Availability
Showing In Stock Items. Show All 33 Items.
Summit Bucks
COMP Cams HRT Stage 2 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads.
( 1 )
$1,222.95
—
$1,236.95
COMP Cams HRT Max Power Master camshaft kits take the guesswork out of choosing the right valvetrain-upgrade package to achieve your desired performance with your Dodge Gen III Hemi. These Max Power kits feature the "low shock technology" of COMP's HRT camshafts with lobe profiles designed to maximize horsepower and improve stability at higher rpms. The profiles are also easier on valve springs, enhancing durability and reducing load loss. By dyno testing with many combinations of valvetrain components, COMP Cams' engineers have created these more complete, perfectly matched engine camshaft packages for your Hemi application in three different stages of performance. COMP HRT Max Power MK-kits include: * HRT Cam * Lifters * Pushrods * Conical or Beehive springs * Steel retainers * Locks * Spring seats * Valve seals * Phase limiter (VVT Hemi kits only)
( 4 )
$1,644.95
Summit Bucks
COMP Cams HRT Stage 1 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. COMP Cams HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads. All HRT Stage 1 camshafts do not require upgraded valve springs.
( 1 )
$1,236.95
Red-Zone EZ-Roll Max roller lifters are needle-free, solving the age-old dilemma of needle bearing overload. The extreme loading demands of all-out racing require advance load distribution. Ideal for the most extreme loading environments, these lifters carry far greater loads. Their needle-less roller bearing construction and greater surface area to load distribution footprint deliver a solid 350 percent higher load rating! Isky Red-Zone EZ-Roll Max lifters are an ultra-low friction, high-tech alternative to needle bearing lifters!
( 3 )
$1,235.99
—
$1,312.99
The COMP Cams XFI SPR Ford 4.6L/5.4L modular 3V (Springs & Phaser Mods Required) camshafts are the best way to achieve the most power and torque increases possible with the popular Ford Modular 3V engine. These designs are the next step up from the COMP Cams VSR (Valve Springs Required) cams. When compared to the VSR cams, the SPR cams offer additional mid-rpm power increases as well as substantial power gains in the higher rpm ranges. In addition to increases in horsepower, you can also expect another 800-1000 rpm of useable engine speed and an awesome sounding idle lope to match. To achieve this extra level of performance, lobe profiles and timing events were specifically designed to work with the factory variable cam timing (VCT) system cam phasers for all 2005 and newer Ford Modular 3V engines. These cam phasers were modified with the required COMP Cams Cam Phaser Limiter kit to restrict their movement to no more than 20 degrees. This simple modification gains additional piston to valve clearance, allowing for much larger cam designs. This results in cams that not only maintain low and mid-range power, but have incredible high rpm performance as well, all while maintaining the benefits of cam phasing. As noted by the COMP Cams engineering staff during extensive dyno testing, these camshafts provided the biggest power and torque improvements of any cam series they've ever tested in the Ford Modular 3V engine.
( 1 )
$1,028.95
COMP Cams HRT Max Power camshaft kits take the guesswork out of choosing the right valvetrain-upgrade package to achieve your desired performance with your Dodge Gen III Hemi. These Max Power kits feature the "low shock technology" of COMP's HRT camshafts with lobe profiles designed to maximize horsepower and improve stability at higher rpms. The profiles are also easier on valve springs, enhancing durability and reducing load loss. By dyno testing with many combinations of valvetrain components, COMP Cams' engineers have created perfectly matched engine camshaft packages for your Hemi application in three different stages of performance. COMP HRT Max Power CK-kits include: * HRT Cam * Pushrods * Conical or Beehive springs * Steel retainers * Locks * Spring seats * Valve seals * Phase limiter (VVT Hemi kits only)
Not Yet Reviewed
$1,222.95
COMP Cams Stage 2 LST camshaft packages for GM LS applications take the guesswork out of choosing the right valve train upgrade package for your specific engine and desired performance. The "Low Shock Technology" behind COMP Cams LST camshaft packages features lobe profiles designed to maximize horsepower, while improving stability at higher rpm. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. By Spintron and dyno testing these new profiles with many combinations of valve train components, COMP Cams engineers have created valve train packages that are perfectly matched for maximum horsepower and dependability in all popular LS applications with varying modifications. Stage 2 LST kits commonly add 90+ hp, depending on application. Stage 2 LST camshaft packages include: * COMP Cams LST Camshaft * Pushrods * Valve Springs * Retainers * Valve Locks * Spring Seats * Valve Seats
Not Yet Reviewed
$1,535.95
Get the most out of your high performance engine with these Isky Red-Zone EZ-Roll roller lifters. Your lifters have to take a lot of abuse between radical cam profiles and serious spring pressures, so going with anything less than the toughest available would be a mistake. These Isky Red-Zone EZ-Roll lifters are designed from the ground up with the latest technologies to withstand what your all-out performance engine can throw at them. Isky replaced the traditional needle bearings with the tough-wearing, low-friction Epsilon-Z solid bearing raceway that better distributes the forces, resulting in much more even wear. Add the advanced full spectrum three-point oiling system that provides a continuous oil supply to the bearings and you end up with a lifter that will last, even when subjected to opening pressures of up to 750 lbs.! Spend less time rebuilding your engine and more time doing what you love by upgrading to these Isky Red-Zone EZ-Roll roller lifters!
Not Yet Reviewed
$1,342.99
S&S Cycle Early Twin Cam Easy Start gear drive camshaft kits offer more performance for less money, and more time to enjoy riding. The Easy Start kits allow your stock starter to start any engine and most can be used with stock valve springs. Plus, they are designed to greatly improve valve timing accuracy by eliminating timing chain lash. Twin Cam kits include cams with inner gears and installation kits. Installation doesn't take long and S&S offers many choices to meet your engine size and compression ratio. Here's an easier way to increase performance without emptying your wallet--S&S Cycle Early Twin Cam Easy Start gear drive camshaft kits.
Not Yet Reviewed
$1,070.95
Upgrade your entire cam chest with S&S Cycle Milwaukee 8 chain drive cam chest kits! The parts in each kit are matched to ensure superior quality, fit, finish, and performance, and will include the necessary gaskets, components, and hardware required for a complete installation. S&S Cycle chain drive kits are available for water-cooled and oil-cooled motorcycle models. Select the kit designed to fit your bike. Features of Milwaukee 8 chain drive cam chest kits: * Oil pump and cam plate are precision-machined from billet aluminum with a blue anodized finish * Passage plugs are removable for servicing * Independent scavenge sections for the flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam helps stop debris from entering oil pump * Increased oil flow capacity on both the feed and scavenge sides * Adjustable pressure relief valve is adjustable with the unit installed in the engine * S&S Quickee pushrods with chrome or gloss black pushrod tubes * S&S premium tappets—hand assembled to exacting tolerances; reduced valve train noise from start up to shut down * Billet aluminum tappet cuffs have a hard-anodized black coating and are stronger than stock to eliminate distortion and improves tappet stability in high-lift situations * Precision machined billet aluminum cam chain tensioner * 465 Torque cam kits are the ideal choice for Touring bike applications * 475 kits are bolt-in cams that can produce up to 100 horsepower * 540 kits are designed to add even more stump pulling torque to your big bore M8, for those that keep the revs below 6,000 rpm—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift * 550 kits are for use with large displacement engines—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift
Not Yet Reviewed
$1,580.95
S&S Cycle Milwaukee 8 gear drive cam chest kits include everything necessary to convert to gear drive for improved cam timing accuracy and eliminate the stock cam chain tensioner. All parts in each kit are matched to ensure superior quality, fit, finish and performance. Each kit includes necessary gaskets, components, and hardware required for a complete installation. S&S gear drive kits are available for water-cooled and oil-cooled motorcycle models. Select the kit designed for your bike. Features of Milwaukee 8 gear drive cam chest kits: * Oil pump and cam plate are precision-machined from billet aluminum with a blue anodized finish * Passage plugs are removable for servicing * Independent scavenge sections for the flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam helps stop debris from entering oil pump * Increased oil flow capacity on both the feed and scavenge sides * Adjustable pressure relief valve is adjustable with the unit installed in the engine * S&S Quickee Pushrods with chrome or gloss black pushrod tubes * S&S premium tappets—hand assembled to exacting tolerances; reduced valve train noise from start up to shut down * Billet aluminum tappet cuffs have a hard-anodized black coating and are stronger than stock to eliminate distortion and improve tappet stability in high-lift situations * Outer drive gears included * 465 Torque cam kits are the ideal choice for Touring bike applications * 475 kits are bolt-in cams that can produce up to 100 horsepower * 540 kits are designed to add even more stump pulling torque to your big bore M8, for those that keep the revs below 6,000 rpm—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift * 550 kits are for use with large displacement engines—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift
Not Yet Reviewed
$1,599.95
Get more for your dollar with Howards Cams Retro-Fit hydraulic roller camshaft and lifter kits. You'll get more lift and power for less money with these street performance grinds. They're perfect for those wanting to upgrade to hydraulic roller cams. Howards manufactures their cams using the highest grade race-quality cores and precision-grinds their cams to provide the quality and performance that you want at a reasonable price. They've matched these hydraulic cams with a perfect set of their premium lifters. Overhaul your valvetrain for mild to wild street performance with Howards Cams Retro-Fit hydraulic roller camshaft and lifter kits.
( 68 )
$1,034.99
—
$1,049.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
