Availability
Showing In Stock Items. Show All 77 Items.
FLOTEK's 200cc small block as-cast ported chamber cylinder heads feature design by Jones Engineering, with 23-degree runners making impressive horsepower. Their power is ideal for street-strip usage and will post exceptional flow numbers right out of the box. The heads are available assembled or bare. Order the model with options recommended for your engine application. FLOTEK 200cc small block Chevy cylinder heads deliver the performance you're looking for! Notes, features and benefits: * This item is not sold as a pair; this is a single cylinder head * Versatile 200cc intake ports * 64cc combustion chamber * Phosphorous bronze valve guides * High-nickel valve seats * Ends already milled and drilled for accessories * Offered in solid or hydraulic cam design
( 18 )
$349.00
—
$629.00
Trick Flow® Super 23® 175 cylinder heads deliver performance that far exceeds the power capabilities of factory heads on 283-350 c.i.d. small block Chevy engines. It starts with the small cross section Fast as Cast® runners. They promote excellent port velocity for increased low end torque and have a profile that provides excellent flow for making high RPM horsepower on small bore engines. Modern CNC-profiled chambers promote combustion efficiency to maximize power with less ignition timing, reducing the potential for detonation. The result is more power and torque, better drivability, and greater throttle response from your street performance engine. The features don't end there. Trick Flow® Super 23® 175 cylinder heads have improved A356-T61 castings with 3/4" thick decks for added strength and durability. They also have a competition multi-angle valve job, angled spark plugs, and raised valve cover rails for improved rocker clearance and less potential for oil leaks. Heads are available assembled with premium components including stainless steel valves, bronze guides, 7° machined locks, chromoly retainers, and your choice of PAC Racing valve springs for flat tappet or hydraulic roller cams. Trick Flow® Super 23® 175 heads accept most original accessories. They are emissions-legal under CARB E.O. #D-747-1 for 1995 and earlier GM vehicles with Chevy 262–350 engines. Cylinder heads are available fully assembled or as bare castings. Sold individually.
( 5 )
$899.99
Engineered for maximum performance, the new E-Tec Series aluminum cylinder heads fit all small Chevys with Vortec-style intake manifolds. They incorporate Edelbrock's new high-quench 64cc combustion chamber design, which promotes a more uniform atomization of the air/fuel mixture for increased power. Available with 170cc or 200cc intake runners, these cylinder heads are assembled with one-piece stainless steel valves, 1.46 in. valve springs, retainers, and locks. The E-Tec models accept either centerbolt or standard valve covers, and work with most exhaust manifolds and headers. Match your vehicle specs to the correct Edelbrock head for precise fitment.
( 13 )
$936.50
—
$1,124.50
Stay ahead of the competition with high-flowing AFR 235cc SBC Eliminator Competition Racing heads. Intake ports, exhaust ports, and cylinder heads are 100 percent CNC-ported with finer machine levels and improved port-shaped details for optimum flow characteristics. AFR Eliminator Competition heads will satisfy your big displacement small block Chevy engine's need for more air—and to achieve additional cooling in the center of the head, spread port styles are offered. Eliminator Competition heads come complete and ready-to-run with AFR power-proven components—or choose "bare" (no parts) heads to create your own personal power package! Go with AFR cylinder heads—high performance components built for racers, by racers.
( 4 )
$3,820.95
AFR 180cc SBC Eliminator street heads are available in your choice of straight or L98 angle plug versions. These cylinder heads feature a 75cc or 65cc combustion chamber with a 64cc exhaust port and a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight, 8mm, and have a 2.020 in. intake and 1.600 in. exhaust with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. These heads' exceptional flow characteristics, 23 degree valve angle, and standard valve spacing make them the perfect street heads for 327 to 350 c.i.d. engines in the idle to 5,500 rpm operating range (higher rpm ranges are possible, depending on the combination of parts). Eliminator cylinder heads carry CARB E.O. #D-250-2 when used on 1969-94 applications with the heat riser. They're also available for your 1987 and later engines with centerbolt valve covers and two center intake bolts at 72 degree angles; Vortec-style cylinder heads are available, too. Their dual valve cover bolt pattern is standard and their exhaust port is raised .100 over GM L98 cylinder heads.
( 9 )
$2,106.30
—
$2,328.90
Chevrolet Performance L92 cylinder heads are production-style aluminum heads that provide great airflow and exceptional performance. Features include: * Manufactured from 319-T5 aluminum alloy * Aluminum performance head * Fits any LS family engine with 4.000 in. bore or larger * Solid stem intake and exhaust valves * .510 in. Max Lift valve springs * As-cast L92-style intake ports * D-shaped exhaust ports * As-cast combustion chambers * Angled spark plugs (14mm; 5/8 in. hex; 3/4 in. reach; taper-seat plugs) * 15 degree valve angle * Bolt-down-type rocker arms * Center-bolt valve cover hold-downs
Not Yet Reviewed
$999.99
Originally introduced in 1987, the latest versions of these Sportsman II heads from World Products continue to be the industry's most popular cast iron cylinder heads. Features include high-flow 200cc RightCast intake runners, Fast-Burn combustion chambers, and your choice of angled or straight spark plug locations. The ports are extra-thick with plenty of room for porting, and the heads are indexed off the chambers to ensure perfect alignment with the cylinders. Other features include universal end pads that'll accept all early and late model accessories, leak-free machined valve cover rails, and the ability to accept both perimeter and center bolt style valve covers. They are available in bare or complete assemblies with stainless steel valves, valve springs, retainers, locks, umbrella-style valve seals, screw-in studs, and pushrod guideplates.
( 4 )
$731.49
—
$994.84
AFR 195cc SBC Eliminator LT 23 degree cylinder heads feature100 percent CNC-ported intakes, exhausts, and chambers, as well as A356 aluminum castings and high-quality components throughout. They are emissions-legal (CARB E.O. #D-250-2 for engines up to 1994). These LT1/LT4 heads are designed for the Gen II reversed-cooled SBC engines from 1992-97, and are machined to accept both center bolt and perimeter bolt valve covers. Their excellent build and flow characteristics are recommended for displacements up to 400 cu. in. with an operating range up to 6500 rpm (6,500 – 6,800 rpm for the Competition heads). AFR 195cc SBC Eliminator LT heads typically include: * 8mm bead lock intake and exhaust valves * Hydraulic dual valve spring * 7 degree chromoly retainers * 7 degree bead lock valve keepers * ARP rocker studs * Adjustable 5/16 in. guide plates * Viton valve seals * Hardened valve spring * Ductile iron intake and exhaust valve seats * 8mm bronze valve guides
( 1 )
$2,499.00
PROMAXX Performance goes one up with their Vortec 185cc iron cylinder heads. Popular with street/strip enthusiasts and Circle Track racers, PROMAXX designed these heads to work well on 350-383 applications. They're available bare or assembled; both feature screw-in studs and large diameter spring pockets. In addition, they both accept centerbolt and perimeter bolt valve covers—and are drilled for Vortec and carbureted intake applications. Greater performance at the right price!
( 14 )
$822.00
—
$1,022.00
Inspired by Dart's championship winning Pro Stock designs, Dart Pro 1 aluminum cylinder heads cover a wide range of applications from street cars and trucks to all-out racing. Heads designed for street performance and mild bracket racing offer excellent mid-range torque and power, and are excellent for heavier vehicles. Competition heads are ideal for maximum effort naturally aspirated, big boost forced induction, or nitrous applications. Dart Marine Pro 1 cylinder heads feature an exclusive chromate surface finish to inhibit corrosion and extend the life of the head. They are also fitted with Inconel exhaust valves to withstand the extended running time and temperatures typical of marine usage. Dart's as-cast ports flow more than many ported designs at a much more affordable price. But they also offer fully CNC-machined heads with every intake port, exhaust runner, valve bowl, and combustion chamber shaped by their 5-axis, computer controlled machining centers to produce compound curves and complex shapes that no human could duplicate with a hand grinder. Available bare or fully assembled, long-wearing bronze valve guides, screw-in studs, multi-angle intake seats with hardened, radiused exhaust seats are standard on most heads. Assemblies typically include stainless steel valves, premium springs, locks, retainers, guide plates, and seals. Many Pro 1 heads include race-proven features such as improved spark plug location, extra-long intake valves, raised exhaust ports, and fast burn chambers. They are offered an extensive variety of valve angles, intake port volumes and shapes, exhaust port locations, valve sizes, and chamber volumes.
( 10 )
$1,558.34
Great cylinder head airflow has been a key enabler of the LS-Series' exceptional performance. Chevrolet Performance delivers those power-building attributes to you with a range of production-style aluminum heads. From the LS6 heads for smaller-displacement engines, to LS7 style heads for 427 in. and-larger combinations, these bare cast aluminum heads benefit from extensive research and development—ensuring maximum airflow without compromises. In fact, many professional builders use these heads as straight bolt-ons with no further machining. The engine cylinder heads are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These replacements are the true OE parts installed during the production of or validated by GM for select vehicles. LS7 CNC-ported cylinder head assembly notes: * 356-T6 aluminum head * Fully CNC'd ports and chambers * LS7 rectangle port design * Minimum 4.100 in. bore * 270cc CNC'd intake ports, 85cc CNC'd exhaust ports * 70cc CNC'd combustion chambers * Capable of over 600 hp Aluminum LS family head technical notes: * Manufactured from 319-T5 aluminum alloy * High-efficiency combustion chambers * Symmetrical intake and exhaust ports * Angled spark plugs (14mm; 5/8 in. hex; 3/4 in. reach; taper-seat plugs) * 15 degree valve angle (except C5R and LS7) * Bolt-down-type rocker arms (except LSX-DR, LSX-CT) * Centerbolt valve cover hold-downs * Fits Gen III and Gen IV small blocks only NOTE: Chevrolet Performance heads will not fit 4.8L and 5.3L engines, due to their smaller bore sizes.
Not Yet Reviewed
$3,234.74
These CNC-machined aluminum Fast Burn cylinder heads from Chevrolet Performance are designed for 1958-2000 283-400 c.i.d. Chevy V8s. They quickly and completely burn the air/fuel mixture, ensuring higher cylinder pressure and more power. No additional porting is required--Chevrolet Performance Parts' cast-ported technology gives these heads maximum performance right out of the box. They're drilled and tapped for Vortec and raised port manifolds, they accept flange-mount or centerbolt-style valve covers, and will support in excess of 500 HP.
Not Yet Reviewed
$1,514.83
FLOTEK 180cc small block Chevy cylinder heads are economically priced, out-of-the-box-ready bolt-ons. They include state-of-the-art aluminum casting, 180cc intake ports that are specifically designed for outstanding versatility, and 64cc combustion chambers. Among their standard features: aluminum alloy construction, phosphorous bronze valve guides, high-nickel valve seats—plus ends milled and drilled for accessories, as well as straight or angle spark plugs. Besides the assembled options, these cylinder heads are also offered bare. When choosing the right heads, it's quality, performance, and price that matter most. FLOTEK 180cc Chevy small block heads deliver on all three! NOTE: This item is not sold as a pair; this is a single cylinder head.
( 24 )
$339.00
—
$479.00
Summit Racing™ precision cast cylinder heads are made from tough A-356 aluminum alloy and feature Permanent Mold "As-Cast" technology. Port accuracy is unrivaled--meaning CNC porting is not required to provide superior flow. The result is CNC-ported performance at a fraction of the price! We start with precision CNC-finished faces and bolt holes for accuracy and fitment. American craftsmen expertly size and install the manganese bronze valve guides and interlocking ductile iron seats before finishing with a competition-grade valve job. From there, the decks are given a final pass for superior finish. They are finish-assembled in the USA with top-quality components like PAC Racing springs, fasteners, one-piece 21 4N stainless valves, machined locks, Viton® seals and chromoly steel retainers. The final result is the performance you want and Summit Racing™ quality you TRUST!
( 12 )
$699.99
—
$709.99
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 161 )
$780.50
—
$1,558.50
On Sale
Think you have to scour the local bone yards to find a decent set of GM's old double hump or fuelie cylinder head castings? Not true. In fact, we've brought back classic Chevy performance in a big way with these ready-to-run heads for small block Chevy. Our versions of the popular GM cylinder heads offer great performance for less than it would cost to rebuild an old set of double hump castings.
( 125 )
$649.99
$599.99
AFR 220cc SBF Renegade 20 Degree Competition Heads are the largest, best-flowing choice to top your small block Ford. These power-producing cylinder heads are born of A356 aluminum castings and feature intake ports, exhaust ports, and combustion chambers that are all 100 percent CNC-ported. Renegades are outfitted with lightweight 8mm, 2.100 in. intake valves and 1.570 in. exhaust valves to move massive amounts of air. They come with either combustion chamber volumes of 58 or 72cc accompanied by 70cc exhaust ports, which are raised .375 in. higher than stock. Plus, AFR's trademark 3/4 in. thick cylinder head deck makes them ideal for heavy nitrous or blower applications. Choose the flow characteristics that can give your Ford the power to win—AFR 220cc SBF Renegade 20 degree competition heads.
( 12 )
$3,143.70
Edelbrock Performer RPM 454-O high-compression cylinder heads offer smaller ports for bigger performance. Designed for big block Chevy's with oval ports, these cylinder heads feature unique oval intake ports that flow similar to rectangular ports but the smaller size provides excellent seat-of-the-pants performance plus crisp throttle response! And, the 100cc chamber volume is ideal for your high-compression application. Both the intake and exhaust ports of these Performer RPM heads have been profiled for improved air flow and they have smaller-than-stock valve stems for less weight and excellent flow. More flow, more power, and more performance for your big block application comes with a set of Edelbrock Performer RPM 454-O high-compression cylinder heads.
( 13 )
$1,214.50
—
$1,251.50
AFR 210cc LS1/LS2/LS6 Enforcer cylinder heads are available in standard and small bore applications. They feature Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. The budget-friendly heads are perfect for your OEM engine operating below 6,300 rpm. Fully assembled Enforcer models include the identical components found in AFR's higher end CNC-ported cylinder heads—such as PAC Racing springs, Viton® valve seals, machined bead valve locks (not stamped), hardened spring seats, and one-piece 8mm 21 4N stainless steel valves. The heads are available without any parts for the DIY. Sold as a single piece, two heads are required per engine.
( 2 )
$562.80
—
$780.15
Recommended for aggressive street/strip builds with displacements up to 427 c.i. operating at or below 7200 rpm. Capable of flowing 328 cfm at 0.650 in. lift with a 4.000 in. bore size. AFR street legal 230cc LS1 Mongoose strip cylinder heads are specifically designed for Gen III Chevy Corvettes, Camaros, and trucks. LSX cylinder heads offer unmatched flow performance and feature 2.080 in. intake and 1.600 in. exhaust valves with their ductile iron interlocking valve seats. Mongoose strip heads are available with 62cc, 65cc, and 72cc combustion chambers. Structural features like AFR's trademark 3/4 in. thick head deck, a must for blown and nitrous applications, reinforced rocker stud bosses, and thick wall runners provide unparalleled durability. An exclusive new modern combination chamber design with a double quench pad area helps the LSX generate huge low and mid-lift airflow numbers.
( 7 )
$3,332.70
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,079.50
—
$1,251.50
On Sale
Deliver power-building airflow to your engine with Summit Racing™ Vortec cast iron cylinder heads. These heads outflow the early model small Chevy heads with wide-open intake runners, efficient combustion chambers, and a high-performance valve job. They are made from a strong cast iron alloy that makes them less brittle than comparable Vortec heads on the market. For performance and great value, select the Summit Racing™ Vortec cast iron cylinder heads preferred for your build.
( 74 )
$649.99
$549.99
—
$599.99
Chevrolet Performance LSA cylinder heads offer high-strength cast aluminum casting for your supercharged application with premium steel intake and Inconel exhaust valves. Offering high strength, high flow, and high performance, LSA assembled cylinder heads provide an advantage to doing a build your way. Chevrolet Performance delivers those power-building attributes to you with a range of production-style aluminum heads.
( 2 )
$912.99
Trick Flow® GenX® 260 square port cylinder heads for GM LS7 are the best choice for your LS-based performance build for several reasons. The A356-T6 aluminum castings feature more material for increased rigidity and strength. Factory LS7 port locations, valve angles, and valve locations have been maintained to work with existing intakes and pistons. One-piece modular, 2024-T4 billet aluminum rocker arm mounts enhance valvetrain stability and are removable for shaft rocker setups. High flow, high velocity CNC Competition Ported runners with the premium high resolution surface finish provide all-out air flow and performance throughout the entire powerband. Plus there's clearance for 3/8" pushrods and through-deck coolant holes that fit all GM LS gasket and block combinations, Trick-Alloy™ powdered metal valve guides, and solid stem valves. Fully assembled heads also include Trick Flow® by PAC Racing Pacaloy valve springs, steel or titanium spring retainers, die forged steel valve locks, and stainless steel valves. Trick Flow® GenX® 260 cylinder heads are emissions-legal under CARB E.O. D-747 for 2006 to present GM vehicles with 7.0L engines. They are available fully assembled or as bare castings and sold individually.
( 2 )
$1,149.99
—
$1,599.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
