Availability
Showing In Stock Items. Show All 49 Items.
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 285 )
$20.99
—
$57.99
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 251 )
$28.99
—
$52.99
Clevite coated H-Series rod bearings were developed primarily for NASCAR racing, but are also well suited to other types of competition engines. They're especially good for engines that run at medium-to-high revs. They have hardened-steel backings with thin overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings feature Clevite's exclusive TriArmor coating, the industry's only moly/graphite treatment. The sophisticated blend, in a low-friction PTFE polymer base, offers extraordinary protection and lubricity. They also have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. The Clevite coated H-Series rod bearings are available with various under-sizes, including 0.001 in. of clearance for polished journals.
( 10 )
$20.99
—
$25.99
King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.
( 79 )
$20.99
—
$55.99
Sealed Power A-Series rod bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank with a surface that hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better wall variance control. It also helps to minimize debris embedding, which can score the crank's surface. Order the replacement bearings designed for your vehicle make and engine application.
( 33 )
$22.99
—
$55.99
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 7 )
$37.99
—
$52.99
These Sealed Power MA Series main bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank whose surface hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better control of wall variance. It also helps to minimize debris embedding, which can score the crank's surface.
( 75 )
$35.99
—
$54.99
Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.
( 115 )
$21.99
—
$92.99
If you liked the results that you used to get with Vandervell bearings--especially their higher conformability--then you should love Clevite V-Series rod bearings, which basically duplicate the Vandervell items. Built on un-plated, hardened-steel backings for better dimensional accuracy and bore contact, they have low-to-medium eccentricity. The biggest difference between V-Series and other Clevite 77 bearings is their lead-indium surface alloy, which gives them that extra conformability. V-Series bearings are available in narrower versions to provide greater crank-fillet clearance, as well as in extra-clearance variations that provide an additional 0.001 or 0.002 in. of clearance.
( 5 )
$20.99
Summit Racing™ offers Race Series rod bearing sets for a wide range of applications—including many Chevrolet, Buick, Ford, Ram, Jeep, Dodge, Chrysler, and Plymouth small block, big block, and Hemi engines from 1955 and up. The bearings provide a low-friction pivot point between the connecting rod and the crankshaft, and the connecting rod and piston. They keep the crankshaft and connecting rod in place as they rotate. These performance replacements are machined from tri-metal copper-lead alloy and are available in numerous engine crankshaft undersize options. Order the set recommended for your vehicle.
( 2 )
$27.99
—
$48.99
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 162 )
$20.99
—
$45.99
Summit Racing™ offers Race Series main bearing sets for a wide range of applications—including many Chevrolet, Ford, Chrysler, Dodge, Jeep, Ram small block, big block, and Hemi engines from the early 1960s and up. Main bearings hold the crankshaft in place and allow it to rotate within the engine block. These performance replacements are machined from tri-metal copper-lead alloy, and are available in numerous upper/lower groove styles and engine crankshaft undersize options. Order the set recommended for your vehicle.
( 3 )
$39.99
—
$49.99
More and more manufacturers have shifted to aluminum bearings in their OE engines and Clevite AL-Series rod bearings are designed to be the highest-quality replacement bearings in the industry. They carry on the tradition and reputation that Clevite has built throughout the course of time. AL Series engine bearings feature a 100 percent lead-free aluminum silicon bi-metal material, which includes 60 percent more silicon than the leading competitor's bi-metal material for better conditioning of journal surfaces. These bi-metal bearings also offer greater wear resistance than the leading competitor's bi-metal material, as well as greater seizure resistance. Clevite AL-Series bearings feature 100 percent bored inside diameters for precision and surface characteristics and, where appropriate, straight-shell main bearings utilizing an "umbrella" groove that allows for superior oil control and improved pressure.
( 26 )
$21.99
—
$53.99
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 92 )
$20.99
—
$52.99
For some engines, the softer and more conformable nature of aluminum is preferable to the stiffer characteristics of the steel backings used for many bearings. Clevite AL-Series main bearings offer the features found in OE-type aluminum bearings, combined with the distinct advantages of proven Clevite know-how. That includes things such as carefully chosen eccentricities tailored to the application, and that means solid, reliable performance. Clevite AL-Series main bearings are a great choice for anything from OEM-style rebuilds to mild performance applications. Clevite recommends these main bearings for most engines using a cast crankshaft.
( 10 )
$30.99
—
$53.99
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 133 )
$21.99
King SV-Series rod bearings provide movement with minimal power loss. Connecting rod bearings provide rotating motion of the crank pin within the connecting rod, which transmits cycling loads applied to the piston, and King SV-Series will provide this function well to handle your extreme load engines. These King SV-Series connecting rod bearings are copper-based and lead-free, offering great wear resistance, as well as load capacity.
( 3 )
$23.99
—
$47.99
King AM-Series main bearings are recommended for street or marine applications. These crankshaft bearings have superior embeddability, which provides greater macro-particle to reduce scratching of the crank journals and tearing or weakening of the Babbitt overlays. King AM-Series main bearings feature tolerance control to within plus or minus .0001—and they're lead-free, making them environmentally-friendly and user-safe. Hundreds of performance sets are available; order the replacement bearings designed to fit your vehicle.
( 34 )
$20.99
—
$53.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 66 )
$29.99
—
$52.99
For high load applications, King SM-Series rod bearings contain the strongest aluminum-based material offered by King. The alloy is strengthened by the addition of manganese and chromium. King SM-Series connecting rod bearings feature a traditional steel-backing, plus an aluminum bonding layer and the aluminum bearing alloy. These replacement sets are available for a variety of vehicle applications.
( 1 )
$21.99
—
$52.99
Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications. pMaxKote provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 10 )
$21.99
—
$71.99
King AM-Series rod bearings are recommended for street or marine applications. They have superior embeddability, which provides greater macro-particle and reduces scratching of the crank journals and tearing or weakening of the Babbitt overlays. The direct replacements feature tolerance control up to +/- .0001—and they're lead-free, making them environmentally friendly and user-safe. Order the King AM-Series rod bearings in the application designed for proper fitment with your vehicle.
( 27 )
$20.99
—
$54.99
King MC-Series engine main bearings are available for a wide range of vehicles, including models from Chevrolet, GMC, Ford, Cadillac, Hummer, Isuzu, Pontiac, and Saab. These stock replacements are machined from bi-metal silicon aluminum and sold in sets of 5 or 6, depending on your application. Main bearings hold the crankshaft in place and allow it to rotate within the engine block.
Not Yet Reviewed
$53.60
King Engine BB-Series cam bearings are recommended for OE rebuild applications. These cam bearings are babbitt on steel, and are precision machined and then micro-finished to offer long-lasting durability. Save yourself a costly rebuild with King Engine BB-Series cam bearings—stock replacements that been proven, time and time again, to get the job done.
( 14 )
$21.99
—
$59.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
