminum, each cylinder head is cast, precision machined, and assembled with premium components. The X2 heads also feature high-temperature exhaust valve seats, bronze guides, common rocker bosses for strength, and increased section thickness in critical areas for porting. Sold individually, two of these X2 Street Cruiser cylinder heads are required for you to complete your engine's horsepower upgrade. Additional features include: * Intake flows approximately 230 cfm at .600 in. lift (at 28 in. of H20) * Exhaust flows approximately 160 cfm at .600 in. lift (at 28 in. of H20) * Machined for 1.94 in. intake and 1.54 in. exhaust valve diameters * Use either GT-40 or aftermarket performance intake manifolds * Must check your intake manifold for port match; not all intakes are compatible due to the tall high-flow ports * Machined for AGSP-32C gasket seat spark plugs * Each head weighs approximately 25 lbs. less than each production cast iron head * Each head is leak-tested prior to assembly * Compatible with many aftermarket intake manifolds, headers, and valve train components * Includes Ford Performance intake valves, exhaust valves, and PAC 1219X Ovate Beehive valve springs * Features 10 degree locks, steel valve spring retainers, and stock valve seals * Features wider valve cover gasket sealing rail to prevent leaks * Compatible with all Ford Performance roller camshafts and aftermarket hydraulic roller camshafts up to .600 in. lift * Compatible with bolt-down rockers 1.6-1.7 ratio; always check rocker arm clearance to valve springs with production rocker arms * Depending on lifter preload, Ford Performance rocker shim kits * Use Fel-Pro exhaust gasket (part number 1415) * Designed to be used on Ford Performance BOSS blocks; M-6010-BOSS302, M-6010-B302BB, M-6010-BOSS35195, M-6010-BOSS35192 and M-6010-BOSS351BB * Use Ford Performance M-6065-BOSS headbolt set or Ford Performance M-6014-BOSS head stud kit * Use Ford Performance head gasket M-6051-CP331 or M-6051-S331—or, for "Big Bore" application, use M-6051-R351 * Must use Ford Performance M-6065-D289 headbolt kit to install heads on 289/302 production blocks * Does not fit 1986 5.0L with flat-top pistons unless pistons are notched for valve relief

4.33 out of 5 stars ( 6 )

Edelbrock Ford Flathead Cylinder Heads

Edelbrock Ford flathead cylinder heads feature your choice of the original Edelbrock script logo or the block-style logo. Designed for both Fords and Mercurys, these heads are rugged, ribbed internally and externally, with a large water capacity, and excellent breathing characteristics. Available with 74 cc or 65 cc chamber volumes, the 65cc heads support an 8.0:1 compression ratio on blocks with a 3/16 in. base relief (stock bore and stroke); compression ratio increase is approximately 3/10 of a percent with each 1/8 in. of stroke increase. The high lift/large chamber versions feature a new "raised roof" combustion chamber design and are CNC-machined for high lift cams. Perfect for reducing compression in supercharger applications or for low octane fuel, they offer increased valve clearance and improved flow capacity. Match these heads with Edelbrock's popular Ford flathead intake manifolds. Edelbrock Ford flathead cylinder heads are cast at the Edelbrock foundry in the USA of T-6 tempered A356 aluminum. They're available for a wide range of vehicles from the 1930s, '40s, and '50s.

4.86 out of 5 stars ( 7 )

Ford Performance Parts Z-Head Aluminum Cylinder Heads

Ford Performance Parts Z-Series aluminum cylinder heads provide increased intake and exhaust airflow and are available for Ford small block Windsor engines. They were designed using solid modeling technology from prime A356 T-6 aluminum and feature high-flow ports, steel alloy intake and exhaust valve seats, and manganese-bronze valve guides. Ford Z-Series heads accept both tapered seat and gasket-style 14mm spark plugs and are available as-cast or CNC-ported, both bare and assembled. Select heads are also offered with advanced "Velocity Vane" intake port design that delivers outstanding street/strip power. Developed with advanced computer-aided engineering simulation tools, their unique intake port design improves power throughout the rpm range. Velocity Vane cylinder heads are a direct bolt-on and retain OEM exhaust, intake, rocker arm, and accessory mounting locations. Features include (some vary depending on version): * A variety of combustion chamber volumes * Cast with high-flow ports * 20 degree inline valves * Steel alloy intake and exhaust valve seats * 7/16 in. screw-in studs (not included on bare heads) * Requires 1.5:1 ratio roller rocker arms with .150 in. offset intake pushrod cup (not included) * Assembled heads include laser-cut guide plates for 5/16 in. pushrods and 7/16 in. rocker studs * Premium stainless steel intake and exhaust valves (with assembled heads) Notes: * As-cast bare heads require competition valve job and bowl blending * Custom headers may be required for heads with raised exhaust port exits * Check intake manifold for port match; not all intakes are compatible due to the tall high-flow ports (does not fit M-9424-Z51/-Z51P) * Check piston-to-valve clearance, including radial valve clearance, before installing

5.0 out of 5 stars ( 1 )

Trick Flow® GenX® 255 Cylinder Heads for GM LS3

Trick Flow engineers used the best features of OEM GM LS3 and LS7 cylinder heads, combined with their own race-winning engineering and technology, to create the GenX® 255—the ultimate ultimate square port LS cylinder head for 4.000" and larger bore engines. The heads feature fully CNC Competition Ported runners with a premium high resolution surface finish for maximum airflow and performance potential. Stock LS3 ports accommodate LS3-style intake manifolds and LS9/LSA blower assemblies. The valve angles have been changed from 15° to 12° to increase piston-to-valve clearance and allow the use of larger camshafts. The coolant holes through the head deck were redesigned to work with all LS head gasket and engine block combinations. GenX 255 heads are available with standard or 6-bolt per cylinder mounting patterns. Trick Flow GenX 255 cylinder heads are emissions-legal under CARB E.O. #D-747 for 2007-present GM vehicles with 6.2L engines. They are available fully assembled or as bare castings. Sold individually.

4.0 out of 5 stars ( 7 )

Trick Flow® GenX® 280 Cylinder Heads for GM LS3

Not Yet Reviewed

Edelbrock Performer RPM Chrysler Magnum Cylinder Heads

These Performer RPM Chrysler Magnum heads give substantial performance improvements for street/strip and off-road performance use. They offer an easy bolt-on engine upgrade with substantial out-of-the-box performance gains. Stock Magnum intake and exhaust flange and port locations make these heads an ideal choice for use with stock equipment as well as the new RPM Air-Gap manifold. These heads feature a slight increase in compression over the factory heads, offer more flow than stock, and accept adjustable aftermarket rocker arms. These heads are available in bare or assembled versions; hardened pushrods are required.

4.6 out of 5 stars ( 10 )

Summit Racing™ Top End Engine Kits for Small Chevy

Summit Racing™ top end engine kits feature a pair of fully assembled Summit Street & Strip® aluminum cylinder heads matched up with a Summit Street & Strip® aluminum intake manifold, and a Summit Racing™ hydraulic cam and lifter kit. You also get a Summit Racing™ timing chain set and cam locking plate, a complete set of Trick Flow® gaskets, a Trick Flow® pushrod checker, and hardware from Summit Racing™ and GM Performance.

4.0 out of 5 stars ( 5 )

Trick Flow® PowerPort® 190 Cylinder Heads for Small Block Mopar

Trick Flow® PowerPort® 190 cylinder heads for small block Mopar engines are made from A356-T61 aluminum because it's much lighter but every bit as strong as cast iron. The intake runners have been enhanced to increase airflow, and both intake and exhaust runners feature Trick Flow's® special CNC Street Ported treatment that combines premium-quality CNC machining with a standard resolution finish that's perfect for making more power. That's not all! Newly designed rocker arm shaft mounting bosses are stronger than the OE design, and larger diameter pushrod holes have been incorporated to accommodate 3/8 in. pushrods for use with flat tappet and hydraulic roller camshafts. Bronze alloy valve guides, ductile iron valve seats, and multi-angle valve seats further increase performance and durability. Assembled cylinder heads include premium 11/32 in. stainless steel valves, Trick Flow by PAC Racing® valve springs, steel valve stem locks—and have chromoly and titanium retainer options. The heads fit all non-emissions 318, 340, and 360 engines found in many Chrysler vehicles from 1967-2003. You read that right: these heads fit both LA and Magnum-series engines, giving builders a truly "best of both worlds" scenario. That means Magnum builders can use readily available LA engine parts such as intake manifolds and valve covers. PowerPort® 190 cylinder heads are available fully assembled or as bare castings; sold separately. Order the model recommended for your year/make and engine application.

4.93 out of 5 stars ( 15 )

Trick Flow® GenX® 280 HD Cylinder Heads for GM LS3

Trick Flow® GenX® 280 HD cylinder heads offer an unbeatable combination of performance and durability, making them the perfect upgrade for your high-performance GM LS3 engine build. Assembled with Manley Severe Duty stainless steel valves, these heavy-duty versions of the standard GenX® 280 heads can withstand the added heat, stress, and abuse dealt by big power adders. That makes them the ideal choice for engines using superchargers, turbochargers, or nitrous. GenX 280 HD cylinder heads have fully CNC-profiled combustion chambers and CNC Competition Ported square port runners with a premium high resolution surface finish that guarantees dimensional accuracy and balanced flow from port-to-port for maximum power potential. The valve angles have been modified from the stock 15° to 12° to increase piston-to-valve clearance and allow the use of larger camshafts. The coolant holes through the head decks were designed to ensure compatibility with all LS head gasket and engine block combinations. The 6-bolt-per-cylinder mounting pattern for GMPP LSX and other aftermarket blocks increases clamping force to prevent head gasket failure, cylinder distortion, and other issues that plague the factory 4-bolt design. Trick Flow® GenX® 280 HD heads have LS3 port locations to work with all LS3-style intake manifolds and LS9/LSA blower assemblies. They must be used on engines with 4.000" or larger bores. Cylinder heads are available fully assembled or as bare castings. Sold individually.

Not Yet Reviewed

Trick Flow® GenX® 255 HD Cylinder Heads for GM LS3

Trick Flow® GenX® 255 HD cylinder heads offer an unbeatable combination of performance and durability, making them the perfect upgrade for your high-performance GM LS3 engine build. Assembled with Manley Severe Duty stainless steel valves, these heavy-duty versions of the standard GenX® 255 heads can withstand the added heat, stress, and abuse dealt by big power adders. That makes them the ideal choice for engines using superchargers, turbochargers, or nitrous. GenX 255 HD cylinder heads have fully CNC-profiled combustion chambers and CNC Competition Ported square port runners with a premium high resolution surface finish that guarantees dimensional accuracy and balanced flow from port-to-port for maximum power potential. The valve angles have been modified from the stock 15° to 12° to increase piston-to-valve clearance and allow the use of larger camshafts. The coolant holes through the head decks were designed to ensure compatibility with all LS head gasket and engine block combinations. The 6-bolt-per-cylinder mounting pattern for GMPP LSX and other aftermarket blocks increases clamping force to prevent head gasket failure, cylinder distortion, and other issues that plague the factory 4-bolt design. Trick Flow® GenX® 255 HD heads have LS3 port locations to work with all LS3-style intake manifolds and LS9/LSA blower assemblies. They must be used on engines with 4.000" or larger bores. Cylinder heads are available fully assembled or as bare castings. Sold individually.

Not Yet Reviewed