Availability
Showing In Stock Items. Show All 27 Items.
The only choice for serious racing—Cloyes Z-Racing billet timing sets. These track-proven billet race sets feature induction heat-treated sprockets, hand-matched with the high-strength of a heat-treated chain. Cloyes Z-chain offers 33 percent more overall strength than their premium chain, making it the most durable and dependable choice for extreme builds and racers that demand no compromise. The fine blanked links reduce stress risers, thus minimizing fractures under severe load. The press-fit center links improve load share by reducing load spikes on any single component. When you're determined to win, team up with Cloyes Z-Racing billet timing sets for successful performance.
( 21 )
$254.99
—
$479.99
Utilizing years of valvetrain design experience, the latest FEA stress analysis technology, and an exhaustive testing regiment (dyno and Spintron), COMP Cams engineering team left no detail to chance. Everything from casting techniques to valve spring clearance was scrutinized to ensure that Ultra Pro Magnum rocker arms not only lived up to the lofty standards of their predecessor, but also took stud mount rocker performance, stability, and value to a whole new level. The most noticeable advancement centers around their nearly unbreakable investment cast 8650 chromoly body. The arched, web-like design delivers a nearly 29 percent increase in strength and rigidity, while reducing the moment of inertia and optimizing the dynamic balance. The resulting rockers maximize lift and valvetrain control at high rpm. The increased retainer and valve spring clearances of the new design enable the use of large-diameter valve springs, retainers, and locks, without clearance or fitment issues. The new black oxide exterior finish offers a distinctive appearance, along with long-term corrosion resistance. The COMP Cams Ultra Pro Magnum rocker arms feature an oversized trunnion and precision-sorted needle bearings designed for use with high-load valve springs. These unique rockers also feature hardened roller tips for reduced friction and elimination of the valve stem "side loading" that causes premature valve guide wear.
( 200 )
$255.95
—
$541.95
Today's cams have more aggressive lobes. That's why increasing the oil supply to these lobes is critical. Howards Cams uses a precision "E.D.M." laser to burn a .021 in. hole in the center of the face of their direct lube extreme-duty mechanical lifters. This allows for a constant oil supply to the cam lobe, resulting in higher valve spring pressures, more aggressive profiles, and reduced lobe wear.
( 28 )
$253.99
—
$389.99
BTR V2 Series camshafts are designed for excellent performance and drivability. The V2 is a revised camshaft that provides more average torque, higher peak power, and a maximum depth heat treatment. The maximum heat treatment depth is achieved by using cam cores made within a few thousandths of final grind size. Numerous grinds for turbo, supercharged, and naturally aspirated engines are available for your project—all backed by years of experience, knowledge, and a passion for power. BTR V2 Series camshaft features include: * Revised camshaft center lines for increased average torque * Engine dyno verified to produce more power * Each "stage" has a specific cam core * Maximum heat treatment penetration
( 3 )
$389.99
—
$409.99
Howards Cams Rattler camshafts build solid power and a classic sound while retaining drivability. They feature wider lobe centers and use a more aggressive ramp rate to help with air velocity. Although their design is for high-performance street use, they also work well with a stock torque converter. Howards Cams recommends using their Rattler camshafts with a converter stalling above 1,800 rpm and a set of steeper rear-end gears.
( 25 )
$252.99
—
$516.99
Good things come in small packages. If you're a later style Chevy engine owner, you already know that, and Scorpion narrow body self-aligning rockers arms are a perfect choice. These 100 percent CNC-machined rockers are made for your center bolt-down valve covers and eliminate the guideplate. Their aluminum narrow body is self-aligning and can easily handle a .950 in. lift and 950 lbs. of open spring pressure. Scorpion narrow body self-aligning rocker arms have micro-polished surfaces and anodized coatings for maximum durability and a great long-lasting look. Pick up some narrow body stingers from Scorpion and watch the competition scatter! Additional features: * Needle bearing fulcrum and roller tip * Centerless-ground trunnion * Ground pin and roller * Burr-free trunnion through hole * Black oxide coated steel parts * Lightweight for maximum performance
( 18 )
$349.51
—
$471.01
Cloyes Race Billet True Roller timing sets provide race-ready performance! These sets feature sprockets machined from premium billet steel on state-of-the-art CNC equipment to ensure the highest quality and consistency. The sprockets are induction-hardened and oil-quenched by Cloyes' in-house, multi-stage heat treat process. Sets include a Cloyes Premium True Roller chain—which features full roller action and superior strength. Side plates are cut and shaved from high-strength steel and are heat-treated for maximum fatigue resistance. Their .250 in. rollers are cold-rolled and hardened to exacting standards, increasing load and rpm capabilities. Cloyes Race Billet True Roller Speed Sets are offered with a choice of 3-or 9-keyway crank sprockets, providing multiple valve timing settings. These sets are hand-matched to qualify center distance and runout, ensuring the best performance with every set!
( 96 )
$303.99
Manley titanium valve spring retainers are a great way to lighten your valvetrain, in order to rev higher and make more power. They're manufactured in Manley's own CNC turning centers from special heat-treated 6Al-4V titanium alloy, selected to deliver maximum strength and reliability. These retainers are excellent for all types of racing.
( 5 )
$252.27
—
$504.52
Good things come in small packages. If you're a later style Chevy engine owner, you already know that, and Scorpion narrow body rockers arms are a perfect choice. These 100 percent CNC-machined rockers are made for your center bolt-down valve covers. These aluminum narrow body rocker arms can easily handle a .950 in. lift and 950 lbs. of open spring pressure. Scorpion narrow body rocker arms have micro-polished surfaces and anodized coatings for maximum durability and a great long-lasting look. Pick up some narrow body stingers from Scorpion and watch the competition scatter! Additional features: * Needle bearing fulcrum and roller tip * Centerless-ground trunnion * Ground pin and roller * Burr-free trunnion through hole * Black oxide coated steel parts * Lightweight for maximum performance
( 13 )
$329.37
—
$443.13
Designed specifically for high performance street and race engines, COMP Cams Ultra Gold ARC Series aluminum rocker arms are precision CNC-machined to strict tolerances. They incorporate modern technology and design features to create the most advanced aluminum rocker arms available. Proven to withstand extremely aggressive spring pressure, the COMP Cams Ultra Gold ARC Series aluminum rocker arms use their CNC-machined aluminum design for high quality and the ultimate in ratio accuracy.
( 112 )
$299.95
—
$558.95
Why are Performer RPM cam and lifter kits the heart of the Total Power Package? Because Edelbrock designs them to perfectly match the powerband of their Performer RPM series of intake manifolds. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about parts compatibility, and you can be sure that all of the combinations will perform. The kits are recommended for high-performance street and strip use. Their powerband is from 1,500 to 6,500 rpm, and they maintain 10 to 12 in. of vacuum at idle.
( 41 )
$448.95
—
$455.95
Edelbrock Performer-Plus cam and lifter kits are designed for optimum torque from the low-end to the mid-range. They feature smooth idling cams for daily drivers, trucks, vans, RVs, and 4x4s. They offer improved throttle response and torque. Each kit includes a camshaft, hydraulic lifters, assembly lube, and instructions.
( 113 )
$329.95
—
$375.95
With Cloyes Hex-A-Just timing sets, infinitely adjustable cam timing is as simple as turning an Allen wrench. Consisting of SAE 1144 billet steel cam and crank sprockets and a true roller timing chain, these timing sets use a special hex-head bushing installed on your cam's dowel pin. This bushing lines up with degree marks on the cam sprocket. You can adjust timing in fractions of a degree (as much as +/-6 degrees) by loosening the cam bolts and turning the bushing with an Allen wrench. Cloyes Hex-A-Just timing sets install under your stock timing cover and can be used in align-bored blocks. Order the model designed for your vehicle and engine application.
( 34 )
$251.99
—
$338.99
Cloyes Hex-A-Just Z-Racing timing sets allow the engine builder everything he needs to quickly and easily adjust cam timing to maximize engine output. They feature a complete set of chains and sprockets for flexible timing adjustments to set the cam timing exactly as desired for improved performance and durability. The Z Series chain design increases overall strength and is the no-compromise offering for serious racing engines.
( 3 )
$250.99
—
$379.99
Tap into the power of your Milwaukee 8 engine by installing an S&S Cycle camshaft. These kits will increase the torque and horsepower of your bike. They include all required gaskets, O-rings, bearings, and hardware. Order the model recommended for your Harley-Davidson® application.
Not Yet Reviewed
$269.96
Melling M-Select Class 1 camshafts are part of their full line of high performance camshafts graded from Class 1 to Class 4. Class 1 camshafts have durations of 200 to 215 degrees at .050 in. lift. They feature good idle quality with strong low-rpm torque and midrange performance. These cams will work well with stock or slightly modified engines with either manual or automatic transmissions. M-Select Class 1 camshafts may have lower vacuum than OE camshafts.
( 33 )
$332.99
—
$365.99
Make some noise with Edelbrock Rollin' Thunder hydraulic roller camshafts. Designed to improve horsepower and torque, they feature more aggressive profiles than conventional flat-tappet hydraulic cams without excessive valve overlap. Recommended for high performance street and strip use, Edelbrock Rollin' Thunder hydraulic roller camshafts work best from 1,500 to 6,500 rpm and are performance matched to Edelbrock Total Power Package components for proven performance. Features Include: * Performance--roller camshafts generate higher lift velocity and faster valve action for increased horsepower and torque gains * Drivability--produces great sounding idle with excellent vacuum at idle * Durability--the smaller surface contact area of roller tappets and their reduced friction, together with stronger camshaft material (hardened steel or iron) ensures longer camshaft life * Environmental--can use ILSAC GF-4 oil, which lowers emissions and does not require zinc or phosphate oil additives * Economy--reduced contact friction between the lifter and camshaft can increase fuel economy for better mileage
( 28 )
$555.95
Designed to work with Edelbrock's Torker II manifolds for performance from 2,500 to 6,500 rpm, these Torker-Plus cam and lifter kits are ideal for high-performance street, drag, or marine applications. Torker-Plus cams have a slightly rough idle and are not suitable for trucks or towing applications.
( 4 )
$440.95
Offering a level of True Roller advantage for the value-racer, Cloyes upgraded the cam sprockets to feature the strength of billet steel and added critical functioning features. The billet steel durability, 9-keyway induction-hardened crank sprocket, .250 True Roller chain, and precise CNC machining together offer quality and adjustability unmatched in their class. Features include: • Billet steel cam sprocket • Induction heat-treated billet steel crank sprocket • 9 keyways allow +/- 8 degrees • Adjustability in 2 crank degree increments • True Roller chain with .250 in. diameter rollers
( 142 )
$353.99
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 133 )
$397.99
If you plan on adding performance to your street machine or building a serious racer, Harland Sharp Original Series roller rockers are recommended for you. Using the very latest manufacturing technology and only the very finest materials, the Original Series rockers incorporate race-proven enhancements, such as improved strength, performance, and lighter weight over conventional rocker arm designs. Don't settle for any old rocker arm--go with a true leader in roller rocker arm technology--Harland Sharp.
( 175 )
$432.99
The Mr. Horsepower legend began in the early 1930s with camshafts that were hand-ground by Clay Smith to high performance specifications. The legacy lives on today through Clay Smith Cams. These camshafts are the perfect choice for your next engine rebuild or upgrade. They're are available in a wide range of profiles to improve airflow—whether you're drag racing, sled pulling, daily driving, or towing 30,000 lbs. in the mountains. Choose the style and specs recommended for your vehicle and engine application. Clay Smith camshafts deliver performance!
( 12 )
$462.65
With a name that's synonymous with Harland Sharp and their cutting-edge roller rocker arm technology, their Diamond roller rockers are the perfect solution for the engine builder or serious racer requiring every possible weight and output advantage. Harland Sharp recognizes that every gram of weight eliminated from the reciprocating mass can help to increase net horsepower. With Diamond roller rockers, you are able to increase engine horsepower/rpm quicker and compete with a reliable, lightweight valvetrain. For the finest rocker arms for racing engines, use Harland Sharp.
( 2 )
$427.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
