Availability
Summit Racing™ 12 V electric vacuum pumps utilize a rotary vane style pump with an enlarged diaphragm to ensure maximum suction while remaining nearly dead-quiet and vibration-free. Utilizing a Manifold Absolute Vacuum/Pressure (MAVP) sensor eliminates the need for old-school vacuum switches and relays. This configuration also guarantees an incredibly quick vacuum recovery time, ensuring 17 in. to 23 in. Hg vacuum all the time. The pumps come in four standard configurations: Bare (no outer shell), Black, Chrome, or Gunmetal Gray ABS plastic outer shell. Each kit comes complete with 5 ft. of 3/8 in. supporting vacuum hose, proper wiring harnesses for an easy install, and vibration dampeners—all while maintaining a common mounting hole configuration.
( 271 )
$340.99
—
$370.99
Moroso competition-style vacuum pump V-belt pulleys bolt directly onto OEM, Holley, and other smog pumps used as engine vacuum pumps to improve ring seal. Their deep V-groove design ensures belt retention under all racing conditions. They're machined with six holes to reduce weight, and they use the stock mounting pattern.
( 3 )
$103.99
—
$110.99
Moroso competition-style vacuum pump gilmer drive pulleys bolt directly onto OEM, Holley, and other smog pumps used as engine vacuum pumps to improve ring seal. They're machined from aluminum to reduce weight and use the common 3 x 1.313 in. mounting pattern.
Not Yet Reviewed
$140.99
—
$175.99
These Moroso vacuum pump radius tooth pulleys are designed to work more efficiently and take less power to drive your vacuum pump. They use a .500 in. wide drive belt, and with a wide variety of drive pulley sizes, any drive ratio you may need is achievable. The Moroso vacuum pump radius tooth pulleys fit any 1 in. mandrel with a 1/8 in. keyway slot. They are manufactured from aluminum and then black anodized for protection against corrosion .
( 2 )
$58.99
—
$131.99
CVR Products has the replacement parts needed to keep your vacuum pump operating at peak performance. These vacuum pump bolt-on V-belt pulleys are machined from aluminum, with a beautiful black anodized finish. Order the pulley designed for your specific CVR pump application.
( 1 )
$31.99
Drag Race Solutions 5-blade vacuum pump pulleys are the way to go when sharpening up the look of your engine bay. Designed to fit Moroso-style vacuum pumps, these bolt-on V-belt pulleys are made either from billet aluminum or aluminum and come in three different finishes. Order the model you prefer for your application.
Not Yet Reviewed
$79.99
—
$99.99
Drag Race Solutions 5-blade double cut vacuum pump pulleys are the way to go when sharpening up the look of your engine bay. Designed to fit Moroso-style vacuum pumps, these bolt-on V-belt pulleys are made either from billet aluminum or aluminum and come in three different finishes. Order the model you prefer for your application.
Not Yet Reviewed
$79.99
—
$99.99
Drag Race Solutions 5-blade propeller cut vacuum pump pulleys are the way to go when sharpening up the look of your engine bay. Designed to fit Moroso-style vacuum pumps, these bolt-on V-belt pulleys are made either from billet aluminum or aluminum and come in three different finishes. Order the model you prefer for your application.
Not Yet Reviewed
$84.99
—
$109.99
Drag Race Solutions Full Throttle vacuum pump pulleys are custom CNC-machined billet aluminum pieces with a fresh Full Throttle design. These pulleys fit V-belts, include stainless steel mounting bolts, and are available with a beautiful chrome or black machined finish. DRS Full Throttle pulleys are designed to fit Moroso-style vacuum pumps and will match your Weld Full Throttle racing wheels. Select the finish preferred.
Not Yet Reviewed
$109.99
Drag Race Solutions V-Series vacuum pump pulleys are custom CNC-machined billet aluminum pieces with a fresh design. These pulleys fit V-belts, include stainless steel mounting bolts, and are available with a beautiful chrome or black machined finish. DRS V-Series pulleys are designed to fit Moroso-style vacuum pumps and will match your Weld V-Series racing wheels. Select the finish preferred.
Not Yet Reviewed
$109.99
Drag Race Solutions 3-blade vacuum pump pulleys are the way to go when sharpening up the look of your engine bay. Designed to fit Moroso-style vacuum pumps, these bolt-on V-belt pulleys are made either from billet aluminum or aluminum and come in three different finishes. Order the model you prefer for your application.
Not Yet Reviewed
$79.99
—
$99.99
Peterson Fluid Systems spline drive kits are strong easy to use alternatives to standard mandrels. Precision machined from 6061-T6 billet aluminum and hard coat anodized, these kits eliminate the long crankshaft bolt that can cause issues, and will work with all Peterson spline drive components. They include all hardware to mount to balancer.
Not Yet Reviewed
$191.99
—
$202.99
Moroso drive mandrel spacer kits aid you in pulley alignment for your SBC applications. They maintain the register of the mandrel when using a 1/4 in. thick crank trigger. Spacers are constructed of stress-proof steel with a black oxide finish, and come with a 1/4 in. longer crankshaft bolt.
( 1 )
$28.99
—
$92.99
On Sale
Aeromotive drive mandrels provide support for your high performance pulleys and belts. These spindles are machined from billet aluminum and coated with a black anodized finish. Drive your pumps reliably from a strong base--drive mandrels from Aeromotive.
Not Yet Reviewed
$235.00
$211.50
Peterson Fluid Systems standard mandrel spacers can help you line up the pulleys on your drive with the accessories mounted to your block or motor plate. Most have a 1 in. I.D. bore, and they're available in a variety of thicknesses to accommodate your application. The mandrel spacers can also be easily machined, if you need a custom length.
Not Yet Reviewed
$8.99
—
$12.99
In the olden days, two to three V-belts were used to provide power to all of the components on a vehicle; now, a single serpentine belt does all of the work with the help of tensioners. Crown Automotive accessory drive components are the same style, design, and size as the OEM units for easy installation and hookup. They will help keep the belt tight and your vehicle moving down the road under its own power. When your vehicle's serpentine belt system needs new parts, turn to Crown Automotive accessory drive components.
( 1 )
$7.99
—
$18.99
Clearance
Peterson Fluid Systems pulley flanges are designed to help keep your belt centered and on the track. Each flange is precision-machined using top quality billet aluminum and then anodized for added durability. These press-fit flanges fit Peterson 1 in. and 1.25 in. wide pulleys, and will help you complete your drive system.
Not Yet Reviewed
$37.79
$19.50
—
$38.79
Dorman recommends replacing your vacuum pump pulleys whenever you service the vacuum pump. These serpentine style pulleys are an essential part of the belt drive system and are a direct replacement. Check for proper fitment for your make and model.
( 2 )
$30.99
—
$104.95
Allstar Performance vacuum pump and dry sump pump drive kit components are exact replacement components designed to help get your vehicle back in perfect working order. Whether it's a mandrel spacer, key, belt guide, or other parts you need, Allstar offers a selection of universal upgrades to restore proper function.
( 1 )
$7.69
—
$10.49
Jones Racing HTD vacuum pump pulleys are efficient. They are lightweight, billet aluminum and take less power to drive your vacuum pump. Bolt on the precision of Jones Racing HTD vacuum pump pulleys.
Not Yet Reviewed
$51.81
Innovators West crank mandrel accessories, such as spacers, bolts, washers, and end caps are available to maintain the performance, fit, and secure mounting of your crank mandrel. The spacers are available in several lengths.
Not Yet Reviewed
$12.03
Stef's drive mandrels furnish the engine builder with high-quality components to drive dry sump pumps, water pumps, alternators, power steering, fuel pumps, or any crankshaft-driven accessory. These parts are engineered to fit with all component pieces and allow you to build your own specialized drive kit. All pulleys and spacers are black anodized for long wear. They come with a 1/8 in. keyway, dowel pins, and a Woodruff key for correct balancer alignment. These mandrels can be cut to suit your particular application.
Not Yet Reviewed
$212.99
Peterson Fluid Systems spline mandrel spacers are designed to dial in your pulley spacing to line up with your accessories. These spacers are CNC-machined from 6061 billet aluminum and are available in common lengths to work with all Peterson spline drive components.
Not Yet Reviewed
$19.99
Peterson Fluid Systems standard drive mandrels are available for most popular engines. Precision-machined from stress-proof steel or 6061 T6 aluminum, these mandrels provide the precision and dependability racers demand.
Not Yet Reviewed
$50.79
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
