Availability
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 118 )
$1,291.95
—
$1,791.95
Summit Racing™ precision cast cylinder heads are made from tough A-356 aluminum alloy and feature Permanent Mold "As-Cast" technology. Port accuracy is unrivaled--meaning CNC porting is not required to provide superior flow. The result is CNC-ported performance at a fraction of the price! We start with precision CNC-finished faces and bolt holes for accuracy and fitment. American craftsmen expertly size and install the manganese bronze valve guides and interlocking ductile iron seats before finishing with a competition-grade valve job. From there, the decks are given a final pass for superior finish. They are finish-assembled in the USA with top-quality components like PAC Racing springs, fasteners, one-piece 21 4N stainless valves, machined locks, Viton® seals and chromoly steel retainers. The final result is the performance you want and Summit Racing™ quality you TRUST!
( 11 )
$624.99
—
$709.99
AFR 210cc LS1/LS2/LS6 Enforcer cylinder heads are available in standard and small bore applications. They feature Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. The budget-friendly heads are perfect for your OEM engine operating below 6,300 rpm. Fully assembled Enforcer models include the identical components found in AFR's higher end CNC-ported cylinder heads—such as PAC Racing springs, Viton® valve seals, machined bead valve locks (not stamped), hardened spring seats, and one-piece 8mm 21 4N stainless steel valves. The heads are available without any parts for the DIY. Sold as a single piece, two heads are required per engine.
( 2 )
$562.80
—
$780.15
Brodix Cylinder Heads IK 200 cylinder heads for small block Chevys will give you big-time performance. Made from revolutionary lightweight castings, these virgin aluminum, fully assembled cylinder heads are specifically designed for optimum versatility. Features: * 200cc intake ports * 64cc or 70cc combustion chambers * Manganese bronze valve guides * Valve seats for use with unleaded gas * End-milled and drilled for accessories * 2.02 in./1.60 in. stainless steel valves * Valve springs * Valve stem seals * 5/16 in. guideplates * Rocker arm studs * Retainers * Locks
( 38 )
$605.99
—
$1,493.99
Race-ready AFR 220cc SBC Eliminator racing heads feature 100 percent CNC-ported intakes with greater detail. They also come with 100 percent CNC-ported combustion chambers and 80cc exhaust ports with a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm, 2.080 in. intakes and 1.600 in. exhausts with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. They also offer exceptional flow characteristics, a 23 degree valve angle, and standard valve spacing. These cylinder heads are perfect for 350 to 400 c.i.d. engines in bracket drag cars, sportsman oval trackers, and highly modified street-class cars operating between 3,000 and 7,500 rpm (higher rpm ranges are possible, depending on the combination of parts).
( 22 )
$2,259.60
—
$3,423.00
FLOTEK 180cc small block Chevy cylinder heads are economically priced, out-of-the-box-ready bolt-ons. They include state-of-the-art aluminum casting, 180cc intake ports that are specifically designed for outstanding versatility, and 64cc combustion chambers. Among their standard features: aluminum alloy construction, phosphorous bronze valve guides, high-nickel valve seats—plus ends milled and drilled for accessories, as well as straight or angle spark plugs. Besides the assembled options, these cylinder heads are also offered bare. When choosing the right heads, it's quality, performance, and price that matter most. FLOTEK 180cc Chevy small block heads deliver on all three! NOTE: This item is not sold as a pair; this is a single cylinder head.
( 23 )
$339.00
—
$479.00
On Sale
Deliver power-building airflow to your engine with Summit Racing™ Vortec cast iron cylinder heads. These heads outflow the early model small Chevy heads with wide-open intake runners, efficient combustion chambers, and a high-performance valve job. They are made from a strong cast iron alloy that makes them less brittle than comparable Vortec heads on the market. For performance and great value, select the Summit Racing™ Vortec cast iron cylinder heads preferred for your build.
( 74 )
$649.99
$549.99
—
$599.99
Don't sacrifice quality for a low price--get both with our Summit Racing™ 64cc aluminum cylinder heads for small Chevy. The lightweight heads are cast from A-356 aluminum alloy and have 200cc intake ports, 64cc combustion chambers, phosphorous bronze valve guides, and ductile iron valve seats for use with unleaded gas. They're also end-milled and drilled for accessories. The fully assembled heads have 2.02 in. intake and 1.60 in. stainless steel exhaust valves, valve springs, 7 degree valve locks, 3/8 in. rocker arm studs, and 5/16 in. guideplates.
( 28 )
$1,329.99
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 159 )
$1,040.50
—
$1,252.50
Brodix IK 180 cylinder heads for small block Chevys will give you big-time performance. Made from revolutionary lightweight castings, these virgin aluminum, fully assembled cylinder heads offer the following features: * 180cc intake ports and 64cc or 70cc combustion chambers * Manganese bronze valve guides * Valve seats for use with unleaded gas * End-milled and drilled for accessories * 2.02 in./1.60 in. stainless steel valves * Valve springs * Valve stem seals * 5/16 in. guideplates * Rocker arm studs * Retainers * Locks
( 30 )
$1,207.99
—
$1,493.99
Maximum quality, maximum performance, and minimum pricing--PROMAXX Maxx Series SBC cylinder heads take affordable power to the next level. With ultra-smooth Grade A 356-T6 aluminum castings that are precision CNC-machined, these small block Chevy heads deliver awesome air speeds with super-efficient chamber designs to produce the power and torque you need for the street or strip. Maxx cylinder heads feature 5-angle competition valve jobs, diamond-honed bronze guides, and hand bowl blending. Get out-of-the-box performance that kicks up the power without emptying your wallet--PROMAXX Maxx Series SBC cylinder heads.
( 22 )
$925.00
—
$1,292.00
Big combustion chambers plus larger runners equal massive power! Trick Flow GenX® 195 cylinder heads are designed for GM LT1 engines with superchargers or turbochargers. They retain the stock LT1's 23 degree valve angles—and feature large, standard cast 62cc combustion chambers to reduce compression. Big 195cc intake/72cc exhaust Fast As Cast® runners substantially increase horsepower and torque in boosted applications. Trick Flow® GenX 195 heads accept all stock sensors and fittings, and are available fully assembled or as bare castings. Sold individually.
( 1 )
$874.99
Dart SHP Special High Performance cylinder heads provide an affordable option for those who desire the weight savings of aluminum heads for a performance street engine. These units are manufactured from A356-T6 aluminum and are designed to work with most off-the-shelf components. SHP heads are available with your choice of 64cc or 72cc combustion chambers—and come in both 180cc and 200cc intake runner ports that are precision-cast to offer excellent flow and power without the need for CNC-machined porting. They feature optimized chambers for increased combustion efficiency, as well as multi-angle intake seats. The cylinder heads' radiused exhaust seats dramatically increase their performance, and the manganese bronze valve guides increase their life.
( 11 )
$599.99
No longer will fans of the small block Chevy have to choose between vintage looks or modern cylinder head power—Trick Flow® DHC™ 175 cylinder heads give you both! Made from premium grade, lightweight A356-T61 aluminum, DHC™ 175 heads feature the exterior styling and straight spark plug holes that deliver the nostalgic appearance of the original factory performance 186, 291,461,462 "double hump" or "camel back" castings that customers want. To keep with the vintage design, the heads are available with 69' later or without 68' earlier accessory bolt holes cast into them. 60cc CNC-profiled combustion chambers combined with a state of the art valve job and CNC blended bowl work under the valves and small cross-section intake runners promote low-rpm torque increases and boost high-rpm horsepower. The runners are finished with Trick Flow's® superior Fast As Cast® process that precisely duplicates the runner profile and performance levels of fully CNC-ported heads without the added machining cost. Ductile iron valve seats for use with unleaded fuel, stainless steel valves, bronze alloy valve guides, multi-angle valve seat machining, and decks and walls cast extra thick for increased casting strength and to provide extra room for porting round out the features. Trick Flow® DHC™ 175 cylinder heads are available fully assembled or as bare castings. Sold individually.
( 19 )
$649.99
—
$874.99
Welcome to a new class of high performance cylinder heads--BluePrint Muscle Series! These aluminum heads are assembled with the perfect match of components for outstanding, trouble-free performance. Plus, they give you more power behind the wheel and in your wallet! These all-cast heads are designed for hydraulic flat tappet and hydraulic roller cam engines with hefty intake runners, stainless steel valves, Viton® seals, and dual springs. BluePrint Engines stand in front of the class, offering both performance and cost-conscious enthusiasts a powerful alternative--Muscle Series cylinder heads.
( 86 )
$949.00
—
$1,399.00
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 40 )
$1,059.50
—
$1,079.50
FLOTEK's 200cc small block as-cast ported chamber cylinder heads feature design by Jones Engineering, with 23-degree runners making impressive horsepower. Their power is ideal for street-strip usage and will post exceptional flow numbers right out of the box. The heads are available assembled or bare. Order the model with options recommended for your engine application. FLOTEK 200cc small block Chevy cylinder heads deliver the performance you're looking for! Notes, features and benefits: * This item is not sold as a pair; this is a single cylinder head * Versatile 200cc intake ports * 64cc combustion chamber * Phosphorous bronze valve guides * High-nickel valve seats * Ends already milled and drilled for accessories * Offered in solid or hydraulic cam design
( 18 )
$349.00
—
$669.00
Chevrolet Performance cast iron Vortec cylinder heads will fit 1958 and later small block Chevy engines, and offer a 20 to 40 hp increase over earlier cast iron small block heads. Features include fast burn combustion chambers, and a high-velocity port design. They require the use of a Vortec-style intake and self-aligning rocker arms, and come complete with valves, springs, and retainers.
( 6 )
$691.75
—
$1,258.33
These CNC-machined aluminum Fast Burn cylinder heads from Chevrolet Performance are designed for 1958-2000 283-400 c.i.d. Chevy V8s. They quickly and completely burn the air/fuel mixture, ensuring higher cylinder pressure and more power. No additional porting is required--Chevrolet Performance Parts' cast-ported technology gives these heads maximum performance right out of the box. They're drilled and tapped for Vortec and raised port manifolds, they accept flange-mount or centerbolt-style valve covers, and will support in excess of 500 HP.
Not Yet Reviewed
$1,514.83
Build the ultimate classic-looking hi-po Chevy small block with Trick Flow® DHC™ 200 cylinder heads. Patterned after Trick Flow's popular DHC™ 175 as-cast heads, DHC™ 200 heads get the full CNC-ported treatment to substantially ramp up power production. New 64cc CNC-profiled combustion chambers with 2.055 in. intake valves and CNC Street Ported runners promote big increases in high-RPM horsepower and torque. Bronze alloy valve guides, ductile iron valve seats, and stainless steel valves ensure excellent durability, while proprietary valve profiles and multi-angle valve seat machining maximize flow at low lift. Extra thick decks and walls increase casting strength for peace of mind in demanding conditions. Chromoly steel retainers, 7-degree machined steel valve locks, factory intake and exhaust port locations, and your choice of Trick Flow by PAC Racing valve springs are also standard. As with all Trick Flow® cylinder heads, DHC™ 200 heads are cast from A356-T61 aluminum to keep weight low. To preserve the vintage theme, exterior touches like straight spark plug holes, castings with or without accessory bolt holes, and other OE double hump head styling cues deliver the traditional look you're going for. Sold individually.
( 1 )
$949.99
—
$1,274.99
AFR 195cc SBC Eliminator Street Heads are fully CNC-machined (combustion chamber, intake, and exhaust ports) and available in your choice of straight or angled plug versions. AFR 195cc heads feature a 75cc or 65cc combustion chamber with a 64cc exhaust port and a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm, 2.050 in. intakes (competition versions are 2.080 in.) and 1.600 in. exhausts with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. The exceptional flow characteristics of AFR 195cc Eliminators, a 23 degree valve angle, and standard valve spacing make them the perfect street heads for 350 to 400 c.i.d. engines in the 2,000 to 6,500 rpm operating range. They carry CARB #D-250-2 when used on 1969-94 applications with the heat riser. Order the bare or assembled model recommended for your vehicle and engine.
( 40 )
$1,164.45
—
$2,328.90
AFR 190cc Vortec Eliminator Street cylinder heads have exceptional flow characteristics, are 50-state street legal, and the preferred choice over rebuilt factory heads. They feature 100 percent CNC-ported chambers, A356 aluminum castings, and high-quality components. These heads are recommended for street, strip, and towing engines operating up to 6,000 rpm from 350 to 383 cu. in. For performance, strength, and ease, install AFR 190cc Vortec Eliminator Street cylinder heads. Additional features include: * 3/4 in. extra-thick head deck * 2.020 in. intake and 1.600 in. exhaust valves * Center and perimeter valve cover bolt patterns * 0.100 in. raised exhaust port * Not compatible with self-aligning rocker arms
( 4 )
$2,391.90
When it comes to high power 23 degree cylinder heads for small block Chevy engines, you can't do any better than Trick Flow Super 23® 230 heads. They are so good because they are the closest thing you can get to 18 degree cylinder head performance in a 23 degree design! Plus, the Super 23 230 heads use all standard small block valvetrain parts and headers saving you time and money when swapping heads. Super 23 230 heads come standard with Trick Flow's advanced CNC Competition Ported runner design that features fully CNC-profiled combustion chambers and runners with a premium high resolution surface finish for maximum flow and performance. Additional highlights include angled spark plugs, extra-thick decks and walls for porting, and raised valve cover rails. Cylinder heads are available fully assembled or as bare castings. Sold individually.
Not Yet Reviewed
$974.99
—
$1,524.99
Trick Flow® Super 23® 195 cylinder heads give you performance that closely matches CNC-ported cylinder heads—for about the same price as ordinary cast heads! Ideal for 302 to 406 c.i.d. engines, the Super 23® 195 heads feature high-velocity, small cross-section intake runners to promote low-rpm torque and high-rpm horsepower. Fast As Cast® runners deliver near-CNC-ported flow and performance. Angled spark plugs, raised valve cover rails, and extra-thick decks and walls for porting round-out the features. Trick Flow Super 23 195 heads are a direct fit, high performance replacement for factory heads and accept most original accessories. They are emissions-legal under CARB E.O. #D-747-1 for 1995 and earlier GM vehicles with Chevy 262-350 engines. The heads are available fully assembled or as bare castings. Sold individually.
Not Yet Reviewed
$874.99
—
$924.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
