Availability
Showing In Stock Items. Show All 269 Items.
Standard Motor offers engine variable valve timing (VVT) oil control valves for a variety of applications, including many Chevrolet, GMC, and Cadillac vehicles. These direct-fit OE replacements effectively restore engine horsepower and torque curves while reducing emissions and improving vehicle efficiency. Anodized aluminum componentry limits sticking during sludge buildup to outlast any other aftermarket solenoid available. Premium O-rings and gaskets properly prevent premature oil leaks, where applicable. Each bolt-on unit undergoes extensive design process and 100 percent end-of-line testing to meet or exceed OE performance.
( 1 )
$38.99
Replacing the variable oil control valve helps restore fuel efficiency and keeps your engine operating normally. Melling VVT oil control valves are engineered for long durable performance. They are designed and built to the most stringent specifications using only the highest quality materials for worry-free performance. These are stock replacements that will provide the ideal fit for the vehicles specified. Select yours today.
Not Yet Reviewed
$54.99
The industry-leading camshaft designers at COMP Cams set out to engineer a camshaft specifically for the requirements of open wheel modified racers. They had to take on the daunting task of building maximum horsepower, while still taking into consideration the tire restrictions, chassis technology, engine combinations, and common rule packages found in open wheel modified racing sanctioning bodies, such as IMCA. The Open Wheel Modified Traction Control Camshaft Series is comprised of 10 solid flat tappet and mechanical roller grinds for small block Chevys. These powerful camshafts are separated into four categories, each of which is optimized for open wheel modified racing. A combination of proven camshaft design technologies and the most innovative and aggressive lobe profiles in the industry has produced camshafts that deliver an extremely wide powerband, pulling hard off the corner and all the way down the straightaway. A further benefit of the broad horsepower curve of these cams is that they minimize tire spin, creating legal traction control. These innovative grinds have been extensively track-tested, and they have been proven to run faster than any camshaft that has ever been tested for this type of racing. COMP Cams OWM T/C Series offers a cam for just about every open wheel modified racer.
Not Yet Reviewed
$341.95
—
$574.95
Crown Automotive variable valve timing oil control valves are direct-fit OE replacements that ensure factory-type performance and ease of installation. These solenoids are made of high-quality materials to withstand extreme conditions—and they undergo extensive testing to ensure reliability. Order the model recommended for your vehicle application.
Not Yet Reviewed
$40.99
—
$41.99
COMP Cams computer-controlled camshafts are specifically designed for the serious street performance enthusiast. Whether it's for a street rod or a show car with power accessories, one of these cams will fit your engine's needs.
( 46 )
$288.95
—
$549.95
COMP Cams computer-controlled cam and lifter kits are specifically designed for the serious street performance enthusiast. Whether it's for a street rod or a show car with power accessories, one of these kits will fit your engine's needs.
( 8 )
$390.95
—
$816.95
Melling offers their engine cylinder deactivation kits for converting active fuel management engines to non-active fuel management versions. These AFM (active fuel management) or MDS (multi-displacement system) delete combos include a variety of components to help complete the changeover. Order the Melling AFM/MDS delete combo best suited for your application. Each kit includes: * MDS delete camshaft (1) * Non-MDS hydraulic roller lifters (16) * Lifter guides for Non-MDS engines (4) Application dependent components include: * AFM/MDS solenoid plugs (4) * Camshaft thrust plate (1) * Variable Valve Tming (VVT) oil control valve (1) Notes: * When installing a delete cam, the active fuel management lifters must be replaced using non-active fuel management lifters. * The valve lifter guides used in non-active fuel management engines differ from those used in active fuel management engines and must be replaced for this application. * The AFM/MDS solenoids must be replaced using non-MDS plugs. * The vehicle engine control module/powertrain control module must be reprogrammed to turn off the active fuel management system in the operating software. * Pushrod length must be checked during installation to verify the correct length.
( 4 )
$634.99
—
$1,504.99
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 133 )
$199.99
—
$290.99
Dorman variable valve timing solenoids will restore the fuel efficiency and normal operation of your vehicle. These direct replacement solenoids are engineered from quality materials for a proper fit and years of effective performance. They easily plug into the electrical harness and come conveniently packaged with the installation gasket (where applicable). Maintain proper oil flow and pressure with Dorman variable valve timing solenoids.
( 27 )
$28.99
—
$365.95
Chevrolet Performance engine variable valve timing solenoids regulate oil flow to the cam phasers that change the timing of the camshafts. The desired positions of the camshaft varies with engine speed and load and is calibrated for optimal engine performance, drive quality, and efficiency. These solenoids are GM-recommended replacements for your vehicle's original components. These original equipment solenoids have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Not Yet Reviewed
$136.99
Summit Racing™ hydraulic lifters are designed with two things in mind: High quality and affordability. We think you'll be happy with the results. These lifters have a lengthened plunger, designed for less wear and to provide precise oil control through 6,000 rpm.
( 95 )
$7.99
—
$143.99
Summit Racing™ camshaft retainer plates secure your cam in the block where it belongs. Designed to fit behind the camshaft timing gear, these plates keep end play under control. They're available in different styles for fitment on a variety of Chevrolet small block, big block, LT, and LS-based engine applications from the 1990s and up.
( 89 )
$13.99
—
$19.99
ACDelco GM Genuine Parts engine timing covers are OE replacements for a variety of applications. The aluminum covers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. The timing cover is an essential component designed to protect the timing belt, timing chain or cam belt of your car from road debris, grime and gravel; timing belts or chains control the rotation of the camshafts and crankshaft in the internal combustion engine. Order the cover recommended for your vehicle.
( 1 )
$116.99
Utilizing years of valvetrain design experience, the latest FEA stress analysis technology, and an exhaustive testing regiment (dyno and Spintron), COMP Cams engineering team left no detail to chance. Everything from casting techniques to valve spring clearance was scrutinized to ensure that Ultra Pro Magnum rocker arms not only lived up to the lofty standards of their predecessor, but also took stud mount rocker performance, stability, and value to a whole new level. The most noticeable advancement centers around their nearly unbreakable investment cast 8650 chromoly body. The arched, web-like design delivers a nearly 29 percent increase in strength and rigidity, while reducing the moment of inertia and optimizing the dynamic balance. The resulting rockers maximize lift and valvetrain control at high rpm. The increased retainer and valve spring clearances of the new design enable the use of large-diameter valve springs, retainers, and locks, without clearance or fitment issues. The new black oxide exterior finish offers a distinctive appearance, along with long-term corrosion resistance. The COMP Cams Ultra Pro Magnum rocker arms feature an oversized trunnion and precision-sorted needle bearings designed for use with high-load valve springs. These unique rockers also feature hardened roller tips for reduced friction and elimination of the valve stem "side loading" that causes premature valve guide wear.
( 200 )
$45.95
—
$622.95
If you're looking for a cost-effective camshaft solution to delete that pesky DOD—Chevrolet Performance stock replacement non-DOD camshafts are the answer. They're designed to work with OEM valve springs/pushrods in the DOD-equipped Gen 4 trucks. These OEM camshafts are standard equipment on non-DOD 5.3L trucks. Since they come as a single-bolt style, new timing gear won't be necessary. Just swap cams and additional DOD delete parts (sold separately) and you're ready to roll! A fairly stock truck shouldn't require dyno tuning; however, the DOD system must be disabled in ECU for proper functionality. It is advised to consult with your tuner for more information. Order the model recommended for your year/make and engine application. Additional features include: * Hydraulic roller tappet cam * Single-bolt camshaft gear attachment * Computer-controlled compatible * This is the camshaft only (other components sold separately)
( 17 )
$194.99
—
$352.99
COMP Cams Evolution Series hydraulic roller lifters with Hydraulic Cartridge Technology (HCT) are revolutionary patented tappets. A combination of a self-contained hydraulic cartridge within a thick-wall lifter body and accompanying reduced oil volume that is less effected by oil aeration delivers the most consistent bleed rates between each lifter on the market. The smaller volume within the hydraulic cartridge creates one of the most responsive and quietest lifters on the market today. Startup noise is greatly reduced, and a precision-controlled bleed down rate ensures excellent performance at high RPM. The cartridge design also allows for an incredibly stiff lifter body, greatly reducing body distortion and further ensuring consistent hydraulic performance. The patented HCT tappets are a completely new design that was developed specifically by COMP Cams to meet the demanding performance and durability required for modern street and performance street engines. The HCT and proprietary manufacturing processes of these lifters ensure precision and longevity that exceed any lifter on the market. Other features include increased duration and lift to the camshaft and two oiling features. Another industry first is the fact that the hydraulic element of this patented lifter is serviceable, allowing anyone to rebuild lifters in his or her own garage. Order the Evolution lifters recommended for your year/make and engine application.
( 9 )
$40.95
—
$726.95
Performance cam designs require performance valve springs to keep everything under control and running smoothly. And modern springs with non-stock diameters require new retainers to handle the recommended higher pressures and installed heights. Summit's® steel valve spring retainers are an affordable solution. Precision-machined from 4140 chromoly and finished in black oxide, these retainers are specifically designed for positive retention and location when combined with performance valve springs. They're available for single, double, and beehive-style spring applications.
( 11 )
$2.99
—
$50.99
Strengthen your valvetrain using Summit Racing™ billet LS rocker stands. Our bars are stouter than factory, and are precision-cut from billet aluminum, helping to limit flex and distortion. Get assistance with rocker arm control; choose a set of Summit Racing™ LS rocker stands for your valvetrain.
( 6 )
$94.99
—
$99.99
Summit Racing™ Pro LS Single Plane cams are affordable and designed for racing applications where a carburetor and open exhaust are commonly found. These cams have slightly narrower lobe separation to increase torque and compliment short runner intakes. They come in distinct cam timing increments to give you maximum control over the power band. They're also designed with longevity in mind by taking stress off the valvetrain. These lobes remain stable to over 7,000 rpm with a common .600 and .670 lift dual spring kits.
( 21 )
$299.99
Howards Cams Rattler camshaft and lifter kits are designed for maximum performance. Utilizing the highest grade race quality cores available, the Rattlers are 100 percent Rockwell checked and Parkerized to ensure the highest quality control standards available anywhere. They're manufactured on dedicated high-precision CNC cam grinding machines, and the hydraulic lifters offer precision oil control. Howards Cams Rattler camshaft and lifter kits are ideal OE replacements, as well as for use in high performance racing applications.
( 25 )
$304.99
—
$1,054.99
COMP Cams introduces another industry first with their Max-Lift BSR shaft rocker systems, a bolt-in bushed shaft rocker system that increases valve train stiffness helping your engine achieve higher levels of performance. By tying all eight rocker arms together on a single shaft that fits in the stock rocker stand, COMP Cams has found a way to improve valve train dynamics, increase valve train stiffness and reduce deflection under extreme loads. The increased valve train stiffness created the BSR rocker system allows your existing cam to act like a larger camshaft by transferring more of the motion to the valve or the use of more aggressive, higher lift cams without losing control of the valve train. Take complete control of your valves with the COMP Cams Max-Lift BSR shaft rocker system.
( 3 )
$731.95
—
$883.95
Howards Cams performance hydraulic lifters are 100 percent Rockwell-tested. They are designed for maximum performance, while offering precision oil control. These lifters can be used as OE replacements, as well as in high performance racing applications.
( 26 )
$15.99
—
$199.99
These Manley NexTek valve springs are better-designed valve springs using state-of-the-art machinery for purpose-built racing engines. They're manufactured from super-clean, high-tensile chrome silicon steel and are shot-peened to MIL specs for maximum fatigue life. They feature a proprietary, multi-step heat-treating that minimizes load loss and have computer-aided modeling to minimize valve bounce and valve gear separation. The Manley NexTek valve springs are smaller diameter and lightweight, allowing engines to rev higher faster. They have an extended tip thickness designed to eliminate overload breakage, and their tightly controlled open-end flatness reduces valve stem side loading.
( 4 )
$18.20
—
$1,241.10
These COMP Cams adjustable phaser lock kits are easily adjustable and allocate locking over the OEM 50 degree phaser range. They allow you the use of larger, more aggressive aftermarket camshafts and are extremely durable. If you're looking for a way to gain more precise centerline control at high rpm under extreme conditions, then these high-quality adjustable phaser lock kits by COMP Cams will do the trick.
( 1 )
$131.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
