Availability
Showing In Stock Items. Show All 13 Items.
If you're building a serious performance engine, then you'll want to consider Speed-Pro Competition Series main bearings. They were developed in NASCAR and Pro Stock competition, so you know they're tough. The bearings are built on premium 1020AK steel backings and overlaid with Speed-Pro's super-duty H-14 alloy. That layer is then covered with a nickel barrier, followed by a thin lead-tin-copper overplate. However, unlike other performance bearings, there is no flash tin layer on top of that. Speed-Pro's engineers have determined that such a layer can actually move around under high loads—sometimes with undesirable consequences. Depending on the application, these main bearings have oil grooves for enhanced lubrication, while maintaining a maximum bearing surface area. They also feature Speed-Pro's exclusive contoured-flange thrust bearing technology for higher thrust-loading capacity. Competition Series main bearings are available in nearly a hundred configurations for countless vehicle and engine applications.
( 63 )
$74.99
—
$150.99
Today's engines operate under very demanding conditions. When these Sealed Power main bearing sets are used in performance applications, all components are pushed to their limits—and many must be changed to meet these special demands. Federal Mogul, a longtime supplier to both OEM and the aftermarket, has responded to this challenge with its tri-metal, copper-lead, high performance main bearing sets. They're tested in the lab and proven on the track. The bearings are available for various crankshaft undersizes, for direct replacement or performance usage on a wide range of specific applications.
( 98 )
$42.99
—
$112.99
Today's engines operate under very demanding conditions. Sealed Power has responded to this challenge with their babbit high performance cam bearings. They feature high embedability and conformability and a special "sacrificial" design that enables the bearing surface to deform under extreme loads, preventing any wear and damage to the camshaft.
( 118 )
$29.99
Summit Racing™ offers Race Series main bearing sets for a wide range of applications—including many Chevrolet, Ford, Chrysler, Dodge, Jeep, Ram small block, big block, and Hemi engines from the early 1960s and up. Main bearings hold the crankshaft in place and allow it to rotate within the engine block. These performance replacements are machined from tri-metal copper-lead alloy, and are available in numerous upper/lower groove styles and engine crankshaft undersize options. Order the set recommended for your vehicle.
( 4 )
$127.99
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 252 )
$102.99
—
$155.99
Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.
( 118 )
$10.99
—
$97.99
King CP-Series rod bearings are premium OEM replacement bearings designed from copper-lead on steel with a .001 in. copper-lead tin over-plate. These quality OEM rod bearings are temperature-resistant with a high-load capacity to provide dependable engine performance. From quick repairs to full engine rebuilds, you can count on King Engine Bearings.
( 3 )
$46.99
—
$75.99
If you're building a high-level competition engine, you'll definitely want to consider Speed-Pro Competition Series rod bearings. They were developed in the trenches in NASCAR and Pro Stock competition, so you know they're tough. These bearings are built on premium 1020AK steel backings and overlaid with Speed-Pro's super-duty H-14 alloy. That's covered with a nickel barrier, followed by a thin lead-tin-copper overplate. However, unlike other performance bearings, there is no flash tin layer on top of that. That's because Speed-Pro engineers have determined that such a layer can actually move around under high performance conditions, sometimes resulting in undesirable consequences. Order the set designed for your vehicle and engine application.
( 41 )
$83.99
King HP-Series main bearings are recommended for street and strip performance applications. They're designed for blown, turbocharged, NOS, and alcohol-fueled engines using aftermarket crankshafts. These main bearings have greater eccentricity for superior oiling at high rpm, and a chamfered surface for large radii crankshafts. HP-Series bearings also feature large, chamfered oil holes—and are available in 1/2 grooving for improved oiling to withstand high-rpm applications. Order the bearings designed for fitment with your specific engine.
( 48 )
$165.99
Clevite G-Series bearings feature a tri-metal construction--a soft lead-alloy outer layer, a copper-lead center, and a rugged steel backing. They will withstand the friction, dirt, misalignment, wear, corrosion, and heat that chew away at bearing and journal life. Shouldn't they be in your engine?
Not Yet Reviewed
$139.99
Built with enhanced tri-metal, King XP-Series main bearings have a layered copper lead construction, with a nickel plate barrier and lead/tin/copper Babbitt overlay over a steel backing--in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors: an amazing +/- .0001 in. The XP-Series main bearings are narrowed for large radii crankshafts and feature enlarged, chamfered oil holes with full, 3/4 in., or 1/2 in. grooving for improved oiling. They deliver consistent and reliable performance with a high-load capacity. These race-only Xtreme Performance (XP-Series) Tri-Lecular main bearings are proven track-tough to handle the ground-shaking power of your race engine. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 43 )
$161.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
