Availability
Showing In Stock Items. Show All 48 Items.
Ford Performance Parts guys live, eat, and sleep Ford. Their camshafts are designed for everything from mildly modified street rods to full-out drag racers. All Ford Performance Parts camshafts are designed for more power; with either improved low-to-mid rpm torque, or mid-to-high rpm horsepower. They're available in many different durations and valve lifts, in your choice of hydraulic, solid, or hydraulic roller lifter configurations. Depending on application, features may include: * More lift and duration * Available to work with stock pistons * No valve spring change required for some applications * Offered in grinds that provide noticeable power improvements with a lumpy idle while maintaining good drivability with manual transmissions * Also available as true street-strip camshafts that work best with manual transmissions or higher stall speed torque converters and high numerical rear-end gears * Offered in versions that work well with carburetors or mass air fuel injection
( 80 )
$1,694.99
Musclecar sound is back and nastier than ever with these Thumpr retrofit hydraulic roller cam and lifter kits from COMP Cams! These cams feature a thumping high performance idle and provide significant horsepower and torque increases. Specially engineered profiles are offered for each unique engine, providing the perfect combination of an early intake valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize your engine's nasty-idling characteristics without negatively impacting streetability. These kits include high-quality matched lifters for unbeatable performance, durability, and ease of installation.
( 22 )
$1,545.95
—
$1,745.95
COMP Cams HRT Max Power Master camshaft kits take the guesswork out of choosing the right valvetrain-upgrade package to achieve your desired performance with your Dodge Gen III Hemi. These Max Power kits feature the "low shock technology" of COMP's HRT camshafts with lobe profiles designed to maximize horsepower and improve stability at higher rpms. The profiles are also easier on valve springs, enhancing durability and reducing load loss. By dyno testing with many combinations of valvetrain components, COMP Cams' engineers have created these more complete, perfectly matched engine camshaft packages for your Hemi application in three different stages of performance. COMP HRT Max Power MK-kits include: * HRT Cam * Lifters * Pushrods * Conical or Beehive springs * Steel retainers * Locks * Spring seats * Valve seals * Phase limiter (VVT Hemi kits only)
( 5 )
$1,644.95
—
$1,839.95
COMP Cams Xtreme Energy retrofit cam and lifter kits are built to take advantage of the latest cam technology, to provide maximum performance. Whether your use is off-roading, towing, or street performance, there is an Xtreme Energy kit available for you. By using an aggressive lobe profile, these kits provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum.
( 41 )
$1,545.95
—
$1,676.95
Make some noise with one of these Edelbrock Rollin' Thunder hydraulic roller cam, lifter, and pushrod kits. They feature a hydraulic roller camshaft and improved hydraulic roller lifters that have more aggressive profiles than conventional cams without excessive valve overlap. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about part compatibility with the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits, and you can be sure that all of the combinations will perform. Recommended for high performance street and strip use, the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits work best from 1,500 to 6,500 rpm and they maintain good vacuum at idle.
( 7 )
$1,583.95
—
$1,645.95
COMP Cams Magnum retrofit cam and lifter kits are designed for everyone from the serious street performance enthusiast to the all-out competition drag racer. Whether you're driving a street rod, a show car with power accessories, a super gas, or super competition car on alcohol, COMP Cams kits will fit your engine's needs.
( 10 )
$1,545.95
Designed specifically for high performance street and race engines, COMP Cams Ultra Gold ARC Series aluminum rocker arms are precision CNC-machined to strict tolerances. They incorporate modern technology and design features to create the most advanced aluminum rocker arms available. Proven to withstand extremely aggressive spring pressure, the COMP Cams Ultra Gold ARC Series aluminum rocker arms use their CNC-machined aluminum design for high quality and the ultimate in ratio accuracy.
( 112 )
$1,626.95
COMP Cams Xtreme XE-R modular 4-valve camshafts are specifically created for high-demanding, overhead-camshaft engine configurations. They are built to take advantage of the latest cam technology, to provide maximum performance.
( 2 )
$1,905.95
COMP Cams XE-R supercharged and nitrous series modular 4-valve camshafts are designed for everyone from the serious street performance enthusiast to the all-out competition drag racer. XE-R supercharged and nitrous series camshafts from COMP Cams are available in a variety of mild-to-aggressive styles. They work with your supercharger or nitrous system to help provide the most power possible.
( 2 )
$1,905.95
On Sale
COMP Cams Xtreme RPM Series modular 4-valve camshafts have been designed to increase horsepower and extend the rpm range of your engine. From stock replacements to ultimate performance, there is an Xtreme RPM cam to meet your performance goals.
Not Yet Reviewed
$1,905.95
$1,524.76
—
$1,905.95
COMP Cams Magnum solid roller cam and lifter kits are designed for everyone from the serious street performance enthusiast to the all-out competition drag racer. Whether you're driving a street rod, show car with power accessories, a super gas, or a super competition car on alcohol, one of these kits will fit your engine's needs .
( 3 )
$1,546.95
S&S Cycle Late Twin Cam Easy Start chain drive cam chest upgrade kits contain everything needed to replace it all! Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. Easy Start kits allow the stock starter to start any engine regardless of compression ratio! Order the kit recommended for your particular Harley-Davidson© street bike. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Quickee pushrods * Pushrod tubes * Easy Atart chain drive camshafts * Inner camshaft bearings * All necessary gaskets, O-rings, and hardware
Not Yet Reviewed
$1,955.66
COMP Cams Xtreme Energy cam and lifter kits are built to take advantage of the latest cam technology and provide maximum performance. Whether your use is off-roading, towing, or street performance, there are Xtreme Energy options available for you. By using an aggressive lobe profile, they provide better throttle response and more top-end horsepower than equivalent kits from other manufacturers, while delivering increased engine vacuum. Order the model designed for your vehicle and engine application.
( 387 )
$1,515.95
—
$1,644.95
Jesel Sportsman tie-bar roller lifters offer Jesel quality and durability at a lower cost. From mild drag engines, street/strip builds, pleasure boats to circle track, these lifters will give you the bulletproof performance you are looking for. Sportsman lifters have polished 8620 heat-treated bodies and are assembled with bronze bushing cam rollers. They also share the same roller, axle, tie-bar, and hardware found in Jesel's Pro Series line. The bronze bushings used have been tested for durability through hundreds of torturous dyno pulls and over a million cycles on Jesel's in-house Spintron. Lifters are available for select OE and aftermarket applications with a range of lifter body diameters from .842 in. to .905 in. with either offset or on-center pushrod seats. Choose the proper fit for your application. Features: * Heat-treated polished 8620 bodies * .842 in., .875 in., and .905 in. diameter bodies * Heat-treated stainless steel tie-bars * Pressurized oiling to the axle assembly ensures adequate oil supply * Heat-treated and polished tool steel roller
Not Yet Reviewed
$1,775.00
On Sale
COMP Cams Thumpr NSR Ford Coyote 5.0 modular 4V camshafts present big power gains, along with the distinctive Thumpr idle lope—and you don't need to upgrade the valve springs. Ford 5.0L modular 4-valve V8 engines have become hugely popular, so how do you improve upon already great performance? With a camshaft from the COMP Cams family of Thumpr NSR camshafts! Choose the cam model (Thumpr or Mutha' Thumpr) designed for your vehicle and engine application. Features include: * Brings legendary Thumpr sound to the 5.0 Coyote * Optimized lobe profiles for increased airflow and exhaust efficiency * Big performance gains in mid- to upper-rpm range * Valve spring upgrade not required * One-piece billet steel construction * Compatible with N/A and supercharged applications
Not Yet Reviewed
$2,046.95
$1,637.56
—
$2,046.95
S&S Cycle Late Twin cam chain drive cam chest upgrade kits contain everything needed to replace it all! Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. They're available for a variety of Harley-Davidson© street bikes from 2006 and up. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Quickee pushrods * Pushrod tubes * Chain drive camshafts * Inner camshaft bearings * All necessary gaskets, O-rings, and hardware
Not Yet Reviewed
$1,854.86
COMP Cams shaft mount aluminum rocker arms are one of the most cost-effective ways to increase horsepower. These shaft rockers were designed using the latest in computer software and engineering. They center the roller tip over the valve tip at the correct time so that the roller tip is never more than 0.020 in. off-center of the valve tip. At the greatest load point, the roller tip contact is on the center of the valve. At valve closing, the roller tip contact is slightly behind the valve centerline. When the valve is at full open, the tip contact is slightly behind the centerline of the valve. The results are more horsepower and better performance.
( 1 )
$1,583.95
—
$2,171.95
COMP Cams Stage 2 LST Master camshaft packages for GM LS applications take the guesswork out of choosing the right valve train upgrade package for your specific engine and desired performance. The "Low Shock Technology" behind COMP Cams LST camshaft packages features lobe profiles designed to maximize horsepower, while improving stability at higher rpm. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. By Spintron and dyno testing these new profiles with many combinations of valve train components, COMP Cams engineers have created valve train packages that are perfectly matched for maximum horsepower and dependability in all popular LS applications with varying modifications. Stage 2 LST kits commonly add 90+ hp, depending on application. Stage 2 LST Master camshaft packages include: * COMP Cams LST camshaft * Lifters * Timing gear set or phaser limiter (depending on application) * Pushrods * Valve springs * Retainers * Valve locks * Spring seats * Valve seats
( 1 )
$1,784.95
S&S Cycle Milwaukee 8 gear drive cam chest kits include everything necessary to convert to gear drive for improved cam timing accuracy and eliminate the stock cam chain tensioner. All parts in each kit are matched to ensure superior quality, fit, finish and performance. Each kit includes necessary gaskets, components, and hardware required for a complete installation. S&S gear drive kits are available for water-cooled and oil-cooled motorcycle models. Select the kit designed for your bike. Features of Milwaukee 8 gear drive cam chest kits: * Oil pump and cam plate are precision-machined from billet aluminum with a blue anodized finish * Passage plugs are removable for servicing * Independent scavenge sections for the flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam helps stop debris from entering oil pump * Increased oil flow capacity on both the feed and scavenge sides * Adjustable pressure relief valve is adjustable with the unit installed in the engine * S&S Quickee Pushrods with chrome or gloss black pushrod tubes * S&S premium tappets—hand assembled to exacting tolerances; reduced valve train noise from start up to shut down * Billet aluminum tappet cuffs have a hard-anodized black coating and are stronger than stock to eliminate distortion and improve tappet stability in high-lift situations * Outer drive gears included * 465 Torque cam kits are the ideal choice for Touring bike applications * 475 kits are bolt-in cams that can produce up to 100 horsepower * 540 kits are designed to add even more stump pulling torque to your big bore M8, for those that keep the revs below 6,000 rpm—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift * 550 kits are for use with large displacement engines—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift
Not Yet Reviewed
$1,599.95
—
$1,815.95
Upgrade your entire cam chest with S&S Cycle Milwaukee 8 chain drive cam chest kits! The parts in each kit are matched to ensure superior quality, fit, finish, and performance, and will include the necessary gaskets, components, and hardware required for a complete installation. S&S Cycle chain drive kits are available for water-cooled and oil-cooled motorcycle models. Select the kit designed to fit your bike. Features of Milwaukee 8 chain drive cam chest kits: * Oil pump and cam plate are precision-machined from billet aluminum with a blue anodized finish * Passage plugs are removable for servicing * Independent scavenge sections for the flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam helps stop debris from entering oil pump * Increased oil flow capacity on both the feed and scavenge sides * Adjustable pressure relief valve is adjustable with the unit installed in the engine * S&S Quickee pushrods with chrome or gloss black pushrod tubes * S&S premium tappets—hand assembled to exacting tolerances; reduced valve train noise from start up to shut down * Billet aluminum tappet cuffs have a hard-anodized black coating and are stronger than stock to eliminate distortion and improves tappet stability in high-lift situations * Precision machined billet aluminum cam chain tensioner * 465 Torque cam kits are the ideal choice for Touring bike applications * 475 kits are bolt-in cams that can produce up to 100 horsepower * 540 kits are designed to add even more stump pulling torque to your big bore M8, for those that keep the revs below 6,000 rpm—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift * 550 kits are for use with large displacement engines—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift
Not Yet Reviewed
$1,580.95
—
$1,621.95
S&S Cycle early Twin Cam chain drive cam chest replacement kits are designed to upgrade your early 1999-2006 Twin Cam to 2007-16 style camshafts and oil pump. Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. Order the kit recommended for your specific Harley-Davidson© street bike. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Inner and outer camshaft bearings * Quickee pushrods * Pushrod tubes * Available with or without chain drive camshafts * All necessary gaskets, O-rings, and hardware
Not Yet Reviewed
$1,854.86
COMP Cams XFI VSR Ford 5.0 Modular 4V camshafts offer billet steel strength and performance for maximum power on your supercharged/turbocharged street/strip application. These XFI Series, valve spring required camshafts are specifically engineered and ready to unlock the potential power of your Ford Coyote 5.0L DOHC modular 4V engine. They are available in two stages of performance. Features: * Stage 1: Optimized with higher lift for specific spring kits, allowing more rpm and added exhaust for forced induction * Stage 2: Very close to a competitive NHRA Factory Shootout or race turbo grind, but mild enough for limited street use
Not Yet Reviewed
$2,046.95
COMP Cams Stage 2 LST camshaft packages for GM LS applications take the guesswork out of choosing the right valve train upgrade package for your specific engine and desired performance. The "Low Shock Technology" behind COMP Cams LST camshaft packages features lobe profiles designed to maximize horsepower, while improving stability at higher rpm. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. By Spintron and dyno testing these new profiles with many combinations of valve train components, COMP Cams engineers have created valve train packages that are perfectly matched for maximum horsepower and dependability in all popular LS applications with varying modifications. Stage 2 LST kits commonly add 90+ hp, depending on application. Stage 2 LST camshaft packages include: * COMP Cams LST Camshaft * Pushrods * Valve Springs * Retainers * Valve Locks * Spring Seats * Valve Seats
Not Yet Reviewed
$1,535.95
For the enthusiast who chooses a solid lifter cam, COMP Cams offers the highest quality solid lifters available today. These lifters are manufactured using the tightest tolerances in the industry, ensuring optimum performance. The crown of the lifters is ground to a precise radius for proper break-in and to guarantee long life. The oil-metering band is milled to the correct depth to prevent too much oil from being delivered to the top of the motor, and to prevent horsepower loss. Order the size and quantity needed for your engine application.
( 28 )
$2,029.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
