Availability
Showing In Stock Items. Show All 67 Items.
S&S Cycle Late Twin Cam Easy Start chain drive cam chest upgrade kits contain everything needed to replace it all! Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. Easy Start kits allow the stock starter to start any engine regardless of compression ratio! Order the kit recommended for your particular Harley-Davidson© street bike. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Quickee pushrods * Pushrod tubes * Easy Atart chain drive camshafts * Inner camshaft bearings * All necessary gaskets, O-rings, and hardware
Not Yet Reviewed
$1,955.66
—
$2,529.95
S&S Cycle precision tappets are high performance replacements for S&S Cycle's previous standard and premium lifters for M8, Twin Cams, and late Sportster applications. Each precision tappet is hand assembled to exacting tolerances and designed for quiet operation and rapid pump up. Features and benefits: * Reduced valve train noise from start-up to shut down * Close tolerances for low leak-down rates * Fast pump up and superior high-rpm performance
Not Yet Reviewed
$251.96
Easily installed, easily removed--S&S Cycle Quickee adjustable pushrods are designed for a simple, trouble-free installation that does not require removal of the gas tank, rocker assemblies, or even the rocker box cover! Innovative Quickees feature threaded adjusters that screw into the pushrods until the threads disengage and the adjuster simply slides into the pushrods, making your installation or removal easy. Then, once the pushrods are installed and adjusted, the locknut keeps the adjuster from moving. They will work with stock and aftermarket cams, as well as stock pushrod covers. S&S proven performance makes life easier with their Quickee adjustable pushrods.
( 1 )
$188.96
—
$303.26
COMP Cams twin cam Thumpr camshafts are designed as a serious performance upgrade with hard-hitting sound! They feature an aggressive design that provide a thumping exhaust note and they provide a great performance upgrade to any 103 cu. in. and larger twin cam engine. The cams feature a sophisticated "Endurance Ramp" lobe design that makes great power but is easy on the tappets and valve train for long life. They feature a wide power band and pull great up to 5,400 to 6,400 rpm dependent upon the camshafts selected, and engine combination. The cams are made from 8620 billet steel and have been shown to make greater gains in power, acceleration, and throttle response when tested with larger throttle bodies. Put more power to the ground, and make some noise with Comp Cams twin cam Thumpr camshafts.
( 1 )
$243.95
COMP Cams V-Thunder performance replacement lifters feature a rigid nodular cast iron body with a 52100 bearing, axle, and wheel assembly for strength. They utilize an advanced ultra-high flow metering system that allows more oil movement through the engine to aid in cooling. Each lifter is precision I.D. ground, matched with a graded piston, and features a high-performance retaining ring. Keep your valvetrain stable with COMP Cams V-Thunder performance replacement lifters.
Not Yet Reviewed
$213.95
COMP Cams twin cam camshafts are designed as a performance upgrade, that offer more power with long valve train life. These camshafts provide a great performance upgrade to any 103 cubic inch and larger twin cam engine. The cams feature a sophisticated "Endurance Ramp" lobe design that makes big power but is easy on the tappets and valve train for long life. They feature a wide power band and pull great up to 5200 – 6200 RPM dependent upon the camshafts selected, and engine combination. The cams are made from 8620 billet steel for added strength and durability. Upgrade your camchest by installing a set of Comp twin cam camshafts.
( 5 )
$243.95
S&S Cycle standard adjustable pushrods help to assure consistent valvetrain operation under all conditions. The pushrods are made from rigid chromoly steel tubing and offer a simple, trouble-free installation. You can purchase just the pushrods or as a set with pushrod covers, O-rings, and cover keepers. Replace the stock, non-adjustable pushrods in your stock or high performance application with S&S Cycle standard adjustable pushrods, available for a wide range of Harley-Davidson® bikes from 1984 and up.
( 1 )
$139.46
—
$279.95
S&S Cycle standard forged rocker arms are designed for superior strength and to eliminate the failure-prone stress areas found in other rockers. These replacement arms are forged from 8620 steel, heat-treated, and then shot-peened for additional strength. They feature 3/4 in. long bronze bushings, compared to the more common 1/2 in. long bushings or needle bearings. S&S Cycle roller arms are available in the stock 1.625:1 ratio and 1.725:1 ratio. Order the set recommended for your bike model.
Not Yet Reviewed
$294.26
COMP Cams Evolution magnum hydraulic roller camshafts are high performance camshafts designed for your Harley-Davidson®. They are constructed from superior-quality materials to bring the best possible performance to your ride. If you're looking to upgrade your Harley®, COMP Cams Evolution magnum hydraulic roller camshafts are must-haves.
Not Yet Reviewed
$205.95
S&S Cycle Late Twin cam chain drive cam chest upgrade kits contain everything needed to replace it all! Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. They're available for a variety of Harley-Davidson© street bikes from 2006 and up. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Quickee pushrods * Pushrod tubes * Chain drive camshafts * Inner camshaft bearings * All necessary gaskets, O-rings, and hardware
Not Yet Reviewed
$1,854.86
Simplify your valvetrain assembly! COMP Cams high performance valve spring kits have everything that you need for a complete valve spring assembly. Springs and retainers are included, along with complete instructions for a worry-free installation.
( 32 )
$90.95
—
$195.95
S&S Cycle offers Street Performance .585 in. valve spring kits to upgrade your bike's performance—so you don't have just another "me too" motorcycle. Order the valve spring kit designed for your make and model. Features and specifications: * Available for fitment on a variety of Harley-Davidson® and Buell models * Kit contains springs, top and bottom collars, keepers, and shims * Accommodates camshaft lift to 0.585 inches * Suitable for high performance applications * Coil springs reduce the risk of valve float
Not Yet Reviewed
$147.56
Feuling supplies the best bearings available from Koyo Bearings USA LLC, created following Koyo's acquisition of Timken's needle roller bearings business. Feuling Parts inner camshaft bearings are heavy-duty, compact, full complement needle roller bearings designed to provide increased radial load carrying capacity by maximizing the number of rollers in the bearing. Feuling Parts inner cam bearings readily accept the higher loads and demands of performance engines.
( 2 )
$33.95
—
$44.95
S&S Cycle Early Twin Cam chain drive camshaft kits are an affordable way to increase performance. These kits allow you to reuse many stock cam drive components, saving you money on parts. Complete kits include the cams, gear cover gasket, cam bearings, and instructions. Go with the less expense and more performance of S&S Cycle Early Twin Cam chain drive camshaft kits.
Not Yet Reviewed
$377.06
—
$386.96
For stock or high performance, S&S hydraulic tappets offer significant design improvements to withstand the forces, reduce the stress, and solve the possibility of oil starvation. S&S hydraulic tappets feature larger inner bearing races, an improved inner race-roller design, a redesigned and stronger plunger assembly, and revised metering devices for precise oil delivery control. Each lifter body and plunger assembly is hand-fit and then pressure-tested to insure correct operation. Choose the better features of S&S hydraulic tappets for better performance.
Not Yet Reviewed
$343.76
—
$368.96
S&S Cycle rocker arm shafts provide your American motorcycle with components that are produced from chromoly steel and duplicate the originals for a perfect fit and provide the expected performance. They are available in sets of 4 or sold individually. Replace your rocker arms with quality S&S Cycle rocker arm shafts.
( 1 )
$45.86
Feuling Parts HP+ lifters are a great performance upgrade for your motorcycle--as the name implies, they're "Horsepower Plus!" Hydraulic roller lifters provide optimized (and cooler) oil flow to top-end valves, springs, rockers, shafts, and valve guides. The rollers reduce friction between the lifters and camshaft, extending the life of your valvetrain gear. HP+ lifters are CNC-machined, precision-ground, drop-in replacements for your stock lifters. They've been dyno-developed and track-tested for use with the Feuling oil pump or comparable high-volume models. HP+ lifters are available to fit a variety of bike makes and models, including Buell and Harley-Davidson®.
Not Yet Reviewed
$203.95
—
$284.95
Feuling Parts camplate PSI testers are a must for any Harley-Davidson® Twin Cam engine builder. Bench-test each camplate before installation, cycle the pressure relief valve—testing the operation and ensuring that the valve moves freely, and seats and seals each time. Any leakage at the relief valve will reduce oil pressure. These camplate support tools let you know what PSI the relief valve opens; the spring tension can be adjusted to achieve the desired pop off PSI. Testers include: * Air regulator * 0-100 psi pressure gauge * Gaskets and needed hardware * Tool fits all Twin Cam engine camplates
Not Yet Reviewed
$202.95
Kibblewhite is dedicated to providing the best lightweight racing valve spring kits available. The folks at Kibblewhite have years of experience building the finest valvetrain products, and that experience has culminated in these lightweight valve springs. Each spring starts life as the finest quality super-clean, chrome-silicon wire that is wound to the most exacting standards. After the spring is wound, it goes through a rigidly controlled heat treatment, stress relief, and shot-peening process that ensures the longest lasting and strongest springs possible. These springs are perfect for today's high-revving motors, whether you are on the race track or the trail. Upgrade to these Kibblewhite lightweight racing valve spring kits today and stop worrying about when one of your stock springs is going to fail you.
Not Yet Reviewed
$142.97
Kibblewhite Black Diamond valves are CNC-machined from one-piece forgings of EV8 stainless steel, impregnated by a special German process to a depth of .002 in. with a surface buildup of .0002 in. This proprietary, multi-stage process reduces friction and provides superior resistance to wear and corrosion over traditional chrome and nickel electrolysis plating processes. These valves go through an oxiding and polishing process that creates an extremely smooth surface finish that's easy on valve guides, and there's nothing to flake off and get trapped between the valve and guide to cause seizure or wear! Kibblewhite Black Diamond valves are designed using Finite Element Analysis software, with profiles tested on Kibblewhite's computerized flow bench to provide excellent flow characteristics. These strong, reliable, and lightweight valves are your ticket to ultimate valvetrain performance!
Not Yet Reviewed
$29.81
Biker's Choice cam gear thrust washers are an excellent alternative to overpriced and/or hard to find OEM pieces. They meet and/or exceed OEM expectations and are readily available for that rebuild or restoration your V-Twin needs.
Not Yet Reviewed
$32.93
Feuling Parts outer camshaft bearing kits include a ball bearing-style front camshaft bearing and a roller bearing-style rear camshaft bearing with race. Their outer cam bearings readily accept the higher loads and demands of performance engines. Feuling Parts supplies only the best bearings available.
Not Yet Reviewed
$50.95
Kibblewhite developed these high performance ovate wire valve spring kits for to take full advantage of your high performance engine. Ovate wire springs distribute forces and heat more efficiently due to a larger surface area and are ideal for high-lift, bind-free performance due to their lower profile. Kibblewhite springs are wound from super-clean chrome silicon wire that is heat-treated and shot-peened to improve strength, durability, and consistency. These springs are available for a variety of lifts and seat pressures to help you find the perfect set for your project. Take full advantage of your ride's performance potential with these Kibblewhite high performance ovate wire valve springs.
Not Yet Reviewed
$184.99
Summit Bucks
S&S Cycle Late Twin Cam Easy Start chain drive camshaft kits offer more performance for less money and more time to enjoy riding. These S&S camshaft kits allow your stock starter to start any engine. Plus, some kits reuse stock components and can be used with stock valve springs. Most Easy Start kits include the cams, gear cover gasket, cam bearings, and instructions. Installation doesn't take long and S&S offers many choices to meet your engine size and compression ratio. Here's an easier way to increase performance without emptying your wallet--S&S Cycle Late Twin Cam Easy Start chain drive camshaft kits.
Not Yet Reviewed
$485.96
—
$486.86
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
