BUICK SKYHAWK Bearings & Bearing Spacers Engines & Components

Sealed Power CP-Series Rod Bearings

Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.

4.6 out of 5 stars ( 121 )

$6.99

—

$7.99

Sealed Power Main Bearing Sets

Today's engines operate under very demanding conditions. When these Sealed Power main bearing sets are used in performance applications, all components are pushed to their limits—and many must be changed to meet these special demands. Federal Mogul, a longtime supplier to both OEM and the aftermarket, has responded to this challenge with its tri-metal, copper-lead, high performance main bearing sets. They're tested in the lab and proven on the track. The bearings are available for various crankshaft undersizes, for direct replacement or performance usage on a wide range of specific applications.

4.45 out of 5 stars ( 98 )

$121.99

Clevite P-Series Main Bearings

Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.

4.57 out of 5 stars ( 255 )

$68.99

—

$89.99

Clevite H-Series Rod Bearings

Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.

4.8 out of 5 stars ( 170 )

$17.99

King SI-Series Rod Bearings

King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.

4.57 out of 5 stars ( 103 )

$8.99

—

$21.99

Sealed Power A-Series Rod Bearings

Sealed Power A-Series rod bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank with a surface that hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better wall variance control. It also helps to minimize debris embedding, which can score the crank's surface. Order the replacement bearings designed for your vehicle make and engine application.

4.49 out of 5 stars ( 35 )

$12.99

Sealed Power MA Series Main Bearings

These Sealed Power MA Series main bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank whose surface hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better control of wall variance. It also helps to minimize debris embedding, which can score the crank's surface.

4.3 out of 5 stars ( 76 )

$60.99

—

$73.99

Clearance

King AM-Series Main Bearings

King AM-Series main bearings are recommended for street or marine applications. These crankshaft bearings have superior embeddability, which provides greater macro-particle to reduce scratching of the crank journals and tearing or weakening of the Babbitt overlays. King AM-Series main bearings feature tolerance control to within plus or minus .0001—and they're lead-free, making them environmentally-friendly and user-safe. Hundreds of performance sets are available; order the replacement bearings designed to fit your vehicle.

4.24 out of 5 stars ( 33 )

$35.99

—

$52.99

Enginetech Main Bearings

Enginetech main bearings are made of high-quality alloys, based on the application requirement. Manufactured on state-of-the-art equipment, this ensures consistent bearing thickness for proper oil clearances, and parting line chamfers are precisely controlled, guaranteeing they are cut at the correct angle to allow for the proper amount of oil bleed-through without reducing oil pressure. Thrust washers are included, where appropriate, when they are not already molded into the main bearing. The materials are high strength (load capacity), but also have good anti-friction properties (wear resistance, anti-seizure, and embeddability). Enginetech main bearings provide extra protection and better durability within your rebuild. Select the size needed.

Not Yet Reviewed

$37.99

—

$54.99

King AM-Series Rod Bearings

King AM-Series rod bearings are recommended for street or marine applications. They have superior embeddability, which provides greater macro-particle and reduces scratching of the crank journals and tearing or weakening of the Babbitt overlays. The direct replacements feature tolerance control up to +/- .0001—and they're lead-free, making them environmentally friendly and user-safe. Order the King AM-Series rod bearings in the application designed for proper fitment with your vehicle.

4.0 out of 5 stars ( 30 )

$15.99

—

$18.99

Enginetech Rod Bearings

Enginetech rod bearings are made of high-quality alloys, based on the application requirement. They are made on state of the art equipment, ensuring consistent bearing thickness for proper oil clearances, and parting line chamfers are precisely controlled, ensuring they are cut at the correct angle to allow for the proper amount of oil bleed-through without reducing oil pressure. The materials are high strength (load capacity), but also have good anti-friction properties (wear resistance, anti-seizure, and embeddability). Enginetech rod bearings provide extra protection and better durability within your rebuild. Select the size needed.

Not Yet Reviewed

$17.99

—

$37.99

Enginetech Cam Bearings

Enginetech offers cam bearings for a variety of applications, including many Chevy small block V8 engines from the 1960s, '70s, '80s, and '90s. Enginetech camshaft bearings are manufactured as a "full round" design. They're produced from extruded steel tubes with a centrifugally cast Babbitt lining. Several different grades of Babbitt are used depending on the application. Engines with inherent OE problems of bearing wiping and/or fatiguing utilize a high-grade ASTM-14 material. Order the replacement set recommended for your engine.

Not Yet Reviewed

$15.99

—

$21.99

King XP-Series Rod Bearings

King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.

4.53 out of 5 stars ( 73 )

$78.99