Belts & Pulleys | Summit Racing

Moroso Gilmer Drive Belts

These Moroso gilmer drive belts are designed to keep your accessory drive operating properly. They provide higher power and torque transmission, improved meshing to reduce tooth jump, greater resistance to tooth shear, and reduced friction to extend their life. The belts use a fiberglass cord wound across the entire width of the belts to minimize stretching. Moroso gilmer drive belts are manufactured from a synthetic neoprene compound that resists heat, oils, ozone, and aging. Tough nylon fabric is then bonded to the tooth surface for greater wear resistance.

5.0 out of 5 stars ( 5 )

$42.99

—

$50.99

Moroso Vacuum Pump Gilmer Drive Pulleys

Moroso competition-style vacuum pump gilmer drive pulleys bolt directly onto OEM, Holley, and other smog pumps used as engine vacuum pumps to improve ring seal. They're machined from aluminum to reduce weight and use the common 3 x 1.313 in. mounting pattern.

Not Yet Reviewed

$140.99

—

$175.99

Allstar Performance Gilmer Belts

Replace your worn belts with Allstar Performance Gilmer belts. They provide reliable performance, mile after mile. These cogged belts run quieter and meet all OEM performance specifications. When you need replacement belts, check out the stars at Allstar performance.

Not Yet Reviewed

$25.99

—

$37.99

Peterson Fluid Systems Gilmer Belts

Peterson Fluid Systems gilmer belts feature a square-tooth profile and come in 1/2 in., 3/4 in., and 1 in. widths. Peterson supplies only high-quality drive belts from trusted manufacturers—durable and proven in motorsports. Their gilmer belts feature a 3/8 pitch and are available in a variety of lengths to fit all your accessory drive needs.

Not Yet Reviewed

$14.99

—

$64.99

Top Street Performance Gilmer Style Pulley Kits

Gilmer-style pulleys from Top Street Performance are a great solution for any racing set-up. They require less tension and eliminate the problem of slippage and disengagement you'd experience at high RPM with a V-belt. Each kit comes with pulleys for the crankshaft, water pump, and alternator—along with a 1.5 in. wide belt. Regardless of application, Top Street's Gilmer-style pulley kits are an efficient and lightweight option for your high performance engine. Additional notes: * Models available for Chevy big block or small block engines * Pulley material: billet aluminum * Available in black or satin

4.0 out of 5 stars ( 4 )

$186.43

—

$192.60

Jones Racing Square Tooth Gilmer Belts

Jones Racing offers square tooth Gilmer belts in a variety of lengths and widths. The 3/8 in. pitch replacement mechanical belts prevent slippage and ensure transmission of drive to the supercharger's rotating group.

Not Yet Reviewed

$13.99

—

$20.99

Moroso Dry Sump Oil Pump Pulleys

Moroso dry sump oil pump pulleys are designed to give you optional ratios for your dry sump system to achieve that desired drive ratio. They are made from billet aluminum and feature a hard coat anodized finish for durability. Pulleys are available with several different tooth counts to achieve the ratio that you need.

4.29 out of 5 stars ( 7 )

$81.99

—

$128.99

Continental PD Light Drive Belts

Continental PD light drive belts feature precision-molded teeth to deliver the power you need. Continental PD light drive belts are made from a specially compounded rubber, reinforced with high-strength fiberglass tensile cord members, and wrapped in a long-wearing nylon facing. They run smoother, quieter, and last longer. Continental PD light drive belts' specialized compound technology has excellent oil, heat, and ozone resistance, increasing durability and belt life in the harshest conditions. They are designed to be used with fraction power-rated motor applications such as in-home appliances, small tools, pumps, blowers, etc.

5.0 out of 5 stars ( 1 )

$18.99

—

$42.99

Moroso Replacement Electric Drive Water Pump Pulleys

Moroso replacement electric drive water pump pulleys are universal fitting, direct replacement pulleys for Moroso electric water pump drive kits. They are made from black plastic and intended for drag race applications only.

4.0 out of 5 stars ( 1 )

$33.21

Moroso Billet Aluminum Crankshaft Pulleys

Get more horsepower with Moroso billet aluminum crankshaft pulleys. They are machined from solid billets of the highest-grade aircraft aluminum for maximum durability and feature deep, precision-machined grooves to ensure belt retention, even during extreme changes in engine rpm. When crankshaft and water pump pulleys are used together, water pump speed is reduced by approximately 30 percent. These pulleys have an anodized hard-coat for extended life.

5.0 out of 5 stars ( 1 )

$100.99

Aeromotive Belt Drive Fuel Pump Belts

Get your Aeromotive belt drive fuel pump up and running with their belts. These durable, long-lasting belts are made from neoprene with a fiberglass cord.

Not Yet Reviewed

$50.90

Moroso Electric Water Pump Drive Pulleys

Moroso electric water pump drive pulleys will allow you to change the speed of the water pump. They come in two different tooth counts to allow the speed change. These pulleys are made from aluminum and feature a hard coat, anodized finish for durability.

5.0 out of 5 stars ( 4 )

$32.99

—

$36.99

Peterson Fluid Systems Oil Pump Pulleys

Peterson Fluid Systems standard drive mandrel pulleys fit the standard .625 in. mandrel. All of the pulleys feature a .625 in. bore and fit a 3/16 in. keyway. They are available in Gilmer and 8mm HTD tooth profiles. These oil pump pulleys are available in 1.020 in and 1.125 in. widths and each includes 4 set screws to keep them secured to the shaft. Peterson oil pump pulleys are precision machined from 6061-T6 billet aluminum and hard anodized for long-term wear resistance.

Not Yet Reviewed

$92.99

—

$136.99

Rough Country Performance CVT Drive Belts

If you want to take on tougher challenges and push your UTV to its limits without worrying about drive belt failure, you will need Rough Country Performance CVT drive belts. They reduce slippage, increase horsepower capacity, and offer more responsive engine braking, all while running cooler. Built to handle higher heat and longer rides than the stock drive belt, Rough Country CVT drive belts are the ultimate solution for enhancing your UTV's performance. With an advanced design and top-of-the-line features, Rough Country CVT drive belts are engineered to deliver a superior level of performance that will take your UTV to the next level. Upgrade your UTV with the ultimate performance boost. Select the CVT drive belt designed for your off-road machine. Features: * Constructed with specially formulated, high temperature polychloroprene * Aramid fiber reinforcement construction increases horsepower capacity and more responsive engine braking during deceleration * Tested and proven reliable at over 12,000 rpms, for faster, more consistent throttle response and improved durability * Deeper cogs on top and rounded cogs on bottom for ultimate flexibility, longer belt life, and cooler running temperatures * Quicker throttle response at mid-speed acceleration * Greater secondary acceleration at high rpm * Reduction in slippage during the highest levels of torque * Increased horsepower capacity * Better performance during deceleration (more responsive engine braking)

Not Yet Reviewed

$49.95

—

$69.95

Peterson Fluid Systems Standard Drive Mandrel Pulleys

Peterson Fluid Systems standard drive mandrel pulleys fit the standard 1 in. mandrel. All of the pulleys feature a 1 in. bore and fit a 1/8 in. keyway. They are available in Gilmer and HTD teeth profiles. Gilmer pulleys have a square tooth profile and are available in .560 in. and 1.020 in. widths. The HTD pulleys have an 8mm round tooth profile and they are available in 1.020 in. widths. Peterson Fluid Systems standard drive mandrel pulleys are precision machined from 6061-T6 billet aluminum and hard coat anodized for durability and long life.

Not Yet Reviewed

$44.99

—

$72.99

Continental Powerstreak Sports Vehicle Belts

Continental Powerstreak sports vehicle belts are built for speed, with high horsepower capacity and top-end performance. They're stronger than steel and help to reduce heat buildup. These belts are designed for incredibly long life under even the most rugged conditions. The secret is the Flexten cord, which, pound for pound, is five times stronger than steel. A special tire cord supports the Flexten cord for extra load-carrying capacity, and a Flexten fiber cushion increases heat resistance. They also feature fabric-covered cogs for long belt life.

5.0 out of 5 stars ( 1 )

$17.99

Continental PD Heavy Drive Belts

Continental PD heavy drive belts feature precision-molded teeth to deliver the power you need. Continental PD heavy drive belts are made from a specially compounded rubber, reinforced with high-strength fiberglass tensile cord members, and wrapped in a long-wearing nylon facing. They run smoother, quieter, and last longer. Continental PD heavy drive belts' specialized compound technology has excellent oil, heat, and ozone resistance, increasing durability and belt life in the harshest conditions. Designed to be used with machine tools, pumps, fans, presses, motor generator sets, etc.

5.0 out of 5 stars ( 1 )

$33.99

—

$130.99

HardDrive Rear Drive Belts

Rear drive belts are under tremendous stress. HardDrive replacement belts are manufactured from state-of-the-art materials to ensure high-strength durability, quiet running, and a long life. Confirm the exact size of belt that is on your bike prior to ordering.

5.0 out of 5 stars ( 1 )

$157.46

—

$230.36

Continental PD Double Extra Heavy Drive Belts

Continental PD double extra heavy drive belts feature precision-molded teeth to deliver the power you need. Continental PD double extra heavy drive belts are made from a specially compounded rubber, reinforced with high-strength fiberglass tensile cord members, and wrapped in a long-wearing nylon facing. They run smoother, quieter, and last longer. Continental PD double extra heavy drive belts' specialized compound technology has excellent oil, heat, and ozone resistance, increasing durability and belt life in the harshest conditions. Designed to be used with high torque applications on heavy industrial equipment.

Not Yet Reviewed

$327.99

—

$739.99

Waterman Racing Fuel Pump Drive Belts

Waterman Racing fuel pump drive belts will perform efficiently under high temperatures and speed, while ensuring an OE fit along with quiet operation and resistance to corrosion, stretch, and wear. Equip your vehicle with the quality and durability of Waterman drive belts.

Not Yet Reviewed

$51.50

—

$102.99

Continental PD Extra Heavy Drive Belts

Continental PD extra heavy drive belts feature precision-molded teeth to deliver the power you need.Continental PD extra heavy drive belts are made from a specially compounded rubber, reinforced with high-strength fiberglass tensile cord members, and wrapped in a long-wearing nylon facing. They run smoother, quieter, and last longer. Continental PD extra heavy drive belts' specialized compound technology has excellent oil, heat, and ozone resistance, increasing durability and belt life in the harshest conditions. Designed to be used with medium torque applications on heavy industrial equipment.

Not Yet Reviewed

$483.99

Peterson Fluid Systems Spline Drive Pulleys

Peterson Fluid Systems spline drive pulleys work with all Peterson spline drive components. They are offered in Gilmer and HTD teeth profiles, and feature the same great build quality from 6061-T6 billet aluminum with hard coat anodizing for durability and long life. Specifications: * Gilmer pulleys have a square tooth profile and are available in .560 in. and 1.020 in. widths * HTD pulleys have an 8mm round tooth profile and they are available in 1.020 in and 1.250 in. widths.

Not Yet Reviewed

$63.99

—

$69.99

Biondo Quick Cool Pulleys

Replace your existing water pump pulley with the "Quick Cool" pulley from Biondo and you will see a change in your water temperature after a run. The cool pulley has 14-teeth instead of the standard pulley's 10, and therefore it can cool 40 percent faster, plus, the polished finish dresses up any engine compartment. The Biondo Quick Cool pulleys are designed to fit on any Mr. Gasket or Moroso pump, so there's no need to change belt, in most cases.

Not Yet Reviewed

$16.99