Availability
Showing In Stock Items. Show All 20 Items.
Designed to provide even greater increases than World Products' own Sportsman II heads, the Motown 220 cylinder heads rate as the ultimate small Chevy cast iron heads. Features include high-tech 64cc combustion chambers, 220cc intake runners capable of excellent flow and velocity, high-flow ports, and standard 2.055 in. diameter intake valves. They're ideal for large-displacement small blocks (383 or larger), and are available in bare or complete assemblies with valves, retainers, screw-in studs, guideplates, and your choice of 1.440 in. or 1.550 in. valve springs.
( 1 )
$948.99
—
$1,048.63
Trick Flow® Super 23® 175 cylinder heads deliver performance that far exceeds the power capabilities of factory heads on 283-350 c.i.d. small block Chevy engines. It starts with the small cross section Fast as Cast® runners. They promote excellent port velocity for increased low end torque and have a profile that provides excellent flow for making high RPM horsepower on small bore engines. Modern CNC-profiled chambers promote combustion efficiency to maximize power with less ignition timing, reducing the potential for detonation. The result is more power and torque, better drivability, and greater throttle response from your street performance engine. The features don't end there. Trick Flow® Super 23® 175 cylinder heads have improved A356-T61 castings with 3/4" thick decks for added strength and durability. They also have a competition multi-angle valve job, angled spark plugs, and raised valve cover rails for improved rocker clearance and less potential for oil leaks. Heads are available assembled with premium components including stainless steel valves, bronze guides, 7° machined locks, chromoly retainers, and your choice of PAC Racing valve springs for flat tappet or hydraulic roller cams. Trick Flow® Super 23® 175 heads accept most original accessories. They are emissions-legal under CARB E.O. #D-747-1 for 1995 and earlier GM vehicles with Chevy 262–350 engines. Cylinder heads are available fully assembled or as bare castings. Sold individually.
( 1 )
$899.99
Trick Flow® Super 23® 215 cylinder heads give a huge performance boost to race-ready small block Chevy engines. Based on the proven Super 23® head design, the heads feature large, 215cc intake runners for more airflow in the mid and upper RPM range. Fast As Cast® ports deliver near-CNC-ported flow and performance for about the same price as regular cast heads—that means more power for less. Other features include angled spark plugs, raised valve cover rails, and extra-thick decks and walls for custom porting jobs. You can get Super 23® 215 heads with two valve spring packages for different camshaft types and power levels. The standard 453 lb. valve springs are perfect for most hydraulic roller cams. For more aggressive solid roller cam profiles, choose the optional 550 lb. valve springs for proper control at high RPMs. Cylinder heads are available fully assembled or as bare castings. Sold individually.
( 1 )
$1,054.99
Welcome to a new class of high performance cylinder heads--BluePrint Muscle Series! These aluminum heads are assembled with the perfect match of components for outstanding, trouble-free performance. Plus, they give you more power behind the wheel and in your wallet! These all-cast heads are designed for hydraulic flat tappet and hydraulic roller cam engines with hefty intake runners, stainless steel valves, Viton® seals, and dual springs. BluePrint Engines stand in front of the class, offering both performance and cost-conscious enthusiasts a powerful alternative--Muscle Series cylinder heads.
( 86 )
$949.00
Edelbrock Ford flathead cylinder heads feature your choice of the original Edelbrock script logo or the block-style logo. Designed for both Fords and Mercurys, these heads are rugged, ribbed internally and externally, with a large water capacity, and excellent breathing characteristics. Available with 74 cc or 65 cc chamber volumes, the 65cc heads support an 8.0:1 compression ratio on blocks with a 3/16 in. base relief (stock bore and stroke); compression ratio increase is approximately 3/10 of a percent with each 1/8 in. of stroke increase. The high lift/large chamber versions feature a new "raised roof" combustion chamber design and are CNC-machined for high lift cams. Perfect for reducing compression in supercharger applications or for low octane fuel, they offer increased valve clearance and improved flow capacity. Match these heads with Edelbrock's popular Ford flathead intake manifolds. Edelbrock Ford flathead cylinder heads are cast at the Edelbrock foundry in the USA of T-6 tempered A356 aluminum. They're available for a wide range of vehicles from the 1930s, '40s, and '50s.
( 7 )
$987.50
—
$1,046.95
Trick Flow engineers used the best features of OEM GM LS3 and LS7 cylinder heads, combined with their own race-winning engineering and technology, to create the GenX® 255—the ultimate ultimate square port LS cylinder head for 4.000" and larger bore engines. The heads feature fully CNC Competition Ported runners with a premium high resolution surface finish for maximum airflow and performance potential. Stock LS3 ports accommodate LS3-style intake manifolds and LS9/LSA blower assemblies. The valve angles have been changed from 15° to 12° to increase piston-to-valve clearance and allow the use of larger camshafts. The coolant holes through the head deck were redesigned to work with all LS head gasket and engine block combinations. GenX 255 heads are available with standard or 6-bolt per cylinder mounting patterns. Trick Flow GenX 255 cylinder heads are emissions-legal under CARB E.O. #D-747 for 2007-present GM vehicles with 6.2L engines. They are available fully assembled or as bare castings. Sold individually.
( 7 )
$1,149.99
Airflow Research developed these 185cc SBF Enforcer cylinder heads for maximum small block Ford performance. They're manufactured from tough but lightweight A356 aluminum and feature 185cc intake runners and 64cc combustion chambers. Enforcer heads feature a 0.325 in. deck, stock valve locations, and are designed for blocks with a minimum bore of 4.000 in. The heads are available bare or fully assembled with stud mount rocker mounting.
( 21 )
$767.55
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 164 )
$983.50
—
$1,119.50
Chevrolet Performance cast iron Vortec cylinder heads will fit 1958 and later small block Chevy engines, and offer a 20 to 40 hp increase over earlier cast iron small block heads. Features include fast burn combustion chambers, and a high-velocity port design. They require the use of a Vortec-style intake and self-aligning rocker arms, and come complete with valves, springs, and retainers.
( 6 )
$795.65
Originally introduced in 1987, the latest versions of these Sportsman II heads from World Products continue to be the industry's most popular cast iron cylinder heads. Features include high-flow 200cc RightCast intake runners, Fast-Burn combustion chambers, and your choice of angled or straight spark plug locations. The ports are extra-thick with plenty of room for porting, and the heads are indexed off the chambers to ensure perfect alignment with the cylinders. Other features include universal end pads that'll accept all early and late model accessories, leak-free machined valve cover rails, and the ability to accept both perimeter and center bolt style valve covers. They are available in bare or complete assemblies with stainless steel valves, valve springs, retainers, locks, umbrella-style valve seals, screw-in studs, and pushrod guideplates.
( 4 )
$948.99
—
$994.84
Ideal for those who desire affordable heads that make maximum power, these Victor Jr. heads from Edelbrock are just what the doctor ordered. Specifically designed for the needs of competition and ultra-high performance street engines, they offer increased horsepower and rpm potential in an out-of-the-box, cost-effective, race-winning setup. Features include hardened ductile iron valve seats and phosphor-bronze guides. They accept standard hardware and most are available in bare and assembled versions.
( 14 )
$1,106.50
—
$1,124.50
Engineered for maximum performance, the new E-Tec Series aluminum cylinder heads fit all small Chevys with Vortec-style intake manifolds. They incorporate Edelbrock's new high-quench 64cc combustion chamber design, which promotes a more uniform atomization of the air/fuel mixture for increased power. Available with 170cc or 200cc intake runners, these cylinder heads are assembled with one-piece stainless steel valves, 1.46 in. valve springs, retainers, and locks. The E-Tec models accept either centerbolt or standard valve covers, and work with most exhaust manifolds and headers. Match your vehicle specs to the correct Edelbrock head for precise fitment.
( 13 )
$936.50
—
$975.50
Bolt on a set of affordable World Products S/R Torquer heads and add some serious muscle to your small block Chevy—up to 30 horses over stock. The heads are available bare or assembled for a variety of applications. These cast iron heads feature: * Power-building 170cc intake runners * Dual-pattern raised, leak-free valve cover rails * Tapped for screw-in rocker arm studs * 2.02 in. intake/1.60 in. exhaust valves * Umbrella valve seals * 1.250 in. valve springs * 7 degree retainers and locks
( 2 )
$891.04
World Products S/R cylinder heads make it easy to rebuild your engine affordably. They feature hardened steel exhaust seats compatible with unleaded gasoline, extra-thick decks and walls for improved reliability, tapped for screw-in rocker studs, and machined valve cover rails to eliminate leaks. The heads are available bare or assembled for a variety of applications. With the strength, reliability, and great price of these cylinder heads, there's no reason to bother with worn-out junkyard castings or new OEM castings—you can depend on World Products to help you do it right.
( 3 )
$882.79
—
$891.04
Ford Performance Parts Gen 3 Coyote cylinder heads provide increased intake and exhaust airflow when compared to earlier generation Coyote engines. Heads come fully machined and ready to install.
( 2 )
$884.99
PROMAXX Performance Freedom Series small block Chevy cylinder heads offer exceptional quality at an unbelievable price. Manufactured from high-quality aluminum, they are assembled with the finest components. Freedom Series cylinder heads feature one-piece stainless steel intake and exhaust valves, enhanced intake runners, and performance valve springs with steel retainers. They're available in straight or angle plug designs. Horsepower costs money. With Freedom Series small block Chevy cylinder heads, PROMAXX Performance offers you the opportunity to bolt on the power that you've been looking for, at the price you want.
( 65 )
$950.00
—
$1,039.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
