Availability
Trick Flow® PowerPort® 190 cylinder heads for small block Mopar engines are made from A356-T61 aluminum because it's much lighter but every bit as strong as cast iron. The intake runners have been enhanced to increase airflow, and both intake and exhaust runners feature Trick Flow's® special CNC Street Ported treatment that combines premium-quality CNC machining with a standard resolution finish that's perfect for making more power. That's not all! Newly designed rocker arm shaft mounting bosses are stronger than the OE design, and larger diameter pushrod holes have been incorporated to accommodate 3/8 in. pushrods for use with flat tappet and hydraulic roller camshafts. Bronze alloy valve guides, ductile iron valve seats, and multi-angle valve seats further increase performance and durability. Assembled cylinder heads include premium 11/32 in. stainless steel valves, Trick Flow by PAC Racing® valve springs, steel valve stem locks—and have chromoly and titanium retainer options. The heads fit all non-emissions 318, 340, and 360 engines found in many Chrysler vehicles from 1967-2003. You read that right: these heads fit both LA and Magnum-series engines, giving builders a truly "best of both worlds" scenario. That means Magnum builders can use readily available LA engine parts such as intake manifolds and valve covers. PowerPort® 190 cylinder heads are available fully assembled or as bare castings; sold separately. Order the model recommended for your year/make and engine application.
( 15 )
$949.99
—
$1,424.99
Introducing the PROMAXX Performance Maxx Series Big Block Chrysler cylinder heads. For superior casting strength and durability, they are cast from A356 aluminum and heat-treated to T-6 specifications. These cylinder heads feature 2.140 inch stainless steel intake, and 1.810 inch stainless exhaust valves. Heads include chromoly retainers, hardened locks, 5-angle valve job, diamond-honed guides, and high performance valve springs capable of supporting .600 inches of lift. All PROMAXX Performance Maxx Series big block Mopar cylinder heads have the bowls blended by hand, and are assembled by professional builders. By flowing over 295 cfm and using all stock-type components, they provide Mopar enthusiasts an affordable choice in the market without sacrificing quality. Wake up your Mopar and install a set of PROMAXX Performance Maxx Series big block Mopar cylinder heads.
( 6 )
$1,439.00
Pro-Filer small block Chevy All American cylinder heads have a 23 degree valve angle, providing bolt-on compatibility for stock accessories. They're designed for all-around racing and are offered with 185cc, 195cc, 210cc, 235cc intake ports; 64cc, 68cc, 70cc, or 72cc chambers; and straight or angled spark plug locations. You can order the heads assembled or unassembled for engine builders. End pads are drilled and tapped for accessories, and bronze guides are included to reduce stem wear. Nearly 200 models are available; order the heads with options recommended for your application. Whether you're running on the street, strip, or track, equip your ride with Pro-Filer small block Chevy All American cylinder heads. Additional features: * Revised spark plug location to improve flame travel * Uses gasketed 3/4 in. reach plugs like NGK R5671-7 Series
( 4 )
$775.00
—
$1,399.99
Building on the features that make the GenX® 255 for GM LS3 great—like 12° valve angles and relocated valves for reduced valve shrouding and improved piston-to-valve clearance—Trick Flow's GenX® 280 HIP cylinder heads withstand the abuse of high horsepower, power-adder performance demanded by today's racers and engine builders. The GenX® 280 heads list of features is long, and it starts with the HIP'd (Hot Isostatic Pressed) castings. This process significantly increases the casting's density for improved tensile and fatigue strength. It continues with industry leading airflow through CNC Competition Ported 280cc intake ports and Trick-Alloy™ powdered metal valve guides for added longevity. Manley Severe Duty intake valves and Extreme Duty Inconel exhaust valves are designed to withstand the abuse of extreme temperatures and stresses of big power adder applications. Trick Flow® by PAC Racing dual valve springs, titanium retainers, .750-inch thick deck, and 6-bolt-per-cylinder mounting pattern round out the features. Trick Flow® GenX® 280 HIP cylinder heads for GM LS3 work with all LS3 intake manifolds and LS9/LSA blower assemblies and fit all LS head gasket and engine block combinations. These cylinder heads are available fully assembled or as bare castings. Sold individually. Key features: * 280cc intake ports and 67cc combustion chambers * HIP'd casting * Accepts 3/8 in. pushrods * Powdered metal valve guides * 2.165 in. NK-844 severe duty stainless steel intake valves * 1.600 in. XH-432 extreme duty Inconel exhaust valves * .750 in. thick deck * 6-bolt configuration * Assembled heads include a Trick Flow® LS3 rocker stand
Not Yet Reviewed
$1,349.99
—
$1,949.99
On Sale
Edelbrock Victor DR-23 Degree Pro Port raw cylinder heads are ready for finishing by the professional cylinder head porter or engine builder. They have as-cast ports with enough metal thickness to allow for CNC porting to different sizes. The heads are available for a variety of Chevrolet engine applications.
Not Yet Reviewed
$1,821.50
$1,457.20
On Sale
Edelbrock Pro-Port raw cylinder heads are un-ported versions of the Edelbrock race-winning Victor Series CNC heads for the professional cylinder head porter and engine builder. Pro-Port raw cylinder heads are cast with extra-thick walls to allow for custom CNC porting. They are the only heads designed specifically to accommodate almost any CNC port shape, size or location. Some Edelbrock Pro-Port raw heads feature their special Hot Isostatic Pressing or HIP Process.
Not Yet Reviewed
$2,220.50
—
$2,340.50
$1,776.40
—
$1,872.40
Great cylinder head airflow has been a key enabler of the LS-Series' exceptional performance. Chevrolet Performance delivers those power-building attributes to you with a range of production-style aluminum heads. From the LS6 heads for smaller-displacement engines, to LS7 style heads for 427 in. and-larger combinations, these bare cast aluminum heads benefit from extensive research and development—ensuring maximum airflow without compromises. In fact, many professional builders use these heads as straight bolt-ons with no further machining. The engine cylinder heads are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These replacements are the true OE parts installed during the production of or validated by GM for select vehicles. LS7 CNC-ported cylinder head assembly notes: * 356-T6 aluminum head * Fully CNC'd ports and chambers * LS7 rectangle port design * Minimum 4.100 in. bore * 270cc CNC'd intake ports, 85cc CNC'd exhaust ports * 70cc CNC'd combustion chambers * Capable of over 600 hp Aluminum LS family head technical notes: * Manufactured from 319-T5 aluminum alloy * High-efficiency combustion chambers * Symmetrical intake and exhaust ports * Angled spark plugs (14mm; 5/8 in. hex; 3/4 in. reach; taper-seat plugs) * 15 degree valve angle (except C5R and LS7) * Bolt-down-type rocker arms (except LSX-DR, LSX-CT) * Centerbolt valve cover hold-downs * Fits Gen III and Gen IV small blocks only NOTE: Chevrolet Performance heads will not fit 4.8L and 5.3L engines, due to their smaller bore sizes.
Not Yet Reviewed
$3,234.74
Something great just got better! Twisted Wedge 170 cylinder heads now feature updated A356-T61 machined castings previously reserved for Trick Flow's 11R series heads, including a .625" thick deck for more power-making strength. The castings' billet-like appearance seriously increases the cool factor too. Twisted Wedge 170 cylinder heads have Trick Flow's pioneering Twisted Wedge combustion chamber to reduce valve shrouding and enhance high-lift flow. The design features altered 15° intake/17° exhaust valve angles, which tightens the combustion chamber for increased compression and improved piston-to-valve clearance. That allows the use of higher lift cams with stock pistons—even with the 2.020" intake valves! CNC-profiled combustion chambers with relocated spark plugs optimize combustion efficiency, and a choice of 58cc or 61cc combustion chamber volumes allow builders to dial-in the perfect compression ratio. High-efficiency, Fast As Cast® runners and a competition level, multi-angle valve job deliver near-CNC-ported power and airflow at cast head prices. Assembled Twisted Wedge 170 cylinder heads come with top-quality stainless steel valves, bronze guides, PAC Racing valve springs, thread-in 3/8" or 7/16" rocker studs, and chromoly retainers to ensure great durability and longevity. Some Twisted Wedge 170 cylinder heads are emissions-legal under CARB E.O. #D-747-1 for 1996 and earlier Ford 289, 302, and 351W engines. Cylinder heads are available fully assembled or as bare castings. Sold individually.
( 27 )
$649.99
—
$874.99
Something great just got better! Twisted Wedge 170 cylinder heads now feature updated A356-T61 machined castings previously reserved for Trick Flow's 11R series heads, including a .625" thick deck for more power-making strength. The castings' billet-like appearance seriously increases the cool factor too. Twisted Wedge 170 cylinder heads have Trick Flow's pioneering Twisted Wedge combustion chamber to reduce valve shrouding and enhance high-lift flow. The design features altered 15° intake/17° exhaust valve angles, which tightens the combustion chamber for increased compression and improved piston-to-valve clearance. That allows the use of higher lift cams with stock pistons—even with the 2.020" intake valves! CNC-profiled combustion chambers with relocated spark plugs optimize combustion efficiency, and a choice of 58cc or 61cc combustion chamber volumes allow builders to dial-in the perfect compression ratio. High-efficiency, Fast As Cast® runners and a competition level, multi-angle valve job deliver near-CNC-ported power and airflow at cast head prices. Assembled Twisted Wedge 170 cylinder heads come with top-quality stainless steel valves, bronze guides, PAC Racing valve springs, thread-in 3/8" or 7/16" rocker studs, and chromoly retainers to ensure great durability and longevity. Some Twisted Wedge 170 cylinder heads are emissions-legal under CARB E.O. #D-747-1 for 1996 and earlier Ford 289, 302, and 351W engines. Cylinder heads are available fully assembled or as bare castings. Sold individually.
( 14 )
$649.99
—
$874.99
It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all-out competition powerplants. Simply stated, there's not a better stud setup on the market today. ARP uses a premium-grade 8740 alloy that is rated far superior to "aircraft" quality. Then, each stud is placed vertically in special racks and precisely heat-treated to 200,000 psi. ARP studs are thread-rolled after heat-treat, which gives them about 1,000 percent (that's ten times) better fatigue strength than those studs that are threaded prior to heat-treat (a very common industry practice).
Not Yet Reviewed
$573.41
These Big Chief cylinder heads from Dart put Pro Stock technology within the reach of every racer and engine builder. They have what it takes to win today: spread intake ports, shallow valve angles, efficient combustion chambers, raised exhaust runners, and a valvetrain that's reliable at high rpm. That's some serious performance, right out of the box!
Not Yet Reviewed
$2,615.39
—
$6,171.16
Looking for raw horsepower in a cylinder head? Brodix PB 2000 cylinder heads are simply the best of the best. They flow power in two versions--out-of-the-box and completely CNC-ported. Both begin as strong A-356 virgin aluminum castings and feature solid phosphorous guides, gorilla valve seats, and extra thick decks. Designed by legendary engine builder Sonny Leonard, Brodix PB 2000 box-ready models flow an unbelievable 535 cfm, while the fully CNC-ported models flow 587 cfm and are nitrous friendly. They are available bare or packaged with valves, valve springs, retainers, locks, seals, and rocker studs. When it's power and performance you want, Brodix PB 2000 cylinder heads are what you need to top your big block!
Not Yet Reviewed
$1,989.99
—
$4,270.99
With a true canted valve design (7.3 degree intake and 6.9 degree exhaust valve angles), these Edelbrock Glidden Victor SC-1 Pro-Port Raw cylinder heads have maximum power potential. Their extended intake flange and raised runners work with Yates-style manifolds. These heads are ideal for unlimited drag racing.
Not Yet Reviewed
$2,317.50
Sportsman racers need reliable parts that will get them through the entire race season. Edelbrock Victor DR-17 Pro-Port raw cylinder heads are designed to give consistent performance in big block Chevys. These new-wave heads are based on the 24 degree Victor Gen II raw design, but feature 17 degree intake valve angles for improved efficiency and combustion, and a slight adjustment in location for better flow. Edelbrock uses a pressurized chamber and aerospace process called Hot Isostatic Pressing to compress castings at nearly 900 degrees F and 30,000 psi to give them nearly three times the average fatigue life, wicked strength, extreme density, and near billet aluminum consistency. DR17 Pro Port heads are cast with enough wall thickness for CNC-machining to various port dimensions, and will allow most CNC port shapes, sizes, and locations. Be ready to rumble next season with Edelbrock Victor DR-17 Pro-Port raw cylinder heads. Additional features include: * Raised intake port + 0.400 in. * Taller valve cover rails * Revised water jackets for maximum-effort port designs * Generally, seats and manganese-bronze valve guides are included, but not installed * Exhaust port location raised + 0.600 in. * Shaft rocker system required * Tall deck applications require the use of spacers ** Professional cylinder head preparation is required for use.
Not Yet Reviewed
$1,821.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
