Availability
Showing In Stock Items. Show All 100 Items.
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 164 )
$1,001.50
—
$1,595.50
Edelbrock Performer RPM 454-O high-compression cylinder heads offer smaller ports for bigger performance. Designed for big block Chevy's with oval ports, these cylinder heads feature unique oval intake ports that flow similar to rectangular ports but the smaller size provides excellent seat-of-the-pants performance plus crisp throttle response! And, the 100cc chamber volume is ideal for your high-compression application. Both the intake and exhaust ports of these Performer RPM heads have been profiled for improved air flow and they have smaller-than-stock valve stems for less weight and excellent flow. More flow, more power, and more performance for your big block application comes with a set of Edelbrock Performer RPM 454-O high-compression cylinder heads.
( 13 )
$1,214.50
—
$1,251.50
These Performer RPM Chrysler Magnum heads give substantial performance improvements for street/strip and off-road performance use. They offer an easy bolt-on engine upgrade with substantial out-of-the-box performance gains. Stock Magnum intake and exhaust flange and port locations make these heads an ideal choice for use with stock equipment as well as the new RPM Air-Gap manifold. These heads feature a slight increase in compression over the factory heads, offer more flow than stock, and accept adjustable aftermarket rocker arms. These heads are available in bare or assembled versions; hardened pushrods are required.
( 10 )
$1,214.50
—
$1,251.50
Edelbrock Performer RPM 348/409 Chevy cylinder heads have been specifically designed for the 1961-65 Chevy W Series 348/409 big block engines. These Performer RPM heads feature aluminum construction with original port locations and valve angles for bolt-on convenience. The CNC port-matched 220cc intake runners and 90cc exhaust ports optimize flow and power throughout the entire rpm range. With their new, improved port design, the Edelbrock Performer RPM 348/409 Chevy cylinder heads are sure to add some easy bolt-on horsepower to your engine.
( 1 )
$1,628.50
—
$1,665.50
On Sale
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,059.50
—
$1,625.50
These CNC-machined aluminum Fast Burn cylinder heads from Chevrolet Performance are designed for 1958-2000 283-400 c.i.d. Chevy V8s. They quickly and completely burn the air/fuel mixture, ensuring higher cylinder pressure and more power. No additional porting is required--Chevrolet Performance Parts' cast-ported technology gives these heads maximum performance right out of the box. They're drilled and tapped for Vortec and raised port manifolds, they accept flange-mount or centerbolt-style valve covers, and will support in excess of 500 HP.
Not Yet Reviewed
$1,514.83
Maximum quality, maximum performance, and minimum pricing—PROMAXX Maxx Series SBF cylinder heads take affordable power to the next level. With ultra-smooth Grade A 356-T6 aluminum castings that are precision machined, these small block Ford heads deliver awesome air speeds with super-efficient chamber designs to produce the power and torque you've sought for your setup. Maxx cylinder heads feature 5-angle competition valve jobs, diamond-honed bronze guides, and hand bowl blending. They also offer these heads bare. Get superb out-of-the-box performance, without emptying your wallet, when you order PROMAXX Maxx Series small block Ford cylinder heads.
( 14 )
$1,232.00
PROMAXX Performance Freedom Series small block Chevy cylinder heads offer exceptional quality at an unbelievable price. Manufactured from high-quality aluminum, they are assembled with the finest components. Freedom Series cylinder heads feature one-piece stainless steel intake and exhaust valves, enhanced intake runners, and performance valve springs with steel retainers. They're available in straight or angle plug designs. Horsepower costs money. With Freedom Series small block Chevy cylinder heads, PROMAXX Performance offers you the opportunity to bolt on the power that you've been looking for, at the price you want.
( 65 )
$1,039.00
—
$1,197.00
Maximum quality, maximum performance, and minimum pricing--PROMAXX Maxx Series SBC cylinder heads take affordable power to the next level. With ultra-smooth Grade A 356-T6 aluminum castings that are precision CNC-machined, these small block Chevy heads deliver awesome air speeds with super-efficient chamber designs to produce the power and torque you need for the street or strip. Maxx cylinder heads feature 5-angle competition valve jobs, diamond-honed bronze guides, and hand bowl blending. Get out-of-the-box performance that kicks up the power without emptying your wallet--PROMAXX Maxx Series SBC cylinder heads.
( 23 )
$1,164.00
—
$1,292.00
Ford Performance Parts 289/302/351W X2 Street Cruiser aluminum assembled cylinder heads provide an easy way to bolt-on significant horsepower to your Street Cruiser package! Manufactured using all-new Ford tooling, and constructed using 356-T6 aluminum, each cylinder head is cast, precision machined, and assembled with premium components. The X2 heads also feature high-temperature exhaust valve seats, bronze guides, common rocker bosses for strength, and increased section thickness in critical areas for porting. Sold individually, two of these X2 Street Cruiser cylinder heads are required for you to complete your engine's horsepower upgrade. Additional features include: * Intake flows approximately 230 cfm at .600 in. lift (at 28 in. of H20) * Exhaust flows approximately 160 cfm at .600 in. lift (at 28 in. of H20) * Machined for 1.94 in. intake and 1.54 in. exhaust valve diameters * Use either GT-40 or aftermarket performance intake manifolds * Must check your intake manifold for port match; not all intakes are compatible due to the tall high-flow ports * Machined for AGSP-32C gasket seat spark plugs * Each head weighs approximately 25 lbs. less than each production cast iron head * Each head is leak-tested prior to assembly * Compatible with many aftermarket intake manifolds, headers, and valve train components * Includes Ford Performance intake valves, exhaust valves, and PAC 1219X Ovate Beehive valve springs * Features 10 degree locks, steel valve spring retainers, and stock valve seals * Features wider valve cover gasket sealing rail to prevent leaks * Compatible with all Ford Performance roller camshafts and aftermarket hydraulic roller camshafts up to .600 in. lift * Compatible with bolt-down rockers 1.6-1.7 ratio; always check rocker arm clearance to valve springs with production rocker arms * Depending on lifter preload, Ford Performance rocker shim kits * Use Fel-Pro exhaust gasket (part number 1415) * Designed to be used on Ford Performance BOSS blocks; M-6010-BOSS302, M-6010-B302BB, M-6010-BOSS35195, M-6010-BOSS35192 and M-6010-BOSS351BB * Use Ford Performance M-6065-BOSS headbolt set or Ford Performance M-6014-BOSS head stud kit * Use Ford Performance head gasket M-6051-CP331 or M-6051-S331—or, for "Big Bore" application, use M-6051-R351 * Must use Ford Performance M-6065-D289 headbolt kit to install heads on 289/302 production blocks * Does not fit 1986 5.0L with flat-top pistons unless pistons are notched for valve relief
( 6 )
$1,336.99
Edelbrock Performer RPM Chrysler Gen III HEMI cylinder heads are bolt-on performance upgrades for Gen III HEMI engines. They are designed to fit with the stock intake manifold, exhaust manifold, valve cover, rockers, spark plugs, and accessories, as well as Hellcat components. The cylinder heads have been machined to be used on either the driver or passenger side of the block. They are cast from A356 aluminum and are heat-treated to T6 specifications. Edelbrock Performer RPM Chrysler Gen III HEMI cylinder heads feature fully CNC-machined combustion chambers, along with CNC-profiled bowls and port entries/exits for improved airflow. They also feature more material in the deck and reinforced combustion chambers for increased cylinder pressures. The rocker bosses have been reinforced for improved stability and strength, and extra material has been added around the intake and exhaust ports to allow for porting in racing applications. Both the intake and exhaust port flanges have remained in the factory location for use with OEM components. The intake and exhaust valves have been tipped away from the bore wall to unshroud the larger valves, while maintaining factory geometry. The seat diameters have also been increased for improved heat transfer and durability over stock.
( 3 )
$1,611.50
—
$1,639.50
Ford Performance Parts teamed up with Jon Kaase to redesign their 429 Cobra Jet cylinder heads, and the results are these Super Cobra Jet heads. They feature revised valve angles and locations to reduce cylinder wall shrouding and improve flow, along with redesigned combustion chambers to accommodate the more centrally located valves. These heads use the same valves, valve springs, retainers, and 7/16 in. stud-mounted roller rockers as the current Ford Performance Parts 429 Cobra Jet heads, and the standard Cobra Jet intake and exhaust manifolds bolt right on. This new design offers a 25-50 HP increase over current Cobra Jet heads, depending upon displacement and camshaft.
( 13 )
$1,209.99
Edelbrock Performer RPM Pontiac CNC cylinder heads have the same specifications as our popular Performer RPM cylinder heads for 1962-79 455 c.i.d. Pontiac engines, but feature a CNC-machined combustion chamber. The CNC-machined chambers result in a consistent and precise chamber for improved flow performance. Performer RPM CNC cylinder heads are available in two chamber sizes. The 87cc chamber version is ideal for 9.5:1 engines and will deliver excellent street performance on low-octane fuel. Performer RPM CNC cylinder heads with 72cc chambers are best for higher compression engines. Both are patterned after the same port flange configuration as the 1969-70 Ram-Air IV Pontiac cylinder heads.
( 2 )
$1,521.50
—
$1,560.50
Fit any LS engine with Chevrolet Performance LS3 cylinder heads. Manufactured from aluminum alloy, these GM stock replacement heads are assembled with intake and exhaust valves, stem seals, retainers, springs, and locks. Great cylinder head airflow has always supplied the LS Series with exceptional performance. Retain that performance and save yourself time and worry by replacing your tired cylinder heads with Chevrolet Performance LS3 cylinder heads.
( 4 )
$1,069.76
OEM Duramax cast aluminum cylinder heads fall short over time; the different heat expansion crates between cast iron engine block and cast aluminum cylinder head cause head gasket scrubbing, and eventually blown head gaskets. Aluminum cylinder heads are also prone to warping, melting, and/or cracking in high performance applications where excessive heat is introduced. Pacific Performance Engineering LLY/LBZ/LMM cast iron cylinder heads are the ultimate upgrade to your Duramax engine and eliminate any head gasket or cracking concerns. Cast from high-quality alloyed grey iron, PPE LLY/LBZ/LMM cylinder heads offer elevated fatigue strength and heat and creep resistance, which prolongs the cylinder head's lifespan significantly. They also share the same heat expansion rate as the stock cast iron cylinder block, so no more blown head gaskets. These cylinder heads also feature cast-in fuel injector cups and solve the OEM injector cup leaking issue. Each head comes complete with brand new springs, spring retainers, spring locators, valves, valve seals, valve keepers, valve seats, valve guides, rocker arm dowels, and freeze plugs. Whether you have a damaged aluminum cylinder head or a desire for better reliability and longevity on your Duramax engine, the Pacific Performance Engineering LLY/LBZ/LMM cast iron cylinder head is undoubtedly the best choice. Component features and benefits: * Premium 21-4N, Stellite-reinforced exhaust valves, and chrome-silicon alloy intake valves * All valves are fully nitridated with increased abrasion resistance * High-strength, CNC-machined chromoly steel spring retainers and spring locators * Upgraded tapered valve springs provide faster response and eliminate valve float at high rpms * Powdered metal valve seats offer superior wear and heat resistance * Significantly reduced diesel engine clatter compared to the factory aluminum cylinder heads * Increased thermal efficiency compared to aluminum heads * 3-Year Unlimited Mileage Warranty
Not Yet Reviewed
$1,349.99
Fleece Performance introduces the Freedom Series cylinder heads for 6.6L Duramax engines, found in many Chevy and GMC trucks from 2001 and up. Each cylinder head is manufactured in-house at the state-of-the-art Freedom Racing Engine Shop and is guaranteed to meet or exceed factory specifications. All heads are meticulously inspected, pressure and leak tested, and are equipped with new valve guides, springs, and valve seals. Perfect for the daily driver or towing application, these heads utilize stock valves with a 45 degree angle on the intake and exhaust ports. Available with new or remanufactured casting.
Not Yet Reviewed
$1,099.00
OEM Duramax cast aluminum cylinder heads fall short over time; the different heat expansion crates between cast iron engine block and cast aluminum cylinder head cause head gasket scrubbing, and eventually blown head gaskets. Aluminum cylinder heads are also prone to warping, melting, and/or cracking in high performance applications where excessive heat is introduced. Pacific Performance Engineering LB7 cast iron cylinder heads are the ultimate upgrade to your Duramax engine and eliminate any head gasket or cracking concerns. Cast from high-quality alloyed grey iron, PPE LB7 cylinder heads offer elevated fatigue strength and heat and creep resistance, which prolongs the cylinder head's lifespan significantly. They also share the same heat expansion rate as the stock cast iron cylinder block, so no more blown head gaskets. These cylinder heads also feature cast-in fuel injector cups and solve the OEM injector cup leaking issue. Each head comes complete with brand new springs, spring retainers, spring locators, valves, valve seals, valve keepers, valve seats, valve guides, rocker arm dowels, and freeze plugs. Whether you have a damaged aluminum cylinder head or a desire for better reliability and longevity on your Duramax engine, the Pacific Performance Engineering LB7 cast iron cylinder head is undoubtedly the best choice. Component features and benefits: * Premium 21-4N, Stellite-reinforced exhaust valves, and chrome-silicon alloy intake valves * All valves are fully nitridated with increased abrasion resistance * High-strength, CNC-machined chromoly steel spring retainers and spring locators * Upgraded tapered valve springs provide faster response and eliminate valve float at high rpms * Powdered metal valve seats offer superior wear and heat resistance * Significantly reduced diesel engine clatter compared to the factory aluminum cylinder heads * Increased thermal efficiency compared to aluminum heads * 3-Year Unlimited Mileage Warranty
Not Yet Reviewed
$1,349.99
Edelbrock Performer RPM bare NHRA Stock/Super Stock cylinder heads deliver great throttle response and power from 1,500 to 6,500 rpm, and with winning results. Offering the best in quality and performance, these bare heads are cast and heat-treated in the Edelbrock Foundry and machined in their manufacturing facility. Designed with the latest computer technology, they have highly efficient ports and state-of-the-art combustion chambers shapes for improved performance throughout the rpm range with great throttle response and top-end horsepower. Edelbrock Performer RPM bare NHRA Stock/Super Stock cylinder heads include top-quality features, like threaded inserts in rocker stud and exhaust bolt holes for superior strength and durability, and manganese-bronze valve guides with ductile iron valve seats.
( 1 )
$1,041.50
PROMAXX Performance goes one up with their Vortec 185cc iron cylinder heads. Popular with street/strip enthusiasts and Circle Track racers, PROMAXX designed these heads to work well on 350-383 applications. They're available bare or assembled; both feature screw-in studs and large diameter spring pockets. In addition, they both accept centerbolt and perimeter bolt valve covers—and are drilled for Vortec and carbureted intake applications. Greater performance at the right price!
( 14 )
$1,022.00
Ford Performance Parts Z2 Velocity Vane cylinder heads improve power throughout the rpm range. Developed with advanced computer-aided engineering simulation tools, Ford Z2 aluminum heads feature their unique Velocity Vane intake port design that delivers outstanding street/strip power. These high performance cylinder heads are direct bolt-ons for Ford 289/302/351W engines, and they retain OEM exhaust, intake, and accessory mounting locations. Ford Z2 Velocity Vane cylinder head specs: * Cast from prime 356 T6 aluminum * Heads retain Ford OEM intake and exhaust port location and flange * Velocity Vane in port floor directs airflow around the valve stem, leading to more horsepower and torque throughout the full power range * 20 degree inline valve angle * Premium stainless steel valves: 2.05 in. intake, 1.60 in. exhaust valves * PAC 1219X conical-style valve springs with machined retainers and 10 degree machined valve locks--most hydraulic cams can be used with these springs * Valve spring closed pressure: 145 lbs. at 1.800 in. * Valve spring open pressure: 358 lbs. at 1.175 in. * Coil bind at 1.100 in., 0.650 in. max lift * Includes laser-cut guide plates for use with 5/16 in. pushrods and 7/16 in. rocker studs * Steel alloy intake and exhaust valve seats * Manganese-bronze valve guides * 63cc combustion chamber
( 2 )
$1,306.99
Chevrolet Performance Gen V LT4/LT5 cylinder heads are a great fit for a variety of cars—including select Cadillac CT5 and Chevy Camaro and Corvette models. The aluminum heads are assembled and ready for installation. Product specs: * Complete cylinder head * Intake port style: Gen V LT * Bolt count: 4-bolt * Chamber size: 65cc * Guide material: Powdered metal * Roller style: Hydraulic roller * Casting style: Standard casting
Not Yet Reviewed
$1,105.99
Introducing the PROMAXX Performance Maxx Series Big Block Chrysler cylinder heads. For superior casting strength and durability, they are cast from A356 aluminum and heat-treated to T-6 specifications. These cylinder heads feature 2.140 inch stainless steel intake, and 1.810 inch stainless exhaust valves. Heads include chromoly retainers, hardened locks, 5-angle valve job, diamond-honed guides, and high performance valve springs capable of supporting .600 inches of lift. All PROMAXX Performance Maxx Series big block Mopar cylinder heads have the bowls blended by hand, and are assembled by professional builders. By flowing over 295 cfm and using all stock-type components, they provide Mopar enthusiasts an affordable choice in the market without sacrificing quality. Wake up your Mopar and install a set of PROMAXX Performance Maxx Series big block Mopar cylinder heads.
( 6 )
$1,439.00
Chevrolet Performance cast iron Vortec cylinder heads will fit 1958 and later small block Chevy engines, and offer a 20 to 40 hp increase over earlier cast iron small block heads. Features include fast burn combustion chambers, and a high-velocity port design. They require the use of a Vortec-style intake and self-aligning rocker arms, and come complete with valves, springs, and retainers.
( 6 )
$1,258.33
PROMAXX Performance Project X small block Chevrolet cylinder heads have the right stuff to perfectly fit your budget build with abundant power. The economical "As-Cast" aluminum versions feature ultra-smooth 356-T6 casting, precision machining, and an array of assembled options, as well as being available bare. For high-flowing cylinder heads at a great price, get PROMAXX Performance Project X small block Chevrolet cylinder heads.
( 1 )
$1,287.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
