Availability
Showing In Stock Items. Show All 146 Items.
Clearance
Mopar Replacement lifters offer an original equipment fit. That means their fitment and install will be hassle-free. Whether you call them lifters, tappets, or followers, these genuine Mopar replacements will fit the profile of your camshaft lobes to keep your engine running its best.
( 4 )
$49.99
—
$304.99
$27.50
—
$199.50
Clearance
Melling replacement hydraulic lifters are perfect for when you're ready to freshen up your engine. Melling has designed these lifters to be within factory tolerances for the perfect fit. They are affordable and available as flat or roller lifters.
( 38 )
$9.99
—
$48.99
$5.50
—
$22.50
Clearance
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 135 )
$30.99
—
$455.99
$23.50
—
$295.50
Clearance
PRW Pro Series stainless steel rocker arms are manufactured from lightweight, premium quality 17-4ph stainless steel—a superior alloy high in nickel and chromium. This rigid, premium material provides outstanding fatigue resistance, and high-yield strength to help resist deflection. These rocker arms feature full-cage, friction-reducing needle bearings, and extra-large trunnions to spread out the load and reduce wear. Each rocker body is hand-polished, assembled, and carefully inspected to deliver the finest quality available to the racing and performance industry. Reduce your valvetrain mass with durable, lightweight PRW Pro Series stainless steel rocker arms. Order the set recommended for your specific vehicle and engine size. Features, items, and specs: * Wide assortment of ratios to suit almost any cam profile * Each set of 16 comes complete with PRW RockerLocs * Stud-mount design provides plenty of clearance for large diameter springs * CNC-machined pushrod cups * Heat-treated steel nose rollers and shafts resist severity of racing and minimize scrubbing
( 9 )
$25.04
—
$31.55
$19.50
—
$22.50
Clearance
Howards Cams race series vertical bar hydraulic roller lifters offer proprietary hydraulic valving specifically designed for continuous operation to 6,600 rpm with ideal seat pressures between 150-160 lbs. The lifter bodies are fully machined from alloy steel bar stock and are completely micro-polished. The nose wheels are machined from 8620 material and the cases are hardened for durability. Howards Cams race series vertical bar hydraulic roller lifters are fully rebuildable.
( 6 )
$149.99
$99.50
Clearance
Howards Cams ProMax direct lube mechanical roller lifters feature "Full Time" high pressure oiling to the roller bearing shafts. This continuous oiling offers higher rpm and high spring pressure capabilities. ProMax lifters feature lightened steel alloy bodies with a special enhanced finish and heat-treated stainless steel link bars. The case-hardened 8620 rollers are fitted with the best alloy bearings and pins. These are the same materials and designs used on most Top Fuel lifters. The .300 in. taller body allows these lifters to fit early, late model, and aftermarket locks. Howards Cams ProMax direct lube mechanical roller lifters are also fully rebuildable.
( 5 )
$239.99
—
$1,114.99
$145.50
—
$835.50
Clearance
Cloyes timing chain and gear sets provide the ultimate in timing reliability. They include a steel crankshaft gear and either an aluminum or ductile iron camshaft gear, along with a chain. Cloyes timing chain and gear sets have been precision-hobbed and crown-shaved to provide an accurate gear-to-gear mesh with no wear and tear on the gears.
( 6 )
$453.99
—
$1,358.99
$293.50
—
$935.50
On Sale
Clearance
Standard Motor variable cam timing solenoids are direct-fit OE replacements for your vehicle's original components. These solenoids effectively restores engine horsepower and torque curves while reducing emissions and improving vehicle efficiency. Standard variable cam timing solenoids have been manufactured to exceed OEM specifications for dependable, accurate, maintenance-free operation.
( 4 )
$44.99
—
$492.99
$34.50
—
$379.50
Clearance
Perfect for replacements or stock rebuilds, Melling stock replacement camshafts can restore your engine's true potential. They're available in a variety of styles, including hydraulic flat tappet, roller tappet, and roller follower; and mechanical flat tappet. Melling offers affordable, quality engine parts, including a full line of cams for cars, light trucks, and imports as far back as the mid-1950s. If you want quality that you can count on at a price that's hard to beat, order the Melling stock replacement camshaft designed for fitment on your vehicle.
( 18 )
$196.99
—
$524.99
$145.50
—
$376.50
Clearance
Dove Manufacturing offers a variety of rocker arm replacement parts, including these end stand nuts. They're for use with 1046HD rocker assemblies when head studs are required. The end stand nuts are available for use on many Ford big block FE engine applications from the 1950s, '60s, and '70s.
Not Yet Reviewed
$41.79
$29.50
Clearance
Summit Racing™ Pro diesel camshafts are available for a variety of applications, including many Chevrolet Duramax V8 engines from 2001 to 2016. The solid roller style cams are offered in different models and options, such as all low-end power performance; mid-range; or top-end gains. Explore our Pro 1, Pro 2, and Pro 3 models, then select the grind and details that best suit your truck requirements.
Not Yet Reviewed
$699.99
$449.99
Clearance
Dove Manufacturing offers rocker arm stands for a variety of applications, including many Ford big block engines from the 1950s, '60s, and '70s. The shaft-mounting style center or end stands provide a base and pivot point for the rocker arms, keeping them aligned. Order the set recommended for your setup.
Not Yet Reviewed
$114.99
$79.50
Clearance
Howards Cams rev kits are designed for roller cam applications to increase valvetrain stability throughout the rpm range. In addition to increasing rpm capabilities, these rev kits will also keep the lifter in the lifter bore in the event of valvetrain failure. The locator bars and lifter buttons are made of the highest quality aluminum and are then anodized for protection. Each of these kits comes complete with locator bars, springs, and lifter buttons.
( 6 )
$164.99
$114.50
Clearance
INA lifters and followers will help maintain a consistent rate between your rocker arms and the engine valves. These OE-style replacement lifters and followers are made to factory specs, maintaining a proper lash condition while preventing unnecessary valvetrain wear and noise. Order the style and model designed for fitment on your specific vehicle.
( 2 )
$9.99
—
$27.99
$6.50
—
$26.50
Clearance
Offering a level of True Roller advantage for the value-racer, Cloyes upgraded the cam sprockets to feature the strength of billet steel and added critical functioning features. The billet steel durability, 9-keyway induction-hardened crank sprocket, .250 True Roller chain, and precise CNC machining together offer quality and adjustability unmatched in their class. Features include: • Billet steel cam sprocket • Induction heat-treated billet steel crank sprocket • 9 keyways allow +/- 8 degrees • Adjustability in 2 crank degree increments • True Roller chain with .250 in. diameter rollers
( 144 )
$141.99
$139.50
Clearance
Dove Manufacturing offers a variety of parts for high performance and racing equipment applications. These full roller aluminum rocker arms are available in different ratios and stud sizes (shaft mounting styles are also available). They're ideal replacements for a wide range of year/make and engine applications from the 1950s and up. Order the set (16) or kit recommended for your vehicle.
Not Yet Reviewed
$358.99
—
$541.99
$270.50
—
$389.50
Clearance
Dorman variable valve timing solenoids will restore the fuel efficiency and normal operation of your vehicle. These direct replacement solenoids are engineered from quality materials for a proper fit and years of effective performance. They easily plug into the electrical harness and come conveniently packaged with the installation gasket (where applicable). Maintain proper oil flow and pressure with Dorman variable valve timing solenoids.
( 27 )
$44.99
—
$217.99
$24.50
—
$125.50
Clearance
Howards Cams swedged end pushrods are engineered for maximum strength and durability. Produced from seamless 4130 chromoly aircraft tubing, each tube is through-hardened to a depth of .010 in. to .015 in. These pushrods are mirror-polished to eliminate the possibility of stress fractures and are finished in black oxide. Strong but light, they are well suited for roller applications. These pushrods are packed in a unique protective storage case.
( 71 )
$12.99
$8.50
Clearance
Melling M-Select Class 1 camshafts are part of their full line of high performance camshafts graded from Class 1 to Class 4. Class 1 camshafts have durations of 200 to 215 degrees at .050 in. lift. They feature good idle quality with strong low-rpm torque and midrange performance. These cams will work well with stock or slightly modified engines with either manual or automatic transmissions. M-Select Class 1 camshafts may have lower vacuum than OE camshafts.
( 33 )
$155.99
—
$201.99
$114.50
—
$120.50
Clearance
Mopar Replacement camshafts are a genuine direct fit into every application. No modifications are necessary, as they are the only identical OE replacement. Pick a make/model, select the engine, and your valve train will be firing as the day it came off the assembly line!
( 12 )
$432.99
$316.50
Clearance
Valve springs compress and rebound hundreds of times a second. Make sure your next set of valve springs are built to last—and built to win! Trick Flow® by PAC Racing single valve springs feature flat internal damping coils to prevent spring surge at high revs, maintaining proper spring pressure at critical load levels. PAC springs are CNC coiled from high tensile-strength, extra-durable Pacaloy chrome-silicon steel and double shot-peened beyond Aerospace Material Specifications (AMS) reliability standards.
( 23 )
$34.99
—
$39.99
$31.50
—
$34.50
Clearance
Howards Cams performance mechanical flat tappet valve springs are constructed from top-quality, aircraft-grade chrome silicone material, coiled and heat-treated in the finest facilities. Each spring is coiled, stress-relieved, deburred, shot-peened, and heat-treated to Howards Cams' very strict standards. Howards Cams constantly updates their materials and manufacturing techniques to provide the best possible valve springs.
( 1 )
$15.99
$10.50
Clearance
Cloyes engine time chain guides/tensioners are available in a variety of materials and finishes—for more than a dozen positions. They utilize the latest in design technology, ensuring proper fit and quiet, maintenance-free performance that meets or exceeds OEM requirements. Order the model recommended for your vehicle and engine application.
( 1 )
$27.99
—
$29.99
$15.50
—
$16.50
Clearance
Howards Cams Ovate inverted conical valve springs offer increased harmonic resistance for greater spring stability. They require less spring pressure for better valve control. This design is well known for GM Gen III, LS1, LS2, and LS6 applications but will also work for other applications. They're performance replacements featuring precision winding, heat-treating, and finishing processes. These springs are designed for stock-style retainers.
( 1 )
$152.99
$99.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
