Availability
Showing In Stock Items. Show All 37 Items.
COMP Cams twin cam Thumpr camshafts are designed as a serious performance upgrade with hard-hitting sound! They feature an aggressive design that provide a thumping exhaust note and they provide a great performance upgrade to any 103 cu. in. and larger twin cam engine. The cams feature a sophisticated "Endurance Ramp" lobe design that makes great power but is easy on the tappets and valve train for long life. They feature a wide power band and pull great up to 5,400 to 6,400 rpm dependent upon the camshafts selected, and engine combination. The cams are made from 8620 billet steel and have been shown to make greater gains in power, acceleration, and throttle response when tested with larger throttle bodies. Put more power to the ground, and make some noise with Comp Cams twin cam Thumpr camshafts.
( 1 )
$243.95
S&S Cycle precision tappets are high performance replacements for S&S Cycle's previous standard and premium lifters for M8, Twin Cams, and late Sportster applications. Each precision tappet is hand assembled to exacting tolerances and designed for quiet operation and rapid pump up. Features and benefits: * Reduced valve train noise from start-up to shut down * Close tolerances for low leak-down rates * Fast pump up and superior high-rpm performance
Not Yet Reviewed
$251.96
Easily installed, easily removed--S&S Cycle Quickee adjustable pushrods are designed for a simple, trouble-free installation that does not require removal of the gas tank, rocker assemblies, or even the rocker box cover! Innovative Quickees feature threaded adjusters that screw into the pushrods until the threads disengage and the adjuster simply slides into the pushrods, making your installation or removal easy. Then, once the pushrods are installed and adjusted, the locknut keeps the adjuster from moving. They will work with stock and aftermarket cams, as well as stock pushrod covers. S&S proven performance makes life easier with their Quickee adjustable pushrods.
( 1 )
$188.96
—
$278.96
S&S Cycle Late Twin Cam Easy Start chain drive cam chest upgrade kits contain everything needed to replace it all! Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. Easy Start kits allow the stock starter to start any engine regardless of compression ratio! Order the kit recommended for your particular Harley-Davidson© street bike. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Quickee pushrods * Pushrod tubes * Easy Atart chain drive camshafts * Inner camshaft bearings * All necessary gaskets, O-rings, and hardware
Not Yet Reviewed
$1,955.66
—
$2,529.95
COMP Cams twin cam camshafts are designed as a performance upgrade, that offer more power with long valve train life. These camshafts provide a great performance upgrade to any 103 cubic inch and larger twin cam engine. The cams feature a sophisticated "Endurance Ramp" lobe design that makes big power but is easy on the tappets and valve train for long life. They feature a wide power band and pull great up to 5200 – 6200 RPM dependent upon the camshafts selected, and engine combination. The cams are made from 8620 billet steel for added strength and durability. Upgrade your camchest by installing a set of Comp twin cam camshafts.
( 5 )
$243.95
S&S Cycle Late Twin cam chain drive cam chest upgrade kits contain everything needed to replace it all! Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. They're available for a variety of Harley-Davidson© street bikes from 2006 and up. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Quickee pushrods * Pushrod tubes * Chain drive camshafts * Inner camshaft bearings * All necessary gaskets, O-rings, and hardware
Not Yet Reviewed
$1,854.86
S&S Cycle standard forged rocker arms are designed for superior strength and to eliminate the failure-prone stress areas found in other rockers. These replacement arms are forged from 8620 steel, heat-treated, and then shot-peened for additional strength. They feature 3/4 in. long bronze bushings, compared to the more common 1/2 in. long bushings or needle bearings. S&S Cycle roller arms are available in the stock 1.625:1 ratio and 1.725:1 ratio. Order the set recommended for your bike model.
Not Yet Reviewed
$294.26
Simplify your valvetrain assembly! COMP Cams high performance valve spring kits have everything that you need for a complete valve spring assembly. Springs and retainers are included, along with complete instructions for a worry-free installation.
( 32 )
$145.95
Feuling supplies the best bearings available from Koyo Bearings USA LLC, created following Koyo's acquisition of Timken's needle roller bearings business. Feuling Parts inner camshaft bearings are heavy-duty, compact, full complement needle roller bearings designed to provide increased radial load carrying capacity by maximizing the number of rollers in the bearing. Feuling Parts inner cam bearings readily accept the higher loads and demands of performance engines.
( 2 )
$44.95
S&S Cycle rocker arm shafts provide your American motorcycle with components that are produced from chromoly steel and duplicate the originals for a perfect fit and provide the expected performance. They are available in sets of 4 or sold individually. Replace your rocker arms with quality S&S Cycle rocker arm shafts.
( 1 )
$45.86
Feuling Parts HP+ lifters are a great performance upgrade for your motorcycle--as the name implies, they're "Horsepower Plus!" Hydraulic roller lifters provide optimized (and cooler) oil flow to top-end valves, springs, rockers, shafts, and valve guides. The rollers reduce friction between the lifters and camshaft, extending the life of your valvetrain gear. HP+ lifters are CNC-machined, precision-ground, drop-in replacements for your stock lifters. They've been dyno-developed and track-tested for use with the Feuling oil pump or comparable high-volume models. HP+ lifters are available to fit a variety of bike makes and models, including Buell and Harley-Davidson®.
Not Yet Reviewed
$203.95
Feuling Parts camplate PSI testers are a must for any Harley-Davidson® Twin Cam engine builder. Bench-test each camplate before installation, cycle the pressure relief valve—testing the operation and ensuring that the valve moves freely, and seats and seals each time. Any leakage at the relief valve will reduce oil pressure. These camplate support tools let you know what PSI the relief valve opens; the spring tension can be adjusted to achieve the desired pop off PSI. Testers include: * Air regulator * 0-100 psi pressure gauge * Gaskets and needed hardware * Tool fits all Twin Cam engine camplates
Not Yet Reviewed
$202.95
S&S Cycle Late Twin Cam Easy Start chain drive camshaft kits offer more performance for less money and more time to enjoy riding. These S&S camshaft kits allow your stock starter to start any engine. Plus, some kits reuse stock components and can be used with stock valve springs. Most Easy Start kits include the cams, gear cover gasket, cam bearings, and instructions. Installation doesn't take long and S&S offers many choices to meet your engine size and compression ratio. Here's an easier way to increase performance without emptying your wallet--S&S Cycle Late Twin Cam Easy Start chain drive camshaft kits.
Not Yet Reviewed
$485.96
—
$486.86
Feuling Parts Race Series lifters are a high performance upgrade for your motorcycle. Full-travel hydraulic or solid roller lifters are machined from a steel body for large-lift camshafts in standard or oversized OD applications. They will maintain proper oil flow to the top-end, increasing engine rpm and valvetrain stability, while decreasing valve float. This promotes maximum valve lift, with more horsepower and torque output. A high-volume oil pump is recommended for best results. Race Series lifters are drop-in replacements on both strip and performance street engines. They're available to fit a variety of bike makes and models, including Buell and Harley-Davidson®.
Not Yet Reviewed
$298.95
—
$307.95
Feuling Parts quick-change cam install kits enable you to perform vital engine maintenance on your motorcycle—with all of the necessary parts conveniently gathered in one place. Depending on your specific make and model, these kits include an assortment of gaskets, bearings, bolts, washers, and retaining clips, plus ARP fastener moly paste and Loctite thread compound. Camshaft service isn't so daunting with quick-change kits at your disposal!
Not Yet Reviewed
$96.95
S&S Cycle offers inner cam gears for a variety of Harley-Davidson© street bikes from 2006 and up. This is the gear located on the inside of a camshaft, directly connected to the camshaft itself. It's responsible for transferring rotational motion from the timing belt or chain to the camshaft, allowing it to open and close the engine valves at the correct timing. Essentially, an inner cam gear is the primary gear on the camshaft that engages with the timing system to rotate the camshaft properly. These OE-style replacements are manufactured from factory materials and specifications to ensure proper fitment and long-lasting performance.
Not Yet Reviewed
$152.95
S&S Cycle roller rocker arms were designed for superior strength and to eliminate the failure-prone stress areas found in other rockers. These replacement arms are forged from 8620 steel, heat-treated, and then shot-peened for additional strength. They feature 3/4 in. long bronze bushings, compared to the more common 1/2 in. long bushings or needle bearings. S&S Cycle roller rocker arms are available in 1.500:1 ratio, 1.625:1 ratio and 1.725:1 ratio. Order the set recommended for your bike model.
Not Yet Reviewed
$587.66
S&S Cycle Late Twin Cam chain drive camshaft kits are an affordable way to increase performance. These S&S camshaft kits allow you to reuse many stock cam drive components, saving you money on parts. Complete kits include the cams, gear cover gasket, cam bearings, and instructions. Go with the less expense and more performance of S&S Cycle Twin Cam chain drive camshaft kits.
Not Yet Reviewed
$386.96
S&S Cycle TC3 camshaft support plates are just what the doctor ordered when repairing a damaged engine or installing new camshafts. CNC machined from forged aluminum for excellent strength and dimensional accuracy. They feature bronze pinion shaft bushing in all models and bronze cam bushings in 2007-later style. Select the plate designed for your motorcycle. Note: S&S suggests new S&S oil pumps and chain tensioners be installed with new cam support plates.
Not Yet Reviewed
$395.06
S&S Cycle camshaft installation kits are available for both chain and gear drive motorcycles. Depending on your specific model, your kits can include a gearcover gasket, cam bearings, retaining plate, and instructions. Imagine the headache if you had to research and locate each of these items; S&S Cycle has done the legwork for you! Just find the kit you need, and half of your installation battle is complete!
( 2 )
$46.76
S&S Cycle standard adjustable pushrods help to assure consistent valvetrain operation under all conditions. The pushrods are made from rigid chromoly steel tubing and offer a simple, trouble-free installation. You can purchase just the pushrods or as a set with pushrod covers, O-rings, and cover keepers. Replace the stock, non-adjustable pushrods in your stock or high performance application with S&S Cycle standard adjustable pushrods, available for a wide range of Harley-Davidson® bikes from 1984 and up.
( 1 )
$224.96
—
$279.95
S&S Cycle time-saver adjustable pushrods eliminate the need to disassemble the top end and remove the rocker arms to change pushrods or camshafts, reducing installation time by up to 75 percent. S&S Cycle time-saver adjustable pushrods feature larger 9mm diameter chromoly tubing that provides superior strength and minimizes pushrod flex. The single adjuster end provides pushrod lengths from 9.5 to 11.5 in. for stock height and taller engines. Select the pushrods designed for your motorcycle.
Not Yet Reviewed
$193.46
S&S Cycle offers you superior valve train control for your motorcycle with their cam chain tensioners. They provide a thicker shoe, a larger piston, direct chain oiling, and tighter tolerances for improved stability and longer wear life over the stock cam chain tensioners. Order the S&S cam chain tensioners designed for your bike.
Not Yet Reviewed
$157.46
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
