Availability
Airflow Research developed these 185cc SBF Enforcer cylinder heads for maximum small block Ford performance. They're manufactured from tough but lightweight A356 aluminum and feature 185cc intake runners and 64cc combustion chambers. Enforcer heads feature a 0.325 in. deck, stock valve locations, and are designed for blocks with a minimum bore of 4.000 in. The heads are available bare or fully assembled with stud mount rocker mounting.
( 21 )
$767.55
AFR's 335cc BBC Enforcer cylinder heads feature their Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. These budget-friendly heads are perfect for your 509 to 540 cu.in. operating below 6,500 rpm. They come fully assembled with the identical components found in AFR's higher end CNC-ported cylinder heads—such as ARP rockers studs, PAC Racing springs, Viton® valve seals, AFR adjustable guide plates, machined bead valve locks (not stamped), hardened spring seats, and AFR's one-piece 8mm 21 4N stainless steel valves. Order the cylinder heads recommended for your year/make and engine application.
( 5 )
$1,023.75
AFR 210cc LS1/LS2/LS6 Enforcer cylinder heads are available in standard and small bore applications. They feature Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. The budget-friendly heads are perfect for your OEM engine operating below 6,300 rpm. Fully assembled Enforcer models include the identical components found in AFR's higher end CNC-ported cylinder heads—such as PAC Racing springs, Viton® valve seals, machined bead valve locks (not stamped), hardened spring seats, and one-piece 8mm 21 4N stainless steel valves. The heads are available without any parts for the DIY. Sold as a single piece, two heads are required per engine.
( 1 )
$780.15
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 159 )
$870.50
—
$1,035.50
Summit Racing™ precision cast cylinder heads are made from tough A-356 aluminum alloy and feature Permanent Mold "As-Cast" technology. Port accuracy is unrivaled--meaning CNC porting is not required to provide superior flow. The result is CNC-ported performance at a fraction of the price! We start with precision CNC-finished faces and bolt holes for accuracy and fitment. American craftsmen expertly size and install the manganese bronze valve guides and interlocking ductile iron seats before finishing with a competition-grade valve job. From there, the decks are given a final pass for superior finish. They are finish-assembled in the USA with top-quality components like PAC Racing springs, fasteners, one-piece 21 4N stainless valves, machined locks, Viton® seals and chromoly steel retainers. The final result is the performance you want and Summit Racing™ quality you TRUST!
( 11 )
$764.99
—
$899.99
No longer will fans of the small block Chevy have to choose between vintage looks or modern cylinder head power—Trick Flow® DHC™ 175 cylinder heads give you both! Made from premium grade, lightweight A356-T61 aluminum, DHC™ 175 heads feature the exterior styling and straight spark plug holes that deliver the nostalgic appearance of the original factory performance 186, 291,461,462 "double hump" or "camel back" castings that customers want. To keep with the vintage design, the heads are available with 69' later or without 68' earlier accessory bolt holes cast into them. 60cc CNC-profiled combustion chambers combined with a state of the art valve job and CNC blended bowl work under the valves and small cross-section intake runners promote low-rpm torque increases and boost high-rpm horsepower. The runners are finished with Trick Flow's® superior Fast As Cast® process that precisely duplicates the runner profile and performance levels of fully CNC-ported heads without the added machining cost. Ductile iron valve seats for use with unleaded fuel, stainless steel valves, bronze alloy valve guides, multi-angle valve seat machining, and decks and walls cast extra thick for increased casting strength and to provide extra room for porting round out the features. Trick Flow® DHC™ 175 cylinder heads are available fully assembled or as bare castings. Sold individually.
( 18 )
$849.99
—
$874.99
Fit any LS engine with Chevrolet Performance LS3 cylinder heads. Manufactured from aluminum alloy, these GM stock replacement heads are assembled with intake and exhaust valves, stem seals, retainers, springs, and locks. Great cylinder head airflow has always supplied the LS Series with exceptional performance. Retain that performance and save yourself time and worry by replacing your tired cylinder heads with Chevrolet Performance LS3 cylinder heads.
( 4 )
$1,068.89
Chevrolet Performance LSA cylinder heads offer high-strength cast aluminum casting for your supercharged application with premium steel intake and Inconel exhaust valves. Offering high strength, high flow, and high performance, LSA assembled cylinder heads provide an advantage to doing a build your way. Chevrolet Performance delivers those power-building attributes to you with a range of production-style aluminum heads.
( 2 )
$901.99
Big combustion chambers plus larger runners equal massive power! Trick Flow GenX® 195 cylinder heads are designed for GM LT1 engines with superchargers or turbochargers. They retain the stock LT1's 23 degree valve angles—and feature large, standard cast 62cc combustion chambers to reduce compression. Big 195cc intake/72cc exhaust Fast As Cast® runners substantially increase horsepower and torque in boosted applications. Trick Flow® GenX 195 heads accept all stock sensors and fittings, and are available fully assembled or as bare castings. Sold individually.
( 2 )
$874.99
ARP Pro Series cylinder head studs are cold-forged to ensure molecular integrity. They're heat-treated prior to thread rolling and machining. ARP Pro Series kits are also available with 12-point nuts, and all studs come complete with hardened parallel washers for an even load distribution and accurate torque readings. With hundreds of models ready to ship, these cylinder head fasteners can be ordered for virtually any style engine.
( 777 )
$763.99
—
$1,091.99
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 40 )
$1,009.50
—
$1,053.50
Give your Ford 390-428 more get-up-and-go with Trick Flow PowerPort® 175 cylinder heads. A direct bolt-on for all 1961-76 FE engines, the heads are made from top-quality A356-T61 aluminum so they're much lighter but still as strong as OE castings. Specially optimized intake runners increase airflow velocity, and Trick Flow's extraordinary CNC Street Ported treatment guarantees proper dimensional accuracy and balance between the runners. Other performance improvements of the PowerPort175® heads include bronze alloy valve guides, ductile iron valve seats, and multi-angle valve seat machining on SerdiR equipment. Assembled cylinder heads include premium 11/32 in. stainless steel valves, Trick Flow® by PAC Racing valve springs, 7 or 10 degree steel valve stem locks, and chromoly or titanium retainer options. The heads are available fully assembled or as bare castings. Sold individually.
( 9 )
$1,099.99
These Edelbrock Victor Max Wedge big block Chrysler cylinder heads are designed for the serious race enthusiast. They are made of aluminum and feature raised intake and exhaust ports for improved flow characteristics. The raised valve cover rails eliminate any chance of leaking gaskets. Available with or without valves, the Edelbrock Victor Max Wedge big block Chrysler cylinder heads have reamed and semi-finished valve stem guides and no valve job. They require final guide sizing, valve seat finishing before installation, and special offset rocker arms for the intake side.
( 2 )
$991.95
Edelbrock Performer RPM bare NHRA Stock/Super Stock cylinder heads deliver great throttle response and power from 1,500 to 6,500 rpm, and with winning results. Offering the best in quality and performance, these bare heads are cast and heat-treated in the Edelbrock Foundry and machined in their manufacturing facility. Designed with the latest computer technology, they have highly efficient ports and state-of-the-art combustion chambers shapes for improved performance throughout the rpm range with great throttle response and top-end horsepower. Edelbrock Performer RPM bare NHRA Stock/Super Stock cylinder heads include top-quality features, like threaded inserts in rocker stud and exhaust bolt holes for superior strength and durability, and manganese-bronze valve guides with ductile iron valve seats.
( 1 )
$991.95
Trick Flow High Port® 240 cylinder heads are specifically designed for large cubic inch small block Ford engines as well as engines with high-boost super- and turbocharges, big shot nitrous oxide systems, and other mega-power combinations. They feature unique valve spacing, .750" raised exhaust runners, extra strong castings and thick decks for additional rigidity and gasket integrity, superior cooling characteristics, and most importantly, excellent airflow. Top-of-the-line CNC Competition Ported runners with a high resolution surface finish provide maximum airflow and power over the entire rpm range. The entry into the intake runner has been reshaped to help seal the area along the port roof and thicker port walls increase strength and provide more material for porting. Plus, interlocking ductile iron seats are used to handle the stresses of high heat, high horsepower applications. Other features include fully CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending) and raised valve cover rails.
( 3 )
$849.99
Trick Flow® legendary Twisted Wedge® 170 series cylinder heads are better than ever! All of the unique features that made Twisted Wedge® Series heads so dominant in high performance and racing are still here—Twisted Wedge® combustion chambers and valve layout, high-flow/high-velocity intake runners, and top-quality valvetrain components—plus CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending) and refined Fast As Cast® runners that deliver near-CNC-ported power and airflow at cast head prices. The A356-T61 aluminum castings have been redesigned on the exhaust side to improve strength and water jacket integrity. Certain Twisted Wedge® 170 heads are emissions-legal under CARB E.O. #D-747-1 for 1996 and earlier Ford 289, 302, and 351W engines. The heads are available fully assembled or as bare castings. Sold individually.
( 6 )
$874.99
Ideal for those who desire affordable heads that make maximum power, these Victor Jr. heads from Edelbrock are just what the doctor ordered. Specifically designed for the needs of competition and ultra-high performance street engines, they offer increased horsepower and rpm potential in an out-of-the-box, cost-effective, race-winning setup. Features include hardened ductile iron valve seats and phosphor-bronze guides. They accept standard hardware and most are available in bare and assembled versions.
( 14 )
$867.95
—
$1,114.95
Engineered for maximum performance, the new E-Tec Series aluminum cylinder heads fit all small Chevys with Vortec-style intake manifolds. They incorporate Edelbrock's new high-quench 64cc combustion chamber design, which promotes a more uniform atomization of the air/fuel mixture for increased power. Available with 170cc or 200cc intake runners, these cylinder heads are assembled with one-piece stainless steel valves, 1.46 in. valve springs, retainers, and locks. The E-Tec models accept either centerbolt or standard valve covers, and work with most exhaust manifolds and headers. Match your vehicle specs to the correct Edelbrock head for precise fitment.
( 13 )
$891.50
—
$1,070.50
FLOTEK's 290cc big block Chevy cylinder heads with 112cc combustion chambers are recommended for moderate street or street/strip BBCs with displacements up to 509 cu. in. operating at or below 6,500 rpm. It may be necessary to check clearance and slightly modify some domed aftermarket pistons due to the efficient heart-shaped combustion chamber on these heads (most of the newer designed dome profiles will clear). FLOTEK recommends removing material from the piston and not the cylinder head, as the combustion chamber shapes are very critical to flow—altering the cylinder head can unfavorably affect flow and power performance. FLOTEK's medium-sized 290cc oval port cylinder heads are designed for 3/8 in. pushrods with 0.120 in. wall thickness. They're available assembled or bare for a variety of engine applications. NOTE: This item is not sold as a pair; this is a single cylinder head.
( 1 )
$799.00
Trick Flow® High Port® 225 cylinder heads are specifically designed for large cubic inch small block Ford engines as well as engines with high-boost superchargers or turbos, big shot nitrous oxide systems, and other mega-power combinations. They feature unique valve spacing, .750" raised exhaust runners, extra strong castings and thick decks for additional rigidity and gasket integrity, superior cooling characteristics, and most importantly, excellent airflow. Top-of-the-line CNC Competition Ported runners with a high resolution surface finish provide maximum airflow and power over the entire rpm range. The entry into the intake runner has been reshaped to help seal the area along the port roof and thicker port walls increase strength and provide additional material for porting. Plus, interlocking ductile iron seats are used to handle the stresses of high heat, high horsepower applications. Other features include fully CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending) and raised valve cover rails. Trick Flow® High Port® 225 cylinder heads are available fully assembled or as bare castings and sold individually.
( 3 )
$849.99
Trick Flow® GenX® 260 square port cylinder heads for GM LS7 are the best choice for your LS-based performance build for several reasons. The A356-T6 aluminum castings feature more material for increased rigidity and strength. Factory LS7 port locations, valve angles, and valve locations have been maintained to work with existing intakes and pistons. One-piece modular, 2024-T4 billet aluminum rocker arm mounts enhance valvetrain stability and are removable for shaft rocker setups. High flow, high velocity CNC Competition Ported runners with the premium high resolution surface finish provide all-out air flow and performance throughout the entire powerband. Plus there's clearance for 3/8" pushrods and through-deck coolant holes that fit all GM LS gasket and block combinations, Trick-Alloy™ powdered metal valve guides, and solid stem valves. Fully assembled heads also include Trick Flow® by PAC Racing Pacaloy valve springs, steel or titanium spring retainers, die forged steel valve locks, and stainless steel valves. Trick Flow® GenX® 260 cylinder heads are emissions-legal under CARB E.O. D-747 for 2006 to present GM vehicles with 7.0L engines. They are available fully assembled or as bare castings and sold individually.
( 2 )
$1,149.99
Trick Flow® Super 23® 215 cylinder heads give a huge performance boost to race-ready small block Chevy engines. Based on the proven Super 23® head design, the heads feature large, 215cc intake runners for more airflow in the mid and upper RPM range. Fast As Cast® ports deliver near-CNC-ported flow and performance for about the same price as regular cast heads—that means more power for less. Other features include angled spark plugs, raised valve cover rails, and extra-thick decks and walls for custom porting jobs. You can get Super 23® 215 heads with two valve spring packages for different camshaft types and power levels. The standard 453 lb. valve springs are perfect for most hydraulic roller cams. For more aggressive solid roller cam profiles, choose the optional 550 lb. valve springs for proper control at high RPMs. Cylinder heads are available fully assembled or as bare castings. Sold individually.
( 3 )
$1,054.99
—
$1,079.99
Build the ultimate classic-looking hi-po Chevy small block with Trick Flow® DHC™ 200 cylinder heads. Patterned after Trick Flow's popular DHC™ 175 as-cast heads, DHC™ 200 heads get the full CNC-ported treatment to substantially ramp up power production. New 64cc CNC-profiled combustion chambers with 2.055 in. intake valves and CNC Street Ported runners promote big increases in high-RPM horsepower and torque. Bronze alloy valve guides, ductile iron valve seats, and stainless steel valves ensure excellent durability, while proprietary valve profiles and multi-angle valve seat machining maximize flow at low lift. Extra thick decks and walls increase casting strength for peace of mind in demanding conditions. Chromoly steel retainers, 7-degree machined steel valve locks, factory intake and exhaust port locations, and your choice of Trick Flow by PAC Racing valve springs are also standard. As with all Trick Flow® cylinder heads, DHC™ 200 heads are cast from A356-T61 aluminum to keep weight low. To preserve the vintage theme, exterior touches like straight spark plug holes, castings with or without accessory bolt holes, and other OE double hump head styling cues deliver the traditional look you're going for. Sold individually.
( 1 )
$949.99
World Products S/R cylinder heads make it easy to rebuild your engine affordably. They feature hardened steel exhaust seats compatible with unleaded gasoline, extra-thick decks and walls for improved reliability, tapped for screw-in rocker studs, and machined valve cover rails to eliminate leaks. The heads are available bare or assembled for a variety of applications. With the strength, reliability, and great price of these cylinder heads, there's no reason to bother with worn-out junkyard castings or new OEM castings—you can depend on World Products to help you do it right.
( 3 )
$882.79
—
$891.04
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
