Availability
Showing In Stock Items. Show All 28 Items.
Edelbrock rocker arm stud bolt kits are designed for use with the Edelbrock Performer and RPM small block Chevy and Ford cylinder head applications. These screw-in style rocker arm stud bolts are manufactured from high-quality material for strength and durability and run in straight and true to offer nothing less than positive seating.
( 22 )
$23.95
—
$64.95
Improve valvetrain stability with these Chevrolet Performance rocker arm studs. These studs are available in several sizes and for a variety of engine applications.
( 4 )
$42.32
ARP High Performance Series rocker arm studs are ideal for ET bracket racing, limited rule oval track competition, or street use. Made from 8740 chromoly steel and are heat-treated to 180,000 psi tensile strength, they are concentric within .005 T.I.R. thread pitch to thread pitch, which will give you more consistent rocker geometry. With an extra-large radius base, they are more resistant to flex and will provide a more positive seating. These rocker arm studs are designed to be used with Perma-Loc adjusters (not for use with OEM-style, self-locking nuts).
( 223 )
$20.99
PAC Racing 500 Series valve spring retainers are every bit as reliable as retainers 20 percent heavier. These retainers are produced from the finest proprietary high-tensile titanium alloy for incredible wear and strength. PAC's engineers take this material and form the ultimate lightweight retainers. They are designed for high-rpm professional racing and abusive or severe engine applications. When you're building severe engines, you need parts designed to withstand incredible heat and rpm. PAC Racing 500 Series valve spring retainers are built to take all that you can give.
( 2 )
$29.55
BluePrint Engines offers timing pointers for a variety of applications, including select Ford small block V8 engines from 1968 and up. These tools are used to set or check the timing of an engine's ignition system. They attach to the engine block and point to timing marks on the harmonic balancer. The pointer can be moved to match up with the measured TDC (top dead center).
( 1 )
$40.95
Trick Flow® steel valve spring retainers are made from hardened 4140 chromoly steel for great performance characteristics and reliability. On top of that, they're black-oxide coated for corrosion protection and good looks. They install at standard height and there are versions available for single or double springs and 7 or 10 degree valve stem locks.
( 13 )
$31.99
—
$57.99
Top off your timing chain installation the right way with one of these chrome timing chain covers. Engineered to GM standards, they are made from heavy gauge steel that is 20 percent thicker than typical timing covers, greatly reducing the likelihood of leakage around the timing cover flange area caused by fasteners being overtorqued. These covers bear the Chevrolet and Bowtie logos and are triple chrome plated for long lasting beauty. They will fit all engines with a bolt-on pointer and are supplied with a production GM oil seal already installed.
( 4 )
$20.99
Summit Racing™ replacement valves are designed for our A-356 cast aluminum heads. These stainless steel valves are just like the ones you received originally, so you can rest assured that they will fit and perform perfectly! When you need quality components, Summit Racing™ offers the replacement valves to maintain top performance.
( 1 )
$26.99
For the enthusiast who chooses a solid lifter cam, COMP Cams offers the highest quality solid lifters available today. These lifters are manufactured using the tightest tolerances in the industry, ensuring optimum performance. The crown of the lifters is ground to a precise radius for proper break-in and to guarantee long life. The oil-metering band is milled to the correct depth to prevent too much oil from being delivered to the top of the motor, and to prevent horsepower loss. Order the size and quantity needed for your engine application.
( 27 )
$24.95
—
$62.95
COMP Cams's XD-A pushrods offer a game-changing method for accurately setting lash or pre-load while using non-adjustable-style rockers. These patent-pending pushrods incorporate a top section that slides 2 in. inside a wider bottom section, with one or two shims captured in-between. Proven to 9,000-plus rpm in solid roller LS applications, the system provides a 90 percent increase in bending stiffness for enhanced valvetrain stability. It also allows for lightening of a rocker arm system by 30-plus grams on the backside by removing the adjuster and required support area for threads and seating. The use of lighter rockers with XD-A adjustable pushrods allow higher rpm to be achieved by creating a much more dynamically stable valvetrain system. COMP Cam XD-A pushrods are designed especially for engines with low-mass rocker arms and a light valvetrain with drop-in fitment in LS engines. They can be adjusted over a range of .172 in. in .004 in. increments with shims. Choose the pushrods with the adjustment range needed for your setup.
Not Yet Reviewed
$24.95
OTC offers crankshaft TDC timing pins for a variety of cars and trucks. These replacement tools locate the top dead center position of your pistons for the most efficient operation. Order the model recommended for your vehicle and engine application.
Not Yet Reviewed
$20.99
COMP designed their XD-A adjustable pushrods with a top section that slides 2 in. inside a wider bottom section, with one or two shims captured in-between. These COMP Cams XD-A pushrod shims allow the pushrods to be adjusted over a range of 0.172 in. in 0.004 in. increments. Order the shim thickness and quantity needed.
Not Yet Reviewed
$30.95
Summit Racing™ valve locks are available to complete your rebuild or upgrade. These top-quality valve locks are machined from hardened stamped steel to deliver the strength and quality you need for optimal valvetrain performance.
( 2 )
$23.99
Hold your cam in place using one of these Dart camshaft retainer plates. They're machined from quality materials and include mounting hardware for a secure installation. For decades, the mechanical masterminds at Dart have produced top-of-the-line components for engine builders and winning race teams. These camshaft retainer plates are another example of their CNC-machined excellence and attention to every detail of your vehicle.
( 5 )
$22.43
Edelbrock valve stem locks are made from top-quality steel, black-oxided for maximum strength. Get durable performance from heat-treated, machined (HTM) 7 degree valve stem locks designed for use with Edelbrock retainers.
( 6 )
$58.95
Keep your cam operating correctly with Manley camshaft thrust bearings. They are made from top-quality materials and are offered for all Manley timing chain and gear sets.
( 2 )
$23.40
On Sale
Looking for an easy way to advance or retard your cam? Look no further than these bushing sets from Mr. Gasket. Use the bushings to advance the cam for more low-end torque and mid-range horsepower, or reduce excessive low-end torque and increase top-end horsepower by retarding the cam. These sets include four offset bushings and one zero degree bushing to return your timing back to stock.
Not Yet Reviewed
$48.61
$26.74
COMP Cams camshaft bolts are designed to prevent breakage. They are rated at 170,000 psi and are available for most popular applications. These bolts are the perfect items to top-off any camshaft installation.
( 7 )
$36.95
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
( 272 )
$22.95
—
$47.95
PAC Racing specialty and class specific valve springs are perfect for getting the final parts of your valvetrain dialed in and ready to run. Each valve spring is manufactured from the highest quality materials and precision-machined for an ideal fit on each application. They're available in intake drag and exhaust drag models. Order the style and specs preferred for your application.
( 1 )
$25.11
PAC Racing RPM Series valve springs were developed using all of the latest advancements from Circle Track and drag racing successes. This valuable, real-life research has been applied to new designs, which allow for performance increases that exceed all demands. RPM springs are made from quality materials and are available in different diameters and pressures to suit your specific camshaft profile.
( 8 )
$24.71
Valve springs compress and rebound hundreds of times a second. Make sure your next set of valve springs are built to last—and built to win! Trick Flow by PAC Racing beehive valve springs allow you to drop in a more aggressive cam without machining your spring seats (most applications). PAC springs are CNC-coiled from high-tensile-strength, extra-durable Pacaloy™ chrome-silicon steel and double shot-peened beyond Aerospace Material Specifications (AMS) reliability standards.
( 18 )
$49.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
