Availability
Showing In Stock Items. Show All 197 Items.
Standard Motor variable cam timing solenoids are direct-fit OE replacements for your vehicle's original components. These solenoids effectively restores engine horsepower and torque curves while reducing emissions and improving vehicle efficiency. Standard variable cam timing solenoids have been manufactured to exceed OEM specifications for dependable, accurate, maintenance-free operation.
( 4 )
$165.99
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 136 )
$27.99
—
$108.99
Trick Flow® Track Max® hydraulic roller camshafts for big block Mopar engines are designed and dyno-tested to ensure maximum performance. Track Max® camshafts are manufactured from premium blank cores that are heat-treated to the proper hardness. They're precision-ground to exacting tolerances to deliver enhanced power and proven Trick Flow® performance throughout the engine's powerband.
( 1 )
$520.99
COMP Cams Xtreme Energy cam and lifter kits are built to take advantage of the latest cam technology and provide maximum performance. Whether your use is off-roading, towing, or street performance, there are Xtreme Energy options available for you. By using an aggressive lobe profile, they provide better throttle response and more top-end horsepower than equivalent kits from other manufacturers, while delivering increased engine vacuum. Order the model designed for your vehicle and engine application.
( 388 )
$403.95
—
$678.95
Trick Flow® billet steel timing sets will provide accurate, reliable timing thanks to the billet steel gears and a double roller timing chain. They come with a 3-position or 9-position keyway that allows you to run the cam straight-up, retarded, or advanced.
( 21 )
$124.99
COMP Cams Xtreme Energy camshafts employ the latest cam technology to provide maximum performance. Whether your use is off-roading, towing, or street performance, there's an Xtreme Energy cam available for you. By using an aggressive lobe profile, these cams provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers—while delivering increased engine vacuum. Hundreds of models are available for fitment on vehicles from 1955 to the present. Select the cam designed for your application.
( 342 )
$282.95
—
$531.95
Milodon Street stainless valves are one-piece forged valves that are the perfect replacements for use in your street, Circle Track, or bracket racing engine. The intake valves are forged from quality HNV8 stainless steel, while the exhaust valves are forged from premium 21-4N material to withstand the extra heat and stress. The valves have hard-chromed stems and machined heads. They are designed to take a beating, with large seat margins which allows more than one regrind.
( 19 )
$146.95
—
$199.95
Cloyes is a worldwide leader in the manufacture and supply of automotive timing drive systems and components for aftermarket. Their timing crankshaft sprockets are precision-machined from various quality materials, depending on the application. You can rest assured that Cloyes timing crankshaft sprockets will fit properly.
( 1 )
$25.50
—
$50.99
COMP Cams Magnum pushrods are the perfect complement to your Hot Street, bracket, oval track, or any other high performance engine. One-piece Magnum pushrods are made of C1020 high-carbon, .080 in. wall chromoly steel and are heat-treated for use with guideplates. They're an affordable way to combat higher spring pressures and the other stresses associated with high performance engines.
( 458 )
$15.95
—
$152.95
No other racing valve on the market has superior materials, is lighter or will flow more than Milodon Megaflow racing valves, as proven by multiple independent engine builders and independent laboratories. These competition valves are forged from one piece of 21-4N stainless steel. They have swirl-polished heads, undercut stems for better gas flow, and tulipped underhead areas for weight savings. With their hardened stellite tips and 1,600 degree F temperature capabilities, they can withstand both high-heat and high-valvetrain stress loads.
( 17 )
$25.95
—
$252.95
Manley Severe Duty series performance valves are a great choice for your high performance or race engine. All valves are made from stainless steel (intakes are NK-844; exhausts are XH-428) with chrome stems and hardened valve tips. Severe Duty series valves are made of superior materials, are fully machined and swirl polished, and are available with either undercut "Pro Flo" stems or straight stems.
( 17 )
$35.84
Quicksilver Circle Track engines are designed to deliver torque and reliability, and they offer parts and components to keep your engine winning races and championships. Quicksilver Circle Track valve springs ensure valves close properly and at the right time, maintaining proper engine performance. These valve spring kits include retainers and locks.
Not Yet Reviewed
$1,524.99
You need to be sure that your engine is properly timed--especially if it's a high performance or racing mill--and that's exactly what Trans-Dapt Performance timing pointers can help you do. They're stamped or machined from durable, quality materials to deliver years of reliable service. Several versions offer pointers with a range of movement designed to let you get things "just right."
( 25 )
$6.99
No camshaft swap is complete without a new set of lifters. Treat your engine to the "good stuff" with new Trick Flow® hydraulic lifters or lash adjusters. Featuring durable hardened steel construction, these lifters and adjusters are a must when installing new cams—and are perfect replacements for worn or ticking lifters in used engines. The retro-fit roller lifters with vertical-style link bars are designed for a roller cam conversion in engines originally equipped with a hydraulic flat tappet cam. Overhead valve engines may require different length pushrods. The sets are available in a variety of fitment options for applications from 1955 and up.
( 47 )
$105.99
—
$814.99
COMP Cams Sportsman solid roller lifters feature premium-quality, high-value components designed for sportsman and professional racing, along with high-end street machines. They're available in both needle-bearing and bushing configurations. Each design features two pressurized EDM oil feeds, as well as an edge-orifice feed to the wheel. This delivers a more reliable oil feed than most competing options. COMP Cams Sportsman solid roller lifters are also designed with a shallower oil band than competitors' versions for increased strength and rigidity, while internal machining helps to reduce weight. The body utilizes a skirted wheel that strengthens the lifter ears, and the skirt also provides more contact area with the lifter bore for further lifter stabilization. In addition, staked axles eliminate clips and provide robust axle retention. This feature increases the stiffness of the lifter ears and helps to prevent the ears from spreading. The COMP Cams Sportsman solid roller lifters are built from 8620 premium steel for increased strength and wear resistance and they feature a captured, stainless steel link bar design. The lifters also utilize a tapered and slotted link bar tower for reduced weight and improved aesthetics. Choose the size and options tailored for your engine application.
( 9 )
$161.95
—
$1,255.95
PRW Dual Gear timing sets eliminate the stretching and premature wear common with timing chains. These dual idler gear drives fit under most timing chain covers with little to no machining, and offer more stability than single gear drives. The steel alloy gears provide longevity, and are available in noisy or quiet versions for most applications. Replace your old-school timing chains with more reliable PRW Dual Gear timing sets. Order the set recommended for your specific vehicle and engine size. Features, items, and specs may include: * Easy to install * SAE 660 bronze thrust ring * Rugged gear drives offer high-precision timing * Axial needle and cage thrust bearings and/or silicon bronze bushings reduce friction * Offset bushings for easy cam indexing and timing changes (for most applications) * PRW extreme-pressure assembly lube and threadlocker
Not Yet Reviewed
$209.95
Fidanza billet aluminum adjustable cam gears are CNC-machined from 6061-T6 billet aluminum. They feature 12 degrees of laser-etched adjustments in both directions, beveled tooth edges for increased belt life, and an outer hard-anodized gear for maximum strength. These Fidanza cam gears are available in several anodized finishes to fit your vehicle's style.
Not Yet Reviewed
$188.99
—
$199.49
Summit Racing™ hydraulic lifters are designed with two things in mind: High quality and affordability. We think you'll be happy with the results. These lifters have a lengthened plunger, designed for less wear and to provide precise oil control through 6,000 rpm.
( 104 )
$7.99
—
$143.99
Don't trust your engine investment to just any no-name rocker manufacturer. Harland Sharp heavy-duty roller rockers are specifically designed for the heavy spring pressure and high-lift geometry of highly modified engines. They're also engineered with wider bodies, resulting in increased rocker strength and longevity. So, when your engine requires extra durability, use Harland Sharp heavy-duty roller rockers.
( 60 )
$66.50
—
$1,069.99
Howards Cams Street series retrofit hydraulic roller lifters are designed for street performance enthusiasts who want to upgrade to a hydraulic roller camshaft. They are manufactured to fit early or late model blocks, including blocks with tall lifter bosses. Howards Cams uses cold form technology to shape their bodies for durability. The lifters are then carbonitrided and tempered for hardness. They also feature hardened and tempered steel alloy roller wheels, heat-treated stainless steel cross bars, and high-alloy steel tie bar buttons. Howards Cams Street series retrofit hydraulic roller lifters are specifically designed for street applications up to 6,500 rpm.
( 91 )
$121.99
—
$674.99
Get more for your dollar with Howards Cams Retro-Fit hydraulic roller camshaft and lifter kits. You'll get more lift and power for less money with these street performance grinds. They're perfect for those wanting to upgrade to hydraulic roller cams. Howards manufactures their cams using the highest grade race-quality cores and precision-grinds their cams to provide the quality and performance that you want at a reasonable price. They've matched these hydraulic cams with a perfect set of their premium lifters. Overhaul your valvetrain for mild to wild street performance with Howards Cams Retro-Fit hydraulic roller camshaft and lifter kits.
( 70 )
$1,089.99
COMP Cams Endure-X roller lifters set the standard for solid roller lifter technology. The hydraulic roller lifters are designed with oiling and inboard link bars, they're engineered to withstand the demands of aggressive cam lobe designs and increased RPM ranges. The lifters feature a wear-resistant tool steel axle, precision sorted needle bearings, and most applications include EDM oil injection technology that guarantees the bearing assembly receives a constant flow of oil. Endure-X solid roller lifters are heat treated, machined to ultra-high tolerances, and fully rebuildable.
( 41 )
$62.95
—
$780.95
Summit Racing offers True Roller timing sets for a wide range of vehicles from the 1950s and up. These single- or double-roller sets have rugged true-roller chains, teamed with steel crank and cam sprockets. The crank sprockets feature multiple keyways, which allow you to set the cam timing to your choice of degrees in advanced, retarded, or normal. Order the timing set recommended for your year, make, and engine application.
( 178 )
$74.99
These High Energy hydraulic lifters from COMP Cams feature a patented, constant orifice-metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and the precisely coined bottom surface of the pushrod seat is maintained throughout the engine's rpm range, eliminating excessive oiling at high speeds. The pushrod seat is made of a special powdered metal iron alloy, heat-treated for strength and wear resistance. The longer piston is produced with through-hardened steel that provides more bearing surface and increased lifter longevity. These lifters have a lightweight check valve disk that allows for quicker response, resulting in increased engine speed before valve float.
( 156 )
$14.95
—
$215.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
