Availability
Showing In Stock Items. Show All 527 Items.
Ford Performance Parts high-strength variable cam timing (VCT) solenoids offer a stronger mounting provision for racing applications. They're more robust and provide increased strength over OEM solenoids. Improve your chances for victory with a set of Ford Performance Parts high-strength VCT solenoids, available for a variety of Mustang and F-150 applications from 2011 and up. .
( 10 )
$106.99
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
( 272 )
$50.95
—
$114.95
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 133 )
$50.99
—
$108.99
Chevrolet Performance rocker arm stands mount between the shaft and cylinder head for the correct rocker arm mounting position. These rocker arm stands are quality-made for a lifetime of service.
( 15 )
$62.99
Melling factory replacement hydraulic roller lifters are designed and built to get the job done while ensuring efficient performance and quiet valve train operation. They are perfect for when you're ready to freshen up your engine. Melling factory hydraulic roller lifters are manufactured from the finest materials and designed for the proper fit and long dependable lifter life.
( 20 )
$54.99
New valve springs with larger diameters require new retainers to handle the higher pressures developed by the springs. COMP Cams valve spring retainers are the solution. Precision-machined, these retainers are specifically designed for positive location when combined with COMP Cams' valve springs. They're available for single, double and triple-spring applications.
( 164 )
$52.95
—
$110.95
Building a performance street machine? COMP Cams Magnum double row timing sets are built for mild performance on the street. They have heat-treated, pre-stretched, large-pin, double-row chains for extra strength and reliability. They also have an induction hardened cast iron camshaft gear and billet steel crank sprocket with three keyways, which allow you to set cam timing at 4 degrees advanced, 4 degrees retarded, or normal. In addition, all COMP Cams Magnum double row timing sets are dynamically balanced for smoother operation.
( 113 )
$83.95
ACDelco GM Genuine Parts engine valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of or validated by General Motors for GM vehicles. For the optimal performance, replace your vehicle's parts with those made by the original manufacturer—ACDelco GM Genuine Parts.
( 1 )
$54.99
COMP Cams pushrod guideplates are necessary in high-rpm motors. They keep your pushrods in line with your lifter cups and rocker arms—and prevent deflecting or walking sideways. The guideplates are hardened to prevent premature wear. They're available in sizes and styles for fitment on a variety of engine applications.
( 180 )
$57.95
—
$81.95
Since their release, Jesel Sportsman Series shaft rocker arms have proven themselves to be the ultimate replacements for inadequate stud rocker assemblies on OEM and aftermarket cylinder heads. The 2024 aluminum bodied rocker arms are designed to withstand open spring pressures of up to 900 lbs., while maintaining precise valve lash settings. They are designed to bolt on with little to no cylinder head modifications and in most cases still fit under a stock valve cover. The rocker geometry is preset and engineered using the common valve supplied with the specific cylinder head to provide a bolt-on-and-go installation. If you're still spending aggravating hours adjusting your stud rockers only to have to repeat the procedure the next weekend, Jesel Sportsman Series shaft rocker arms are your solution. Choose a set designed for your application.
( 23 )
$86.00
Cloyes heavy-duty timing sets supply everything you need from a timing chain—performance and reliability. The cam sprockets are machined from cast iron with billet steel crank sprockets. Cloyes heavy-duty timing sets are available in single or double roller versions and offer .200 in. (for small blocks) or .222 in. (for big blocks) diameter double roller chains. Cloyes heavy-duty timing sets are considered the industry's most reliable workhorses. They're engine- or model-specific; order the set designed for your application.
( 292 )
$50.99
—
$103.99
Building a high performance vehicle? Chevrolet Performance timing chain sets are designed for use with either performance or stock cams. These timing chain sets are affordable and deliver long lasting trouble free reliability.
( 27 )
$94.20
—
$108.39
BTR Equalizer billet fuel rail kits are designed for use with the Equalizer line of intake manifolds. They're made from the highest quality 6061 billet aluminum, and include steel brackets for the most rigid fitment. The fuel rails are anodized in gloss black with a laser-etched BTR logo and feature -8 AN O-ring boss (ORB) openings on either end. All BTR Equalizer fuel rail kits come with stainless hardware. The kits are available for multiple Chevy small block engine applications from 1997 and up.
( 4 )
$99.99
Proform high-performance gear drive sets offer high-precision timing, eliminating chain stretch. They are machined for noise, easy to install, and fit under stock timing covers.
( 38 )
$100.99
Crower polylocks for roller-tip, needle-bearing rocker arms are made from high quality, heat treated chromoly steel. These Crower sure lock nuts allow for precise adjustments. They include nuts and Allen head set screws for positive jam nut operation.
( 38 )
$55.99
—
$78.99
Jesel replacement rocker arm adjuster kits are designed to help you rebuild your Jesel rocker arm. They include four cup adjusters, four 12-point nuts, four washers, and assembly lube.
( 3 )
$104.00
Cloyes street true roller timing sets are aimed at the value-driven racer. They have precision-machined, cast iron cam sprockets and induction-hardened, billet steel crank sprockets. The crank sprockets have three keyways for timing adjustment--4 degrees retarded, 4 degrees advanced, and normal. The chains are rugged, double-row types with oversized 0.250 in. rollers that deliver long life and reliability.
( 126 )
$52.99
—
$101.99
Edelbrock rocker arm stud bolt kits are designed for use with the Edelbrock Performer and RPM small block Chevy and Ford cylinder head applications. These screw-in style rocker arm stud bolts are manufactured from high-quality material for strength and durability and run in straight and true to offer nothing less than positive seating.
( 23 )
$64.95
—
$67.95
ATP timing covers are a crucial part of any engine. They allow for the proper lubrication of the timing chain and protect it from damage. Timing covers can become damaged from over-tightening or corrosion, causing engine oil leaks—and resulting in significant engine damage. ATP timing covers function and fit just like the original parts, ensuring long life and durability. Order the model recommended for your vehicle and engine application.
( 32 )
$57.99
—
$90.99
End your camshaft timing worries with ARP Pro Series cam bolt kits! Featuring 200,000 psi tensile strength, these kits deliver increased preload clamping force and ensure positive timing gear register. Their incredible material strength overcomes valvetrain harmonics and stress for excellent performance and durability. ARP Pro Series cam bolts are designed with oversized heads to promote cam bolt retention, while their reduced socket head size allows for easy installation and removal. Don't settle for inferior-quality cam bolts--stick with ARP Pro Series cam bolt kits for camshaft timing confidence!
( 8 )
$72.99
Edelbrock Performer-Link true roller timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. Crank gears are machined from SAE 1144 stress-proof steel. Most Edelbrock Performer-Link true roller timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set cam timing 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. Edelbrock Performer-Link true roller timing chain sets are not for use above 6,500 rpm.
( 171 )
$66.95
—
$117.95
COMP Cams High Energy pushrods are your best choice when building an engine for your street rod, RV, or everyday driver. COMP Cams High Energy pushrods are manufactured to meet or exceed all original equipment specifications for pushrods. They will mate perfectly with High Energy or Magnum rockers.
( 240 )
$51.95
—
$112.95
As with all other areas in the valvetrain, the area where the spring sits also takes a beating. The old standard shims and/or seats simply will not hold up to the extreme pressures and high rpm found in today's performance engines. COMP Cams valve spring locators solve this problem and eliminate failures.
( 75 )
$65.95
—
$83.95
Built to outlast and outperform in accuracy and strength, Ultra Pro Magnum XD roller rocker arms are engineered from durable 8650 steel and include a machined billet pushrod seat insert for a wide range of super accurate ratios. A unique and wide ratio range to fit almost any popular application from 1.5 to 1.8 in 0.5 in. increments for Chevy and 1.6 to 1.73 for various Ford applications is available. These Ultra Pro Magnum XD rockers are fully rebuildable and boast precision-sorted needle bearings and hardened roller tips. And, they work with most diameter springs and retainers. The XD design utilizes advanced FEA and CAD design and development to improve strength, stiffness and MOI (moment of inertia) optimization for drag and circle track applications.
( 59 )
$55.95
—
$59.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
