Availability
Showing In Stock Items. Show All 28 Items.
Dura-Bond high performance cam bearings are ideal for racing. They offer double the fatigue strength of standard bearings.
( 104 )
$22.99
—
$53.99
Clevite camshaft bearings are manufactured to meet or exceed OEM parts when it comes to strength and durability. They will help to give your motor extra life, and their quality construction and superior materials will help to protect your vital engine parts from the harmful effects of friction. With thousands of applications, you're sure to find the bearings you need for your motor.
( 184 )
$24.99
—
$46.99
These Summit Racing™ camshaft bearings are just what you need to freshen up your engine. Why? They use silicon aluminum bi-metal construction. Silicon aluminum is the choice for many of today's engine manufacturers because of its high fatigue strength and superior temperature threshold. Bearing wear is dramatically reduced and the fatigue strength is greatly improved.
( 65 )
$20.99
—
$48.99
Economical Dura-Bond standard cam bearings feature round babbit construction for low friction, outstanding conformability, and added embeddability.
( 95 )
$20.50
—
$55.99
Today's engines operate under very demanding conditions. Sealed Power has responded to this challenge with their babbit high performance cam bearings. They feature high embedability and conformability and a special "sacrificial" design that enables the bearing surface to deform under extreme loads, preventing any wear and damage to the camshaft.
( 118 )
$24.99
—
$45.99
Howards Cams and Racing Components offers camshaft thrust washer bearings for a variety of applications, including many Chevrolet and Ford engines from the 1950s and up. These replacements act as a bearing surface for components to rotate, transmitting and absorbing excess force to reduce friction and wear so that the components can move smoothly. They're made from factory materials and specifications to ensure proper fit and performance. Order the bearings recommended for your vehicle.
( 1 )
$21.99
—
$24.99
Summit Racing™ offers cam bearing sets for a wide range of applications—including many Chevrolet small block V8 engines from 1955 and up. These bearings support the camshaft and allow it to rotate so it will activate pushrods and rocker arms to open and close valves. The direct replacements are available in a variety of materials. Order the set recommended for your vehicle.
Not Yet Reviewed
$24.99
—
$45.99
King HP-Series cam bearings are precision-machined to tight tolerances to control installed oil clearances, reducing operating bearing pressure. These cam bearings are constructed from seamless steel tubing with a thin layer of lead based babbit material to reduce microscopic deflections. The babbit is quickly cooled in the casting process to achieve a very fine grain structure, doubling tensile strength, therefore, the HP-Series offers much more fatigue strength than conventional bearings, and can withstand racing spring loads, while maintaining the excellent surface characteristics of babbit. King also offers HP-Series bearings with a fluoropolymer coating. Bearings with this coating retain engine oil on the surface, even under extreme heat and pressure—a great advantage! Plus, being a lubricant, it provides backup during start-up and in the event of momentary oil starvation. Use track-tough King HP-Series cam bearings in your engine—and experience the difference.
( 13 )
$40.99
Summit Bucks
ACDelco GM Genuine Parts camshaft bearings are true OE parts installed during production of or validated by General Motors for GM applications. They're designed, engineered, and tested to rigorous standards to ensure the correct fit and function in your vehicle. These bearings are machined from steel-backed bronze alloy and are available in a variety of diameters. For a stress-free install and predictable performance, service your vehicle with direct-fit replacement parts from ACDelco.
( 2 )
$34.99
King Engine BB-Series cam bearings are recommended for OE rebuild applications. These cam bearings are babbitt on steel, and are precision machined and then micro-finished to offer long-lasting durability. Save yourself a costly rebuild with King Engine BB-Series cam bearings—stock replacements that been proven, time and time again, to get the job done.
( 14 )
$23.99
—
$59.99
ACL Performance offers cam bearing sets for a wide range of vehicles from 1955 and up. The high performance tri-metal engine bearings are designed to withstand higher RPM conditions. Each direct-fit replacement bearing features a high-strength overlay plate with reduced thickness for improved fatigue properties. Oder the set recommended for your year/make and engine application. Additional details: *Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high rpm and to assist in the formation of hydrodynamic oil film * 3/4 in. grooved main bearings GROOVED MAIN BEARINGS to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges where required to accommodate large fillet radius on performance crankshafts
( 1 )
$26.79
—
$39.79
On Sale
Camshaft bearings have a relatively easy life compared to other bearings, but they too, eventually need to be replaced. Get Crown Automotive camshaft bearings if they're scored, showing copper, out of spec, or you want all-new parts. They're designed and manufactured to OEM specs for excellent fitment, dependability, and correct sizing.
( 1 )
$30.99
—
$59.99
$27.89
—
$53.99
If you're building up a Dart block and want the best bearings with the correct sizing, then you'll want Dart cam bearings. They're fully grooved, made from steel-backed babbit, and specifically designed for high performance use. To all of this, Dart adds their own moly-PTFE coating for even better performance and durability. This coating is approximately 0.0005 in. thick, which translates into 0.001 in. less overall clearance.
( 34 )
$24.67
—
$29.50
Dura-Bond Universal HP cam bearings are ideal for racing. These high performance replacements offer double the fatigue strength of standard bearings, withstand racing spring loads, and maintain the excellent surface characteristics of Babbit. They're available in a dozens of size options, with or without a groove.
Not Yet Reviewed
$21.99
Summit Racing™ Hi-Performance Cam Bearings are designed for racing and other high-performance applications. A manufacturing process that features improved materials and optional coatings for higher fatigue resistance when running higher RPM's and valve train loads makes them an ideal upgrade component for your performance or racing engine build. Summit Racing™ Hi-Performance Cam Bearings are available individually and in sets. .
Not Yet Reviewed
$29.99
Dura-Bond took their high performance bearings and coated them with a secondary dry film lubricant for added protection against oil starvation.
( 45 )
$27.99
—
$52.99
All Balls Racing wheel and carrier bearing seal kits are hands-down the most complete line of bearing seal kits on the market! They are available in a wide variety of powersports applications, from ATV and off-road to street bikes. These All Balls Racing wheel and carrier bearing seal kits have premium high-speed bearings that feature low-drag, double-lip seals on both sides to provide superior exclusion of water and dirt and improved grease retention. High performance Chevron SRI-II grease features special rust inhibitors for the most demanding applications. Type TC nitrile elastomer wheel seals are specifically designed to keep out water and dirt. Their rubber coated outside diameter helps to create an optimum seal at the hub.
( 20 )
$45.88
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 163 )
$23.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 68 )
$48.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
