Availability
ARP Pro Series cylinder head studs are cold-forged to ensure molecular integrity. They're heat-treated prior to thread rolling and machining. ARP Pro Series kits are also available with 12-point nuts, and all studs come complete with hardened parallel washers for an even load distribution and accurate torque readings. With hundreds of models ready to ship, these cylinder head fasteners can be ordered for virtually any style engine.
( 783 )
$309.99
—
$1,044.99
The Pro Series cylinder head bolts from ARP are cold-forged to ensure molecular integrity. They are heat-treated prior to thread rolling and machining, and are rated at a whopping 190,000 psi. The Pro Series are also available with hex and 12-point heads. All kits come complete with hardened parallel washers for even load distribution and accurate torque readings.
( 163 )
$118.99
—
$237.99
ARP High Performance Series head bolt kits are tough. They are rated at 180,000 psi--15 percent stronger than Grade 8 fasteners. They come available with a reduced wrenching hex head or 12-point head that help eliminate the need for valvetrain removal when re-torqueing cylinder heads.
( 1018 )
$89.99
—
$228.99
AFR 260cc LS3 Mongoose cylinder heads are 100 percent 5-axis, CNC-ported, and feature titanium retainers, A356 aluminum castings, and Pac Racing springs. These CARB certified heads require 4.000 in. or larger bore applications on up through 454 cu. in. engines operating at or below 7,000 rpm—and flow over 380 cfm at 0.700 in. lift and are designed primarily for street and strip applications. Other structural features include Air Flow Research's trademark 3/4 in. thick head deck, reinforced rocker stud bosses, and thick wall runners provide unparalleled durability. Use of AFR stud girdles and full roller rocker arms are required. When it comes to building power, start with these AFR 260cc LS3 Mongoose cylinder heads.
( 5 )
$3,011.40
—
$3,490.20
Summit Racing™ precision cast cylinder heads are made from tough A-356 aluminum alloy and feature Permanent Mold "As-Cast" technology. Port accuracy is unrivaled--meaning CNC porting is not required to provide superior flow. The result is CNC-ported performance at a fraction of the price! We start with precision CNC-finished faces and bolt holes for accuracy and fitment. American craftsmen expertly size and install the manganese bronze valve guides and interlocking ductile iron seats before finishing with a competition-grade valve job. From there, the decks are given a final pass for superior finish. They are finish-assembled in the USA with top-quality components like PAC Racing springs, fasteners, one-piece 21 4N stainless valves, machined locks, Viton® seals and chromoly steel retainers. The final result is the performance you want and Summit Racing™ quality you TRUST!
( 11 )
$699.99
—
$764.99
AFR 210cc LS1/LS2/LS6 Enforcer cylinder heads are available in standard and small bore applications. They feature Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. The budget-friendly heads are perfect for your OEM engine operating below 6,300 rpm. Fully assembled Enforcer models include the identical components found in AFR's higher end CNC-ported cylinder heads—such as PAC Racing springs, Viton® valve seals, machined bead valve locks (not stamped), hardened spring seats, and one-piece 8mm 21 4N stainless steel valves. The heads are available without any parts for the DIY. Sold as a single piece, two heads are required per engine.
( 2 )
$562.80
—
$780.15
Summit Racing™ offers cylinder head bolt kits that will keep consistent clamping force on your heads and not your wallet! Our kits contain strong, high-quality steel bolts with either a black oxide or zinc plated finish for added durability. Some kits also include washers. Stay on budget--let Summit Racing™ help complete your cylinder head installation with our selection of cylinder head bolt kits.
( 83 )
$44.99
—
$53.99
Building on the features that make the GenX® 255 for GM LS3 great—like 12° valve angles and relocated valves for reduced valve shrouding and improved piston-to-valve clearance—Trick Flow's GenX® 280 HIP cylinder heads withstand the abuse of high horsepower, power-adder performance demanded by today's racers and engine builders. The GenX® 280 heads list of features is long, and it starts with the HIP'd (Hot Isostatic Pressed) castings. This process significantly increases the casting's density for improved tensile and fatigue strength. It continues with industry leading airflow through CNC Competition Ported 280cc intake ports and Trick-Alloy™ powdered metal valve guides for added longevity. Manley Severe Duty intake valves and Extreme Duty Inconel exhaust valves are designed to withstand the abuse of extreme temperatures and stresses of big power adder applications. Trick Flow® by PAC Racing dual valve springs, titanium retainers, .750-inch thick deck, and 6-bolt-per-cylinder mounting pattern round out the features. Trick Flow® GenX® 280 HIP cylinder heads for GM LS3 work with all LS3 intake manifolds and LS9/LSA blower assemblies and fit all LS head gasket and engine block combinations. These cylinder heads are available fully assembled or as bare castings. Sold individually. Key features: * 280cc intake ports and 67cc combustion chambers * HIP'd casting * Accepts 3/8 in. pushrods * Powdered metal valve guides * 2.165 in. NK-844 severe duty stainless steel intake valves * 1.600 in. XH-432 extreme duty Inconel exhaust valves * .750 in. thick deck * 6-bolt configuration * Assembled heads include a Trick Flow® LS3 rocker stand
Not Yet Reviewed
$1,349.99
—
$1,949.99
Trick Flow engineers used the best features of OEM GM LS3 and LS7 cylinder heads, combined with their own race-winning engineering and technology, to create the GenX® 255—the ultimate ultimate square port LS cylinder head for 4.000" and larger bore engines. The heads feature fully CNC Competition Ported runners with a premium high resolution surface finish for maximum airflow and performance potential. Stock LS3 ports accommodate LS3-style intake manifolds and LS9/LSA blower assemblies. The valve angles have been changed from 15° to 12° to increase piston-to-valve clearance and allow the use of larger camshafts. The coolant holes through the head deck were redesigned to work with all LS head gasket and engine block combinations. GenX 255 heads are available with standard or 6-bolt per cylinder mounting patterns. Trick Flow GenX 255 cylinder heads are emissions-legal under CARB E.O. #D-747 for 2007-present GM vehicles with 6.2L engines. They are available fully assembled or as bare castings. Sold individually.
( 7 )
$1,149.99
—
$1,599.99
Chevrolet Performance LSA cylinder heads offer high-strength cast aluminum casting for your supercharged application with premium steel intake and Inconel exhaust valves. Offering high strength, high flow, and high performance, LSA assembled cylinder heads provide an advantage to doing a build your way. Chevrolet Performance delivers those power-building attributes to you with a range of production-style aluminum heads.
( 2 )
$912.99
Fit any LS engine with Chevrolet Performance LS3 cylinder heads. Manufactured from aluminum alloy, these GM stock replacement heads are assembled with intake and exhaust valves, stem seals, retainers, springs, and locks. Great cylinder head airflow has always supplied the LS Series with exceptional performance. Retain that performance and save yourself time and worry by replacing your tired cylinder heads with Chevrolet Performance LS3 cylinder heads.
( 4 )
$1,069.03
On Sale
Summit Racing™ Extreme Duty cylinder head stud kits are engineered to withstand the stress and abuses that high-horsepower engines endure. These fastener kits come with all necessary studs, nuts, washers, lubricant, and instructions to ensure maximum performance and reliability. Order the hardware recommended for your year/make and engine application. Extreme Duty fasteners feature: * 190,000 psi tensile strength minimum * High-strength chromoly steel utilized for all products * Precision manufacturing processes ensure consistent product performance * All studs are twice straightened to guarantee straightness * Threads are rolled after heat treatment for high strength * Tensile and yield strength tested after thread rolling * Uniformly applied black oxide surface finish * Anti-rust oil coating to protect fasteners from corrosion
( 2 )
$259.99
Mahle Original fasteners deliver the clamping force necessary to seal the combustion chambers, as well as the oil and coolant passages--even at extreme temperatures and pressures. On your next cylinder head reassembly, use bolts designed to exact specifications for the best sealing solution--Mahle Original head bolt kits.
( 33 )
$28.99
—
$41.99
Don't waste time trying to figure out which parts you need to get the performance you want--Trick Flow® has already done the work for you! These GenX® Top-End engine kits for GM LS1 are designed and dyno-tested to deliver the performance you want for less than the cost of purchasing the parts separately. Each kit includes: * Pair of Trick Flow® GenX® street/strip cylinder heads * Specially matched hydraulic roller cam * Roller rocker arms * Pushrods * Head gaskets * Head bolts * Exhaust gaskets * Balancer bolt
( 3 )
$3,828.99
Trick Flow® GenX® 260 square port cylinder heads for GM LS7 are the best choice for your LS-based performance build for several reasons. The A356-T6 aluminum castings feature more material for increased rigidity and strength. Factory LS7 port locations, valve angles, and valve locations have been maintained to work with existing intakes and pistons. One-piece modular, 2024-T4 billet aluminum rocker arm mounts enhance valvetrain stability and are removable for shaft rocker setups. High flow, high velocity CNC Competition Ported runners with the premium high resolution surface finish provide all-out air flow and performance throughout the entire powerband. Plus there's clearance for 3/8" pushrods and through-deck coolant holes that fit all GM LS gasket and block combinations, Trick-Alloy™ powdered metal valve guides, and solid stem valves. Fully assembled heads also include Trick Flow® by PAC Racing Pacaloy valve springs, steel or titanium spring retainers, die forged steel valve locks, and stainless steel valves. Trick Flow® GenX® 260 cylinder heads are emissions-legal under CARB E.O. D-747 for 2006 to present GM vehicles with 7.0L engines. They are available fully assembled or as bare castings and sold individually.
( 2 )
$1,149.99
—
$1,599.99
Fel-Pro headbolt kits contain a complete set of the highest quality headbolts and hardened washers available. They're cold-formed to ensure molecular integrity, then heat-treated prior to thread rolling and machining. Reduced-diameter bolt heads eliminate the need for valvetrain removal and facilitate cylinder head re-torquing. The bolts are available in a variety of head styles for fitment on specific vehicle and cylinder head applications.
( 215 )
$25.99
—
$31.99
ATK high performance LS3/L92 25cc as cast aluminum cylinder heads are the perfect budget option for your next LS build. These fully assembled heads are capable of making over 600 hp naturally aspirated out of the box and will come loaded with upgraded components. The springs are set up to be used on up to .650 in. lift camshafts. No reason to swap parts on your new heads when running an upgraded cam! -- Features and benefits: * Bronze valve guides * Dual valve springs for .650 in. max lift * CNC-finished faces and bolt holes for extreme accuracy * 355-T6 high density aluminum * Machined for screw in studs and guide plates * All factory components will fit without modification -- Cylinder Head Specifications INTAKE: * Intake Runner Volume (cc): 252 * Intake Port Location: Standard * Intake Valves Included: Yes * Intake Valve Diameter (in): 2.160 in. EXHAUST: * Runner Volume (cc): 78.8 * Exhaust Valve Diameter (in): 1.600 in. * Exhaust Valves Included: Yes * Exhaust Runner: No * Port Shape: Round * Exhaust Port Location: Standard COMBUSTION CHAMBER: * Combustion Chamber Volume (cc): 69.4 * CNC-Machined Combustion Chamber: No VALVE SPECS: * Intake Valve Angle: 12 degrees (3 degrees rolled) * Exhaust Valve Angle: 12 degrees (3 degrees rolled) * Valve Guides Included: Yes * Valve Guide Material: Manganese Bronze * Valve Seats Machined: Yes * Valve Seat Machine Style: 5-Angle * Valve Seat Material: Chrome Nickle * Valve Stem Seals Included: Yes * Valve Stem Seal Style: Viton® Fluoroelastomer SPRINGS: * Valve Springs Included: Yes * Maximum Valve Lift (in): .650 in. * Spring Pressure Open: 370 @ 1.150 * Spring Pressure Closed: 142 @ 1.800 * Outside Diameter of Outer Spring (in): 1.29 in. * Damper Spring Included: Yes * Number of Springs per Valve: Dual * Retainers Included: Yes * Retainer Material: Chromoly Steel * Locks Included: Yes * Lock Style: 7 Degree ROCKER ARMS: * Rocker Arm Studs Included: No * Rocker Arms Included: N/A * Rocker Arm Nut Thread Size (in): 8 x 1.25 * Rocker Arm Nuts Included: No MISC: * Head Style: Assembled * Cylinder Head Material: Aluminum * Cylinder Head Finish: Natural * Spark Plug Style: Standard * Cover Mounting Style: Standard * Steam Holes Drilled: No * Oiling Style: Through Pushrod * Machined for O-Ring: No * Heat Crossover: No * 10mm Accessory Bolt Holes Machined On Ends of Heads
Not Yet Reviewed
$748.99
FLOTEK 276cc LS3 cylinder heads feature as-cast high-flow intake runners that flow significantly better than the stock LS3 heads. The ports are in the stock location, so no special valvetrain parts or rocker arms are required. These heads are 15 degree, which is the same as the stock cylinder heads—no special pistons are required. They will work on any LS block that has a 4 in. bore or larger. FLOTEK 276cc LS3 cylinder heads combine high performance and high quality at a value price. Select from bare or assembled models.
( 2 )
$539.00
—
$774.00
These Chevrolet Performance cylinder head bolt kits are designed for use with your GM heads. Everything is included to properly complete your cylinder head installation.
( 53 )
$42.20
—
$130.66
Transform your LS1 into a powerhouse! Trick Flow® GenX® 220 cylinder heads for GM 5.7L LS1 engines are a great value in performance. The cathedral port heads incorporate features of Trick Flow® fully CNC-ported LS heads in a more affordable "Fast As Cast®" version that flows nearly as much air as their competition ported heads. The special Fast As Cast® runner design duplicates the port shape and profile of fully CNC-ported runners, resulting in near-CNC-ported performance for the same price as regular cast cylinder heads. Other features include shallower 13.5 degree valve angles to decrease valve shrouding and increase mid-lift airflow, relocated spark plugs, CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending), improved rocker arm/valve cover clearance, and a rigid casting design. Trick Flow GenX 220 cylinder heads are emissions-legal under CARB E.O. D-747 for 1997-present GM vehicles with 5.7L and 6.0L engines. They are available fully assembled or as bare castings and sold individually.
Not Yet Reviewed
$849.99
—
$1,149.99
ARP high performance cylinder head stud kits are precision centerless-ground and thread-rolled to Mil-S-8879 specs. A black oxide finish protects them from wear and corrosion, and ARP throws in hardened parallel washers for uniform load distribution and accurate torque readings. Keep your cylinders mounted securely with a set of ARP high performance cylinder head studs; order the hardware recommended for your year/make and engine application
( 33 )
$320.99
—
$579.99
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 118 )
$1,549.95
—
$1,667.50
AFR valve guides are constructed from high-quality bronze for durability and wear. These guides are offered in a variety of diameters to suit your application.
( 3 )
$13.65
—
$220.50
BTR head bolts fasten your cylinder heads with high-quality steel. These Brian Tooley LS kits include enough bolts for one cylinder head. They're available for applications from 1997 and up.
Not Yet Reviewed
$39.99
—
$44.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
