Availability
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 286 )
$3.99
—
$168.99
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 252 )
$11.99
—
$372.99
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$19.50
—
$264.99
Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications. pMaxKote provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 10 )
$10.99
—
$406.99
Give your engine the winning edge with King XP-Series coated main bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote™ nano-composite coating takes protection to the next level without adding any additional thickness! Order the replacement main bearings designed for fitment with your engine. pMaxKote™ provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 7 )
$67.99
—
$338.99
ACL Performance Race Series main bearing sets deliver everything performance bearings should be by utilizing design, metallurgy, engineering, precision quality control, and of course, years of knowledge and experience. Main bearings feature multi-layered tri-metal copper alloy construction that blends characteristics to provide high strength and excellent seizure resistance. They are manufactured to exact tolerances ensuring a reliable fit and helping to maintain consistent clearances. Main bearings are augmented with extended grooves, as well as other bearing enhancements, like increased crush, bearing eccentricity, and enlarged I.D. chamfers. ACL Performance Race Series main bearing sets are produced in standard and extra clearance versions, with or without friction reducer coating, and with modifications to meet specific build requirements, such as narrowed bearings that permit additional edge clearance when running crankshafts with exceptionally large fillet radii. In the heat of competition proven technology always comes through. The choice for your build should always be ACL Performance Race Series engine bearings. Choose the main bearing set designed for your vehicle.
( 1 )
$46.99
—
$263.99
If you liked the results that you used to get with Vandervell bearings--especially their higher conformability--then you should love Clevite V-Series rod bearings, which basically duplicate the Vandervell items. Built on un-plated, hardened-steel backings for better dimensional accuracy and bore contact, they have low-to-medium eccentricity. The biggest difference between V-Series and other Clevite 77 bearings is their lead-indium surface alloy, which gives them that extra conformability. V-Series bearings are available in narrower versions to provide greater crank-fillet clearance, as well as in extra-clearance variations that provide an additional 0.001 or 0.002 in. of clearance.
( 5 )
$8.99
—
$399.99
If you liked the results you used to get with Vandervell bearings--especially their higher conformability--then you should love Clevite V-Series main bearings. Built on unplated steel backings, for better dimensional accuracy and bore contact, they have low-to-medium eccentricity. The biggest difference between V-Series and other Clevite 77 bearings is their lead-indium surface alloy, which gives them that extra conformability. Unlike Vandervell main bearings, Clevite V-Series main-bearing sets use a single-piece thrust bearing, so you don't need separate, assembled thrust bearings. Extra-clearance variations are available to provide an additional 0.001 or 0.002 in. of clearance.
( 5 )
$87.99
—
$419.99
For high load applications, King SM-Series rod bearings contain the strongest aluminum-based material offered by King. The alloy is strengthened by the addition of manganese and chromium. King SM-Series connecting rod bearings feature a traditional steel-backing, plus an aluminum bonding layer and the aluminum bearing alloy. These replacement sets are available for a variety of vehicle applications.
( 1 )
$10.50
—
$140.99
King XPG-Series main bearings feature a unique lug design that eliminates the conventional lug recess, so no oil escapes and full oil pressure is maintained. In addition, narrowed bearing lengths help eliminate dangerous fillet ride on high-radius cranks. With enhanced tri-metal copper/lead construction and nickel barrier, plus SecureBond adhesion, King XPG-Series main bearings have a 20 percent higher load capacity and better resist surface fatigue. For superior engine components, choose King.
( 2 )
$76.99
—
$166.99
ACL Performance offers cam bearing sets for a wide range of vehicles from 1955 and up. The high performance tri-metal engine bearings are designed to withstand higher RPM conditions. Each direct-fit replacement bearing features a high-strength overlay plate with reduced thickness for improved fatigue properties. Oder the set recommended for your year/make and engine application. Additional details: *Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high rpm and to assist in the formation of hydrodynamic oil film * 3/4 in. grooved main bearings GROOVED MAIN BEARINGS to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges where required to accommodate large fillet radius on performance crankshafts
( 1 )
$26.79
—
$95.99
For high load and performance applications, King SM-Series main bearings are the strongest aluminum-based material offered by King. The alloy is strengthened by the addition of manganese and chromium. SM-Series crankshaft main bearings feature a traditional steel-backing, aluminum bonding layer, and the aluminum bearing alloy. They are available for a wide variety of vehicle and engine applications.
Not Yet Reviewed
$32.99
—
$185.99
King XPG-Series coated rod bearings feature a unique lug design that eliminates the conventional lug recess, so no oil escapes and full oil pressure is maintained. With enhanced tri-metal copper/lead construction and nickel barrier, plus SecureBond adhesion, King XPG-Series coated rod bearings have a 20 percent higher load capacity—and better resist surface fatigue. They also feature King's factory-applied pMaxKote nano-composite coating that takes protection to the next level without adding any additional thickness! These replacement sets are available in different sizes for a variety of applications. For superior engine components, choose King.
Not Yet Reviewed
$40.99
—
$81.99
King XPG-Series coated main bearings feature a unique lug design that eliminates the conventional lug recess—so no oil escapes and full oil pressure is maintained. With enhanced tri-metal copper/lead construction and nickel barrier, plus SecureBond adhesion, these bearings have a 20 percent higher load capacity and will better resist surface fatigue. They also feature King's factory-applied pMaxKote nano-composite coating that takes protection to the next level without adding any additional thickness! XPG-Series sets are available for a variety of vehicle and engine applications.
Not Yet Reviewed
$153.99
King XPG-Series rod bearings feature a unique lug design that eliminates the conventional lug recess, so no oil escapes and full oil pressure is maintained. In addition, narrowed bearing lengths help eliminate dangerous fillet ride on high-radius cranks. With enhanced tri-metal copper/lead construction and nickel barrier, plus SecureBond adhesion, King XPG-Series rod bearings have a 20 percent higher load capacity—and better resist surface fatigue. For superior engine components, choose King.
Not Yet Reviewed
$36.99
—
$49.99
Are you looking to replace a broken or worn-out crankshaft? Hot Rods crankshafts are sold with or without Hot Rods connecting rods and wrist pin bearings. These crankshafts are factory assembled and trued to OEM specifications. They avoid the additional machine work and extra parts typically required for long-stroke engines. Stroker crankshafts use stock pistons. Heavy-duty crankshafts utilize their heavy-duty connecting rods. Bolt in and go with these Hot Rods crankshafts!
Not Yet Reviewed
$1,120.00
King SV-Series main bearings offer a lead-free silver-based overlay material containing solid lubricant additives distributed throughout the silver matrix. These crankshaft main bearings are designed for extreme load engines and can be used as a sputter replacement. Order the set recommended for your vehicle and engine application.
Not Yet Reviewed
$215.99
Cleveite crankshaft engine main bearing shim sets feature 100 percent lead-free aluminum silicon. Engineered with 60 percent more silicon than comparable competitive replacements, these spacers provide better conditioning of journal surfaces, resulting in greater seizure and wear resistance. Order the set recommended for your year/make and engine application. Additional notes: * Designed to be the highest quality replacement aluminum engine bearings available, Clevite bi-metal engine bearings set the standard * Relatively harder aluminum alloy wears well, interacts closely with journal surfaces for strength * Recommended for use with nodular iron crankshafts * Manufactured with 100 percent bored inside diameters for optimum surface characteristics and consistent precision * Manufactured to meet or exceed OE specifications
Not Yet Reviewed
$140.99
King TFC-Series engine main bearings feature a special factory applied nano-composite polymer coating—with no added thickness! The Top Fuel Line represents the culmination of the innovative and goal oriented research and production from King Engine bearings House. These bearings are available for a wide range of vehicles, especially year/make and engine applications from the 1960s and '70s. Additional details: TOP FUEL BEARINGS with K-40 POLYMER COATING: This coating composition was specially designed for engines experiencing continuous metal-to-metal contact, which is characteristic of the extreme loading and conditions found in various categories of drag racing. K-40 is used for Top Fuel, Funny Car, Pro Mod and similar applications—where bearings are required to resist metal-to-metal contact and deformation. Extreme loads cause the oil film to break down, allowing contact between the bearing and crankshaft surfaces. Maintaining low friction, even during the conditions of metal-to-metal contact, is crucial to the life of any engine bearing. King TFC bearings are designed to withstand the loading generated from 10,000 hp Top Fuel engines. TFC winning attributes: * HIGH STREGTH STEEL: able to withstand extreme loads * SPECIAL DUCTILE BRONZE LINING: will not crack under significant plastic deformation caused by high power engine (10,000 hp) * EXTRA THICK BABBIT LINING: strengthened by copper, excellent conformability * K-40 POLYMER LAYER: provides excellent anti-friction and anti-seizure properties during metal-to-metal contact
Not Yet Reviewed
$208.99
—
$382.99
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 162 )
$24.99
Built with enhanced tri-metal, King XP-Series main bearings have a layered copper lead construction, with a nickel plate barrier and lead/tin/copper Babbitt overlay over a steel backing--in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors: an amazing +/- .0001 in. The XP-Series main bearings are narrowed for large radii crankshafts and feature enlarged, chamfered oil holes with full, 3/4 in., or 1/2 in. grooving for improved oiling. They deliver consistent and reliable performance with a high-load capacity. These race-only Xtreme Performance (XP-Series) Tri-Lecular main bearings are proven track-tough to handle the ground-shaking power of your race engine. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 43 )
$51.50
—
$203.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 68 )
$79.99
—
$152.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
