Availability
Showing In Stock Items. Show All 129 Items.
These High Energy hydraulic lifters from COMP Cams feature a patented, constant orifice-metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and the precisely coined bottom surface of the pushrod seat is maintained throughout the engine's rpm range, eliminating excessive oiling at high speeds. The pushrod seat is made of a special powdered metal iron alloy, heat-treated for strength and wear resistance. The longer piston is produced with through-hardened steel that provides more bearing surface and increased lifter longevity. These lifters have a lightweight check valve disk that allows for quicker response, resulting in increased engine speed before valve float.
( 153 )
$14.95
—
$215.95
Ford Performance Parts guys live, eat, and sleep Ford. Their camshafts are designed for everything from mildly modified street rods to full-out drag racers. All Ford Performance Parts camshafts are designed for more power; with either improved low-to-mid rpm torque, or mid-to-high rpm horsepower. They're available in many different durations and valve lifts, in your choice of hydraulic, solid, or hydraulic roller lifter configurations. Depending on application, features may include: * More lift and duration * Available to work with stock pistons * No valve spring change required for some applications * Offered in grinds that provide noticeable power improvements with a lumpy idle while maintaining good drivability with manual transmissions * Also available as true street-strip camshafts that work best with manual transmissions or higher stall speed torque converters and high numerical rear-end gears * Offered in versions that work well with carburetors or mass air fuel injection
( 80 )
$210.99
—
$428.99
PAC Racing 1200 Series drag race valve springs are great for allowing you to get the most performance out of your engine. Select them when you're upgrading camshafts or doing engine rebuilds. The 1200 Series use a premium alloy that outperforms automotive industry standards; and PAC Racing processes the alloy to aerospace shot-peening standards to achieve superior fatigue dependability. This ensures that the springs maintain the load needed to perform during the most demanding times.
( 7 )
$19.86
—
$461.83
Make some noise with one of these Edelbrock Rollin' Thunder hydraulic roller cam, lifter, and pushrod kits. They feature a hydraulic roller camshaft and improved hydraulic roller lifters that have more aggressive profiles than conventional cams without excessive valve overlap. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about part compatibility with the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits, and you can be sure that all of the combinations will perform. Recommended for high performance street and strip use, the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits work best from 1,500 to 6,500 rpm and they maintain good vacuum at idle.
( 7 )
$1,583.95
—
$1,645.95
COMP Cams Xtreme Energy DLC hydraulic flat tappet lifters are quality yet inexpensive performance-proven lifters available in hydraulic and solid for multiple applications. These tappets feature a Diamond-Like Coating (DLC) face that forms an extremely hard, tough, and high-lubricity surface to reduce friction at the cam lobe/lifter interface, extending lifter and camshaft life significantly. The lifters maintain the excellent performance expected of a COMP product and are available for Chevrolet, Buick, Cadillac, Pontiac, Oldsmobile, Ford, Chrysler, and AMC applications requiring flat tappets. Additional details: * DLC: Diamond-Like Carbon * Wear-resistant * High lubricity * Cast-iron and steel camshaft compatible * Outstanding performance in Spintron durability testing simulation of an entire racing season * Excellent alternative to hard-to-find standard lifters
( 1 )
$7.95
—
$112.95
Since their release, Jesel Sportsman Series shaft rocker arms have proven themselves to be the ultimate replacements for inadequate stud rocker assemblies on OEM and aftermarket cylinder heads. The 2024 aluminum bodied rocker arms are designed to withstand open spring pressures of up to 900 lbs., while maintaining precise valve lash settings. They are designed to bolt on with little to no cylinder head modifications and in most cases still fit under a stock valve cover. The rocker geometry is preset and engineered using the common valve supplied with the specific cylinder head to provide a bolt-on-and-go installation. If you're still spending aggravating hours adjusting your stud rockers only to have to repeat the procedure the next weekend, Jesel Sportsman Series shaft rocker arms are your solution. Choose a set designed for your application.
( 23 )
$86.00
—
$1,765.00
Why are Performer RPM cam and lifter kits the heart of the Total Power Package? Because Edelbrock designs them to perfectly match the powerband of their Performer RPM series of intake manifolds. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about parts compatibility, and you can be sure that all of the combinations will perform. The kits are recommended for high-performance street and strip use. Their powerband is from 1,500 to 6,500 rpm, and they maintain 10 to 12 in. of vacuum at idle.
( 41 )
$385.95
—
$514.95
PAC Racing 1200 Series valve springs are great as replacement parts--or for pushing above and beyond the performance of OEM engines. Select them when you're upgrading camshafts or doing engine rebuilds. The 1200 Series use a premium alloy that outperforms automotive industry standards; and PAC Racing processes the alloy to aerospace shot-peening standards to achieve superior fatigue dependability. This ensures that the springs maintain the load needed to withstand rigors of both street and mild racing applications.
( 20 )
$9.50
—
$329.29
Sealed Power hydraulic lifters are precision-manufactured to maintain precise valve timing under all operating conditions. A patented constant orifice metering valve provides precise oil metering to the overhead valvetrain, and longer plungers or pistons provide increased bearing surfaces, resulting in longer lifter life. Their check valves are lightweight flat discs, allowing for higher speeds and more uniform operation than competitive lifters.
( 52 )
$5.99
—
$17.99
Summit Bucks
ACDelco GM Genuine Parts hydraulic roller lifters are designed as direct replacements for your engine, offering the quality, reliability, and durability of GM OE. They automatically help maintain a "zero" valve lash condition to help prevent valvetrain noise and unnecessary component wear. Stay with the parts brand your vehicle came with; order the lifters tailored for your specific GM make/model.
( 4 )
$23.99
—
$120.99
Milodon timing-gear drive assemblies are designed for all-out competition, but work equally well in any application. Their proven fixed idler gear system is capable of maintaining consistent cam timing without siphoning off power the way 4-gear types can. Timing changes are easy via Milodon's adjustable bolt pattern cam gears and hub assemblies. Made for strength and durability, these gear drives will last indefinitely. They are available in a flat-cover style, which uses a stock-type water pump, or an injected/blown style, which doesn't use a stock-type pump.
( 15 )
$479.95
—
$924.95
AFR stud girdles are designed to eliminate the rocker stud flexing and associated horsepower loss that come with today's high-lift cams and high-pressure valve springs. They are manufactured from sturdy anodized aluminum to keep your valvetrain rigid for maximum engine performance. Available for small block Chevy, small block Ford, and big block Chevy applications, the AFR stud girdles will maintain valvetrain longevity throughout the engine's entire rpm range.
( 55 )
$201.60
—
$312.90
COMP Cams NSR Stage 1 HRT hydraulic roller camshaft and lifter kits are designed for a substantial bolt-in power increase. They help you avoid costly breakdowns and early retirement of your Hemi engine by maintaining Spintron-proven valvetrain stability high into the rpm range. These cams provide great throttle response, mid-range torque and excellent power; they're perfect for heavier vehicles. Each kit includes everything needed, such as lifters, valve springs, push rods, and seals. Order the model recommended for your application. Wake up that late model Hemi engine and go with the proven a COMP Cams NSR Stage 1 HRT hydraulic roller camshaft and lifter kit.
( 1 )
$1,839.95
In today's higher rpm engines, the tip of the valve stem is subjected to a tremendous pounding. The best solution to this problem is COMP Cams' lash caps. These hardened lash caps are precision-machined and ground perfectly flat, to maintain accurate valvetrain adjustment.
( 30 )
$8.95
—
$80.95
PAC Racing 1200 Series circle track valve springs are great for providing your valve train with optimal performance. Select them when you're upgrading camshafts or doing engine rebuilds. The 1200 series use a premium alloy that outperforms automotive industry standards; and PAC Racing processes the alloy to aerospace shot-peening standards to achieve superior fatigue dependability. This ensures that the springs maintain the load needed to perform lap-after-lap.
( 3 )
$15.83
—
$414.20
Melling camshaft phasers (aka, sprocket actuators or variable valve timing sprockets) are constructed from high-quality durable steel and shipped with the mounting bolt that attaches the camshaft phase to the camshaft. Sprocket actuators adjust the timing of the motor to ensure that you get the engine power you need, when you need it. The actuator dials the timing back when you don't require the additional power, restoring fuel economy and maintaining engine efficiency. Melling replacement camshaft phasers meet or exceed OE specifications for precise fit and function in their recommended application.
( 3 )
$132.99
—
$169.50
Innovators West camshaft belt drive systems feature an aluminum machined cover with billet machined finish, anodized precision-machined pulleys, and top-quality Super Torque belts. All models include an adjustable idler pulley eccentric for maintaining proper belt tension, and camshaft timing is externally adjustable via the 2-piece top pulley with a 10-degree range. Cam thrust is controlled with Torrington needle bearings.
Not Yet Reviewed
$1,172.90
Maintain reliable valvetrain operation using a set of these Cam Motion chromoly pushrods. They are manufactured from durable chromoly steel to meet today's engines' higher valve spring pressures and rpm range. The pushrods are available in different diameters and wall thicknesses, so you can choose what's best for your engine's valvetrain configuration.
( 18 )
$8.41
—
$144.99
BTR conical valve springs are designed to maintain contact between your valvetrain components, so the valve motion will follow the cam profile. Each replacement spring is manufactured to exact specifications, as listed, for precise fitment. Conical valve springs from Brian Tooley Racing are a great choice for your application—trusted by engine builders worldwide!
( 1 )
$389.99
—
$449.99
Valve springs compress and rebound hundreds of times a second. Make sure your next set of valve springs are built to last—and built to win! Trick Flow® by PAC Racing single valve springs feature flat internal damping coils to prevent spring surge at high revs, maintaining proper spring pressure at critical load levels. PAC springs are CNC coiled from high tensile-strength, extra-durable Pacaloy chrome-silicon steel and double shot-peened beyond Aerospace Material Specifications (AMS) reliability standards.
( 23 )
$8.99
—
$188.99
Ford Genuine Parts camshaft sprockets are designed to exact specifications as the factory part on your Ford vehicle for proper form, fit, and functionality. These genuine replacement parts fit the same as the original factory part because they're made by the original equipment manufacturer. Camshaft sprockets ensure that the camshaft operates in sync with the crankshaft, allowing for optimal valve timing. Replacing a worn cam sprocket is a crucial aspect of maintaining your engine's performance. Get the parts you need with the correct fit and performance you expect with Ford Genuine Parts.
Not Yet Reviewed
$177.99
—
$205.99
Precise timing of your engine is necessary for vehicle performance. Scott Drake removable timing pointers will help you maintain accurate settings when mounted to your timing chain cover. They're made from stamped steel with a black zinc plated finish, and come with mounting screw.
( 42 )
$11.85
COMP Cams NSR drift hydraulic roller camshafts are designed for substantial bolt-in power increase—over 90 hp in some applications! They help you avoid costly breakdowns and early retirement of your LS engine by maintaining Spintron-proven valvetrain stability up to 7,500 rpm. These cams provide great throttle response, and may be the best possible drop-in cam for your budget 5.3L drift, road race, or drag build. Make 'em eat your dust with COMP Cams NSR drift hydraulic roller camshafts.
( 2 )
$541.95
Mopar Replacement camshaft gears are genuine parts you can count on to supply the OE-fit and function you're expecting. Manufactured from quality materials, these camshaft gears will provide the perfect choice to repair and maintain your Mopar ride with precision timing.
( 1 )
$338.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
