Availability
Showing In Stock Items. Show All 47 Items.
For stock replacement rod bearings with perfect fit and function, choose Chevrolet Performance. Available for your LS-Series and big block engines, these rod bearings offer worry-free performance for your big horsepower. When you need originals, go to the original--Chevrolet Performance connecting rod bearings.
Not Yet Reviewed
$17.99
—
$21.99
Clearance
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$42.99
$19.50
Keep your main caps secure with a set of Chevrolet Performance main cap fasteners. They are made from quality OEM materials and are built to strict tolerances to ensure a direct fit. You don't ever want to have a failure in your engine's rotating assembly. Pick up Chevrolet Performance main cap fasteners for maximum reliability.
( 6 )
$13.99
Dura-Bond high performance cam bearings are ideal for racing. They offer double the fatigue strength of standard bearings.
( 104 )
$22.99
ACL direct replacement rod bearing sets are affordable, high-quality bearings expertly made from premium materials and engineered to match your exact requirements. They are offered in the Aluglide and Duraglide Series of bearings in numerous sizes, including standard, and covering a vast range of automotive gas engines, as well as diesel applications. Select the set desired for your build. ACL Aluglide bi-metal bearings are designed with a proprietary composition of aluminum, tin, and silicon combined with a steel backing to provide exceptional wear resistance, outstanding strength, and excellent load-carrying characteristics. ACL Duraglide bearings feature a tri-metal (copper/lead/alloy) design that provides a combination of high strength and the ability to withstand harsh/demanding operating conditions above casual driving, making them ideal for performance engines and rebuilds.
( 1 )
$10.50
—
$21.99
Clearance
ACL direct replacement main bearing sets include their Aluglide and Duraglide Series of bearings in numerous sizes, including standard, and covering a vast range of automotive gas engines, as well as diesel applications. ACL Aluglide bearings are designed with a proprietary composition of aluminum, tin, and silicon combined with a steel backing to provide exceptional wear resistance, outstanding strength, and excellent load-carrying characteristics. ACL Duraglide bearings feature a tri-metal (copper/lead/alloy) design that provides a combination of high strength and the ability to withstand harsh/demanding operating conditions above casual driving, making them ideal for performance engines and rebuilds. Affordable, high-quality engine bearings expertly made from premium materials and engineered to match your exact requirements, ACL main bearing sets. Select the set designed for your engine.
( 1 )
$36.99
$10.50
—
$22.99
If you liked the results that you used to get with Vandervell bearings--especially their higher conformability--then you should love Clevite V-Series rod bearings, which basically duplicate the Vandervell items. Built on un-plated, hardened-steel backings for better dimensional accuracy and bore contact, they have low-to-medium eccentricity. The biggest difference between V-Series and other Clevite 77 bearings is their lead-indium surface alloy, which gives them that extra conformability. V-Series bearings are available in narrower versions to provide greater crank-fillet clearance, as well as in extra-clearance variations that provide an additional 0.001 or 0.002 in. of clearance.
( 5 )
$17.99
—
$20.99
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 285 )
$10.99
—
$23.99
When you need performance motorcycle parts, S&S Cycle will keep your bike in top form. These camshaft needle bearing assemblies are top-quality OE replacements and they offer a perfect fit for your American V-Twin.
Not Yet Reviewed
$15.26
—
$19.76
Clevite coated H-Series rod bearings were developed primarily for NASCAR racing, but are also well suited to other types of competition engines. They're especially good for engines that run at medium-to-high revs. They have hardened-steel backings with thin overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings feature Clevite's exclusive TriArmor coating, the industry's only moly/graphite treatment. The sophisticated blend, in a low-friction PTFE polymer base, offers extraordinary protection and lubricity. They also have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. The Clevite coated H-Series rod bearings are available with various under-sizes, including 0.001 in. of clearance for polished journals.
( 10 )
$11.99
—
$20.99
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 163 )
$11.50
—
$23.99
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 94 )
$10.99
—
$24.99
King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.
( 85 )
$12.50
—
$21.99
If you're building up a Dart block and want the best bearings with the correct sizing, then you'll want Dart cam bearings. They're fully grooved, made from steel-backed babbit, and specifically designed for high performance use. To all of this, Dart adds their own moly-PTFE coating for even better performance and durability. This coating is approximately 0.0005 in. thick, which translates into 0.001 in. less overall clearance.
( 34 )
$18.60
—
$19.77
Engine Works rod bearing sets are quality bearing sets available in various series and clearances. Offered in bi-metal or Alecular tri-metal construction, these rod bearing sets also come in a variety of clearance options from standard through .030 in., with a .001 in. X-clearance available on some sets. When you want high-quality and high-value parts for your performance vehicle, Engine Works delivers. Check availability and order the set recommended for your ride.
Not Yet Reviewed
$17.46
Edelrock cam bearings are the replacements for your LS aluminum race block. They feature steel-backed Babbitt bearing material. When parts wear out, Edelbrock has what you need to maintain optimum performance.
Not Yet Reviewed
$12.95
Mopar Replacement connecting rod bearings are direct-fit OEM replacements that will provide the matching fit and function of your originals. Worn bearings can cause poor operation and unwanted noises. For the most dependable, reliable service of your Chrysler, Dodge, or Jeep vehicle, choose genuine Mopar crankshaft main bearings to restore performance.
Not Yet Reviewed
$24.99
Howards Cams and Racing Components offers camshaft thrust washer bearings for a variety of applications, including many Chevrolet and Ford engines from the 1950s and up. These replacements act as a bearing surface for components to rotate, transmitting and absorbing excess force to reduce friction and wear so that the components can move smoothly. They're made from factory materials and specifications to ensure proper fit and performance. Order the bearings recommended for your vehicle.
( 1 )
$21.99
Dura-Bond Universal HP cam bearings are ideal for racing. These high performance replacements offer double the fatigue strength of standard bearings, withstand racing spring loads, and maintain the excellent surface characteristics of Babbit. They're available in a dozens of size options, with or without a groove.
Not Yet Reviewed
$21.99
King AM-Series main bearings are recommended for street or marine applications. These crankshaft bearings have superior embeddability, which provides greater macro-particle to reduce scratching of the crank journals and tearing or weakening of the Babbitt overlays. King AM-Series main bearings feature tolerance control to within plus or minus .0001—and they're lead-free, making them environmentally-friendly and user-safe. Hundreds of performance sets are available; order the replacement bearings designed to fit your vehicle.
( 32 )
$11.99
—
$22.99
OMIX-ADA rod bearings offer aluminum OE features with reliable performance. Their selection is available in various quantities to fill your many applications. Whether you are rebuilding or restoring an early CJ or a newer Grand Cherokee, OMIX-ADA rod bearings will be a perfect fit.
( 1 )
$10.99
—
$21.99
Dura-Bond Universal HP coated cam bearings are ideal for racing. These high performance bearings offer double the fatigue strength of standard bearings, withstand racing spring loads, and maintain the excellent surface characteristics of Babbit. The bearings have a Fluoropolymer dry lubricant that penetrates the surface where it's been applied. This coating allows the bearings to retain engine oil on the surface, even under extreme heat and pressure conditions. They're available in a variety of size options, with or without a groove.
( 1 )
$13.99
Sealed Power engine products are a complete system of application-engineered replacement components, including pistons, piston rings, engine bearings, camshafts, oil pumps, timing components and valvetrain products. Sealed Power connecting rod bearings are available with different linings to meet every engine's needs. They're made using either tri-metal or aluminum bi-metal construction for the utmost in performance and durability for all stock rebuilds and mild performance applications. Tri-metal alloys feature a steel base coated with a sintered layer of copper-lead alloy, followed by layers of electro-plated nickel and babbit to produce the ultimate bearings. Bi-metal aluminum types carry all of the same features without the babbit, as specified by many of today's top engine builders. Sealed Power bearings are available for a multitude of engines in sizes ranging from standard to 0.060 in. oversized.
( 8 )
$14.99
On Sale
BoostLine connecting rods include pin bushings; they also offer wrist pin bushings separately as replacements to service your rods. They are high-quality APMCO bronze pin bushings—a must for your high performance application. Choose the inside diameter needed.
Not Yet Reviewed
$19.95
$17.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
