Availability
Showing In Stock Items. Show All 118 Items.
On Sale
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 70 )
$1,936.99
—
$4,785.99
$1,736.99
—
$4,585.99
On Sale
Start your next engine build with one of these ATK High Performance Chevy LQ4 6.0L short blocks. The LQ4 is an ultra-tough basis for high-horsepower engines in their stock form, but ATK improved on it. These engines are hand-built, balanced, and blueprinted using top-quality parts. Don't waste time trying to salvage a high-mileage short block when you can get a fresh mill that is ready for your choice of components to make it your own. These ATK High Performance Chevy LQ4 6.0L short blocks include the following: * Handpicked and seasoned 6-bolt main block * Aligned and honed main bores * OE steel crankshaft * 3.622 in. stroke * OE connecting rods * Hypereutectic dish top pistons
( 1 )
$3,198.99
$2,998.99
On Sale
Summit Racing™ OEM LS valve covers make a great choice to service and maintain your vehicle's LS engine. They are made from premium materials to OEM specifications for proper fit and performance, as well as good looks under the hood. Choose the replacement valve covers for your application.
( 5 )
$71.99
—
$80.99
$66.99
—
$76.99
On Sale
Holley aluminum LS valve covers will give your Chevrolet LS Series engines a totally new look. Manufactured from cast aluminum, they come in four different finishes, and feature a billet aluminum oil fill cap. Some valve covers in this series eliminate the need for the factory ignition coil bracket. Instead, the coils bolt directly to the valve covers for a nice angled look! Holley aluminum LS valve covers reuse the factory gaskets and bolts, will work with .750 in. lift camshafts using stock-style rocker arms, and fit all ignition coils with 72mm spacing.
( 142 )
$267.95
—
$849.95
$147.95
—
$552.95
On Sale
Summit Racing™ forged crankshafts offer maximum strength and the best value for your dollar! Our crankshafts are non-twist forged from certified 4340 steel. They are put through several stages of heat-treatment, and then stress-relieved and shot-peened to provide the strength and reliability you demand for your high performance application. Each journal is micro-polished and a .125 in. radius is used for increased strength. Summit Racing™ forged crankshafts help you get the most in value and performance.
( 10 )
$889.99
—
$1,029.99
$849.99
—
$949.99
On Sale
Summit Racing™ Extreme Duty cylinder head stud kits are engineered to withstand the stress and abuses that high-horsepower engines endure. These fastener kits come with all necessary studs, nuts, washers, lubricant, and instructions to ensure maximum performance and reliability. Order the hardware recommended for your year/make and engine application. Extreme Duty fasteners feature: * 190,000 psi tensile strength minimum * High-strength chromoly steel utilized for all products * Precision manufacturing processes ensure consistent product performance * All studs are twice straightened to guarantee straightness * Threads are rolled after heat treatment for high strength * Tensile and yield strength tested after thread rolling * Uniformly applied black oxide surface finish * Anti-rust oil coating to protect fasteners from corrosion
( 2 )
$399.99
—
$499.99
$349.99
—
$449.99
On Sale
Summit Racing™ Pro Hemi Non-MDS swap camshafts are made from high-quality bearing steel cores. They are precision ground and finished on modern CNC grinders to provide you with a premium replacement cam. Choose the model that fits your engine and make sure to use with Non-MDS lifters.
( 1 )
$349.99
$299.99
On Sale
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 246 )
$470.95
$306.95
On Sale
VEGE Remanufactured cylinder heads are a popular choice for performance and value. With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured cylinder heads with a level of quality that equals that of new OEM products—at extremely competitive prices. The rebuilt cylinder heads are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include a cast iron or aluminum cylinder head, intake and exhaust valves, valve springs, retainers, locks, stem seals, rocker arm studs, and more. Many heads include rocker arms. Nearly a thousand models are available, for fitment on countless applications.
( 40 )
$244.99
—
$690.99
$194.99
—
$640.99
On Sale
Holley LS engine alternator and power steering brackets are designed to help you get your alternator and power steering pump mounted in the proper location. They include the necessary hardware to mount the assembly in place. An application-specific installation kit may be required, and must be purchased separately if needed.
( 13 )
$299.95
$194.95
On Sale
Holley Sniper fabricated aluminum valve covers deliver high-end looks without the high-end price! They're constructed from 6061 T-5 sheet aluminum and precision TIG-welded for a proper fit. Plus, they feature thick one-piece CNC billet flanges for superior sealing. Sniper valve covers are available in your choice of natural or black powdercoat finishes, as well as with or without breather openings—and heights to clear most popular rocker arm combinations. Holley includes mounting hardware for quick and simple installation. Order a pair for fitment on your particular engine application.
( 86 )
$191.95
—
$333.95
$105.95
—
$217.95
On Sale
Mopar's popular Gen III Hemi engines are ideal for swapping into muscle cars since they are durable, reliable, and make great power. The factory oil pans that come on these engines usually do not fit and hang too low for your swap. Holley Gen III Hemi retrofit oil pans' cast aluminum construction and integrated windage tray combined with the O-ring sealing provide an attractive leak-free solution for your engine swap. With the included pickup assembly and mounting bolts, Holley Gen III Hemi mid-sump engine swap oil pans have everything you need for installation.
( 7 )
$522.95
$339.95
On Sale
Summit Racing™ Pro LS T6 single and twin turbo cams have increased overlap from the standard turbo cams to take advantage of the better turbine housing flow. As a result, these cams will increase RPM and work with larger cubic inches better in race applications where an open front exit exhaust is utilized.
Not Yet Reviewed
$349.99
$299.99
On Sale
ATK High Performance Engines offers GM 350 Vortec bare blocks with the following specifications: * Block: 100 percent new bare block with one-piece rear main seal * Bore: 4.000 in. (4.0003-4.0008 in. -- Pistons size vary, final honing may be required) * Maximum bore: 4.060 in. recommended * Displacement: 350 cu. in. * Main journal type: Chevy 350 * Engine block material: Premium iron alloy * Engine block style: Aftermarket, based off the Vortec 350 roller block * Engine block deck height: Standard deck * Engine oiling system: Priority main * Fuel pump boss: Yes * Main bolt style: 4-bolt * Main caps included: Yes * Main cap material: Cast iron * Main cap fasteners included: Yes * Main bearings included: No * Camshaft bearings: Dura-Bond, installed and clocked to OEM position * Freeze plugs: Brass, installed and sealed * Oil galley plugs: Installed and sealed * Roller camshaft compatible: Yes * Stroker clearanced: Yes, but the assembler must always check, as components differ
Not Yet Reviewed
$1,898.99
$1,698.99
On Sale
Holley LS engine accessory drive kits offer simple, clean, cost-effective solutions when swapping a GM LS engine into a muscle car, truck, hot rod, or any other vehicle. These bracket kits deliver a factory-style appearance, correct belt alignment, and factory stability. They fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets—reducing cost and complexity. Holley LS engine accessory drive kits position the A/C compressor high above the crossmember, but below the hood line, for an easy installation. The brackets are manufactured from diecast aluminum with a natural, polished, or black finish. (An application-specific installation kit is required, but sold separately.)
( 52 )
$159.95
—
$603.95
$87.95
—
$332.95
On Sale
JET underdrive pulley sets reclaim lost horsepower and mileage by reducing the drag placed on the engine to drive the accessories, such as the air conditioning, power steering, and water pump. The pulleys slow down these accessories to allow the engine to turn with less effort without any adverse effect on the operation of A/C, power steering, charging, or cooling systems. Installation consists of simple bolt-on replacement of the stock pulleys. Kits include pulleys, hardware, complete instructions, and part number for new serpentine belt as most kits will require use of smaller size belt. Belt is not included with kit. The number and type of pulleys will vary per application.
( 14 )
$176.99
—
$472.46
$159.29
—
$425.21
On Sale
ATK offers select parts for your build, including cylinder heads. They use them in their engine combinations and are available to complete your small block Ford engine or upgrade existing components. ATK High Performance 205cc SBF aluminum cylinder head features: * A356 aluminum construction * Stainless steel intake and exhaust valves * Manganese Bronze valve guides * Viton® valve seal * Powder meatal valve seats * Steel retainers with 7-degree bead lock keepers * Spark plug dimensions: 14mm x .750 in. with gasket seat * Head bolt diameter: 1/2 in.
Not Yet Reviewed
$698.99
$648.99
On Sale
Holley offers LS swap 4WD truck off-road oil pan baffles for a variety of trucks, including many Chevy and GMC models from the 1970s and '80s. They take Holley's popular cast aluminum oil pans (P/N 302-4 and 302-4BK) designed to swap LS engines into K10s and other trucks to a whole new level. Vehicles that endure prolonged sessions of climbing, crawling, braking, turning, and accelerating need extra protection from oil starvation. That's where these baffle kits come in. They improve upon the baffle included with those pans, maintain proper oil level at the oil pump pick-up during vehicle elevation and grade changes, accelerations, both lateral and linear, and braking. This prevents loss of engine oil pressure during off-road excursions as well as during hard acceleration. Each baffle is fabricated from sheet aluminum joined by TIG-welded joints. Directionally positioned one-way trap doors allow oil flow toward the oil pump pick-up but not away. These direct bolt-in baffles are designed to be used in the Holley P/N 302-4 and 302-4BK LS Swap oil pan with the standard pickup, and are a drop-in replacement for the standard tray baffle. They're great for street, race, and off-road applications.
Not Yet Reviewed
$217.95
$141.95
On Sale
Racing Automotive Group power steering pulleys are available in V-belt and serpentine options. Both feature lightweight aluminum construction and a black anodized finish. They are the perfect-fit replacements for your Racing Automotive Group power steering pump.
( 1 )
$49.99
—
$59.99
$44.99
—
$53.99
On Sale
Earl's Performance oil cooler adapters replace the OEM oil filter housing. These oil filter bypass adapters allow for the installation of a remote oil filter and optional oil cooler. Their billet construction is black anodized and stainless hardware is included. They use O-ring seals for a leak-free installation.
( 15 )
$179.95
$98.95
On Sale
Green Filter valve cover breathers are manufactured from recycled materials. They're made with deep double-layered cotton pleats that are encased in steel wire mesh and set in hand-molded flexible rubber bases for an airtight seal. The breathers are washable and reusable—and available in a variety of sizes and attachment styles.
( 4 )
$20.41
$18.37
On Sale
Outfit your top end with a set of these assembled ATK High Performance aluminum cylinder heads for small block Chevrolet. They're cast, machined, and assembled with A356 aluminum alloy. The heads feature the latest port designs for maximum efficiency and increased power, and improved stock exhaust port location for better header fitment. ATK High Performance aluminum cylinder heads for small block Chevrolet include: * 2.020 in. stainless steel, swirl polished with undercut stem intake valves * 1.600 in. stainless steel, swirl polished with undercut stem exhaust valves * Manganese bronze valve guides * Alloy valve seats * 1.437 in. diameter valve springs (.600 in. max valve lift) * Chromoly 7-degree valve spring retainers * Single groove 7-degree valve locks * Valve spring locators * 5/16 in. flat pushrod guideplates * 3/8-24 in. rocker arm studs
Not Yet Reviewed
$798.99
$748.99
On Sale
Holley long spacer power steering brackets are available for GM LT4 and LT5 systems. These accessory drive brackets feature aluminum construction and are available with a black or natural finish. Select the one designed for your drive system in the finish preferred.
Not Yet Reviewed
$228.95
$125.95
On Sale
Holley alternator brackets are the perfect solution to mounting your alternator when a new brackets is needed. Made from high-quality materials and available in multiple finishes Holley alternator brackets will look great under the hood of any show car. Order the model recommended for your engine application.
( 2 )
$181.95
$100.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
